arm: Remove unmaintained davinci boards

These boards have not been converted to generic board by the deadline.
Remove dm355evm, dm355leopard, dm365evm, dm6467evm, dvevm, ea20, schmoogie,
sffsdr, sonata.

Signed-off-by: Simon Glass <sjg@chromium.org>

6 files changed, 0 insertions, 203 deletions

diff --git a/board/davinci/schmoogie/Kconfig b/board/davinci/schmoogie/Kconfig
deleted file mode 100644
index 35810755f9..0000000000
--- a/board/davinci/schmoogie/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_DAVINCI_SCHMOOGIE
-
-config SYS_BOARD
-	default "schmoogie"
-
-config SYS_VENDOR
-	default "davinci"
-
-config SYS_CONFIG_NAME
-	default "davinci_schmoogie"
-
-endif
diff --git a/board/davinci/schmoogie/MAINTAINERS b/board/davinci/schmoogie/MAINTAINERS
deleted file mode 100644
index 808e7fc046..0000000000
--- a/board/davinci/schmoogie/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-SCHMOOGIE BOARD
-#M:	-
-S:	Maintained
-F:	board/davinci/schmoogie/
-F:	include/configs/davinci_schmoogie.h
-F:	configs/davinci_schmoogie_defconfig
diff --git a/board/davinci/schmoogie/Makefile b/board/davinci/schmoogie/Makefile
deleted file mode 100644
index e170d551ff..0000000000
--- a/board/davinci/schmoogie/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= schmoogie.o
-obj-y	+= board_init.o
diff --git a/board/davinci/schmoogie/board_init.S b/board/davinci/schmoogie/board_init.S
deleted file mode 100644
index ded0590084..0000000000
--- a/board/davinci/schmoogie/board_init.S
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Board-specific low level initialization code. Called at the very end
- * of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
- * initialization required.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-
-.globl	dv_board_init
-dv_board_init:
-
-	mov	pc, lr
diff --git a/board/davinci/schmoogie/config.mk b/board/davinci/schmoogie/config.mk
deleted file mode 100644
index ed80707231..0000000000
--- a/board/davinci/schmoogie/config.mk
+++ /dev/null
@@ -1,39 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# (C) Copyright 2003
-# Texas Instruments, <www.ti.com>
-# Swaminathan <swami.iyer@ti.com>
-#
-# Davinci EVM board (ARM925EJS) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# Davinci EVM has 1 bank of 256 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 9000'0000
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# Visioneering Corp. Sonata board (ARM926EJS) cpu
-#
-# Sonata board has 1 bank of 128 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 8800'0000
-#
-# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu
-#
-# Schmoogie board has 1 bank of 128 MB DDR RAM
-# Physical Address:
-# 8000'0000 to 8800'0000
-#
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-#
-# we load ourself to 8108 '0000
-#
-#
-
-#Provide at least 16MB spacing between us and the Linux Kernel image
-CONFIG_SYS_TEXT_BASE = 0x81080000
diff --git a/board/davinci/schmoogie/schmoogie.c b/board/davinci/schmoogie/schmoogie.c
deleted file mode 100644
index 741afc4df3..0000000000
--- a/board/davinci/schmoogie/schmoogie.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Parts are shamelessly stolen from various TI sources, original copyright
- * follows:
- * -----------------------------------------------------------------
- *
- * Copyright (C) 2004 Texas Instruments.
- *
- * ----------------------------------------------------------------------------
- * SPDX-License-Identifier:	GPL-2.0+
- * ----------------------------------------------------------------------------
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/davinci_misc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
-	/* Configure AEMIF pins (although this should be configured at boot time
-	 * with pull-up/pull-down resistors) */
-	REG(PINMUX0) = 0x00000c1f;
-
-	davinci_errata_workarounds();
-
-	/* Power on required peripherals */
-	lpsc_on(DAVINCI_LPSC_GPIO);
-
-#if !defined(CONFIG_SYS_USE_DSPLINK)
-	/* Powerup the DSP */
-	dsp_on();
-#endif /* CONFIG_SYS_USE_DSPLINK */
-
-	davinci_enable_uart0();
-	davinci_enable_emac();
-	davinci_enable_i2c();
-
-	lpsc_on(DAVINCI_LPSC_TIMER1);
-	timer_init();
-
-	return(0);
-}
-
-int misc_init_r(void)
-{
-	u_int8_t	tmp[20], buf[10];
-	int		i = 0;
-
-	/* Set serial number from UID chip */
-	const u_int8_t	crc_tbl[256] = {
-			0x00, 0x5e, 0xbc, 0xe2, 0x61, 0x3f, 0xdd, 0x83,
-			0xc2, 0x9c, 0x7e, 0x20, 0xa3, 0xfd, 0x1f, 0x41,
-			0x9d, 0xc3, 0x21, 0x7f, 0xfc, 0xa2, 0x40, 0x1e,
-			0x5f, 0x01, 0xe3, 0xbd, 0x3e, 0x60, 0x82, 0xdc,
-			0x23, 0x7d, 0x9f, 0xc1, 0x42, 0x1c, 0xfe, 0xa0,
-			0xe1, 0xbf, 0x5d, 0x03, 0x80, 0xde, 0x3c, 0x62,
-			0xbe, 0xe0, 0x02, 0x5c, 0xdf, 0x81, 0x63, 0x3d,
-			0x7c, 0x22, 0xc0, 0x9e, 0x1d, 0x43, 0xa1, 0xff,
-			0x46, 0x18, 0xfa, 0xa4, 0x27, 0x79, 0x9b, 0xc5,
-			0x84, 0xda, 0x38, 0x66, 0xe5, 0xbb, 0x59, 0x07,
-			0xdb, 0x85, 0x67, 0x39, 0xba, 0xe4, 0x06, 0x58,
-			0x19, 0x47, 0xa5, 0xfb, 0x78, 0x26, 0xc4, 0x9a,
-			0x65, 0x3b, 0xd9, 0x87, 0x04, 0x5a, 0xb8, 0xe6,
-			0xa7, 0xf9, 0x1b, 0x45, 0xc6, 0x98, 0x7a, 0x24,
-			0xf8, 0xa6, 0x44, 0x1a, 0x99, 0xc7, 0x25, 0x7b,
-			0x3a, 0x64, 0x86, 0xd8, 0x5b, 0x05, 0xe7, 0xb9,
-			0x8c, 0xd2, 0x30, 0x6e, 0xed, 0xb3, 0x51, 0x0f,
-			0x4e, 0x10, 0xf2, 0xac, 0x2f, 0x71, 0x93, 0xcd,
-			0x11, 0x4f, 0xad, 0xf3, 0x70, 0x2e, 0xcc, 0x92,
-			0xd3, 0x8d, 0x6f, 0x31, 0xb2, 0xec, 0x0e, 0x50,
-			0xaf, 0xf1, 0x13, 0x4d, 0xce, 0x90, 0x72, 0x2c,
-			0x6d, 0x33, 0xd1, 0x8f, 0x0c, 0x52, 0xb0, 0xee,
-			0x32, 0x6c, 0x8e, 0xd0, 0x53, 0x0d, 0xef, 0xb1,
-			0xf0, 0xae, 0x4c, 0x12, 0x91, 0xcf, 0x2d, 0x73,
-			0xca, 0x94, 0x76, 0x28, 0xab, 0xf5, 0x17, 0x49,
-			0x08, 0x56, 0xb4, 0xea, 0x69, 0x37, 0xd5, 0x8b,
-			0x57, 0x09, 0xeb, 0xb5, 0x36, 0x68, 0x8a, 0xd4,
-			0x95, 0xcb, 0x29, 0x77, 0xf4, 0xaa, 0x48, 0x16,
-			0xe9, 0xb7, 0x55, 0x0b, 0x88, 0xd6, 0x34, 0x6a,
-			0x2b, 0x75, 0x97, 0xc9, 0x4a, 0x14, 0xf6, 0xa8,
-			0x74, 0x2a, 0xc8, 0x96, 0x15, 0x4b, 0xa9, 0xf7,
-			0xb6, 0xe8, 0x0a, 0x54, 0xd7, 0x89, 0x6b, 0x35
-		};
-
-	/* Set serial number from UID chip */
-	if (i2c_read(CONFIG_SYS_UID_ADDR, 0, 1, buf, 8)) {
-		printf("\nUID @ 0x%02x read FAILED!!!\n", CONFIG_SYS_UID_ADDR);
-		setenv("serial#", "FAILED");
-	} else {
-		if (buf[0] != 0x70) {
-			/* Device Family Code */
-			printf("\nUID @ 0x%02x read FAILED!!!\n", CONFIG_SYS_UID_ADDR);
-			setenv("serial#", "FAILED");
-		}
-	}
-	/* Now check CRC */
-	tmp[0] = 0;
-	for (i = 0; i < 8; i++)
-		tmp[0] = crc_tbl[tmp[0] ^ buf[i]];
-
-	if (tmp[0] != 0) {
-		printf("\nUID @ 0x%02x - BAD CRC!!!\n", CONFIG_SYS_UID_ADDR);
-		setenv("serial#", "FAILED");
-	} else {
-		/* CRC OK, set "serial" env variable */
-		sprintf((char *)&tmp[0], "%02x%02x%02x%02x%02x%02x",
-			buf[6], buf[5], buf[4], buf[3], buf[2], buf[1]);
-		setenv("serial#", (char *)&tmp[0]);
-	}
-
-	return(0);
-}