rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

2 files changed, 26 insertions, 26 deletions

diff --git a/board/freescale/mpc8266ads/flash.c b/board/freescale/mpc8266ads/flash.c
index b4cdcd9104..06dde36e61 100644
--- a/board/freescale/mpc8266ads/flash.c
+++ b/board/freescale/mpc8266ads/flash.c
@@ -29,11 +29,11 @@
 #include <common.h>
 
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 #if defined(CONFIG_ENV_IS_IN_FLASH)
 # ifndef  CONFIG_ENV_ADDR
-#  define CONFIG_ENV_ADDR	(CFG_FLASH_BASE + CONFIG_ENV_OFFSET)
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
 # ifndef  CONFIG_ENV_SIZE
 #  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
@@ -56,7 +56,7 @@ static int clear_block_lock_bit(vu_long * addr);
 unsigned long flash_init (void)
 {
 #ifndef CONFIG_MPC8266ADS
-	volatile immap_t	*immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t	*immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t	*memctl = &immap->im_memctl;
 	volatile ip860_bcsr_t	*bcsr   = (ip860_bcsr_t *)BCSR_BASE;
 #endif
@@ -71,7 +71,7 @@ unsigned long flash_init (void)
 #endif
 
 
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 
 		/* set the default sector offset */
@@ -88,20 +88,20 @@ unsigned long flash_init (void)
 
 #ifndef CONFIG_MPC8266ADS
 	/* Remap FLASH according to real size */
-	memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000);
-	memctl->memc_br1 = (CFG_FLASH_BASE & BR_BA_MSK) |
+	memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
+	memctl->memc_br1 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) |
 				(memctl->memc_br1 & ~(BR_BA_MSK));
 #endif
 	/* Re-do sizing to get full correct info */
-	size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 
 	flash_info[0].size = size;
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
@@ -336,7 +336,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 					*addr = 0xFFFFFFFF;	/* reset bank */
 					return 1;
 				}
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = 0xFFFFFFFF;	/* reset bank */
 					return 1;
@@ -461,7 +461,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	start = get_timer (0);
 	flag  = 0;
 	while (((csr = *addr) & 0x80808080) != 0x80808080) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			flag = 1;
 			break;
 		}
@@ -499,7 +499,7 @@ static int clear_block_lock_bit(vu_long  * addr)
 
 	start = get_timer (0);
 	while(*addr != 0x80808080){
-		if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout on clearing Block Lock Bit\n");
 			*addr = 0xFFFFFFFF;	/* reset bank */
 			return 1;
diff --git a/board/freescale/mpc8266ads/mpc8266ads.c b/board/freescale/mpc8266ads/mpc8266ads.c
index 090a534134..66acc41e97 100644
--- a/board/freescale/mpc8266ads/mpc8266ads.c
+++ b/board/freescale/mpc8266ads/mpc8266ads.c
@@ -224,7 +224,7 @@ typedef struct pci_ic_s {
 
 void reset_phy(void)
 {
-    volatile bcsr_t  *bcsr           = (bcsr_t *)CFG_BCSR;
+    volatile bcsr_t  *bcsr           = (bcsr_t *)CONFIG_SYS_BCSR;
 
     /* reset the FEC port */
     bcsr->bcsr1                    &= ~FETH_RST;
@@ -234,8 +234,8 @@ void reset_phy(void)
 
 int board_early_init_f (void)
 {
-    volatile bcsr_t  *bcsr         = (bcsr_t *)CFG_BCSR;
-    volatile pci_ic_t *pci_ic      = (pci_ic_t *) CFG_PCI_INT;
+    volatile bcsr_t  *bcsr         = (bcsr_t *)CONFIG_SYS_BCSR;
+    volatile pci_ic_t *pci_ic      = (pci_ic_t *) CONFIG_SYS_PCI_INT;
 
     bcsr->bcsr1                    = ~FETHIEN & ~RS232EN_1 & ~RS232EN_2;
 
@@ -254,17 +254,17 @@ int checkboard(void)
 phys_size_t initdram(int board_type)
 {
 	/* Autoinit part stolen from board/sacsng/sacsng.c */
-    volatile immap_t *immap         = (immap_t *)CFG_IMMR;
+    volatile immap_t *immap         = (immap_t *)CONFIG_SYS_IMMR;
     volatile memctl8260_t *memctl   = &immap->im_memctl;
     volatile uchar c = 0xff;
-    volatile uchar *ramaddr = (uchar *)(CFG_SDRAM_BASE + 0x8);
-    uint  psdmr = CFG_PSDMR;
+    volatile uchar *ramaddr = (uchar *)(CONFIG_SYS_SDRAM_BASE + 0x8);
+    uint  psdmr = CONFIG_SYS_PSDMR;
     int i;
 
     uint   psrt = 0x21;					/* for no SPD */
     uint   chipselects = 1;				/* for no SPD */
-    uint   sdram_size = CFG_SDRAM_SIZE * 1024 * 1024;	/* for no SPD */
-    uint   or = CFG_OR2_PRELIM;				/* for no SPD */
+    uint   sdram_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;	/* for no SPD */
+    uint   or = CONFIG_SYS_OR2_PRELIM;				/* for no SPD */
     uint   data_width;
     uint   rows;
     uint   banks;
@@ -286,7 +286,7 @@ phys_size_t initdram(int board_type)
     /*
      * Read the SDRAM SPD EEPROM via I2C.
      */
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
     i2c_read(SDRAM_SPD_ADDR, 0, 1, &data, 1);
     spd_size = data;
@@ -506,13 +506,13 @@ phys_size_t initdram(int board_type)
      *  accessing the SDRAM with a single-byte transaction."
      *
      * The appropriate BRx/ORx registers have already been set when we
-     * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+     * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
      */
 
-    memctl->memc_mptpr = CFG_MPTPR;
+    memctl->memc_mptpr = CONFIG_SYS_MPTPR;
     memctl->memc_psrt  = psrt;
 
-    memctl->memc_br2 = CFG_BR2_PRELIM;
+    memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
     memctl->memc_or2 = or;
 
     memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
@@ -536,7 +536,7 @@ phys_size_t initdram(int board_type)
 	{
 	ramaddr += sdram_size;
 
-		memctl->memc_br3 = CFG_BR3_PRELIM + sdram_size;
+		memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM + sdram_size;
 		memctl->memc_or3 = or;
 
 		memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;