diff options
| author | Peng Fan <van.freenix@gmail.com> | 2016-08-11 14:02:57 +0800 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2016-10-04 15:42:07 +0200 |
| commit | 55a42b33f2e9b9f6330396fc6d89878a5deacc75 (patch) | |
| tree | f8b19af10430aa540d4df75ceabbbd0e2365e281 /board/freescale/mx6ullevk/Makefile | |
| parent | 35ae99467dbe9f5674b5cd6fbc9951c0aa8c8269 (diff) | |
arm: imx: add i.MX6ULL 14x14 EVK board support
Add i.MX6ULL EVK board support:
Add device tree file, which is copied from NXP Linux.
Enabled DM_MMC, DM_GPIO, DM_I2C, DM_SPI, PINCTRL, DM_REGULATOR.
The uart iomux settings are still keeped in board file.
Boot Log:
U-Boot 2016.09-rc1-00366-gbb419ef-dirty (Aug 11 2016 - 13:08:58 +0800)
CPU: Freescale i.MX6ULL rev1.0 at 396MHz
CPU: Commercial temperature grade (0C to 95C) at 15C
Reset cause: POR
Model: Freescale i.MX6 ULL 14x14 EVK Board
Board: MX6ULL 14x14 EVK
DRAM: 512 MiB
MMC: initialized IMX pinctrl driver
FSL_SDHC: 0, FSL_SDHC: 1
In: serial
Out: serial
Err: serial
Net: CPU Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot: 0
=> mmc dev 1
switch to partitions #0, OK
mmc1 is current device
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'board/freescale/mx6ullevk/Makefile')
| -rw-r--r-- | board/freescale/mx6ullevk/Makefile | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/board/freescale/mx6ullevk/Makefile b/board/freescale/mx6ullevk/Makefile new file mode 100644 index 0000000000..c64fba407e --- /dev/null +++ b/board/freescale/mx6ullevk/Makefile @@ -0,0 +1,6 @@ +# (C) Copyright 2016 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := mx6ullevk.o |