ppc/arm: zap EMK boards

The following bard configurations have been without active maintenance
for a long time, and the board maintainer agrees to have them removed:

MPC5200:	TOP5200, MINI5200, EVAL5200
MPC860:		TOP860
at91sam9xeXXX:	top9000eval_xe, top9000su_xe

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
[trini: Add missing Kconfig removals]
Signed-off-by: Tom Rini <trini@ti.com>

3 files changed, 0 insertions, 651 deletions

diff --git a/board/emk/common/am79c874.c b/board/emk/common/am79c874.c
deleted file mode 100644
index b3840a2222..0000000000
--- a/board/emk/common/am79c874.c
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * (C) Copyright 2003
- * Reinhard Meyer, EMK Elektronik GmbH, r.meyer@emk-elektronik.de
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-
-/*****************************************************************************
- * check fiber optic link present, and then copper link present. do auto switch
- * between both
- *****************************************************************************/
diff --git a/board/emk/common/flash.c b/board/emk/common/flash.c
deleted file mode 100644
index ae5777c796..0000000000
--- a/board/emk/common/flash.c
+++ /dev/null
@@ -1,575 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2003
- * Reinhard Meyer, EMK Elektronik GmbH, r.meyer@emk-elektronik.de
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-#if defined (CONFIG_TOP860)
-  typedef unsigned short FLASH_PORT_WIDTH;
-  typedef volatile unsigned short FLASH_PORT_WIDTHV;
-  #define	FLASH_ID_MASK	0xFF
-
-  #define FPW	FLASH_PORT_WIDTH
-  #define FPWV	FLASH_PORT_WIDTHV
-
-  #define FLASH_CYCLE1	0x0555
-  #define FLASH_CYCLE2	0x02aa
-  #define FLASH_ID1		0
-  #define FLASH_ID2		1
-  #define FLASH_ID3		0x0e
-  #define FLASH_ID4		0x0F
-#endif
-
-#if defined (CONFIG_TOP5200) && !defined (CONFIG_LITE5200)
-  typedef unsigned char FLASH_PORT_WIDTH;
-  typedef volatile unsigned char FLASH_PORT_WIDTHV;
-  #define	FLASH_ID_MASK	0xFF
-
-  #define FPW	FLASH_PORT_WIDTH
-  #define FPWV	FLASH_PORT_WIDTHV
-
-  #define FLASH_CYCLE1	0x0aaa
-  #define FLASH_CYCLE2	0x0555
-  #define FLASH_ID1		0
-  #define FLASH_ID2		2
-  #define FLASH_ID3		0x1c
-  #define FLASH_ID4		0x1E
-#endif
-
-#if defined (CONFIG_TOP5200) && defined (CONFIG_LITE5200)
-  typedef unsigned char FLASH_PORT_WIDTH;
-  typedef volatile unsigned char FLASH_PORT_WIDTHV;
-  #define	FLASH_ID_MASK	0xFF
-
-  #define FPW	FLASH_PORT_WIDTH
-  #define FPWV	FLASH_PORT_WIDTHV
-
-  #define FLASH_CYCLE1	0x0555
-  #define FLASH_CYCLE2	0x02aa
-  #define FLASH_ID1		0
-  #define FLASH_ID2		1
-  #define FLASH_ID3		0x0E
-  #define FLASH_ID4		0x0F
-#endif
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(FPWV *addr, flash_info_t *info);
-static void flash_reset(flash_info_t *info);
-static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
-flash_info_t *flash_get_info(ulong base);
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-unsigned long flash_init (void)
-{
-	unsigned long size = 0;
-	int i = 0;
-	extern void flash_preinit(void);
-	extern void flash_afterinit(uint, ulong, ulong);
-	ulong flashbase = CONFIG_SYS_FLASH_BASE;
-
-	flash_preinit();
-
-	/* There is only ONE FLASH device */
-	memset(&flash_info[i], 0, sizeof(flash_info_t));
-	flash_info[i].size =
-			flash_get_size((FPW *)flashbase, &flash_info[i]);
-	size += flash_info[i].size;
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_SYS_MONITOR_BASE,
-		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-		      flash_get_info(CONFIG_SYS_MONITOR_BASE));
-#endif
-
-#ifdef	CONFIG_ENV_IS_IN_FLASH
-	/* ENV protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_ENV_ADDR,
-		      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
-		      flash_get_info(CONFIG_ENV_ADDR));
-#endif
-
-
-	flash_afterinit(i, flash_info[i].start[0], flash_info[i].size);
-	return size ? size : 1;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_reset(flash_info_t *info)
-{
-	FPWV *base = (FPWV *)(info->start[0]);
-
-	/* Put FLASH back in read mode */
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
-		*base = (FPW)0x00FF00FF;	/* Intel Read Mode */
-	else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
-		*base = (FPW)0x00F000F0;	/* AMD Read Mode */
-}
-
-/*-----------------------------------------------------------------------
- */
-
-flash_info_t *flash_get_info(ulong base)
-{
-	int i;
-	flash_info_t * info;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
-		info = & flash_info[i];
-		if (info->size &&
-			info->start[0] <= base && base <= info->start[0] + info->size - 1)
-			break;
-	}
-
-	return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-void flash_print_info (flash_info_t *info)
-{
-	int i;
-	uchar *boottype;
-	uchar *bootletter;
-	char *fmt;
-	uchar botbootletter[] = "B";
-	uchar topbootletter[] = "T";
-	uchar botboottype[] = "bottom boot sector";
-	uchar topboottype[] = "top boot sector";
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-#if 0
-	case FLASH_MAN_BM:	printf ("BRIGHT MICRO ");	break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	case FLASH_MAN_SST:	printf ("SST ");		break;
-	case FLASH_MAN_STM:	printf ("STM ");		break;
-	case FLASH_MAN_INTEL:	printf ("INTEL ");		break;
-#endif
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	/* check for top or bottom boot, if it applies */
-	if (info->flash_id & FLASH_BTYPE) {
-		boottype = botboottype;
-		bootletter = botbootletter;
-	}
-	else {
-		boottype = topboottype;
-		bootletter = topbootletter;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM160T:
-	case FLASH_AM160B:
-		fmt = "29LV160%s (16 Mbit, %s)\n";
-		break;
-	case FLASH_AMLV640U:
-		fmt = "29LV640M (64 Mbit)\n";
-		break;
-	case FLASH_AMDLV065D:
-		fmt = "29LV065D (64 Mbit)\n";
-		break;
-	case FLASH_AMLV256U:
-		fmt = "29LV256M (256 Mbit)\n";
-		break;
-	default:
-		fmt = "Unknown Chip Type\n";
-		break;
-	}
-
-	printf (fmt, bootletter, boottype);
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20,
-		info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-
-	for (i=0; i<info->sector_count; ++i) {
-		ulong	size;
-		int		erased;
-		ulong	*flash = (unsigned long *) info->start[i];
-
-		if ((i % 5) == 0) {
-			printf ("\n   ");
-		}
-
-		/*
-		 * Check if whole sector is erased
-		 */
-		size =
-			(i != (info->sector_count - 1)) ?
-			(info->start[i + 1] - info->start[i]) >> 2 :
-		(info->start[0] + info->size - info->start[i]) >> 2;
-
-		for (
-			flash = (unsigned long *) info->start[i], erased = 1;
-				(flash != (unsigned long *) info->start[i] + size) && erased;
-					flash++
-			)
-			erased = *flash == ~0x0UL;
-
-		printf (" %08lX %s %s",
-			info->start[i],
-			erased ? "E": " ",
-			info->protect[i] ? "(RO)" : "    ");
-	}
-
-	printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-ulong flash_get_size (FPWV *addr, flash_info_t *info)
-{
-	int		i;
-
-	/* Write auto select command: read Manufacturer ID */
-	/* Write auto select command sequence and test FLASH answer */
-	addr[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* for AMD, Intel ignores this */
-	addr[FLASH_CYCLE2] = (FPW)0x00550055;	/* for AMD, Intel ignores this */
-	addr[FLASH_CYCLE1] = (FPW)0x00900090;	/* selects Intel or AMD */
-
-	/* The manufacturer codes are only 1 byte, so just use 1 byte.
-	 * This works for any bus width and any FLASH device width.
-	 */
-	udelay(100);
-	switch (addr[FLASH_ID1] & 0xff) {
-
-	case (uchar)AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-
-#if 0
-	case (uchar)INTEL_MANUFACT:
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-#endif
-
-	default:
-		printf ("unknown vendor=%x ", addr[FLASH_ID1] & 0xff);
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		break;
-	}
-
-	/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
-	if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[FLASH_ID2]) {
-
-	case (FPW)AMD_ID_LV160B:
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00200000;
-		info->start[0] = (ulong)addr;
-		info->start[1] = (ulong)addr + 0x4000;
-		info->start[2] = (ulong)addr + 0x6000;
-		info->start[3] = (ulong)addr + 0x8000;
-		for (i = 4; i < info->sector_count; i++)
-		{
-			info->start[i] = (ulong)addr + 0x10000 * (i-3);
-		}
-		break;
-
-	case (FPW)AMD_ID_LV065D:
-		info->flash_id += FLASH_AMDLV065D;
-		info->sector_count = 128;
-		info->size = 0x00800000;
-		for (i = 0; i < info->sector_count; i++)
-		{
-			info->start[i] = (ulong)addr + 0x10000 * i;
-		}
-		break;
-
-	case (FPW)AMD_ID_MIRROR:
-		/* MIRROR BIT FLASH, read more ID bytes */
-		if ((FPW)addr[FLASH_ID3] == (FPW)AMD_ID_LV640U_2 &&
-			(FPW)addr[FLASH_ID4] == (FPW)AMD_ID_LV640U_3)
-		{
-			info->flash_id += FLASH_AMLV640U;
-			info->sector_count = 128;
-			info->size = 0x00800000;
-			for (i = 0; i < info->sector_count; i++)
-			{
-				info->start[i] = (ulong)addr + 0x10000 * i;
-			}
-			break;
-		}
-		if ((FPW)addr[FLASH_ID3] == (FPW)AMD_ID_LV256U_2 &&
-			(FPW)addr[FLASH_ID4] == (FPW)AMD_ID_LV256U_3)
-		{
-			/* attention: only the first 16 MB will be used in u-boot */
-			info->flash_id += FLASH_AMLV256U;
-			info->sector_count = 256;
-			info->size = 0x01000000;
-			for (i = 0; i < info->sector_count; i++)
-			{
-				info->start[i] = (ulong)addr + 0x10000 * i;
-			}
-			break;
-		}
-
-		/* fall thru to here ! */
-	default:
-		printf ("unknown AMD device=%x %x %x",
-			(FPW)addr[FLASH_ID2],
-			(FPW)addr[FLASH_ID3],
-			(FPW)addr[FLASH_ID4]);
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0x800000;
-		break;
-	}
-
-	/* Put FLASH back in read mode */
-	flash_reset(info);
-
-	return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	FPWV *addr;
-	int flag, prot, sect;
-	int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
-	ulong start, now, last;
-	int rcode = 0;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM160B:
-	case FLASH_AMLV640U:
-		break;
-	case FLASH_UNKNOWN:
-	default:
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	last  = get_timer(0);
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last && rcode == 0; sect++) {
-
-		if (info->protect[sect] != 0)	/* protected, skip it */
-			continue;
-
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts();
-
-		addr = (FPWV *)(info->start[sect]);
-		if (intel) {
-			*addr = (FPW)0x00500050; /* clear status register */
-			*addr = (FPW)0x00200020; /* erase setup */
-			*addr = (FPW)0x00D000D0; /* erase confirm */
-		}
-		else {
-			/* must be AMD style if not Intel */
-			FPWV *base;		/* first address in bank */
-
-			base = (FPWV *)(info->start[0]);
-			base[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* unlock */
-			base[FLASH_CYCLE2] = (FPW)0x00550055;	/* unlock */
-			base[FLASH_CYCLE1] = (FPW)0x00800080;	/* erase mode */
-			base[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* unlock */
-			base[FLASH_CYCLE2] = (FPW)0x00550055;	/* unlock */
-			*addr = (FPW)0x00300030;	/* erase sector */
-		}
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-
-		start = get_timer(0);
-
-		/* wait at least 50us for AMD, 80us for Intel.
-		 * Let's wait 1 ms.
-		 */
-		udelay (1000);
-
-		while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
-			if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-				printf ("Timeout\n");
-
-				if (intel) {
-					/* suspend erase	*/
-					*addr = (FPW)0x00B000B0;
-				}
-
-				flash_reset(info);	/* reset to read mode */
-				rcode = 1;		/* failed */
-				break;
-			}
-
-			/* show that we're waiting */
-			if ((get_timer(last)) > CONFIG_SYS_HZ) {/* every second */
-				putc ('.');
-				last = get_timer(0);
-			}
-		}
-
-		/* show that we're waiting */
-		if ((get_timer(last)) > CONFIG_SYS_HZ) {	/* every second */
-			putc ('.');
-			last = get_timer(0);
-		}
-
-		flash_reset(info);	/* reset to read mode */
-	}
-
-	printf (" done\n");
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
-	int bytes;	  /* number of bytes to program in current word		*/
-	int left;	  /* number of bytes left to program			*/
-	int i, res;
-
-	for (left = cnt, res = 0;
-		 left > 0 && res == 0;
-		 addr += sizeof(data), left -= sizeof(data) - bytes) {
-
-		bytes = addr & (sizeof(data) - 1);
-		addr &= ~(sizeof(data) - 1);
-
-		/* combine source and destination data so can program
-		 * an entire word of 16 or 32 bits
-		 */
-		for (i = 0; i < sizeof(data); i++) {
-			data <<= 8;
-			if (i < bytes || i - bytes >= left )
-				data += *((uchar *)addr + i);
-			else
-				data += *src++;
-		}
-
-		/* write one word to the flash */
-		switch (info->flash_id & FLASH_VENDMASK) {
-		case FLASH_MAN_AMD:
-			res = write_word_amd(info, (FPWV *)addr, data);
-			break;
-		default:
-			/* unknown flash type, error! */
-			printf ("missing or unknown FLASH type\n");
-			res = 1;	/* not really a timeout, but gives error */
-			break;
-		}
-	}
-
-	return (res);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
-{
-	ulong start;
-	int flag;
-	int res = 0;	/* result, assume success	*/
-	FPWV *base;		/* first address in flash bank	*/
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*dest & data) != data) {
-		return (2);
-	}
-
-
-	base = (FPWV *)(info->start[0]);
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	base[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* unlock */
-	base[FLASH_CYCLE2] = (FPW)0x00550055;	/* unlock */
-	base[FLASH_CYCLE1] = (FPW)0x00A000A0;	/* selects program mode */
-
-	*dest = data;		/* start programming the data	*/
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	start = get_timer (0);
-
-	/* data polling for D7 */
-	while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			*dest = (FPW)0x00F000F0;	/* reset bank */
-			res = 1;
-		}
-	}
-
-	return (res);
-}
diff --git a/board/emk/common/vpd.c b/board/emk/common/vpd.c
deleted file mode 100644
index d9af92a528..0000000000
--- a/board/emk/common/vpd.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * (C) Copyright 2003
- * Reinhard Meyer, EMK Elektronik GmbH, r.meyer@emk-elektronik.de
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-
-/*****************************************************************************
- * read "factory" part of EEPROM and set some environment variables
- *****************************************************************************/
-void read_factory_r (void)
-{
-	/* read 'factory' part of EEPROM */
-	uchar buf[81];
-	uchar *p;
-	uint length;
-	uint addr;
-	uint len;
-
-	/* get length first */
-	addr = CONFIG_SYS_FACT_OFFSET;
-	if (eeprom_read (CONFIG_SYS_I2C_FACT_ADDR, addr, buf, 2)) {
-	  bailout:
-		printf ("cannot read factory configuration\n");
-		printf ("be sure to set ethaddr	yourself!\n");
-		return;
-	}
-	length = buf[0] + (buf[1] << 8);
-	addr += 2;
-
-	/* sanity check */
-	if (length < 20 || length > CONFIG_SYS_FACT_SIZE - 2)
-		goto bailout;
-
-	/* read lines */
-	while (length > 0) {
-		/* read one line */
-		len = length > 80 ? 80 : length;
-		if (eeprom_read (CONFIG_SYS_I2C_FACT_ADDR, addr, buf, len))
-			goto bailout;
-		/* mark end of buffer */
-		buf[len] = 0;
-		/* search end of line */
-		for (p = buf; *p && *p != 0x0a; p++);
-		if (!*p)
-			goto bailout;
-		*p++ = 0;
-		/* advance to next line start */
-		length -= p - buf;
-		addr += p - buf;
-		/*printf ("%s\n", buf); */
-		/* search for our specific entry */
-		if (!strncmp ((char *) buf, "[RLA/lan/Ethernet] ", 19)) {
-			setenv ("ethaddr", (char *)(buf + 19));
-		} else if (!strncmp ((char *) buf, "[BOARD/SERIAL] ", 15)) {
-			setenv ("serial#", (char *)(buf + 15));
-		} else if (!strncmp ((char *) buf, "[BOARD/TYPE] ", 13)) {
-			setenv ("board_id", (char *)(buf + 13));
-		}
-	}
-}