rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

6 files changed, 48 insertions, 48 deletions

diff --git a/board/eltec/elppc/asm_init.S b/board/eltec/elppc/asm_init.S
index 1b8d399ed3..8cbe9d88e5 100644
--- a/board/eltec/elppc/asm_init.S
+++ b/board/eltec/elppc/asm_init.S
@@ -272,15 +272,15 @@ memStartWait:
  * set LEDs first time
  */
     li      r3, 0x1
-    lis     r30, CFG_USR_LED_BASE@h
+    lis     r30, CONFIG_SYS_USR_LED_BASE@h
     stb     r3, 2(r30)
     sync
 
 /*
  * init COM1 for polled output
  */
-    lis     r8, CFG_NS16550_COM1@h  /* COM1 base address*/
-    ori     r8, r8, CFG_NS16550_COM1@l
+    lis     r8, CONFIG_SYS_NS16550_COM1@h  /* COM1 base address*/
+    ori     r8, r8, CONFIG_SYS_NS16550_COM1@l
     li      r9, 0x00
     stb     r9, 1(r8)           /* int disabled */
     eieio
@@ -290,10 +290,10 @@ memStartWait:
     li      r9, 0x80
     stb     r9, 3(r8)           /* link ctrl */
     eieio
-    li      r9, (CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE)
+    li      r9, (CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE)
     stb     r9, 0(r8)           /* baud rate (LSB)*/
     eieio
-    li      r9, ((CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE) >> 8)
+    li      r9, ((CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE) >> 8)
     stb     r9, 1(r8)           /* baud rate (MSB) */
     eieio
     li      r9, 0x07
@@ -589,7 +589,7 @@ memStartWait_1:
  * set LEDs end
  */
     li      r3, 0xf
-    lis     r30, CFG_USR_LED_BASE@h
+    lis     r30, CONFIG_SYS_USR_LED_BASE@h
     stb     r3, 2(r30)
     sync
 
@@ -602,8 +602,8 @@ memStartWait_1:
  */
 
 Printf:
-    lis     r10, CFG_NS16550_COM1@h /* COM1 base address*/
-    ori     r10, r10, CFG_NS16550_COM1@l
+    lis     r10, CONFIG_SYS_NS16550_COM1@h /* COM1 base address*/
+    ori     r10, r10, CONFIG_SYS_NS16550_COM1@l
 WaitChr:
     lbz     r0, 5(r10)          /* read link status */
     eieio
@@ -622,8 +622,8 @@ WaitChr:
  * print a char to COM1 in polling mode (r10=COM1 port, r3=char)
  */
 OutChr:
-    lis     r10, CFG_NS16550_COM1@h /* COM1 base address*/
-    ori     r10, r10, CFG_NS16550_COM1@l
+    lis     r10, CONFIG_SYS_NS16550_COM1@h /* COM1 base address*/
+    ori     r10, r10, CONFIG_SYS_NS16550_COM1@l
 OutChr1:
     lbz     r0, 5(r10)          /* read link status */
     eieio
@@ -645,8 +645,8 @@ OutHex4:
 OutHex:
     li      r9, 28              /* shift reg for 8 digits */
 OHstart:
-    lis     r10, CFG_NS16550_COM1@h /* COM1 base address*/
-    ori     r10, r10, CFG_NS16550_COM1@l
+    lis     r10, CONFIG_SYS_NS16550_COM1@h /* COM1 base address*/
+    ori     r10, r10, CONFIG_SYS_NS16550_COM1@l
 OutDig:
     lbz     r0, 0(r29)          /* slow down dummy read */
     lbz     r0, 5(r10)          /* read link status */
@@ -685,8 +685,8 @@ OutDec:
     divwu   r0, r3, r6          /* r0 = r3 / 10, r7 = r3 mod 10 */
     mullw   r10, r0, r6
     subf    r7, r10, r3
-    lis     r10, CFG_NS16550_COM1@h /* COM1 base address*/
-    ori     r10, r10, CFG_NS16550_COM1@l
+    lis     r10, CONFIG_SYS_NS16550_COM1@h /* COM1 base address*/
+    ori     r10, r10, CONFIG_SYS_NS16550_COM1@l
     or.     r7, r7, r7
     bne     noblank1
     li      r3, 0x20
diff --git a/board/eltec/elppc/elppc.c b/board/eltec/elppc/elppc.c
index d3ac2784ac..e73c712cbb 100644
--- a/board/eltec/elppc/elppc.c
+++ b/board/eltec/elppc/elppc.c
@@ -68,16 +68,16 @@ long int dram_size (int board_type)
 
 	register unsigned long i, msar1, mear1, memSize;
 
-#if defined(CFG_MEMTEST)
+#if defined(CONFIG_SYS_MEMTEST)
 	register unsigned long reg;
 
 	printf ("Testing DRAM\n");
 
 	/* write each mem addr with it's address */
-	for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4)
+	for (reg = CONFIG_SYS_MEMTEST_START; reg < CONFIG_SYS_MEMTEST_END; reg += 4)
 		*reg = reg;
 
-	for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4) {
+	for (reg = CONFIG_SYS_MEMTEST_START; reg < CONFIG_SYS_MEMTEST_END; reg += 4) {
 		if (*reg != reg)
 			return -1;
 	}
diff --git a/board/eltec/elppc/flash.c b/board/eltec/elppc/flash.c
index 442dd00519..21ae09892d 100644
--- a/board/eltec/elppc/flash.c
+++ b/board/eltec/elppc/flash.c
@@ -34,7 +34,7 @@
 #include <asm/processor.h>
 #include <asm/pci_io.h>
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
 ulong flash_get_size (vu_long *addr, flash_info_t *info);
 static int write_word (flash_info_t *info, ulong dest, ulong data);
@@ -55,7 +55,7 @@ unsigned long flash_init (void)
     int i;
 
     /* Init: no FLASHes known */
-    for (i=0; i<CFG_MAX_FLASH_BANKS; ++i)
+    for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i)
     {
 	flash_info[i].flash_id = FLASH_UNKNOWN;
     }
@@ -96,8 +96,8 @@ unsigned long flash_init (void)
     if (size2 == 4*1024*1024)
     {
 	(void)flash_protect(FLAG_PROTECT_SET,
-		CFG_FLASH_BASE,
-		CFG_FLASH_BASE+monitor_flash_len-1,
+		CONFIG_SYS_FLASH_BASE,
+		CONFIG_SYS_FLASH_BASE+monitor_flash_len-1,
 		&flash_info[1]);
     }
 
@@ -370,7 +370,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
     last  = start;
     addr = (FLASH_WORD_SIZE *)(info->start[l_sect]);
     while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
-	if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 	    printf ("Timeout\n");
 	    return 1;
 	}
@@ -500,7 +500,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	    start = get_timer (0);
 	    while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) !=
 		   (data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
-	      if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	      if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 		return (1);
 	      }
 	    }
diff --git a/board/eltec/elppc/misc.c b/board/eltec/elppc/misc.c
index 5e3a81c6e1..cbaf10b7e6 100644
--- a/board/eltec/elppc/misc.c
+++ b/board/eltec/elppc/misc.c
@@ -29,7 +29,7 @@
 #include "srom.h"
 
 /* imports  */
-extern char console_buffer[CFG_CBSIZE];
+extern char console_buffer[CONFIG_SYS_CBSIZE];
 extern int l2_cache_enable (int l2control);
 extern int eepro100_write_eeprom (struct eth_device *dev, int location,
 				  int addr_len, unsigned short data);
@@ -95,7 +95,7 @@ int misc_init_r (void)
 			  SECOND_DEVICE, FIRST_BLOCK);
 
 	/* read out current nvram shadow image */
-	nvram_read (buf, CFG_NV_SROM_COPY_ADDR, CFG_SROM_SIZE);
+	nvram_read (buf, CONFIG_SYS_NV_SROM_COPY_ADDR, CONFIG_SYS_SROM_SIZE);
 
 	if (strcmp (eerev.magic, "ELTEC") != 0) {
 		/* srom is not initialized -> create a default revision info */
@@ -124,8 +124,8 @@ int misc_init_r (void)
 	}
 
 	if ((copyNv == 0)
-	    && (el_srom_checksum ((u_char *) & eerev, CFG_SROM_SIZE) !=
-		el_srom_checksum ((u_char *) buf, CFG_SROM_SIZE))) {
+	    && (el_srom_checksum ((u_char *) & eerev, CONFIG_SYS_SROM_SIZE) !=
+		el_srom_checksum ((u_char *) buf, CONFIG_SYS_SROM_SIZE))) {
 		printf ("Invalid revision info copy in nvram !\n");
 		printf ("Press key:\n  <c> to copy current revision info to nvram.\n");
 		printf ("  <r> to reenter revision info.\n");
@@ -232,16 +232,16 @@ int misc_init_r (void)
 			printf ("OK\n\n");
 
 		/* write new values as shadow image to nvram */
-		nvram_write (CFG_NV_SROM_COPY_ADDR, (void *) &eerev,
-			     CFG_SROM_SIZE);
+		nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *) &eerev,
+			     CONFIG_SYS_SROM_SIZE);
 
 	}
 
 	/*if (initSrom) */
 	/* copy current values as shadow image to nvram */
 	if (initSrom == 0 && copyNv == 1)
-		nvram_write (CFG_NV_SROM_COPY_ADDR, (void *) &eerev,
-			     CFG_SROM_SIZE);
+		nvram_write (CONFIG_SYS_NV_SROM_COPY_ADDR, (void *) &eerev,
+			     CONFIG_SYS_SROM_SIZE);
 
 	/* update environment */
 	sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x",
diff --git a/board/eltec/elppc/pci.c b/board/eltec/elppc/pci.c
index 5b115ea617..bf133b77de 100644
--- a/board/eltec/elppc/pci.c
+++ b/board/eltec/elppc/pci.c
@@ -42,37 +42,37 @@ void pci_init_board(void)
     hose->last_busno = 0xff;
 
     pci_set_region(hose->regions + 0,
-	CFG_PCI_MEMORY_BUS,
-	CFG_PCI_MEMORY_PHYS,
-	CFG_PCI_MEMORY_SIZE,
+	CONFIG_SYS_PCI_MEMORY_BUS,
+	CONFIG_SYS_PCI_MEMORY_PHYS,
+	CONFIG_SYS_PCI_MEMORY_SIZE,
 	PCI_REGION_MEM | PCI_REGION_MEMORY);
 
     /* PCI memory space */
     pci_set_region(hose->regions + 1,
-	CFG_PCI_MEM_BUS,
-	CFG_PCI_MEM_PHYS,
-	CFG_PCI_MEM_SIZE,
+	CONFIG_SYS_PCI_MEM_BUS,
+	CONFIG_SYS_PCI_MEM_PHYS,
+	CONFIG_SYS_PCI_MEM_SIZE,
 	PCI_REGION_MEM);
 
     /* ISA/PCI memory space */
     pci_set_region(hose->regions + 2,
-	CFG_ISA_MEM_BUS,
-	CFG_ISA_MEM_PHYS,
-	CFG_ISA_MEM_SIZE,
+	CONFIG_SYS_ISA_MEM_BUS,
+	CONFIG_SYS_ISA_MEM_PHYS,
+	CONFIG_SYS_ISA_MEM_SIZE,
 	PCI_REGION_MEM);
 
     /* PCI I/O space */
     pci_set_region(hose->regions + 3,
-	CFG_PCI_IO_BUS,
-	CFG_PCI_IO_PHYS,
-	CFG_PCI_IO_SIZE,
+	CONFIG_SYS_PCI_IO_BUS,
+	CONFIG_SYS_PCI_IO_PHYS,
+	CONFIG_SYS_PCI_IO_SIZE,
 	PCI_REGION_IO);
 
     /* ISA/PCI I/O space */
     pci_set_region(hose->regions + 4,
-	CFG_ISA_IO_BUS,
-	CFG_ISA_IO_PHYS,
-	CFG_ISA_IO_SIZE,
+	CONFIG_SYS_ISA_IO_BUS,
+	CONFIG_SYS_ISA_IO_PHYS,
+	CONFIG_SYS_ISA_IO_SIZE,
 	PCI_REGION_IO);
 
     hose->region_count = 5;
diff --git a/board/eltec/elppc/srom.h b/board/eltec/elppc/srom.h
index c18ab91645..504b742a68 100644
--- a/board/eltec/elppc/srom.h
+++ b/board/eltec/elppc/srom.h
@@ -40,8 +40,8 @@
 #define SROM_SHORT(pX)          (*(u8 *)(pX) | *((u8 *)(pX)+1) << 8)
 
 /* bab7xx ELTEC srom */
-#define I2C_BUS_DAT             (CFG_ISA_IO + 0x220)
-#define I2C_BUS_DIR             (CFG_ISA_IO + 0x221)
+#define I2C_BUS_DAT             (CONFIG_SYS_ISA_IO + 0x220)
+#define I2C_BUS_DIR             (CONFIG_SYS_ISA_IO + 0x221)
 
 /* srom at mpc107 */
 #define MPC107_I2CADDR          (mpc107_eumb_addr + 0x3000)     /* address      */