ARM: mxs: Rename M28EVK

The board is now manufactured by Aries Embedded GmbH , rename it.

Signed-off-by: Marek Vasut <marex@denx.de>

6 files changed, 0 insertions, 425 deletions

diff --git a/board/denx/m28evk/Kconfig b/board/denx/m28evk/Kconfig
deleted file mode 100644
index dd4dc4d096..0000000000
--- a/board/denx/m28evk/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_M28EVK
-
-config SYS_BOARD
-	default "m28evk"
-
-config SYS_VENDOR
-	default "denx"
-
-config SYS_SOC
-	default "mxs"
-
-config SYS_CONFIG_NAME
-	default "m28evk"
-
-endif
diff --git a/board/denx/m28evk/MAINTAINERS b/board/denx/m28evk/MAINTAINERS
deleted file mode 100644
index b0535a9186..0000000000
--- a/board/denx/m28evk/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-M28EVK BOARD
-M:	Marek Vasut <marek.vasut@gmail.com>
-S:	Maintained
-F:	board/denx/m28evk/
-F:	include/configs/m28evk.h
-F:	configs/m28evk_defconfig
diff --git a/board/denx/m28evk/Makefile b/board/denx/m28evk/Makefile
deleted file mode 100644
index 5e890b1eaf..0000000000
--- a/board/denx/m28evk/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-ifndef	CONFIG_SPL_BUILD
-obj-y	:= m28evk.o
-else
-obj-y	:= spl_boot.o
-endif
diff --git a/board/denx/m28evk/README b/board/denx/m28evk/README
deleted file mode 100644
index cb3ae20f86..0000000000
--- a/board/denx/m28evk/README
+++ /dev/null
@@ -1,13 +0,0 @@
-DENX M28EVK
-===========
-
-Files of the M28/M28EVK port
-----------------------------
-
-arch/arm/cpu/arm926ejs/mxs/	- The CPU support code for the Freescale i.MX28
-arch/arm/include/asm/arch-mxs/	- Header files for the Freescale i.MX28
-board/denx/m28evk/		- M28EVK board specific files
-include/configs/m28evk.h	- M28EVK configuration file
-
-Follow the instructions from doc/README.mxs to generate a bootable SD card or to
-boot from NAND flash.
diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c
deleted file mode 100644
index 33d38cfc54..0000000000
--- a/board/denx/m28evk/m28evk.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * DENX M28 module
- *
- * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- * on behalf of DENX Software Engineering GmbH
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux-mx28.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
-#include <linux/mii.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <errno.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Functions
- */
-int board_early_init_f(void)
-{
-	/* IO0 clock at 480MHz */
-	mxs_set_ioclk(MXC_IOCLK0, 480000);
-	/* IO1 clock at 480MHz */
-	mxs_set_ioclk(MXC_IOCLK1, 480000);
-
-	/* SSP0 clock at 96MHz */
-	mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
-	/* SSP2 clock at 160MHz */
-	mxs_set_sspclk(MXC_SSPCLK2, 160000, 0);
-
-#ifdef	CONFIG_CMD_USB
-	mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT);
-	mxs_iomux_setup_pad(MX28_PAD_AUART3_TX__GPIO_3_13 |
-			MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
-	gpio_direction_output(MX28_PAD_AUART3_TX__GPIO_3_13, 0);
-
-	mxs_iomux_setup_pad(MX28_PAD_AUART3_RX__GPIO_3_12 |
-			MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
-	gpio_direction_output(MX28_PAD_AUART3_RX__GPIO_3_12, 0);
-#endif
-
-	return 0;
-}
-
-int board_init(void)
-{
-	/* Adress of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	return mxs_dram_init();
-}
-
-#ifdef	CONFIG_CMD_MMC
-static int m28_mmc_wp(int id)
-{
-	if (id != 0) {
-		printf("MXS MMC: Invalid card selected (card id = %d)\n", id);
-		return 1;
-	}
-
-	return gpio_get_value(MX28_PAD_AUART2_CTS__GPIO_3_10);
-}
-
-int board_mmc_init(bd_t *bis)
-{
-	/* Configure WP as input. */
-	gpio_direction_input(MX28_PAD_AUART2_CTS__GPIO_3_10);
-	/* Turn on the power to the card. */
-	gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0);
-
-	return mxsmmc_initialize(bis, 0, m28_mmc_wp, NULL);
-}
-#endif
-
-#ifdef	CONFIG_CMD_NET
-
-#define	MII_OPMODE_STRAP_OVERRIDE	0x16
-#define	MII_PHY_CTRL1			0x1e
-#define	MII_PHY_CTRL2			0x1f
-
-int fecmxc_mii_postcall(int phy)
-{
-#if	defined(CONFIG_DENX_M28_V11) || defined(CONFIG_DENX_M28_V10)
-	/* KZ8031 PHY on old boards. */
-	const uint32_t freq = 0x0080;
-#else
-	/* KZ8021 PHY on new boards. */
-	const uint32_t freq = 0x0000;
-#endif
-
-	miiphy_write("FEC1", phy, MII_BMCR, 0x9000);
-	miiphy_write("FEC1", phy, MII_OPMODE_STRAP_OVERRIDE, 0x0202);
-	if (phy == 3)
-		miiphy_write("FEC1", 3, MII_PHY_CTRL2, 0x8100 | freq);
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	struct mxs_clkctrl_regs *clkctrl_regs =
-		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
-	struct eth_device *dev;
-	int ret;
-
-	ret = cpu_eth_init(bis);
-	if (ret)
-		return ret;
-
-	clrsetbits_le32(&clkctrl_regs->hw_clkctrl_enet,
-		CLKCTRL_ENET_TIME_SEL_MASK | CLKCTRL_ENET_CLK_OUT_EN,
-		CLKCTRL_ENET_TIME_SEL_RMII_CLK);
-
-#if !defined(CONFIG_DENX_M28_V11) && !defined(CONFIG_DENX_M28_V10)
-	/* Reset the new PHY */
-	gpio_direction_output(MX28_PAD_AUART2_RTS__GPIO_3_11, 0);
-	udelay(10000);
-	gpio_set_value(MX28_PAD_AUART2_RTS__GPIO_3_11, 1);
-	udelay(10000);
-#endif
-
-	ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE);
-	if (ret) {
-		printf("FEC MXS: Unable to init FEC0\n");
-		return ret;
-	}
-
-	ret = fecmxc_initialize_multi(bis, 1, 3, MXS_ENET1_BASE);
-	if (ret) {
-		printf("FEC MXS: Unable to init FEC1\n");
-		return ret;
-	}
-
-	dev = eth_get_dev_by_name("FEC0");
-	if (!dev) {
-		printf("FEC MXS: Unable to get FEC0 device entry\n");
-		return -EINVAL;
-	}
-
-	ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
-	if (ret) {
-		printf("FEC MXS: Unable to register FEC0 mii postcall\n");
-		return ret;
-	}
-
-	dev = eth_get_dev_by_name("FEC1");
-	if (!dev) {
-		printf("FEC MXS: Unable to get FEC1 device entry\n");
-		return -EINVAL;
-	}
-
-	ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
-	if (ret) {
-		printf("FEC MXS: Unable to register FEC1 mii postcall\n");
-		return ret;
-	}
-
-	return ret;
-}
-
-#endif
diff --git a/board/denx/m28evk/spl_boot.c b/board/denx/m28evk/spl_boot.c
deleted file mode 100644
index 5a1010e595..0000000000
--- a/board/denx/m28evk/spl_boot.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * DENX M28 Boot setup
- *
- * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- * on behalf of DENX Software Engineering GmbH
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <config.h>
-#include <asm/io.h>
-#include <asm/arch/iomux-mx28.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/sys_proto.h>
-
-#define	MUX_CONFIG_LED	(MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
-#define	MUX_CONFIG_LCD	(MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
-#define	MUX_CONFIG_TSC	(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
-#define	MUX_CONFIG_SSP0	(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
-#define	MUX_CONFIG_SSP2	(MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
-#define	MUX_CONFIG_GPMI	(MXS_PAD_1V8 | MXS_PAD_4MA | MXS_PAD_NOPULL)
-#define	MUX_CONFIG_ENET	(MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
-#define	MUX_CONFIG_EMI	(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
-
-const iomux_cfg_t iomux_setup[] = {
-	/* LED */
-	MX28_PAD_ENET0_RXD3__GPIO_4_10 | MUX_CONFIG_LED,
-
-	/* framebuffer */
-	MX28_PAD_LCD_D00__LCD_D0 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D01__LCD_D1 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D02__LCD_D2 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D03__LCD_D3 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D04__LCD_D4 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D05__LCD_D5 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D06__LCD_D6 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D07__LCD_D7 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D08__LCD_D8 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D09__LCD_D9 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D18__LCD_D18 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D19__LCD_D19 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D20__LCD_D20 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D21__LCD_D21 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D22__LCD_D22 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_D23__LCD_D23 | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MUX_CONFIG_LCD,
-	MX28_PAD_LCD_ENABLE__LCD_ENABLE | MUX_CONFIG_LCD,
-
-	/* UART1 */
-#ifdef	CONFIG_DENX_M28_V10
-	MX28_PAD_AUART0_CTS__DUART_RX,
-	MX28_PAD_AUART0_RTS__DUART_TX,
-#else
-	MX28_PAD_PWM0__DUART_RX,
-	MX28_PAD_PWM1__DUART_TX,
-#endif
-	MX28_PAD_AUART0_TX__DUART_RTS,
-	MX28_PAD_AUART0_RX__DUART_CTS,
-
-	/* UART2 */
-	MX28_PAD_AUART1_RX__AUART1_RX,
-	MX28_PAD_AUART1_TX__AUART1_TX,
-	MX28_PAD_AUART1_RTS__AUART1_RTS,
-	MX28_PAD_AUART1_CTS__AUART1_CTS,
-
-	/* CAN */
-	MX28_PAD_GPMI_RDY2__CAN0_TX,
-	MX28_PAD_GPMI_RDY3__CAN0_RX,
-
-	/* TSC2007 */
-	MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MUX_CONFIG_TSC,
-
-	/* MMC0 */
-	MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0,
-	MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0,
-	MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0,
-	MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0,
-	MX28_PAD_SSP0_DATA4__SSP0_D4 | MUX_CONFIG_SSP0,
-	MX28_PAD_SSP0_DATA5__SSP0_D5 | MUX_CONFIG_SSP0,
-	MX28_PAD_SSP0_DATA6__SSP0_D6 | MUX_CONFIG_SSP0,
-	MX28_PAD_SSP0_DATA7__SSP0_D7 | MUX_CONFIG_SSP0,
-	MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0,
-	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
-		(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
-	MX28_PAD_SSP0_SCK__SSP0_SCK |
-		(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
-	MX28_PAD_PWM3__GPIO_3_28 | MUX_CONFIG_SSP0 |
-		(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),	/* Power */
-	MX28_PAD_AUART2_CTS__GPIO_3_10,	/* WP */
-
-	/* GPMI NAND */
-	MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_D01__GPMI_D1 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_D02__GPMI_D2 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_D03__GPMI_D3 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_D04__GPMI_D4 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_D05__GPMI_D5 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_D06__GPMI_D6 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_D07__GPMI_D7 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_CE0N__GPMI_CE0N | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_RDY0__GPMI_READY0 | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_RDN__GPMI_RDN |
-		(MXS_PAD_1V8 | MXS_PAD_8MA | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_WRN__GPMI_WRN | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_ALE__GPMI_ALE | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_CLE__GPMI_CLE | MUX_CONFIG_GPMI,
-	MX28_PAD_GPMI_RESETN__GPMI_RESETN | MUX_CONFIG_GPMI,
-
-	/* FEC Ethernet */
-	MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET,
-	MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET,
-
-	MX28_PAD_ENET0_COL__ENET1_TX_EN | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_CRS__ENET1_RX_EN | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MUX_CONFIG_ENET,
-	MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MUX_CONFIG_ENET,
-#if !defined(CONFIG_DENX_M28_V11) && !defined(CONFIG_DENX_M28_V10)
-	MX28_PAD_AUART2_RTS__GPIO_3_11,	/* PHY reset */
-#endif
-
-	/* I2C */
-	MX28_PAD_I2C0_SCL__I2C0_SCL,
-	MX28_PAD_I2C0_SDA__I2C0_SDA,
-
-	/* EMI */
-	MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI,
-
-	MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
-	MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
-
-	/* SPI2 (for flash) */
-	MX28_PAD_SSP2_SCK__SSP2_SCK | MUX_CONFIG_SSP2,
-	MX28_PAD_SSP2_MOSI__SSP2_CMD | MUX_CONFIG_SSP2,
-	MX28_PAD_SSP2_MISO__SSP2_D0 | MUX_CONFIG_SSP2,
-	MX28_PAD_SSP2_SS0__SSP2_D3 |
-		(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
-};
-
-void board_init_ll(const uint32_t arg, const uint32_t *resptr)
-{
-	mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup));
-}