digsy_mtc: move board into vendor dir and add vendor logo

Signed-off-by: Anatolij Gustschin <agust@denx.de>

1 files changed, 0 insertions, 500 deletions

diff --git a/board/digsy_mtc/digsy_mtc.c b/board/digsy_mtc/digsy_mtc.c
deleted file mode 100644
index 784ba2ac04..0000000000
--- a/board/digsy_mtc/digsy_mtc.c
+++ /dev/null
@@ -1,500 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * (C) Copyright 2005-2009
- * Modified for InterControl digsyMTC MPC5200 board by
- * Frank Bodammer, GCD Hard- & Software GmbH,
- *                 frank.bodammer@gcd-solutions.de
- *
- * (C) Copyright 2009
- * Grzegorz Bernacki, Semihalf, gjb@semihalf.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <net.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include "eeprom.h"
-#if defined(CONFIG_DIGSY_REV5)
-#include "is45s16800a2.h"
-#include <mtd/cfi_flash.h>
-#include <flash.h>
-#else
-#include "is42s16800a-7t.h"
-#endif
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <i2c.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern int usb_cpu_init(void);
-
-#if defined(CONFIG_DIGSY_REV5)
-/*
- * The M29W128GH needs a specail reset command function,
- * details see the doc/README.cfi file
- */
-void flash_cmd_reset(flash_info_t *info)
-{
-	flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
-}
-#endif
-
-#ifndef CONFIG_SYS_RAMBOOT
-static void sdram_start(int hi_addr)
-{
-	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-	long control = SDRAM_CONTROL | hi_addr_bit;
-
-	/* unlock mode register */
-	out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000000);
-
-	/* precharge all banks */
-	out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000002);
-
-	/* auto refresh */
-	out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000004);
-
-	/* set mode register */
-	out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_MODE);
-
-	/* normal operation */
-	out_be32((void *)MPC5XXX_SDRAM_CTRL, control);
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if
- *            CONFIG_SYS_SDRAM_BASE is something else than 0x00000000.
- */
-
-phys_size_t initdram(int board_type)
-{
-	ulong dramsize = 0;
-	ulong dramsize2 = 0;
-	uint svr, pvr;
-#ifndef CONFIG_SYS_RAMBOOT
-	ulong test1, test2;
-
-	/* setup SDRAM chip selects */
-	out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0x0000001C); /* 512MB at 0x0 */
-	out_be32((void *)MPC5XXX_SDRAM_CS1CFG, 0x80000000); /* disabled */
-
-	/* setup config registers */
-	out_be32((void *)MPC5XXX_SDRAM_CONFIG1, SDRAM_CONFIG1);
-	out_be32((void *)MPC5XXX_SDRAM_CONFIG2, SDRAM_CONFIG2);
-
-	/* find RAM size using SDRAM CS0 only */
-	sdram_start(0);
-	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x08000000);
-	sdram_start(1);
-	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x08000000);
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize = test1;
-	} else {
-		dramsize = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize < (1 << 20))
-		dramsize = 0;
-
-	/* set SDRAM CS0 size according to the amount of RAM found */
-	if (dramsize > 0) {
-		out_be32((void *)MPC5XXX_SDRAM_CS0CFG,
-			(0x13 + __builtin_ffs(dramsize >> 20) - 1));
-	} else {
-		out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0); /* disabled */
-	}
-
-	/* let SDRAM CS1 start right after CS0 */
-	out_be32((void *)MPC5XXX_SDRAM_CS1CFG, dramsize + 0x0000001C);
-
-	/* find RAM size using SDRAM CS1 only */
-	test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize),
-			0x08000000);
-		dramsize2 = test1;
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize2 < (1 << 20))
-		dramsize2 = 0;
-
-	/* set SDRAM CS1 size according to the amount of RAM found */
-	if (dramsize2 > 0) {
-		out_be32((void *)MPC5XXX_SDRAM_CS1CFG, (dramsize |
-			(0x13 + __builtin_ffs(dramsize2 >> 20) - 1)));
-	} else {
-		out_be32((void *)MPC5XXX_SDRAM_CS1CFG, dramsize); /* disabled */
-	}
-
-#else /* CONFIG_SYS_RAMBOOT */
-
-	/* retrieve size of memory connected to SDRAM CS0 */
-	dramsize = in_be32((void *)MPC5XXX_SDRAM_CS0CFG) & 0xFF;
-	if (dramsize >= 0x13)
-		dramsize = (1 << (dramsize - 0x13)) << 20;
-	else
-		dramsize = 0;
-
-	/* retrieve size of memory connected to SDRAM CS1 */
-	dramsize2 = in_be32((void *)MPC5XXX_SDRAM_CS1CFG) & 0xFF;
-	if (dramsize2 >= 0x13)
-		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
-	else
-		dramsize2 = 0;
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
-	/*
-	 * On MPC5200B we need to set the special configuration delay in the
-	 * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
-	 * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
-	 *
-	 * "The SDelay should be written to a value of 0x00000004. It is
-	 * required to account for changes caused by normal wafer processing
-	 * parameters."
-	 */
-	svr = get_svr();
-	pvr = get_pvr();
-	if ((SVR_MJREV(svr) >= 2) &&
-	    (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4))
-		out_be32((void *)MPC5XXX_SDRAM_SDELAY, 0x04);
-
-	return dramsize + dramsize2;
-}
-
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	puts ("Board: InterControl digsyMTC");
-#if defined(CONFIG_DIGSY_REV5)
-	puts (" rev5");
-#endif
-	if (i > 0) {
-		puts(", ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return 0;
-}
-
-#if defined(CONFIG_VIDEO)
-
-#define GPIO_USB1_0		0x00010000	/* Power-On pin */
-#define GPIO_USB1_9		0x08		/* PX_~EN pin */
-
-#define GPIO_EE_DO		0x10		/* PSC6_0 (DO) pin */
-#define GPIO_EE_CTS		0x20		/* PSC6_1 (CTS) pin */
-#define GPIO_EE_DI		0x10000000	/* PSC6_2 (DI) pin */
-#define GPIO_EE_CLK		0x20000000	/* PSC6_3 (CLK) pin */
-
-#define GPT_GPIO_ON		0x00000034	/* GPT as simple GPIO, high */
-
-/* ExBo I2C Addresses */
-#define EXBO_EE_I2C_ADDRESS	0x56
-
-static void exbo_hw_init(void)
-{
-	struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)MPC5XXX_GPT;
-	struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
-	struct mpc5xxx_wu_gpio *wu_gpio =
-				(struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO;
-	unsigned char val;
-
-	/* 1st, check if extension board is present */
-	if (i2c_read(EXBO_EE_I2C_ADDRESS, 0, 1, &val, 1))
-		return;
-
-	/* configure IrDA pins (PSC6 port) as gpios */
-	gpio->port_config &= 0xFF8FFFFF;
-
-	/* Init for USB1_0, EE_CLK and EE_DI - Low */
-	setbits_be32(&gpio->simple_ddr,
-			GPIO_USB1_0 | GPIO_EE_CLK | GPIO_EE_DI);
-	clrbits_be32(&gpio->simple_ode,
-			GPIO_USB1_0 | GPIO_EE_CLK | GPIO_EE_DI);
-	clrbits_be32(&gpio->simple_dvo,
-			GPIO_USB1_0 | GPIO_EE_CLK | GPIO_EE_DI);
-	setbits_be32(&gpio->simple_gpioe,
-			GPIO_USB1_0 | GPIO_EE_CLK | GPIO_EE_DI);
-
-	/* Init for EE_DO, EE_CTS - Input */
-	clrbits_8(&wu_gpio->ddr, GPIO_EE_DO | GPIO_EE_CTS);
-	setbits_8(&wu_gpio->enable, GPIO_EE_DO | GPIO_EE_CTS);
-
-	/* Init for PX_~EN (USB1_9) - High */
-	clrbits_8(&gpio->sint_ode, GPIO_USB1_9);
-	setbits_8(&gpio->sint_ddr, GPIO_USB1_9);
-	clrbits_8(&gpio->sint_inten, GPIO_USB1_9);
-	setbits_8(&gpio->sint_dvo, GPIO_USB1_9);
-	setbits_8(&gpio->sint_gpioe, GPIO_USB1_9);
-
-	/* Init for ~OE Switch (GPIO3) - Timer_0 GPIO High */
-	out_be32(&gpt[0].emsr, GPT_GPIO_ON);
-	/* Init for S Switch (GPIO4) - Timer_1 GPIO High */
-	out_be32(&gpt[1].emsr, GPT_GPIO_ON);
-
-	/* Power-On camera supply */
-	setbits_be32(&gpio->simple_dvo, GPIO_USB1_0);
-}
-#else
-static inline void exbo_hw_init(void) {}
-#endif /* CONFIG_VIDEO */
-
-int board_early_init_r(void)
-{
-#ifdef CONFIG_MPC52XX_SPI
-	struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt*)MPC5XXX_GPT;
-#endif
-	/*
-	 * Now, when we are in RAM, enable flash write access for detection
-	 * process.  Note that CS_BOOT cannot be cleared when executing in
-	 * flash.
-	 */
-	/* disable CS_BOOT */
-	clrbits_be32((void *)MPC5XXX_ADDECR, (1 << 25));
-	/* enable CS1 */
-	setbits_be32((void *)MPC5XXX_ADDECR, (1 << 17));
-	/* enable CS0 */
-	setbits_be32((void *)MPC5XXX_ADDECR, (1 << 16));
-
-	exbo_hw_init();
-
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
-	/* Low level USB init, required for proper kernel operation */
-	usb_cpu_init();
-#endif
-#ifdef CONFIG_MPC52XX_SPI
-	/* GPT 6 Output Enable */
-	out_be32(&gpt[6].emsr, 0x00000034);
-	/* GPT 7 Output Enable */
-	out_be32(&gpt[7].emsr, 0x00000034);
-#endif
-
-	return (0);
-}
-
-void board_get_enetaddr (uchar * enet)
-{
-	ushort read = 0;
-	ushort addr_of_eth_addr = 0;
-	ushort len_sys = 0;
-	ushort len_sys_cfg = 0;
-
-	/* check identification word */
-	eeprom_read(EEPROM_ADDR, EEPROM_ADDR_IDENT, (uchar *)&read, 2);
-	if (read != EEPROM_IDENT)
-		return;
-
-	/* calculate offset of config area */
-	eeprom_read(EEPROM_ADDR, EEPROM_ADDR_LEN_SYS, (uchar *)&len_sys, 2);
-	eeprom_read(EEPROM_ADDR, EEPROM_ADDR_LEN_SYSCFG,
-		(uchar *)&len_sys_cfg, 2);
-	addr_of_eth_addr = (len_sys + len_sys_cfg + EEPROM_ADDR_ETHADDR) << 1;
-	if (addr_of_eth_addr >= EEPROM_LEN)
-		return;
-
-	eeprom_read(EEPROM_ADDR, addr_of_eth_addr, enet, 6);
-}
-
-int misc_init_r(void)
-{
-	uchar enetaddr[6];
-
-	if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
-		board_get_enetaddr(enetaddr);
-		eth_setenv_enetaddr("ethaddr", enetaddr);
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
-	pci_mpc5xxx_init(&hose);
-}
-#endif
-
-#ifdef CONFIG_CMD_IDE
-
-#ifdef CONFIG_IDE_RESET
-
-void init_ide_reset(void)
-{
-	debug ("init_ide_reset\n");
-
-	/* set gpio output value to 1 */
-	setbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, (1 << 25));
-	/* open drain output */
-	setbits_be32((void *)MPC5XXX_WU_GPIO_ODE, (1 << 25));
-	/* direction output */
-	setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, (1 << 25));
-	/* enable gpio */
-	setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25));
-
-}
-
-void ide_set_reset(int idereset)
-{
-	debug ("ide_reset(%d)\n", idereset);
-
-	/* set gpio output value to 0 */
-	clrbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, (1 << 25));
-	/* open drain output */
-	setbits_be32((void *)MPC5XXX_WU_GPIO_ODE, (1 << 25));
-	/* direction output */
-	setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, (1 << 25));
-	/* enable gpio */
-	setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25));
-
-	udelay(10000);
-
-	/* set gpio output value to 1 */
-	setbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, (1 << 25));
-	/* open drain output */
-	setbits_be32((void *)MPC5XXX_WU_GPIO_ODE, (1 << 25));
-	/* direction output */
-	setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, (1 << 25));
-	/* enable gpio */
-	setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25));
-}
-#endif /* CONFIG_IDE_RESET */
-#endif /* CONFIG_CMD_IDE */
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-static void ft_delete_node(void *fdt, const char *compat)
-{
-	int off = -1;
-	int ret;
-
-	off = fdt_node_offset_by_compatible(fdt, -1, compat);
-	if (off < 0) {
-		printf("Could not find %s node.\n", compat);
-		return;
-	}
-
-	ret = fdt_del_node(fdt, off);
-	if (ret < 0)
-		printf("Could not delete %s node.\n", compat);
-}
-#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE)
-static void ft_adapt_flash_base(void *blob)
-{
-	flash_info_t	*dev = &flash_info[0];
-	int off;
-	struct fdt_property *prop;
-	int len;
-	u32 *reg, *reg2;
-
-	off = fdt_node_offset_by_compatible(blob, -1, "fsl,mpc5200b-lpb");
-	if (off < 0) {
-		printf("Could not find fsl,mpc5200b-lpb node.\n");
-		return;
-	}
-
-	/* found compatible property */
-	prop = fdt_get_property_w(blob, off, "ranges", &len);
-	if (prop) {
-		reg = reg2 = (u32 *)&prop->data[0];
-
-		reg[2] = dev->start[0];
-		reg[3] = dev->size;
-		fdt_setprop(blob, off, "ranges", reg2, len);
-	} else
-		printf("Could not find ranges\n");
-}
-
-extern ulong flash_get_size (phys_addr_t base, int banknum);
-
-/* Update the Flash Baseaddr settings */
-int update_flash_size (int flash_size)
-{
-	volatile struct mpc5xxx_mmap_ctl *mm =
-		(struct mpc5xxx_mmap_ctl *) CONFIG_SYS_MBAR;
-	flash_info_t	*dev;
-	int	i;
-	int size = 0;
-	unsigned long base = 0x0;
-	u32 *cs_reg = (u32 *)&mm->cs0_start;
-
-	for (i = 0; i < 2; i++) {
-		dev = &flash_info[i];
-
-		if (dev->size) {
-			/* calculate new base addr for this chipselect */
-			base -= dev->size;
-			out_be32(cs_reg, START_REG(base));
-			cs_reg++;
-			out_be32(cs_reg, STOP_REG(base, dev->size));
-			cs_reg++;
-			/* recalculate the sectoraddr in the cfi driver */
-			size += flash_get_size(base, i);
-		}
-	}
-	flash_protect_default();
-	gd->bd->bi_flashstart = base;
-	return 0;
-}
-#endif /* defined(CONFIG_SYS_UPDATE_FLASH_SIZE) */
-
-void ft_board_setup(void *blob, bd_t *bd)
-{
-	int phy_addr = CONFIG_PHY_ADDR;
-	char eth_path[] = "/soc5200@f0000000/mdio@3000/ethernet-phy@0";
-
-	ft_cpu_setup(blob, bd);
-	/*
-	 * There are 2 RTC nodes in the DTS, so remove
-	 * the unneeded node here.
-	 */
-#if defined(CONFIG_DIGSY_REV5)
-	ft_delete_node(blob, "dallas,ds1339");
-#else
-	ft_delete_node(blob, "mc,rv3029c2");
-#endif
-#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE)
-#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
-	/* Update reg property in all nor flash nodes too */
-	fdt_fixup_nor_flash_size(blob);
-#endif
-	ft_adapt_flash_base(blob);
-#endif
-	/* fix up the phy address */
-	do_fixup_by_path(blob, eth_path, "reg", &phy_addr, sizeof(int), 0);
-}
-#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */