diff options
| author | Robert Winkler <robert.winkler@boundarydevices.com> | 2014-10-02 12:16:31 -0700 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2014-10-06 17:57:21 +0200 |
| commit | 4328fb05bf8c90e96afa023d39395efa5fb2fda5 (patch) | |
| tree | fa7df6dc580ee079adb0047766a1fff20404b8e0 /board/boundary/nitrogen6x | |
| parent | 84caf0b26b513df0a0f45832d053a623963e5c6f (diff) | |
nitrogen6x: display: add support lvds jeida screen
Add support for Boundary Devices 7" and 10.1" 1280x800 displays with
integrated FocalTech ft5x06 10-point touch controller.
Because they share the touch controller with the 1024x600 displays,
auto-detection is disabled and you must explicitly set the 'panel'
environment variable:
U-Boot > setenv panel LDB-WXGA
U-Boot > saveenv && reset
Signed-off-by: Robert Winkler <robert.winkler@boundarydevices.com>
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Diffstat (limited to 'board/boundary/nitrogen6x')
| -rw-r--r-- | board/boundary/nitrogen6x/nitrogen6x.c | 31 |
1 files changed, 31 insertions, 0 deletions
diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 67d4154480..39e8013480 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -474,6 +474,17 @@ static void enable_lvds(struct display_info_t const *dev) gpio_direction_output(LVDS_BACKLIGHT_GP, 1); } +static void enable_lvds_jeida(struct display_info_t const *dev) +{ + struct iomuxc *iomux = (struct iomuxc *) + IOMUXC_BASE_ADDR; + u32 reg = readl(&iomux->gpr[2]); + reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT + |IOMUXC_GPR2_BIT_MAPPING_CH0_JEIDA; + writel(reg, &iomux->gpr[2]); + gpio_direction_output(LVDS_BACKLIGHT_GP, 1); +} + static void enable_rgb(struct display_info_t const *dev) { imx_iomux_v3_setup_multiple_pads( @@ -503,6 +514,26 @@ struct display_info_t const displays[] = {{ .sync = FB_SYNC_EXT, .vmode = FB_VMODE_NONINTERLACED } }, { + .bus = 0, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = NULL, + .enable = enable_lvds_jeida, + .mode = { + .name = "LDB-WXGA", + .refresh = 60, + .xres = 1280, + .yres = 800, + .pixclock = 14065, + .left_margin = 40, + .right_margin = 40, + .upper_margin = 3, + .lower_margin = 80, + .hsync_len = 10, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED +} }, { .bus = 2, .addr = 0x4, .pixfmt = IPU_PIX_FMT_LVDS666, |