diff options
| author | Stefano Babic <sbabic@denx.de> | 2014-05-15 10:27:32 +0200 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2014-05-15 10:27:32 +0200 |
| commit | e7f9350525d73233d4eaf1793f8fe618e9fd4910 (patch) | |
| tree | 153366c61e17af4ecdd9f10be520f707d525157d /board/freescale/t1040qds/t1040qds.c | |
| parent | 50c8d66d33651d7fca6a082a1eea6e537401a2f4 (diff) | |
| parent | d2a3e911390f9fc4d8c0ee4b3c7fc75f4fd3fd19 (diff) | |
Merge branch 'master' of git://git.denx.de/u-boot-arm
Diffstat (limited to 'board/freescale/t1040qds/t1040qds.c')
| -rw-r--r-- | board/freescale/t1040qds/t1040qds.c | 39 |
1 files changed, 39 insertions, 0 deletions
diff --git a/board/freescale/t1040qds/t1040qds.c b/board/freescale/t1040qds/t1040qds.c index 3dec4473e5..0e83d172da 100644 --- a/board/freescale/t1040qds/t1040qds.c +++ b/board/freescale/t1040qds/t1040qds.c @@ -18,6 +18,8 @@ #include <asm/fsl_portals.h> #include <asm/fsl_liodn.h> #include <fm_eth.h> +#include <hwconfig.h> +#include <asm/mpc85xx_gpio.h> #include "../common/qixis.h" #include "t1040qds.h" @@ -89,6 +91,30 @@ int select_i2c_ch_pca9547(u8 ch) return 0; } +static void qe_board_setup(void) +{ + u8 brdcfg15, brdcfg9; + + if (hwconfig("qe") && hwconfig("tdm")) { + brdcfg15 = QIXIS_READ(brdcfg[15]); + /* + * TDMRiser uses QE-TDM + * Route QE_TDM signals to TDM Riser slot + */ + QIXIS_WRITE(brdcfg[15], brdcfg15 | 7); + } else if (hwconfig("qe") && hwconfig("uart")) { + brdcfg15 = QIXIS_READ(brdcfg[15]); + brdcfg9 = QIXIS_READ(brdcfg[9]); + /* + * Route QE_TDM signals to UCC + * ProfiBus controlled by UCC3 + */ + brdcfg15 &= 0xfc; + QIXIS_WRITE(brdcfg[15], brdcfg15 | 2); + QIXIS_WRITE(brdcfg[9], brdcfg9 | 4); + } +} + int board_early_init_r(void) { #ifdef CONFIG_SYS_FLASH_BASE @@ -196,6 +222,8 @@ int misc_init_r(void) } } + qe_board_setup(); + return 0; } @@ -245,3 +273,14 @@ int board_need_mem_reset(void) { return 1; } + +#ifdef CONFIG_DEEP_SLEEP +void board_mem_sleep_setup(void) +{ + /* does not provide HW signals for power management */ + QIXIS_WRITE(pwr_ctl[1], (QIXIS_READ(pwr_ctl[1]) & ~0x2)); + /* Disable MCKE isolation */ + gpio_set_value(2, 0); + udelay(1); +} +#endif |