powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512x

There was for long time no activity in the mpx5xxx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in mpc5xxx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

4 files changed, 0 insertions, 225 deletions

diff --git a/board/esd/mecp5123/Kconfig b/board/esd/mecp5123/Kconfig
deleted file mode 100644
index 3f2a411196..0000000000
--- a/board/esd/mecp5123/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MECP5123
-
-config SYS_BOARD
-	default "mecp5123"
-
-config SYS_VENDOR
-	default "esd"
-
-config SYS_CONFIG_NAME
-	default "mecp5123"
-
-endif
diff --git a/board/esd/mecp5123/MAINTAINERS b/board/esd/mecp5123/MAINTAINERS
deleted file mode 100644
index ae5fcead90..0000000000
--- a/board/esd/mecp5123/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MECP5123 BOARD
-M:	Reinhard Arlt <reinhard.arlt@esd-electronics.com>
-S:	Maintained
-F:	board/esd/mecp5123/
-F:	include/configs/mecp5123.h
-F:	configs/mecp5123_defconfig
diff --git a/board/esd/mecp5123/Makefile b/board/esd/mecp5123/Makefile
deleted file mode 100644
index f5ebb0144f..0000000000
--- a/board/esd/mecp5123/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# (C) Copyright 2009 Wolfgang Denk <wd@denx.de>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= mecp5123.o
diff --git a/board/esd/mecp5123/mecp5123.c b/board/esd/mecp5123/mecp5123.c
deleted file mode 100644
index 78a6b66110..0000000000
--- a/board/esd/mecp5123/mecp5123.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * (C) Copyright 2009 Wolfgang Denk <wd@denx.de>
- * (C) Copyright 2009 Dave Srl www.dave.eu
- * (C) Copyright 2009 Stefan Roese <sr@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/bitops.h>
-#include <command.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/mpc512x.h>
-#include <fdt_support.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int eeprom_write_enable(unsigned dev_addr, int state)
-{
-	return -ENOSYS;
-}
-
-int board_early_init_f(void)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	int i;
-
-	/*
-	 * Initialize Local Window for boot access
-	 */
-	out_be32(&im->sysconf.lpbaw,
-		 CSAW_START(0xffb00000) | CSAW_STOP(0xffb00000, 0x00010000));
-	sync_law(&im->sysconf.lpbaw);
-
-	/*
-	 * Configure MSCAN clocks
-	 */
-	for (i=0; i<4; ++i) {
-		out_be32(&im->clk.msccr[i], 0x00300000);
-		out_be32(&im->clk.msccr[i], 0x00310000);
-	}
-
-	/*
-	 * Configure GPIO's
-	 */
-	clrbits_be32(&im->gpio.gpodr, 0x000000e0);
-	clrbits_be32(&im->gpio.gpdir, 0x00ef0000);
-	setbits_be32(&im->gpio.gpdir, 0x001000e0);
-	setbits_be32(&im->gpio.gpdat, 0x00100000);
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size(0, fixed_sdram(NULL, NULL, 0));
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
-	u32 val;
-
-	/*
-	 * Optimize access to profibus chip (VPC3) on the local bus
-	 */
-
-	/*
-	 * Select 1:1 for LPC_DIV
-	 */
-	val = in_be32(&im->clk.scfr[0]) & ~SCFR1_LPC_DIV_MASK;
-	out_be32(&im->clk.scfr[0], val | (0x1 << SCFR1_LPC_DIV_SHIFT));
-
-	/*
-	 * Configure LPC Chips Select Deadcycle Control Register
-	 * CS0 - device can drive data 2 clock cycle(s) after CS deassertion
-	 * CS1 - device can drive data 1 clock cycle(s) after CS deassertion
-	 */
-	clrbits_be32(&im->lpc.cs_dccr, 0x000000ff);
-	setbits_be32(&im->lpc.cs_dccr, (0x00 << 4) | (0x01 << 0));
-
-	/*
-	 * Configure LPC Chips Select Holdcycle Control Register
-	 * CS0 - data is valid 2 clock cycle(s) after CS deassertion
-	 * CS1 - data is valid 1 clock cycle(s) after CS deassertion
-	 */
-	clrbits_be32(&im->lpc.cs_hccr, 0x000000ff);
-	setbits_be32(&im->lpc.cs_hccr, (0x00 << 4) | (0x01 << 0));
-
-	return 0;
-}
-
-static iopin_t ioregs_init[] = {
-	/* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */
-	{
-		offsetof(struct ioctrl512x, io_control_spdif_txclk), 3, 0,
-		IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	},
-	/* FUNC1=FEC_COL Sets Next 15 to FEC pads */
-	{
-		offsetof(struct ioctrl512x, io_control_psc0_0), 15, 0,
-		IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	},
-	/* FUNC1=SELECT LPC_CS1 */
-	{
-		offsetof(struct ioctrl512x, io_control_lpc_cs1), 1, 0,
-		IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	},
-	/* FUNC3=SELECT PSC5_2 */
-	{
-		offsetof(struct ioctrl512x, io_control_psc5_2), 1, 0,
-		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	},
-	/* FUNC3=SELECT PSC5_3 */
-	{
-		offsetof(struct ioctrl512x, io_control_psc5_3), 1, 0,
-		IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	},
-	/* FUNC3=SELECT PSC7_3 */
-	{
-		offsetof(struct ioctrl512x, io_control_psc7_3), 1, 0,
-		IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	},
-	/* FUNC3=SELECT PSC9_0 */
-	{
-		offsetof(struct ioctrl512x, io_control_psc9_0), 3, 0,
-		IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	},
-	/* FUNC3=SELECT PSC10_0 */
-	{
-		offsetof(struct ioctrl512x, io_control_psc10_0), 3, 0,
-		IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	},
-	/* FUNC3=SELECT PSC10_3 */
-	{
-		offsetof(struct ioctrl512x, io_control_psc10_3), 1, 0,
-		IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	},
-	/* FUNC3=SELECT PSC11_0 */
-	{
-		offsetof(struct ioctrl512x, io_control_psc11_0), 4, 0,
-		IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	},
-	/* FUNC0=SELECT IRQ0 */
-	{
-		offsetof(struct ioctrl512x, io_control_irq0), 4, 0,
-		IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	}
-};
-
-static iopin_t rev2_silicon_pci_ioregs_init[] = {
-	/* FUNC0=PCI Sets next 54 to PCI pads */
-	{
-		offsetof(struct ioctrl512x, io_control_pci_ad31), 54, 0,
-		IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_DS(0)
-	}
-};
-
-int checkboard(void)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	u32 spridr;
-
-	puts("Board: MECP_5123\n");
-
-	/*
-	 * Initialize function mux & slew rate IO inter alia on IO
-	 * Pins
-	 */
-	iopin_initialize(ioregs_init, ARRAY_SIZE(ioregs_init));
-
-	spridr = in_be32(&im->sysconf.spridr);
-	if (SVR_MJREV(spridr) >= 2)
-		iopin_initialize(rev2_silicon_pci_ioregs_init, 1);
-
-	return 0;
-}
-
-#ifdef CONFIG_OF_BOARD_SETUP
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-
-	return 0;
-}
-#endif /* CONFIG_OF_BOARD_SETUP */