* Patch by Andrea Scian, 17 Feb 2004:

  Add support for S3C44B0 processor and DAVE B2 board

* Patch by Steven Scholz, 20 Feb 2004:
  - Add support for MII commands on AT91RM9200 boards
  - some cleanup in AT91RM9200 ethernet code

1 files changed, 167 insertions, 0 deletions

diff --git a/board/dave/B2/memsetup.S b/board/dave/B2/memsetup.S
new file mode 100644
index 0000000000..3f64cb3749
--- /dev/null
+++ b/board/dave/B2/memsetup.S
@@ -0,0 +1,167 @@
+/*
+ * (C) Copyright 2004
+ * DAVE Srl
+ *
+ * http://www.dave-tech.it
+ * http://www.wawnet.biz
+ * mailto:info@wawnet.biz
+ *
+ * memsetup-sa1110.S (blob): memory setup for various SA1110 architectures
+ * Modified By MATTO
+ *
+ * Copyright (C) 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+/*
+ * Documentation:
+ * Intel Corporation, "Intel StrongARM SA-1110 Microprocessor
+ *     Advanced Developer's manual, December 1999
+ *
+ * Intel has a very hard to find SDRAM configurator on their web site:
+ *   http://appzone.intel.com/hcd/sa1110/memory/index.asp
+ *
+ * NOTE: This code assumes that an SA1110 CPU *always* uses SDRAM. This
+ * appears to be true, but it might be possible that somebody designs a
+ * board with mixed EDODRAM/SDRAM memory (which is a bad idea). -- Erik
+ *
+ * 04-10-2001:  SELETZ
+ * - separated memory config for multiple platform support
+ * - perform SA1110 Hardware Reset Procedure
+ *
+ */
+
+.equ    B0_Tacs,      0x0 /* 0clk */
+.equ    B0_Tcos,      0x0 /* 0clk */
+.equ    B0_Tacc,      0x4 /* 6clk */
+.equ    B0_Tcoh,      0x0 /* 0clk */
+.equ    B0_Tah,       0x0 /* 0clk */
+.equ    B0_Tacp,      0x0 /* 0clk */
+.equ    B0_PMC,       0x0 /* normal(1data) */
+/* Bank 1 parameter */
+.equ    B1_Tacs,      0x3 /* 4clk */
+.equ    B1_Tcos,      0x3 /* 4clk */
+.equ    B1_Tacc,      0x7 /* 14clkv */
+.equ    B1_Tcoh,      0x3 /* 4clk */
+.equ    B1_Tah,       0x3 /* 4clk */
+.equ    B1_Tacp,      0x3 /* 6clk */
+.equ    B1_PMC,       0x0 /* normal(1data) */
+
+/* Bank 2 parameter - LAN91C96 */
+.equ    B2_Tacs,      0x3 /* 4clk */
+.equ    B2_Tcos,      0x3 /* 4clk */
+.equ    B2_Tacc,      0x7 /* 14clk */
+.equ    B2_Tcoh,      0x3 /* 4clk */
+.equ    B2_Tah,       0x3 /* 4clk */
+.equ    B2_Tacp,      0x3 /* 6clk */
+.equ    B2_PMC,       0x0 /* normal(1data) */
+
+/* Bank 3 parameter */
+.equ    B3_Tacs,      0x3 /* 4clk */
+.equ    B3_Tcos,      0x3 /* 4clk */
+.equ    B3_Tacc,      0x7 /* 14clk */
+.equ    B3_Tcoh,      0x3 /* 4clk */
+.equ    B3_Tah,       0x3 /* 4clk */
+.equ    B3_Tacp,      0x3 /* 6clk */
+.equ    B3_PMC,       0x0 /* normal(1data) */
+
+/* Bank 4 parameter */
+.equ    B4_Tacs,      0x3 /* 4clk */
+.equ    B4_Tcos,      0x3 /* 4clk */
+.equ    B4_Tacc,      0x7 /* 14clk */
+.equ    B4_Tcoh,      0x3 /* 4clk */
+.equ    B4_Tah,       0x3 /* 4clk */
+.equ    B4_Tacp,      0x3 /* 6clk */
+.equ    B4_PMC,       0x0 /* normal(1data) */
+
+/* Bank 5 parameter */
+.equ    B5_Tacs,      0x3 /* 4clk */
+.equ    B5_Tcos,      0x3 /* 4clk */
+.equ    B5_Tacc,      0x7 /* 14clk */
+.equ    B5_Tcoh,      0x3 /* 4clk */
+.equ    B5_Tah,       0x3 /* 4clk */
+.equ    B5_Tacp,      0x3 /* 6clk */
+.equ    B5_PMC,       0x0 /* normal(1data) */
+
+/* Bank 6(if SROM) parameter */
+.equ    B6_Tacs,      0x3 /* 4clk */
+.equ    B6_Tcos,      0x3 /* 4clk */
+.equ    B6_Tacc,      0x7 /* 14clk */
+.equ    B6_Tcoh,      0x3 /* 4clk */
+.equ    B6_Tah,       0x3 /* 4clk */
+.equ    B6_Tacp,      0x3 /* 6clk */
+.equ    B6_PMC,       0x0 /* normal(1data) */
+
+/* Bank 7(if SROM) parameter */
+.equ    B7_Tacs,      0x3 /* 4clk */
+.equ    B7_Tcos,      0x3 /* 4clk */
+.equ    B7_Tacc,      0x7 /* 14clk */
+.equ    B7_Tcoh,      0x3 /* 4clk */
+.equ    B7_Tah,       0x3 /* 4clk */
+.equ    B7_Tacp,      0x3 /* 6clk */
+.equ    B7_PMC,       0x0 /* normal(1data) */
+
+/* Bank 6 parameter */
+.equ    B6_MT,        0x3 /* SDRAM */
+.equ    B6_Trcd,      0x0 /* 2clk */
+.equ    B6_SCAN,      0x0 /* 10bit */
+
+.equ    B7_MT,        0x3 /* SDRAM */
+.equ    B7_Trcd,      0x0 /* 2clk */
+.equ    B7_SCAN,      0x0 /* 10bit */
+
+
+/* REFRESH parameter */
+.equ    REFEN,        0x1 /* Refresh enable */
+.equ    TREFMD,       0x0 /* CBR(CAS before RAS)/Auto refresh */
+.equ    Trp,        0x0 /* 2clk */
+.equ    Trc,        0x3 /* 0x1=5clk 0x3=11clk*/
+.equ    Tchr,       0x0 /* 0x2=3clk 0x0=0clks  */
+.equ    REFCNT,       879
+
+MEMORY_CONFIG:
+  .long   0x12111900 /* Bank0 = OM[1:0] , Bank1-7 16bit, Bank2=Nowait,UB/LB*/
+  .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /*GCS0*/
+  .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /*GCS1*/
+  .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /*GCS2*/
+  .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /*GCS3*/
+  .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /*GCS4*/
+  .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /*GCS5*/
+  .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))  /*GCS6*/
+  .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))  /*GCS7*/
+  .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)  /*REFRESH RFEN=1, TREFMD=0, trp=3clk, trc=5clk, tchr=3clk,count=1019*/
+  .word 0x17      /*SCLK power down mode, BANKSIZE 16M/16M*/
+  .word 0x20      /*MRSR6 CL=2clk*/
+  .word 0x20      /*MRSR7*/
+
+
+.globl memsetup
+memsetup:
+
+	/*
+		the next instruction fail due memory relocation...
+		we'll find the right MEMORY_CONFIG address with the next 3 lines...
+	*/
+	/*ldr r0, =MEMORY_CONFIG*/
+	mov r0, pc
+	ldr r1, =(0x38+4)
+	sub r0, r0, r1
+
+	ldmia r0, {r1-r13}
+	ldr   r0, =0x01c80000
+	stmia r0, {r1-r13}
+	mov pc, lr