armv8: LS2080A: Rename LS2085A to reflect LS2080A

LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP
personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc.
So renaming existing LS2085A code base to reflect LS2080A (Prime personality)

Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
[York Sun: Dropped #ifdef in cpu.c for cpu_type_list]
Reviewed-by: York Sun <yorksun@freescale.com>

9 files changed, 931 insertions, 0 deletions

diff --git a/board/freescale/ls2080ardb/Kconfig b/board/freescale/ls2080ardb/Kconfig
new file mode 100644
index 0000000000..fe02575cf9
--- /dev/null
+++ b/board/freescale/ls2080ardb/Kconfig
@@ -0,0 +1,16 @@
+
+if TARGET_LS2080ARDB
+
+config SYS_BOARD
+	default "ls2080ardb"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_SOC
+	default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+	default "ls2080ardb"
+
+endif
diff --git a/board/freescale/ls2080ardb/MAINTAINERS b/board/freescale/ls2080ardb/MAINTAINERS
new file mode 100644
index 0000000000..aac81104db
--- /dev/null
+++ b/board/freescale/ls2080ardb/MAINTAINERS
@@ -0,0 +1,8 @@
+LS2080A BOARD
+M:	Prabhakar Kushwaha <prabhakar@freescale.com>
+S:	Maintained
+F:	board/freescale/ls2080ardb/
+F:	board/freescale/ls2080a/ls2080ardb.c
+F:	include/configs/ls2080ardb.h
+F:	configs/ls2080ardb_defconfig
+F:	configs/ls2080ardb_nand_defconfig
diff --git a/board/freescale/ls2080ardb/Makefile b/board/freescale/ls2080ardb/Makefile
new file mode 100644
index 0000000000..6a52167be1
--- /dev/null
+++ b/board/freescale/ls2080ardb/Makefile
@@ -0,0 +1,8 @@
+#
+# Copyright 2015 Freescale Semiconductor
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += ls2080ardb.o eth_ls2080rdb.o
+obj-y += ddr.o
diff --git a/board/freescale/ls2080ardb/README b/board/freescale/ls2080ardb/README
new file mode 100644
index 0000000000..7fc2569648
--- /dev/null
+++ b/board/freescale/ls2080ardb/README
@@ -0,0 +1,120 @@
+Overview
+--------
+The LS2080A Reference Design (RDB) is a high-performance computing,
+evaluation, and development platform that supports the QorIQ LS2080A
+Layerscape Architecture processor.
+
+LS2080A SoC Overview
+------------------
+The LS2080A integrated multicore processor combines eight ARM Cortex-A57
+processor cores with high-performance data path acceleration logic and network
+and peripheral bus interfaces required for networking, telecom/datacom,
+wireless infrastructure, and mil/aerospace applications.
+
+The LS2080A SoC includes the following function and features:
+
+ - Eight 64-bit ARM Cortex-A57 CPUs
+ - 1 MB platform cache with ECC
+ - Two 64-bit DDR4 SDRAM memory controllers with ECC and interleaving support
+ - One secondary 32-bit DDR4 SDRAM memory controller, intended for use by
+  the AIOP
+ - Data path acceleration architecture (DPAA2) incorporating acceleration for
+ the following functions:
+   - Packet parsing, classification, and distribution (WRIOP)
+   - Queue and Hardware buffer management for scheduling, packet sequencing, and
+     congestion management, buffer allocation and de-allocation (QBMan)
+   - Cryptography acceleration (SEC) at up to 10 Gbps
+   - RegEx pattern matching acceleration (PME) at up to 10 Gbps
+   - Decompression/compression acceleration (DCE) at up to 20 Gbps
+   - Accelerated I/O processing (AIOP) at up to 20 Gbps
+   - QDMA engine
+ - 16 SerDes lanes at up to 10.3125 GHz
+ - Ethernet interfaces
+   - Up to eight 10 Gbps Ethernet MACs
+   - Up to eight 1 / 2.5 Gbps Ethernet MACs
+ - High-speed peripheral interfaces
+   - Four PCIe 3.0 controllers, one supporting SR-IOV
+ - Additional peripheral interfaces
+   - Two serial ATA (SATA 3.0) controllers
+   - Two high-speed USB 3.0 controllers with integrated PHY
+   - Enhanced secure digital host controller (eSDXC/eMMC)
+   - Serial peripheral interface (SPI) controller
+   - Quad Serial Peripheral Interface (QSPI) Controller
+   - Four I2C controllers
+   - Two DUARTs
+   - Integrated flash controller (IFC 2.0) supporting NAND and NOR flash
+ - Support for hardware virtualization and partitioning enforcement
+ - QorIQ platform's trust architecture 3.0
+ - Service processor (SP) provides pre-boot initialization and secure-boot
+  capabilities
+
+ LS2080ARDB board Overview
+ -----------------------
+ - SERDES Connections, 16 lanes supporting:
+      - PCI Express - 3.0
+      - SATA 3.0
+      - XFI
+ - DDR Controller
+     - Two ports of 72-bits (8-bits ECC) DDR4. Each port supports four
+       chip-selects and two DIMM connectors. Support is up to 2133MT/s.
+     - One port of 40-bits (8-bits ECC) DDR4 which supports four chip-selects
+       and two DIMM connectors. Support is up to 1600MT/s.
+ -IFC/Local Bus
+    - IFC rev. 2.0 implementation supporting Little Endian connection scheme.
+    - 128 MB NOR flash 16-bit data bus
+    - One 2 GB NAND flash with ECC support
+    - CPLD connection
+ - USB 3.0
+    - Two high speed USB 3.0 ports
+    - First USB 3.0 port configured as Host with Type-A connector
+    - Second USB 3.0 port configured as OTG with micro-AB connector
+ - SDHC adapter
+    - SD Card Rev 2.0 and Rev 3.0
+ - DSPI
+    - 128 MB high-speed flash Memory for boot code and storage (up to 108MHz)
+ - 4 I2C controllers
+ - Two SATA onboard connectors
+ - UART
+ - ARM JTAG support
+
+Memory map from core's view
+----------------------------
+0x00_0000_0000 .. 0x00_000F_FFFF	Boot Rom
+0x00_0100_0000 .. 0x00_0FFF_FFFF	CCSR
+0x00_1800_0000 .. 0x00_181F_FFFF	OCRAM
+0x00_3000_0000 .. 0x00_3FFF_FFFF	IFC region #1
+0x00_8000_0000 .. 0x00_FFFF_FFFF	DDR region #1
+0x05_1000_0000 .. 0x05_FFFF_FFFF	IFC region #2
+0x80_8000_0000 .. 0xFF_FFFF_FFFF	DDR region #2
+
+Other addresses are either reserved, or not used directly by u-boot.
+This list should be updated when more addresses are used.
+
+IFC region map from core's view
+-------------------------------
+During boot i.e. IFC Region #1:-
+  0x30000000 - 0x37ffffff : 128MB : NOR flash
+  0x3C000000 - 0x40000000 : 64MB  : CPLD
+
+After relocate to DDR i.e. IFC Region #2:-
+  0x5_1000_0000..0x5_1fff_ffff	Memory Hole
+  0x5_2000_0000..0x5_3fff_ffff	IFC CSx (CPLD, NAND and others 512MB)
+  0x5_4000_0000..0x5_7fff_ffff	ASIC or others 1GB
+  0x5_8000_0000..0x5_bfff_ffff	IFC CS0 1GB (NOR/Promjet)
+  0x5_C000_0000..0x5_ffff_ffff	IFC CS1 1GB (NOR/Promjet)
+
+Booting Options
+---------------
+a) NOR boot
+b) NAND boot
+
+Booting Linux flavors which do not support 48-bit VA (< Linux 3.18)
+-------------------------------------------------------------------
+One needs to use appropriate bootargs to boot Linux flavors which do
+not support 48-bit VA (for e.g. < Linux 3.18) by appending mem=2048M, as shown
+below:
+
+=> setenv bootargs 'console=ttyS1,115200 root=/dev/ram
+   earlycon=uart8250,mmio,0x21c0600,115200 default_hugepagesz=2m hugepagesz=2m
+   hugepages=16 mem=2048M'
+
diff --git a/board/freescale/ls2080ardb/ddr.c b/board/freescale/ls2080ardb/ddr.c
new file mode 100644
index 0000000000..ae681de35e
--- /dev/null
+++ b/board/freescale/ls2080ardb/ddr.c
@@ -0,0 +1,199 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
+#include "ddr.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
+{
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
+	u8 dq_mapping_0, dq_mapping_2, dq_mapping_3;
+#endif
+	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
+	ulong ddr_freq;
+	int slot;
+
+	if (ctrl_num > 2) {
+		printf("Not supported controller number %d\n", ctrl_num);
+		return;
+	}
+
+	for (slot = 0; slot < CONFIG_DIMM_SLOTS_PER_CTLR; slot++) {
+		if (pdimm[slot].n_ranks)
+			break;
+	}
+
+	if (slot >= CONFIG_DIMM_SLOTS_PER_CTLR)
+		return;
+
+	/*
+	 * we use identical timing for all slots. If needed, change the code
+	 * to  pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num];
+	 */
+	if (popts->registered_dimm_en)
+		pbsp = rdimms[ctrl_num];
+	else
+		pbsp = udimms[ctrl_num];
+
+
+	/* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr
+	 * freqency and n_banks specified in board_specific_parameters table.
+	 */
+	ddr_freq = get_ddr_freq(ctrl_num) / 1000000;
+	while (pbsp->datarate_mhz_high) {
+		if (pbsp->n_ranks == pdimm[slot].n_ranks &&
+		    (pdimm[slot].rank_density >> 30) >= pbsp->rank_gb) {
+			if (ddr_freq <= pbsp->datarate_mhz_high) {
+				popts->clk_adjust = pbsp->clk_adjust;
+				popts->wrlvl_start = pbsp->wrlvl_start;
+				popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+				popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+				goto found;
+			}
+			pbsp_highest = pbsp;
+		}
+		pbsp++;
+	}
+
+	if (pbsp_highest) {
+		printf("Error: board specific timing not found for data rate %lu MT/s\n"
+			"Trying to use the highest speed (%u) parameters\n",
+			ddr_freq, pbsp_highest->datarate_mhz_high);
+		popts->clk_adjust = pbsp_highest->clk_adjust;
+		popts->wrlvl_start = pbsp_highest->wrlvl_start;
+		popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+		popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+	} else {
+		panic("DIMM is not supported by this board");
+	}
+found:
+	debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n"
+		"\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, wrlvl_ctrl_3 0x%x\n",
+		pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
+		pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
+		pbsp->wrlvl_ctl_3);
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
+	if (ctrl_num == CONFIG_DP_DDR_CTRL) {
+		/* force DDR bus width to 32 bits */
+		popts->data_bus_width = 1;
+		popts->otf_burst_chop_en = 0;
+		popts->burst_length = DDR_BL8;
+		popts->bstopre = 0;	/* enable auto precharge */
+		/*
+		 * Layout optimization results byte mapping
+		 * Byte 0 -> Byte ECC
+		 * Byte 1 -> Byte 3
+		 * Byte 2 -> Byte 2
+		 * Byte 3 -> Byte 1
+		 * Byte ECC -> Byte 0
+		 */
+		dq_mapping_0 = pdimm[slot].dq_mapping[0];
+		dq_mapping_2 = pdimm[slot].dq_mapping[2];
+		dq_mapping_3 = pdimm[slot].dq_mapping[3];
+		pdimm[slot].dq_mapping[0] = pdimm[slot].dq_mapping[8];
+		pdimm[slot].dq_mapping[1] = pdimm[slot].dq_mapping[9];
+		pdimm[slot].dq_mapping[2] = pdimm[slot].dq_mapping[6];
+		pdimm[slot].dq_mapping[3] = pdimm[slot].dq_mapping[7];
+		pdimm[slot].dq_mapping[6] = dq_mapping_2;
+		pdimm[slot].dq_mapping[7] = dq_mapping_3;
+		pdimm[slot].dq_mapping[8] = dq_mapping_0;
+		pdimm[slot].dq_mapping[9] = 0;
+		pdimm[slot].dq_mapping[10] = 0;
+		pdimm[slot].dq_mapping[11] = 0;
+		pdimm[slot].dq_mapping[12] = 0;
+		pdimm[slot].dq_mapping[13] = 0;
+		pdimm[slot].dq_mapping[14] = 0;
+		pdimm[slot].dq_mapping[15] = 0;
+		pdimm[slot].dq_mapping[16] = 0;
+		pdimm[slot].dq_mapping[17] = 0;
+	}
+#endif
+	/* To work at higher than 1333MT/s */
+	popts->half_strength_driver_enable = 0;
+	/*
+	 * Write leveling override
+	 */
+	popts->wrlvl_override = 1;
+	popts->wrlvl_sample = 0x0;	/* 32 clocks */
+
+	/*
+	 * Rtt and Rtt_WR override
+	 */
+	popts->rtt_override = 0;
+
+	/* Enable ZQ calibration */
+	popts->zq_en = 1;
+
+	if (ddr_freq < 2350) {
+		popts->ddr_cdr1 = DDR_CDR1_DHC_EN |
+				  DDR_CDR1_ODT(DDR_CDR_ODT_60ohm);
+		popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) |
+				  DDR_CDR2_VREF_RANGE_2;
+	} else {
+		popts->ddr_cdr1 = DDR_CDR1_DHC_EN |
+				  DDR_CDR1_ODT(DDR_CDR_ODT_100ohm);
+		popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_100ohm) |
+				  DDR_CDR2_VREF_RANGE_2;
+	}
+}
+
+phys_size_t initdram(int board_type)
+{
+	phys_size_t dram_size;
+
+#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
+	return fsl_ddr_sdram_size();
+#else
+	puts("Initializing DDR....using SPD\n");
+
+	dram_size = fsl_ddr_sdram();
+#endif
+
+	return dram_size;
+}
+
+void dram_init_banksize(void)
+{
+#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
+	phys_size_t dp_ddr_size;
+#endif
+
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) {
+		gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
+		gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
+		gd->bd->bi_dram[1].size = gd->ram_size -
+					  CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
+	} else {
+		gd->bd->bi_dram[0].size = gd->ram_size;
+	}
+
+#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
+	/* initialize DP-DDR here */
+	puts("DP-DDR:  ");
+	/*
+	 * DDR controller use 0 as the base address for binding.
+	 * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
+	 */
+	dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
+					  CONFIG_DP_DDR_CTRL,
+					  CONFIG_DP_DDR_NUM_CTRLS,
+					  CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR,
+					  NULL, NULL, NULL);
+	if (dp_ddr_size) {
+		gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
+		gd->bd->bi_dram[2].size = dp_ddr_size;
+	} else {
+		puts("Not detected");
+	}
+#endif
+}
diff --git a/board/freescale/ls2080ardb/ddr.h b/board/freescale/ls2080ardb/ddr.h
new file mode 100644
index 0000000000..bda9d4a40f
--- /dev/null
+++ b/board/freescale/ls2080ardb/ddr.h
@@ -0,0 +1,92 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __DDR_H__
+#define __DDR_H__
+struct board_specific_parameters {
+	u32 n_ranks;
+	u32 datarate_mhz_high;
+	u32 rank_gb;
+	u32 clk_adjust;
+	u32 wrlvl_start;
+	u32 wrlvl_ctl_2;
+	u32 wrlvl_ctl_3;
+};
+
+/*
+ * These tables contain all valid speeds we want to override with board
+ * specific parameters. datarate_mhz_high values need to be in ascending order
+ * for each n_ranks group.
+ */
+
+static const struct board_specific_parameters udimm0[] = {
+	/*
+	 * memory controller 0
+	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
+	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
+	 */
+	{2,  1350, 0, 4,     6, 0x0708090B, 0x0C0D0E09,},
+	{2,  1666, 0, 4,     8, 0x08090B0D, 0x0E10100C,},
+	{2,  1900, 0, 4,     8, 0x090A0C0E, 0x1012120D,},
+	{2,  2300, 0, 4,     9, 0x0A0B0C10, 0x1114140E,},
+	{}
+};
+
+/* DP-DDR DIMM */
+static const struct board_specific_parameters udimm2[] = {
+	/*
+	 * memory controller 2
+	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
+	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
+	 */
+	{2,  1350, 0, 4,   0xd, 0x0C0A0A00, 0x00000009,},
+	{2,  1666, 0, 4,   0xd, 0x0C0A0A00, 0x00000009,},
+	{2,  1900, 0, 4,   0xe, 0x0D0C0B00, 0x0000000A,},
+	{2,  2200, 0, 4,   0xe, 0x0D0C0B00, 0x0000000A,},
+	{}
+};
+
+static const struct board_specific_parameters rdimm0[] = {
+	/*
+	 * memory controller 0
+	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
+	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
+	 */
+	{2,  1350, 0, 4,     6, 0x0708090B, 0x0C0D0E09,},
+	{2,  1666, 0, 4,     7, 0x08090A0C, 0x0D0F100B,},
+	{2,  1900, 0, 4,     7, 0x09090B0D, 0x0E10120B,},
+	{2,  2200, 0, 4,     8, 0x090A0C0F, 0x1012130C,},
+	{}
+};
+
+/* DP-DDR DIMM */
+static const struct board_specific_parameters rdimm2[] = {
+	/*
+	 * memory controller 2
+	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
+	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
+	 */
+	{2,  1350, 0, 4,     6, 0x0708090B, 0x0C0D0E09,},
+	{2,  1666, 0, 4,     7, 0x0B0A090C, 0x0D0F100B,},
+	{2,  1900, 0, 4,     7, 0x09090B0D, 0x0E10120B,},
+	{2,  2200, 0, 4,     8, 0x090A0C0F, 0x1012130C,},
+	{}
+};
+
+static const struct board_specific_parameters *udimms[] = {
+	udimm0,
+	udimm0,
+	udimm2,
+};
+
+static const struct board_specific_parameters *rdimms[] = {
+	rdimm0,
+	rdimm0,
+	rdimm2,
+};
+
+
+#endif
diff --git a/board/freescale/ls2080ardb/eth_ls2080rdb.c b/board/freescale/ls2080ardb/eth_ls2080rdb.c
new file mode 100644
index 0000000000..db50e4efa9
--- /dev/null
+++ b/board/freescale/ls2080ardb/eth_ls2080rdb.c
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <malloc.h>
+#include <fsl_mdio.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/io.h>
+#include <exports.h>
+#include <asm/arch/fsl_serdes.h>
+#include <fsl-mc/ldpaa_wriop.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int load_firmware_cortina(struct phy_device *phy_dev)
+{
+	if (phy_dev->drv->config)
+		return phy_dev->drv->config(phy_dev);
+
+	return 0;
+}
+
+void load_phy_firmware(void)
+{
+	int i;
+	u8 phy_addr;
+	struct phy_device *phy_dev;
+	struct mii_dev *dev;
+	phy_interface_t interface;
+
+	/*Initialize and upload firmware for all the PHYs*/
+	for (i = WRIOP1_DPMAC1; i <= WRIOP1_DPMAC8; i++) {
+		interface = wriop_get_enet_if(i);
+		if (interface == PHY_INTERFACE_MODE_XGMII) {
+			dev = wriop_get_mdio(i);
+			phy_addr = wriop_get_phy_address(i);
+			phy_dev = phy_find_by_mask(dev, 1 << phy_addr,
+						interface);
+			if (!phy_dev) {
+				printf("No phydev for phyaddr %d\n", phy_addr);
+				continue;
+			}
+
+			/*Flash firmware for All CS4340 PHYS */
+			if (phy_dev->phy_id == PHY_UID_CS4340)
+				load_firmware_cortina(phy_dev);
+		}
+	}
+}
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_FSL_MC_ENET)
+	int i, interface;
+	struct memac_mdio_info mdio_info;
+	struct mii_dev *dev;
+	struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 srds_s1;
+	struct memac_mdio_controller *reg;
+
+	srds_s1 = in_le32(&gur->rcwsr[28]) &
+				FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK;
+	srds_s1 >>= FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
+
+	reg = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO1;
+	mdio_info.regs = reg;
+	mdio_info.name = DEFAULT_WRIOP_MDIO1_NAME;
+
+	/* Register the EMI 1 */
+	fm_memac_mdio_init(bis, &mdio_info);
+
+	reg = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO2;
+	mdio_info.regs = reg;
+	mdio_info.name = DEFAULT_WRIOP_MDIO2_NAME;
+
+	/* Register the EMI 2 */
+	fm_memac_mdio_init(bis, &mdio_info);
+
+	switch (srds_s1) {
+	case 0x2A:
+		wriop_set_phy_address(WRIOP1_DPMAC1, CORTINA_PHY_ADDR1);
+		wriop_set_phy_address(WRIOP1_DPMAC2, CORTINA_PHY_ADDR2);
+		wriop_set_phy_address(WRIOP1_DPMAC3, CORTINA_PHY_ADDR3);
+		wriop_set_phy_address(WRIOP1_DPMAC4, CORTINA_PHY_ADDR4);
+		wriop_set_phy_address(WRIOP1_DPMAC5, AQ_PHY_ADDR1);
+		wriop_set_phy_address(WRIOP1_DPMAC6, AQ_PHY_ADDR2);
+		wriop_set_phy_address(WRIOP1_DPMAC7, AQ_PHY_ADDR3);
+		wriop_set_phy_address(WRIOP1_DPMAC8, AQ_PHY_ADDR4);
+
+		break;
+	default:
+		printf("SerDes1 protocol 0x%x is not supported on LS2080aRDB\n",
+		       srds_s1);
+		break;
+	}
+
+	for (i = WRIOP1_DPMAC1; i <= WRIOP1_DPMAC4; i++) {
+		interface = wriop_get_enet_if(i);
+		switch (interface) {
+		case PHY_INTERFACE_MODE_XGMII:
+			dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME);
+			wriop_set_mdio(i, dev);
+			break;
+		default:
+			break;
+		}
+	}
+
+	for (i = WRIOP1_DPMAC5; i <= WRIOP1_DPMAC8; i++) {
+		switch (wriop_get_enet_if(i)) {
+		case PHY_INTERFACE_MODE_XGMII:
+			dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME);
+			wriop_set_mdio(i, dev);
+			break;
+		default:
+			break;
+		}
+	}
+
+	/* Load CORTINA CS4340 PHY firmware */
+	load_phy_firmware();
+
+	cpu_eth_init(bis);
+#endif /* CONFIG_FMAN_ENET */
+
+#ifdef CONFIG_PHY_AQUANTIA
+	/*
+	 * Export functions to be used by AQ firmware
+	 * upload application
+	 */
+	gd->jt->strcpy = strcpy;
+	gd->jt->mdelay = mdelay;
+	gd->jt->mdio_get_current_dev = mdio_get_current_dev;
+	gd->jt->phy_find_by_mask = phy_find_by_mask;
+	gd->jt->mdio_phydev_for_ethname = mdio_phydev_for_ethname;
+	gd->jt->miiphy_set_current_dev = miiphy_set_current_dev;
+#endif
+	return pci_eth_init(bis);
+}
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
new file mode 100644
index 0000000000..2ae9d6cf45
--- /dev/null
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -0,0 +1,321 @@
+/*
+ * Copyright 2015 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <netdev.h>
+#include <fsl_ifc.h>
+#include <fsl_ddr.h>
+#include <asm/io.h>
+#include <hwconfig.h>
+#include <fdt_support.h>
+#include <libfdt.h>
+#include <fsl_debug_server.h>
+#include <fsl-mc/fsl_mc.h>
+#include <environment.h>
+#include <i2c.h>
+#include <asm/arch/soc.h>
+
+#include "../common/qixis.h"
+#include "ls2080ardb_qixis.h"
+
+#define PIN_MUX_SEL_SDHC	0x00
+#define PIN_MUX_SEL_DSPI	0x0a
+
+#define SET_SDHC_MUX_SEL(reg, value)	((reg & 0xf0) | value)
+DECLARE_GLOBAL_DATA_PTR;
+
+enum {
+	MUX_TYPE_SDHC,
+	MUX_TYPE_DSPI,
+};
+
+unsigned long long get_qixis_addr(void)
+{
+	unsigned long long addr;
+
+	if (gd->flags & GD_FLG_RELOC)
+		addr = QIXIS_BASE_PHYS;
+	else
+		addr = QIXIS_BASE_PHYS_EARLY;
+
+	/*
+	 * IFC address under 256MB is mapped to 0x30000000, any address above
+	 * is mapped to 0x5_10000000 up to 4GB.
+	 */
+	addr = addr  > 0x10000000 ? addr + 0x500000000ULL : addr + 0x30000000;
+
+	return addr;
+}
+
+int checkboard(void)
+{
+	u8 sw;
+	char buf[15];
+
+	cpu_name(buf);
+	printf("Board: %s-RDB, ", buf);
+
+	sw = QIXIS_READ(arch);
+	printf("Board Arch: V%d, ", sw >> 4);
+	printf("Board version: %c, boot from ", (sw & 0xf) + 'A');
+
+	sw = QIXIS_READ(brdcfg[0]);
+	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+	if (sw < 0x8)
+		printf("vBank: %d\n", sw);
+	else if (sw == 0x9)
+		puts("NAND\n");
+	else
+		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+
+	printf("FPGA: v%d.%d\n", QIXIS_READ(scver), QIXIS_READ(tagdata));
+
+	puts("SERDES1 Reference : ");
+	printf("Clock1 = 156.25MHz ");
+	printf("Clock2 = 156.25MHz");
+
+	puts("\nSERDES2 Reference : ");
+	printf("Clock1 = 100MHz ");
+	printf("Clock2 = 100MHz\n");
+
+	return 0;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+	u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
+
+	switch (sysclk_conf & 0x0F) {
+	case QIXIS_SYSCLK_83:
+		return 83333333;
+	case QIXIS_SYSCLK_100:
+		return 100000000;
+	case QIXIS_SYSCLK_125:
+		return 125000000;
+	case QIXIS_SYSCLK_133:
+		return 133333333;
+	case QIXIS_SYSCLK_150:
+		return 150000000;
+	case QIXIS_SYSCLK_160:
+		return 160000000;
+	case QIXIS_SYSCLK_166:
+		return 166666666;
+	}
+	return 66666666;
+}
+
+int select_i2c_ch_pca9547(u8 ch)
+{
+	int ret;
+
+	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+	if (ret) {
+		puts("PCA: failed to select proper channel\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+int config_board_mux(int ctrl_type)
+{
+	u8 reg5;
+
+	reg5 = QIXIS_READ(brdcfg[5]);
+
+	switch (ctrl_type) {
+	case MUX_TYPE_SDHC:
+		reg5 = SET_SDHC_MUX_SEL(reg5, PIN_MUX_SEL_SDHC);
+		break;
+	case MUX_TYPE_DSPI:
+		reg5 = SET_SDHC_MUX_SEL(reg5, PIN_MUX_SEL_DSPI);
+		break;
+	default:
+		printf("Wrong mux interface type\n");
+		return -1;
+	}
+
+	QIXIS_WRITE(brdcfg[5], reg5);
+
+	return 0;
+}
+
+int board_init(void)
+{
+	char *env_hwconfig;
+	u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
+	u32 val;
+
+	init_final_memctl_regs();
+
+	val = in_le32(dcfg_ccsr + DCFG_RCWSR13 / 4);
+
+	env_hwconfig = getenv("hwconfig");
+
+	if (hwconfig_f("dspi", env_hwconfig) &&
+	    DCFG_RCWSR13_DSPI == (val & (u32)(0xf << 8)))
+		config_board_mux(MUX_TYPE_DSPI);
+	else
+		config_board_mux(MUX_TYPE_SDHC);
+
+#ifdef CONFIG_ENV_IS_NOWHERE
+	gd->env_addr = (ulong)&default_environment[0];
+#endif
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+
+	QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET_EN);
+
+	return 0;
+}
+
+int board_early_init_f(void)
+{
+	fsl_lsch3_early_init_f();
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	if (hwconfig("sdhc"))
+		config_board_mux(MUX_TYPE_SDHC);
+
+	return 0;
+}
+
+void detail_board_ddr_info(void)
+{
+	puts("\nDDR    ");
+	print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
+	print_ddr_info(0);
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
+	if (gd->bd->bi_dram[2].size) {
+		puts("\nDP-DDR ");
+		print_size(gd->bd->bi_dram[2].size, "");
+		print_ddr_info(CONFIG_DP_DDR_CTRL);
+	}
+#endif
+}
+
+int dram_init(void)
+{
+	gd->ram_size = initdram(0);
+
+	return 0;
+}
+
+#if defined(CONFIG_ARCH_MISC_INIT)
+int arch_misc_init(void)
+{
+#ifdef CONFIG_FSL_DEBUG_SERVER
+	debug_server_init();
+#endif
+
+	return 0;
+}
+#endif
+
+unsigned long get_dram_size_to_hide(void)
+{
+	unsigned long dram_to_hide = 0;
+
+/* Carve the Debug Server private DRAM block from the end of DRAM */
+#ifdef CONFIG_FSL_DEBUG_SERVER
+	dram_to_hide += debug_server_get_dram_block_size();
+#endif
+
+/* Carve the MC private DRAM block from the end of DRAM */
+#ifdef CONFIG_FSL_MC_ENET
+	dram_to_hide += mc_get_dram_block_size();
+#endif
+
+	return roundup(dram_to_hide, CONFIG_SYS_MEM_TOP_HIDE_MIN);
+}
+
+#ifdef CONFIG_FSL_MC_ENET
+void fdt_fixup_board_enet(void *fdt)
+{
+	int offset;
+
+	offset = fdt_path_offset(fdt, "/fsl-mc");
+
+	if (offset < 0)
+		offset = fdt_path_offset(fdt, "/fsl,dprc@0");
+
+	if (offset < 0) {
+		printf("%s: ERROR: fsl-mc node not found in device tree (error %d)\n",
+		       __func__, offset);
+		return;
+	}
+
+	if (get_mc_boot_status() == 0)
+		fdt_status_okay(fdt, offset);
+	else
+		fdt_status_fail(fdt, offset);
+}
+#endif
+
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
+{
+	int err;
+	u64 base[CONFIG_NR_DRAM_BANKS];
+	u64 size[CONFIG_NR_DRAM_BANKS];
+
+	ft_cpu_setup(blob, bd);
+
+	/* fixup DT for the two GPP DDR banks */
+	base[0] = gd->bd->bi_dram[0].start;
+	size[0] = gd->bd->bi_dram[0].size;
+	base[1] = gd->bd->bi_dram[1].start;
+	size[1] = gd->bd->bi_dram[1].size;
+
+	fdt_fixup_memory_banks(blob, base, size, 2);
+
+#ifdef CONFIG_FSL_MC_ENET
+	fdt_fixup_board_enet(blob);
+	err = fsl_mc_ldpaa_exit(bd);
+	if (err)
+		return err;
+#endif
+
+	return 0;
+}
+#endif
+
+void qixis_dump_switch(void)
+{
+	int i, nr_of_cfgsw;
+
+	QIXIS_WRITE(cms[0], 0x00);
+	nr_of_cfgsw = QIXIS_READ(cms[1]);
+
+	puts("DIP switch settings dump:\n");
+	for (i = 1; i <= nr_of_cfgsw; i++) {
+		QIXIS_WRITE(cms[0], i);
+		printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
+	}
+}
+
+/*
+ * Board rev C and earlier has duplicated I2C addresses for 2nd controller.
+ * Both slots has 0x54, resulting 2nd slot unusable.
+ */
+void update_spd_address(unsigned int ctrl_num,
+			unsigned int slot,
+			unsigned int *addr)
+{
+	u8 sw;
+
+	sw = QIXIS_READ(arch);
+	if ((sw & 0xf) < 0x3) {
+		if (ctrl_num == 1 && slot == 0)
+			*addr = SPD_EEPROM_ADDRESS4;
+		else if (ctrl_num == 1 && slot == 1)
+			*addr = SPD_EEPROM_ADDRESS3;
+	}
+}
diff --git a/board/freescale/ls2080ardb/ls2080ardb_qixis.h b/board/freescale/ls2080ardb/ls2080ardb_qixis.h
new file mode 100644
index 0000000000..cb60c00c6c
--- /dev/null
+++ b/board/freescale/ls2080ardb/ls2080ardb_qixis.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __LS2_RDB_QIXIS_H__
+#define __LS2_RDB_QIXIS_H__
+
+/* SYSCLK */
+#define QIXIS_SYSCLK_66			0x0
+#define QIXIS_SYSCLK_83			0x1
+#define QIXIS_SYSCLK_100		0x2
+#define QIXIS_SYSCLK_125		0x3
+#define QIXIS_SYSCLK_133		0x4
+#define QIXIS_SYSCLK_150		0x5
+#define QIXIS_SYSCLK_160		0x6
+#define QIXIS_SYSCLK_166		0x7
+
+#endif /*__LS2_RDB_QIXIS_H__*/