diff options
author | Matthias Fuchs <matthias.fuchs@esd.eu> | 2015-01-12 22:47:19 +0100 |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2015-01-13 09:37:23 -0500 |
commit | 9a4018e09a2f2845b509145959deb08e599e87d6 (patch) | |
tree | 963210dc83d7b3aa85d15abad5f96a9b58d975d3 /board/esd | |
parent | 370572601027eee0c479b4094bd6e9ac31cdf042 (diff) |
ppc4xx: remove DP405 board
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Diffstat (limited to 'board/esd')
-rw-r--r-- | board/esd/dp405/Kconfig | 12 | ||||
-rw-r--r-- | board/esd/dp405/MAINTAINERS | 6 | ||||
-rw-r--r-- | board/esd/dp405/Makefile | 13 | ||||
-rw-r--r-- | board/esd/dp405/dp405.c | 112 | ||||
-rw-r--r-- | board/esd/dp405/flash.c | 85 |
5 files changed, 0 insertions, 228 deletions
diff --git a/board/esd/dp405/Kconfig b/board/esd/dp405/Kconfig deleted file mode 100644 index c0163aef0f..0000000000 --- a/board/esd/dp405/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DP405 - -config SYS_BOARD - default "dp405" - -config SYS_VENDOR - default "esd" - -config SYS_CONFIG_NAME - default "DP405" - -endif diff --git a/board/esd/dp405/MAINTAINERS b/board/esd/dp405/MAINTAINERS deleted file mode 100644 index 6833d8c688..0000000000 --- a/board/esd/dp405/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -DP405 BOARD -M: Matthias Fuchs <matthias.fuchs@esd-electronics.com> -S: Maintained -F: board/esd/dp405/ -F: include/configs/DP405.h -F: configs/DP405_defconfig diff --git a/board/esd/dp405/Makefile b/board/esd/dp405/Makefile deleted file mode 100644 index cfcfb66a15..0000000000 --- a/board/esd/dp405/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# Objects for Xilinx JTAG programming (CPLD) -CPLD = ../common/xilinx_jtag/lenval.o \ - ../common/xilinx_jtag/micro.o \ - ../common/xilinx_jtag/ports.o - -obj-y = dp405.o flash.o ../common/misc.o $(CPLD) diff --git a/board/esd/dp405/dp405.c b/board/esd/dp405/dp405.c deleted file mode 100644 index 730ff215e9..0000000000 --- a/board/esd/dp405/dp405.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * (C) Copyright 2001-2003 - * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <command.h> -#include <malloc.h> - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f (void) -{ - /* - * IRQ 0-15 405GP internally generated; active high; level sensitive - * IRQ 16 405GP internally generated; active low; level sensitive - * IRQ 17-24 RESERVED - * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive - * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive - * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive - * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive - * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive - * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive - * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive - */ - mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ - mtdcr(UIC0ER, 0x00000000); /* disable all ints */ - mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ - mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */ - mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ - mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/ - mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ - - /* - * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us - */ - mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */ - - /* - * Reset CPLD via GPIO13 (CS4) pin - */ - out_be32((void *)GPIO0_OR, - in_be32((void *)GPIO0_OR) & ~(0x80000000 >> 13)); - udelay(1000); /* wait 1ms */ - out_be32((void *)GPIO0_OR, - in_be32((void *)GPIO0_OR) | (0x80000000 >> 13)); - udelay(1000); /* wait 1ms */ - - return 0; -} - -int misc_init_r (void) -{ - /* adjust flash start and offset */ - gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; - gd->bd->bi_flashoffset = 0; - - return (0); -} - - -/* - * Check Board Identity: - */ - -int checkboard (void) -{ - char str[64]; - int i = getenv_f("serial#", str, sizeof(str)); - unsigned char trans[16] = {0x0,0x8,0x4,0xc,0x2,0xa,0x6,0xe, - 0x1,0x9,0x5,0xd,0x3,0xb,0x7,0xf}; - unsigned char id1, id2, rev; - - puts ("Board: "); - - if (i == -1) - puts ("### No HW ID - assuming DP405"); - else - puts(str); - - id1 = trans[(~(in_be32((void *)GPIO0_IR) >> 5)) & 0x0000000f]; - id2 = trans[(~(in_be32((void *)GPIO0_IR) >> 9)) & 0x0000000f]; - - rev = in_8((void *)0xf0001000); - if (rev & 0x10) /* old DP405 compatibility */ - rev = in_8((void *)0xf0000800); - - switch (rev & 0xc0) { - case 0x00: - puts(" (HW=DP405"); - break; - case 0x80: - puts(" (HW=DP405/CO"); - break; - case 0xc0: - puts(" (HW=DN405"); - break; - } - printf(", ID=0x%1X%1X, PLD=0x%02X", id2, id1, rev & 0x0f); - - if ((rev & 0xc0) == 0xc0) { - printf(", C5V=%s", - in_be32((void *)GPIO0_IR) & 0x40000000 ? "off" : "on"); - } - puts(")\n"); - - return 0; -} diff --git a/board/esd/dp405/flash.c b/board/esd/dp405/flash.c deleted file mode 100644 index 23e81642e0..0000000000 --- a/board/esd/dp405/flash.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * (C) Copyright 2001 - * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/ppc4xx.h> -#include <asm/processor.h> - -/* - * include common flash code (for esd boards) - */ -#include "../common/flash.c" - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long * addr, flash_info_t * info); -static void flash_get_offsets (ulong base, flash_info_t * info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - unsigned long size_b0; - int i; - uint pbcr; - unsigned long base_b0; - int size_val = 0; - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here - FIXME XXX */ - - size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0<<20); - } - - /* Setup offsets */ - flash_get_offsets (-size_b0, &flash_info[0]); - - /* Re-do sizing to get full correct info */ - mtdcr(EBC0_CFGADDR, PB0CR); - pbcr = mfdcr(EBC0_CFGDATA); - mtdcr(EBC0_CFGADDR, PB0CR); - base_b0 = -size_b0; - switch (size_b0) { - case 1 << 20: - size_val = 0; - break; - case 2 << 20: - size_val = 1; - break; - case 4 << 20: - size_val = 2; - break; - case 8 << 20: - size_val = 3; - break; - case 16 << 20: - size_val = 4; - break; - } - pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17); - mtdcr(EBC0_CFGDATA, pbcr); - - /* Monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - -CONFIG_SYS_MONITOR_LEN, - 0xffffffff, - &flash_info[0]); - - flash_info[0].size = size_b0; - - return (size_b0); -} |