summaryrefslogtreecommitdiff
path: root/board/dhelectronics
diff options
context:
space:
mode:
authorLudwig Zenz <lzenz@dh-electronics.de>2018-07-05 09:23:48 +0200
committerStefano Babic <sbabic@denx.de>2018-07-23 11:02:14 +0200
commit0481bef035f5281d075549eb18cc6949dfbc42ff (patch)
treedcd566c894f08a56fa44825a60bec590add3e4cb /board/dhelectronics
parent659ca2dd08cc669a259c8205c8b4ac63b06911e6 (diff)
ARM: imx6: DHCOM i.MX6 PDK: ddr init for 32bit bus and 4GBit chips
Support 1GIB + 2GIB DDR3 with 64bit bus width and 512MIB + 1GIB with 32bit bus width Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.de>
Diffstat (limited to 'board/dhelectronics')
-rw-r--r--board/dhelectronics/dh_imx6/dh_imx6_spl.c191
1 files changed, 173 insertions, 18 deletions
diff --git a/board/dhelectronics/dh_imx6/dh_imx6_spl.c b/board/dhelectronics/dh_imx6/dh_imx6_spl.c
index eafb86d84f..04e9eab272 100644
--- a/board/dhelectronics/dh_imx6/dh_imx6_spl.c
+++ b/board/dhelectronics/dh_imx6/dh_imx6_spl.c
@@ -136,7 +136,31 @@ static const struct mx6sdl_iomux_grp_regs dhcom6sdl_grp_ioregs = {
.grp_b7ds = 0x00000030,
};
-static const struct mx6_mmdc_calibration dhcom_mmdc_calib = {
+static const struct mx6_mmdc_calibration dhcom_mmdc_calib_4x4g_1066 = {
+ .p0_mpwldectrl0 = 0x00150019,
+ .p0_mpwldectrl1 = 0x001C000B,
+ .p1_mpwldectrl0 = 0x00020018,
+ .p1_mpwldectrl1 = 0x0002000C,
+ .p0_mpdgctrl0 = 0x43140320,
+ .p0_mpdgctrl1 = 0x03080304,
+ .p1_mpdgctrl0 = 0x43180320,
+ .p1_mpdgctrl1 = 0x03100254,
+ .p0_mprddlctl = 0x4830383C,
+ .p1_mprddlctl = 0x3836323E,
+ .p0_mpwrdlctl = 0x3E444642,
+ .p1_mpwrdlctl = 0x42344442,
+};
+
+static const struct mx6_mmdc_calibration dhcom_mmdc_calib_2x4g_800 = {
+ .p0_mpwldectrl0 = 0x0040003C,
+ .p0_mpwldectrl1 = 0x0032003E,
+ .p0_mpdgctrl0 = 0x42350231,
+ .p0_mpdgctrl1 = 0x021A0218,
+ .p0_mprddlctl = 0x4B4B4E49,
+ .p0_mpwrdlctl = 0x3F3F3035,
+};
+
+static const struct mx6_mmdc_calibration dhcom_mmdc_calib_4x2g_1066 = {
.p0_mpwldectrl0 = 0x0011000E,
.p0_mpwldectrl1 = 0x000E001B,
.p1_mpwldectrl0 = 0x00190015,
@@ -151,23 +175,89 @@ static const struct mx6_mmdc_calibration dhcom_mmdc_calib = {
.p1_mpwrdlctl = 0x473E4A3B,
};
-static const struct mx6_ddr3_cfg dhcom_mem_ddr = {
+static const struct mx6_mmdc_calibration dhcom_mmdc_calib_4x2g_800 = {
+ .p0_mpwldectrl0 = 0x003A003A,
+ .p0_mpwldectrl1 = 0x0030002F,
+ .p1_mpwldectrl0 = 0x002F0038,
+ .p1_mpwldectrl1 = 0x00270039,
+ .p0_mpdgctrl0 = 0x420F020F,
+ .p0_mpdgctrl1 = 0x01760175,
+ .p1_mpdgctrl0 = 0x41640171,
+ .p1_mpdgctrl1 = 0x015E0160,
+ .p0_mprddlctl = 0x45464B4A,
+ .p1_mprddlctl = 0x49484A46,
+ .p0_mpwrdlctl = 0x40402E32,
+ .p1_mpwrdlctl = 0x3A3A3231,
+};
+
+static const struct mx6_mmdc_calibration dhcom_mmdc_calib_2x2g_800 = {
+ .p0_mpwldectrl0 = 0x0040003C,
+ .p0_mpwldectrl1 = 0x0032003E,
+ .p0_mpdgctrl0 = 0x42350231,
+ .p0_mpdgctrl1 = 0x021A0218,
+ .p0_mprddlctl = 0x4B4B4E49,
+ .p0_mpwrdlctl = 0x3F3F3035,
+};
+
+/*
+ * 2 Gbit DDR3 memory
+ * - NANYA #NT5CC128M16IP-DII
+ * - NANYA #NT5CB128M16FP-DII
+ */
+static const struct mx6_ddr3_cfg dhcom_mem_ddr_2g = {
.mem_speed = 1600,
.density = 2,
- .width = 64,
+ .width = 16,
.banks = 8,
.rowaddr = 14,
.coladdr = 10,
.pagesz = 2,
- .trcd = 1312,
+ .trcd = 1375,
.trcmin = 5863,
.trasmin = 3750,
};
-static const struct mx6_ddr_sysinfo dhcom_ddr_info = {
+/*
+ * 4 Gbit DDR3 memory
+ * - Intelligent Memory #IM4G16D3EABG-125I
+ */
+static const struct mx6_ddr3_cfg dhcom_mem_ddr_4g = {
+ .mem_speed = 1600,
+ .density = 4,
+ .width = 16,
+ .banks = 8,
+ .rowaddr = 15,
+ .coladdr = 10,
+ .pagesz = 2,
+ .trcd = 1375,
+ .trcmin = 4875,
+ .trasmin = 3500,
+};
+
+/* DDR3 64bit */
+static const struct mx6_ddr_sysinfo dhcom_ddr_64bit = {
/* width of data bus:0=16,1=32,2=64 */
.dsize = 2,
- .cs_density = 16,
+ .cs_density = 32,
+ .ncs = 1, /* single chip select */
+ .cs1_mirror = 1,
+ .rtt_wr = 1, /* DDR3_RTT_60_OHM, RTT_Wr = RZQ/4 */
+ .rtt_nom = 1, /* DDR3_RTT_60_OHM, RTT_Nom = RZQ/4 */
+ .walat = 1, /* Write additional latency */
+ .ralat = 5, /* Read additional latency */
+ .mif3_mode = 3, /* Command prediction working mode */
+ .bi_on = 1, /* Bank interleaving enabled */
+ .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
+ .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
+ .refsel = 1, /* Refresh cycles at 32KHz */
+ .refr = 3, /* 4 refresh commands per refresh cycle */
+};
+
+/* DDR3 32bit */
+static const struct mx6_ddr_sysinfo dhcom_ddr_32bit = {
+ /* width of data bus:0=16,1=32,2=64 */
+ .dsize = 1,
+ .cs_density = 32,
.ncs = 1, /* single chip select */
.cs1_mirror = 1,
.rtt_wr = 1, /* DDR3_RTT_60_OHM, RTT_Wr = RZQ/4 */
@@ -392,6 +482,81 @@ static void setup_iomux_usb(void)
SETUP_IOMUX_PADS(usb_pads);
}
+
+/* DRAM */
+static void dhcom_spl_dram_init(void)
+{
+ enum dhcom_ddr3_code ddr3_code = dhcom_get_ddr3_code();
+
+ if (is_mx6dq()) {
+ mx6dq_dram_iocfg(64, &dhcom6dq_ddr_ioregs,
+ &dhcom6dq_grp_ioregs);
+ switch (ddr3_code) {
+ default:
+ printf("imx6qd: unsupported ddr3 code %d\n", ddr3_code);
+ printf(" choosing 1024 MB\n");
+ /* fall through */
+ case DH_DDR3_SIZE_1GIB:
+ mx6_dram_cfg(&dhcom_ddr_64bit,
+ &dhcom_mmdc_calib_4x2g_1066,
+ &dhcom_mem_ddr_2g);
+ break;
+ case DH_DDR3_SIZE_2GIB:
+ mx6_dram_cfg(&dhcom_ddr_64bit,
+ &dhcom_mmdc_calib_4x4g_1066,
+ &dhcom_mem_ddr_4g);
+ break;
+ }
+
+ /* Perform DDR DRAM calibration */
+ udelay(100);
+ mmdc_do_dqs_calibration(&dhcom_ddr_64bit);
+
+ } else if (is_cpu_type(MXC_CPU_MX6DL)) {
+ mx6sdl_dram_iocfg(64, &dhcom6sdl_ddr_ioregs,
+ &dhcom6sdl_grp_ioregs);
+ switch (ddr3_code) {
+ default:
+ printf("imx6dl: unsupported ddr3 code %d\n", ddr3_code);
+ printf(" choosing 1024 MB\n");
+ /* fall through */
+ case DH_DDR3_SIZE_1GIB:
+ mx6_dram_cfg(&dhcom_ddr_64bit,
+ &dhcom_mmdc_calib_4x2g_800,
+ &dhcom_mem_ddr_2g);
+ break;
+ }
+
+ /* Perform DDR DRAM calibration */
+ udelay(100);
+ mmdc_do_dqs_calibration(&dhcom_ddr_64bit);
+
+ } else if (is_cpu_type(MXC_CPU_MX6SOLO)) {
+ mx6sdl_dram_iocfg(32, &dhcom6sdl_ddr_ioregs,
+ &dhcom6sdl_grp_ioregs);
+ switch (ddr3_code) {
+ default:
+ printf("imx6s: unsupported ddr3 code %d\n", ddr3_code);
+ printf(" choosing 512 MB\n");
+ /* fall through */
+ case DH_DDR3_SIZE_512MIB:
+ mx6_dram_cfg(&dhcom_ddr_32bit,
+ &dhcom_mmdc_calib_2x2g_800,
+ &dhcom_mem_ddr_2g);
+ break;
+ case DH_DDR3_SIZE_1GIB:
+ mx6_dram_cfg(&dhcom_ddr_32bit,
+ &dhcom_mmdc_calib_2x4g_800,
+ &dhcom_mem_ddr_4g);
+ break;
+ }
+
+ /* Perform DDR DRAM calibration */
+ udelay(100);
+ mmdc_do_dqs_calibration(&dhcom_ddr_32bit);
+ }
+}
+
void board_init_f(ulong dummy)
{
/* setup AIPS and disable watchdog */
@@ -415,18 +580,8 @@ void board_init_f(ulong dummy)
/* UART clocks enabled and gd valid - init serial console */
preloader_console_init();
- /* Start the DDR DRAM */
- if (is_mx6dq())
- mx6dq_dram_iocfg(dhcom_mem_ddr.width, &dhcom6dq_ddr_ioregs,
- &dhcom6dq_grp_ioregs);
- else
- mx6sdl_dram_iocfg(dhcom_mem_ddr.width, &dhcom6sdl_ddr_ioregs,
- &dhcom6sdl_grp_ioregs);
- mx6_dram_cfg(&dhcom_ddr_info, &dhcom_mmdc_calib, &dhcom_mem_ddr);
-
- /* Perform DDR DRAM calibration */
- udelay(100);
- mmdc_do_dqs_calibration(&dhcom_ddr_info);
+ /* DDR3 initialization */
+ dhcom_spl_dram_init();
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);