Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

4 files changed, 139 insertions, 21 deletions

diff --git a/board/freescale/ls2080aqds/MAINTAINERS b/board/freescale/ls2080aqds/MAINTAINERS
index 8f78b67baa..79877d7774 100644
--- a/board/freescale/ls2080aqds/MAINTAINERS
+++ b/board/freescale/ls2080aqds/MAINTAINERS
@@ -1,5 +1,5 @@
 LS2080A BOARD
-M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
+M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>, Priyanka Jain <priyanka.jain@nxp.com>
 S:	Maintained
 F:	board/freescale/ls2080aqds/
 F:	board/freescale/ls2080a/ls2080aqds.c
diff --git a/board/freescale/ls2080aqds/README b/board/freescale/ls2080aqds/README
index f288750993..2808bd5851 100644
--- a/board/freescale/ls2080aqds/README
+++ b/board/freescale/ls2080aqds/README
@@ -2,14 +2,14 @@ Overview
 --------
 The LS2080A Development System (QDS) is a high-performance computing,
 evaluation, and development platform that supports the QorIQ LS2080A
-Layerscape Architecture processor. The LS2080AQDS provides validation and
-SW development platform for the Freescale LS2080A processor series, with
-a complete debugging environment.
+and LS2088A Layerscape Architecture processor. The LS2080AQDS provides
+validation and SW development platform for the Freescale LS2080A, LS2088A
+processor series, with a complete debugging environment.
 
-LS2080A SoC Overview
+LS2080A, LS2088A SoC Overview
 --------------------
-Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A
-SoC overview.
+Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A,
+LS2088A SoC overview.
 
  LS2080AQDS board Overview
  -----------------------
diff --git a/board/freescale/ls2080aqds/eth.c b/board/freescale/ls2080aqds/eth.c
index 95ff68b364..59361e9111 100644
--- a/board/freescale/ls2080aqds/eth.c
+++ b/board/freescale/ls2080aqds/eth.c
@@ -64,7 +64,7 @@ static int sgmii_riser_phy_addr[] = {
 };
 
 /* Slot2 does not have EMI connections */
-#define EMI_NONE	0xFFFFFFFF
+#define EMI_NONE	0xFF
 #define EMI1_SLOT1	0
 #define EMI1_SLOT2	1
 #define EMI1_SLOT3	2
@@ -144,8 +144,10 @@ static void sgmii_configure_repeater(int serdes_port)
 
 		mdelay(10);
 
-		if ((value & 0xfff) == 0x40f) {
+		if ((value & 0xfff) == 0x401) {
 			printf("DPMAC %d:PHY is ..... Configured\n", dpmac_id);
+			miiphy_write(dev[mii_bus], riser_phy_addr[dpmac],
+				     0x1f, 0);
 			continue;
 		}
 
@@ -181,28 +183,29 @@ static void sgmii_configure_repeater(int serdes_port)
 				if (ret > 0)
 					goto error;
 
-				mdelay(1);
+				mdelay(100);
 				ret = miiphy_read(dev[mii_bus],
 						  riser_phy_addr[dpmac],
 						  0x11, &value);
 				if (ret > 0)
 					goto error;
-				mdelay(10);
 
-				if ((value & 0xfff) == 0x40f) {
+				if ((value & 0xfff) == 0x401) {
 					printf("DPMAC %d :PHY is configured ",
 					       dpmac_id);
 					printf("after setting repeater 0x%x\n",
 					       value);
 					i = 5;
 					j = 5;
-				} else
+				} else {
 					printf("DPMAC %d :PHY is failed to ",
 					       dpmac_id);
 					printf("configure the repeater 0x%x\n",
 					       value);
 				}
+			}
 		}
+		miiphy_write(dev[mii_bus], riser_phy_addr[dpmac], 0x1f, 0);
 	}
 error:
 	if (ret)
@@ -470,7 +473,49 @@ static void initialize_dpmac_to_slot(void)
 		}
 		break;
 
+	case 0x39:
+		printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
+		       serdes1_prtcl);
+		if (hwconfig_f("xqsgmii", env_hwconfig)) {
+			lane_to_slot_fsm1[0] = EMI1_SLOT3;
+			lane_to_slot_fsm1[1] = EMI1_SLOT3;
+			lane_to_slot_fsm1[2] = EMI1_SLOT3;
+			lane_to_slot_fsm1[3] = EMI_NONE;
+		} else {
+			lane_to_slot_fsm1[0] = EMI_NONE;
+			lane_to_slot_fsm1[1] = EMI_NONE;
+			lane_to_slot_fsm1[2] = EMI_NONE;
+			lane_to_slot_fsm1[3] = EMI_NONE;
+		}
+		lane_to_slot_fsm1[4] = EMI1_SLOT3;
+		lane_to_slot_fsm1[5] = EMI1_SLOT3;
+		lane_to_slot_fsm1[6] = EMI1_SLOT3;
+		lane_to_slot_fsm1[7] = EMI_NONE;
+		break;
+
+	case 0x4D:
+		printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
+		       serdes1_prtcl);
+		if (hwconfig_f("xqsgmii", env_hwconfig)) {
+			lane_to_slot_fsm1[0] = EMI1_SLOT3;
+			lane_to_slot_fsm1[1] = EMI1_SLOT3;
+			lane_to_slot_fsm1[2] = EMI_NONE;
+			lane_to_slot_fsm1[3] = EMI_NONE;
+		} else {
+			lane_to_slot_fsm1[0] = EMI_NONE;
+			lane_to_slot_fsm1[1] = EMI_NONE;
+			lane_to_slot_fsm1[2] = EMI_NONE;
+			lane_to_slot_fsm1[3] = EMI_NONE;
+		}
+		lane_to_slot_fsm1[4] = EMI1_SLOT3;
+		lane_to_slot_fsm1[5] = EMI1_SLOT3;
+		lane_to_slot_fsm1[6] = EMI_NONE;
+		lane_to_slot_fsm1[7] = EMI_NONE;
+		break;
+
 	case 0x2A:
+	case 0x4B:
+	case 0x4C:
 		printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
 		       serdes1_prtcl);
 		break;
@@ -505,6 +550,38 @@ static void initialize_dpmac_to_slot(void)
 			lane_to_slot_fsm2[7] = EMI1_SLOT6;
 		}
 		break;
+
+	case 0x47:
+		printf("qds: WRIOP: Supported SerDes2 Protocol 0x%02x\n",
+		       serdes2_prtcl);
+		lane_to_slot_fsm2[0] = EMI_NONE;
+		lane_to_slot_fsm2[1] = EMI1_SLOT5;
+		lane_to_slot_fsm2[2] = EMI1_SLOT5;
+		lane_to_slot_fsm2[3] = EMI1_SLOT5;
+
+		if (hwconfig_f("xqsgmii", env_hwconfig)) {
+			lane_to_slot_fsm2[4] = EMI_NONE;
+			lane_to_slot_fsm2[5] = EMI1_SLOT5;
+			lane_to_slot_fsm2[6] = EMI1_SLOT5;
+			lane_to_slot_fsm2[7] = EMI1_SLOT5;
+		}
+		break;
+
+	case 0x57:
+		printf("qds: WRIOP: Supported SerDes2 Protocol 0x%02x\n",
+		       serdes2_prtcl);
+		if (hwconfig_f("xqsgmii", env_hwconfig)) {
+			lane_to_slot_fsm2[0] = EMI_NONE;
+			lane_to_slot_fsm2[1] = EMI_NONE;
+			lane_to_slot_fsm2[2] = EMI_NONE;
+			lane_to_slot_fsm2[3] = EMI_NONE;
+		}
+		lane_to_slot_fsm2[4] = EMI_NONE;
+		lane_to_slot_fsm2[5] = EMI_NONE;
+		lane_to_slot_fsm2[6] = EMI1_SLOT5;
+		lane_to_slot_fsm2[7] = EMI1_SLOT5;
+		break;
+
 	default:
 		printf(" %s qds: WRIOP: Unsupported SerDes2 Protocol 0x%02x\n",
 		       __func__ , serdes2_prtcl);
@@ -537,8 +614,10 @@ void ls2080a_handle_phy_interface_sgmii(int dpmac_id)
 
 	switch (serdes1_prtcl) {
 	case 0x07:
+	case 0x39:
+	case 0x4D:
+		lane = serdes_get_first_lane(FSL_SRDS_1, SGMII1 + dpmac_id - 1);
 
-		lane = serdes_get_first_lane(FSL_SRDS_1, SGMII1 + dpmac_id);
 		slot = lane_to_slot_fsm1[lane];
 
 		switch (++slot) {
@@ -559,6 +638,26 @@ void ls2080a_handle_phy_interface_sgmii(int dpmac_id)
 			wriop_set_mdio(dpmac_id, bus);
 			break;
 		case 3:
+			if (slot == EMI_NONE)
+				return;
+			if (serdes1_prtcl == 0x39) {
+				wriop_set_phy_address(dpmac_id,
+					riser_phy_addr[dpmac_id - 2]);
+				if (dpmac_id >= 6 && hwconfig_f("xqsgmii",
+								env_hwconfig))
+					wriop_set_phy_address(dpmac_id,
+						riser_phy_addr[dpmac_id - 3]);
+			} else {
+				wriop_set_phy_address(dpmac_id,
+					riser_phy_addr[dpmac_id - 2]);
+				if (dpmac_id >= 7 && hwconfig_f("xqsgmii",
+								env_hwconfig))
+					wriop_set_phy_address(dpmac_id,
+						riser_phy_addr[dpmac_id - 3]);
+			}
+			dpmac_info[dpmac_id].board_mux = EMI1_SLOT3;
+			bus = mii_dev_for_muxval(EMI1_SLOT3);
+			wriop_set_mdio(dpmac_id, bus);
 			break;
 		case 4:
 			break;
@@ -579,6 +678,8 @@ serdes2:
 	case 0x07:
 	case 0x08:
 	case 0x49:
+	case 0x47:
+	case 0x57:
 		lane = serdes_get_first_lane(FSL_SRDS_2, SGMII9 +
 							(dpmac_id - 9));
 		slot = lane_to_slot_fsm2[lane];
@@ -597,7 +698,23 @@ serdes2:
 			wriop_set_mdio(dpmac_id, bus);
 		break;
 		case 5:
-		break;
+			if (slot == EMI_NONE)
+				return;
+			if (serdes2_prtcl == 0x47) {
+				wriop_set_phy_address(dpmac_id,
+					      riser_phy_addr[dpmac_id - 10]);
+				if (dpmac_id >= 14 && hwconfig_f("xqsgmii",
+								 env_hwconfig))
+					wriop_set_phy_address(dpmac_id,
+						riser_phy_addr[dpmac_id - 11]);
+			} else {
+				wriop_set_phy_address(dpmac_id,
+					riser_phy_addr[dpmac_id - 11]);
+			}
+			dpmac_info[dpmac_id].board_mux = EMI1_SLOT5;
+			bus = mii_dev_for_muxval(EMI1_SLOT5);
+			wriop_set_mdio(dpmac_id, bus);
+			break;
 		case 6:
 			/* Slot housing a SGMII riser card? */
 			wriop_set_phy_address(dpmac_id,
@@ -691,6 +808,8 @@ void ls2080a_handle_phy_interface_xsgmii(int i)
 
 	switch (serdes1_prtcl) {
 	case 0x2A:
+	case 0x4B:
+	case 0x4C:
 		/*
 		 * XFI does not need a PHY to work, but to avoid U-Boot use
 		 * default PHY address which is zero to a MAC when it found
diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c
index d07ca18af9..73a61fd75a 100644
--- a/board/freescale/ls2080aqds/ls2080aqds.c
+++ b/board/freescale/ls2080aqds/ls2080aqds.c
@@ -292,14 +292,16 @@ void fdt_fixup_board_enet(void *fdt)
 	else
 		fdt_status_fail(fdt, offset);
 }
+
+void board_quiesce_devices(void)
+{
+	fsl_mc_ldpaa_exit(gd->bd);
+}
 #endif
 
 #ifdef CONFIG_OF_BOARD_SETUP
 int ft_board_setup(void *blob, bd_t *bd)
 {
-#ifdef CONFIG_FSL_MC_ENET
-	int err;
-#endif
 	u64 base[CONFIG_NR_DRAM_BANKS];
 	u64 size[CONFIG_NR_DRAM_BANKS];
 
@@ -317,9 +319,6 @@ int ft_board_setup(void *blob, bd_t *bd)
 
 #ifdef CONFIG_FSL_MC_ENET
 	fdt_fixup_board_enet(blob);
-	err = fsl_mc_ldpaa_exit(bd);
-	if (err)
-		return err;
 #endif
 
 	return 0;