Merge branch 'master' of git://git.denx.de/u-boot-arm

13 files changed, 1634 insertions, 0 deletions

diff --git a/board/freescale/t208xqds/Makefile b/board/freescale/t208xqds/Makefile
new file mode 100644
index 0000000000..947b7f7324
--- /dev/null
+++ b/board/freescale/t208xqds/Makefile
@@ -0,0 +1,14 @@
+#
+# Copyright 2013 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-$(CONFIG_T2080QDS) += t208xqds.o
+obj-$(CONFIG_T2080QDS) += eth_t208xqds.o
+obj-$(CONFIG_T2081QDS) += t208xqds.o
+obj-$(CONFIG_T2081QDS) += eth_t208xqds.o
+obj-$(CONFIG_PCI)      += pci.o
+obj-y   += ddr.o
+obj-y   += law.o
+obj-y   += tlb.o
diff --git a/board/freescale/t208xqds/ddr.c b/board/freescale/t208xqds/ddr.c
new file mode 100644
index 0000000000..ed1334d985
--- /dev/null
+++ b/board/freescale/t208xqds/ddr.c
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 or later as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <hwconfig.h>
+#include <asm/mmu.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
+#include <asm/fsl_law.h>
+#include "ddr.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
+{
+	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
+	ulong ddr_freq;
+
+	if (ctrl_num > 1) {
+		printf("Not supported controller number %d\n", ctrl_num);
+		return;
+	}
+	if (!pdimm->n_ranks)
+		return;
+
+	/*
+	 * we use identical timing for all slots. If needed, change the code
+	 * to  pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num];
+	 */
+	if (popts->registered_dimm_en)
+		pbsp = rdimms[0];
+	else
+		pbsp = udimms[0];
+
+	/* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr
+	 * freqency and n_banks specified in board_specific_parameters table.
+	 */
+	ddr_freq = get_ddr_freq(0) / 1000000;
+	while (pbsp->datarate_mhz_high) {
+		if (pbsp->n_ranks == pdimm->n_ranks &&
+		    (pdimm->rank_density >> 30) >= pbsp->rank_gb) {
+			if (ddr_freq <= pbsp->datarate_mhz_high) {
+				popts->clk_adjust = pbsp->clk_adjust;
+				popts->wrlvl_start = pbsp->wrlvl_start;
+				popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+				popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+				goto found;
+			}
+			pbsp_highest = pbsp;
+		}
+		pbsp++;
+	}
+
+	if (pbsp_highest) {
+		printf("Error: board specific timing not found");
+		printf("for data rate %lu MT/s\n", ddr_freq);
+		printf("Trying to use the highest speed (%u) parameters\n",
+		       pbsp_highest->datarate_mhz_high);
+		popts->clk_adjust = pbsp_highest->clk_adjust;
+		popts->wrlvl_start = pbsp_highest->wrlvl_start;
+		popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+		popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+	} else {
+		panic("DIMM is not supported by this board");
+	}
+found:
+	debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n"
+		"\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, "
+		"wrlvl_ctrl_3 0x%x\n",
+		pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
+		pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
+		pbsp->wrlvl_ctl_3);
+
+	/*
+	 * Factors to consider for half-strength driver enable:
+	 *	- number of DIMMs installed
+	 */
+	popts->half_strength_driver_enable = 0;
+	/*
+	 * Write leveling override
+	 */
+	popts->wrlvl_override = 1;
+	popts->wrlvl_sample = 0xf;
+
+	/*
+	 * Rtt and Rtt_WR override
+	 */
+	popts->rtt_override = 0;
+
+	/* Enable ZQ calibration */
+	popts->zq_en = 1;
+
+	/* DHC_EN =1, ODT = 75 Ohm */
+	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
+	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
+}
+
+phys_size_t initdram(int board_type)
+{
+	phys_size_t dram_size;
+
+	puts("Initializing....using SPD\n");
+
+	dram_size = fsl_ddr_sdram();
+
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
+
+	puts("    DDR: ");
+	return dram_size;
+}
diff --git a/board/freescale/t208xqds/ddr.h b/board/freescale/t208xqds/ddr.h
new file mode 100644
index 0000000000..9fc879a4ef
--- /dev/null
+++ b/board/freescale/t208xqds/ddr.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef __DDR_H__
+#define __DDR_H__
+struct board_specific_parameters {
+	u32 n_ranks;
+	u32 datarate_mhz_high;
+	u32 rank_gb;
+	u32 clk_adjust;
+	u32 wrlvl_start;
+	u32 wrlvl_ctl_2;
+	u32 wrlvl_ctl_3;
+};
+
+/*
+ * These tables contain all valid speeds we want to override with board
+ * specific parameters. datarate_mhz_high values need to be in ascending order
+ * for each n_ranks group.
+ */
+
+static const struct board_specific_parameters udimm0[] = {
+	/*
+	 * memory controller 0
+	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl |
+	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |
+	 */
+	{2,  1200, 2, 5,     7, 0x0808090a, 0x0b0c0c0a},
+	{2,  1500, 2, 5,     6, 0x07070809, 0x0a0b0b09},
+	{2,  1600, 2, 5,     8, 0x090b0b0d, 0x0d0e0f0b},
+	{2,  1700, 2, 4,     7, 0x080a0a0c, 0x0c0d0e0a},
+	{2,  1900, 2, 5,     9, 0x0a0b0c0e, 0x0f10120c},
+	{2,  2140, 2, 4,     8, 0x090a0b0d, 0x0e0f110b},
+	{1,  1200, 2, 5,     7, 0x0808090a, 0x0b0c0c0a},
+	{1,  1500, 2, 5,     6, 0x07070809, 0x0a0b0b09},
+	{1,  1600, 2, 5,     8, 0x090b0b0d, 0x0d0e0f0b},
+	{1,  1700, 2, 4,     7, 0x080a0a0c, 0x0c0d0e0a},
+	{1,  1900, 2, 5,     9, 0x0a0b0c0e, 0x0f10120c},
+	{1,  2140, 2, 4,     8, 0x090a0b0d, 0x0e0f110b},
+	{}
+};
+
+static const struct board_specific_parameters rdimm0[] = {
+	/*
+	 * memory controller 0
+	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl |
+	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |
+	 */
+	/* TODO: need tuning these parameters if RDIMM is used */
+	{4,  1350, 0, 5,     9, 0x08070605, 0x06070806},
+	{4,  1666, 0, 5,    11, 0x0a080706, 0x07090906},
+	{4,  2140, 0, 5,    12, 0x0b090807, 0x080a0b07},
+	{2,  1350, 0, 5,     9, 0x08070605, 0x06070806},
+	{2,  1666, 0, 5,    11, 0x0a090806, 0x08090a06},
+	{2,  2140, 0, 5,    12, 0x0b090807, 0x080a0b07},
+	{1,  1350, 0, 5,     9, 0x08070605, 0x06070806},
+	{1,  1666, 0, 5,    11, 0x0a090806, 0x08090a06},
+	{1,  2140, 0, 4,    12, 0x0b090807, 0x080a0b07},
+	{}
+};
+
+static const struct board_specific_parameters *udimms[] = {
+	udimm0,
+};
+
+static const struct board_specific_parameters *rdimms[] = {
+	rdimm0,
+};
+#endif
diff --git a/board/freescale/t208xqds/eth_t208xqds.c b/board/freescale/t208xqds/eth_t208xqds.c
new file mode 100644
index 0000000000..7d8411bef7
--- /dev/null
+++ b/board/freescale/t208xqds/eth_t208xqds.c
@@ -0,0 +1,648 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Shengzhou Liu <Shengzhou.Liu@freescale.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <malloc.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <asm/fsl_dtsec.h>
+#include <asm/fsl_serdes.h>
+#include "../common/qixis.h"
+#include "../common/fman.h"
+#include "t208xqds_qixis.h"
+
+#define EMI_NONE	0xFFFFFFFF
+#define EMI1_RGMII1	0
+#define EMI1_RGMII2     1
+#define EMI1_SLOT1	2
+#if defined(CONFIG_T2080QDS)
+#define EMI1_SLOT2	6
+#define EMI1_SLOT3	3
+#define EMI1_SLOT4	4
+#define EMI1_SLOT5	5
+#elif defined(CONFIG_T2081QDS)
+#define EMI1_SLOT2      3
+#define EMI1_SLOT3      4
+#define EMI1_SLOT5      5
+#define EMI1_SLOT6      6
+#define EMI1_SLOT7      7
+#endif
+#define EMI2		8
+
+static int mdio_mux[NUM_FM_PORTS];
+
+static const char * const mdio_names[] = {
+#if defined(CONFIG_T2080QDS)
+	"T2080QDS_MDIO_RGMII1",
+	"T2080QDS_MDIO_RGMII2",
+	"T2080QDS_MDIO_SLOT1",
+	"T2080QDS_MDIO_SLOT3",
+	"T2080QDS_MDIO_SLOT4",
+	"T2080QDS_MDIO_SLOT5",
+	"T2080QDS_MDIO_SLOT2",
+	"T2080QDS_MDIO_10GC",
+#elif defined(CONFIG_T2081QDS)
+	"T2081QDS_MDIO_RGMII1",
+	"T2081QDS_MDIO_RGMII2",
+	"T2081QDS_MDIO_SLOT1",
+	"T2081QDS_MDIO_SLOT2",
+	"T2081QDS_MDIO_SLOT3",
+	"T2081QDS_MDIO_SLOT5",
+	"T2081QDS_MDIO_SLOT6",
+	"T2081QDS_MDIO_SLOT7",
+	"T2081QDS_MDIO_10GC",
+#endif
+};
+
+/* Map SerDes1 8 lanes to default slot, will be initialized dynamically */
+#if defined(CONFIG_T2080QDS)
+static u8 lane_to_slot[] = {3, 3, 3, 3, 1, 1, 1, 1};
+#elif defined(CONFIG_T2081QDS)
+static u8 lane_to_slot[] = {2, 2, 2, 2, 1, 1, 1, 1};
+#endif
+
+static const char *t208xqds_mdio_name_for_muxval(u8 muxval)
+{
+	return mdio_names[muxval];
+}
+
+struct mii_dev *mii_dev_for_muxval(u8 muxval)
+{
+	struct mii_dev *bus;
+	const char *name = t208xqds_mdio_name_for_muxval(muxval);
+
+	if (!name) {
+		printf("No bus for muxval %x\n", muxval);
+		return NULL;
+	}
+
+	bus = miiphy_get_dev_by_name(name);
+
+	if (!bus) {
+		printf("No bus by name %s\n", name);
+		return NULL;
+	}
+
+	return bus;
+}
+
+struct t208xqds_mdio {
+	u8 muxval;
+	struct mii_dev *realbus;
+};
+
+static void t208xqds_mux_mdio(u8 muxval)
+{
+	u8 brdcfg4;
+	if (muxval < 8) {
+		brdcfg4 = QIXIS_READ(brdcfg[4]);
+		brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
+		brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
+		QIXIS_WRITE(brdcfg[4], brdcfg4);
+	}
+}
+
+static int t208xqds_mdio_read(struct mii_dev *bus, int addr, int devad,
+				int regnum)
+{
+	struct t208xqds_mdio *priv = bus->priv;
+
+	t208xqds_mux_mdio(priv->muxval);
+
+	return priv->realbus->read(priv->realbus, addr, devad, regnum);
+}
+
+static int t208xqds_mdio_write(struct mii_dev *bus, int addr, int devad,
+				int regnum, u16 value)
+{
+	struct t208xqds_mdio *priv = bus->priv;
+
+	t208xqds_mux_mdio(priv->muxval);
+
+	return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
+}
+
+static int t208xqds_mdio_reset(struct mii_dev *bus)
+{
+	struct t208xqds_mdio *priv = bus->priv;
+
+	return priv->realbus->reset(priv->realbus);
+}
+
+static int t208xqds_mdio_init(char *realbusname, u8 muxval)
+{
+	struct t208xqds_mdio *pmdio;
+	struct mii_dev *bus = mdio_alloc();
+
+	if (!bus) {
+		printf("Failed to allocate t208xqds MDIO bus\n");
+		return -1;
+	}
+
+	pmdio = malloc(sizeof(*pmdio));
+	if (!pmdio) {
+		printf("Failed to allocate t208xqds private data\n");
+		free(bus);
+		return -1;
+	}
+
+	bus->read = t208xqds_mdio_read;
+	bus->write = t208xqds_mdio_write;
+	bus->reset = t208xqds_mdio_reset;
+	sprintf(bus->name, t208xqds_mdio_name_for_muxval(muxval));
+
+	pmdio->realbus = miiphy_get_dev_by_name(realbusname);
+
+	if (!pmdio->realbus) {
+		printf("No bus with name %s\n", realbusname);
+		free(bus);
+		free(pmdio);
+		return -1;
+	}
+
+	pmdio->muxval = muxval;
+	bus->priv = pmdio;
+	return mdio_register(bus);
+}
+
+void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
+				enum fm_port port, int offset)
+{
+	int phy;
+	char alias[20];
+	struct fixed_link f_link;
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 srds_s1 = in_be32(&gur->rcwsr[4]) &
+				FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+
+	srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+	if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
+		phy = fm_info_get_phy_address(port);
+		switch (port) {
+#if defined(CONFIG_T2080QDS)
+		case FM1_DTSEC1:
+		case FM1_DTSEC2:
+		case FM1_DTSEC9:
+		case FM1_DTSEC10:
+			if (mdio_mux[port] == EMI1_SLOT2) {
+				sprintf(alias, "phy_sgmii_s2_%x", phy);
+				fdt_set_phy_handle(fdt, compat, addr, alias);
+				fdt_status_okay_by_alias(fdt, "emi1_slot2");
+			} else if (mdio_mux[port] == EMI1_SLOT3) {
+				sprintf(alias, "phy_sgmii_s3_%x", phy);
+				fdt_set_phy_handle(fdt, compat, addr, alias);
+				fdt_status_okay_by_alias(fdt, "emi1_slot3");
+			}
+			break;
+		case FM1_DTSEC5:
+		case FM1_DTSEC6:
+			if (mdio_mux[port] == EMI1_SLOT1) {
+				sprintf(alias, "phy_sgmii_s1_%x", phy);
+				fdt_set_phy_handle(fdt, compat, addr, alias);
+				fdt_status_okay_by_alias(fdt, "emi1_slot1");
+			} else if (mdio_mux[port] == EMI1_SLOT2) {
+				sprintf(alias, "phy_sgmii_s2_%x", phy);
+				fdt_set_phy_handle(fdt, compat, addr, alias);
+				fdt_status_okay_by_alias(fdt, "emi1_slot2");
+			}
+			break;
+#elif defined(CONFIG_T2081QDS)
+		case FM1_DTSEC1:
+		case FM1_DTSEC2:
+		case FM1_DTSEC5:
+		case FM1_DTSEC6:
+		case FM1_DTSEC9:
+		case FM1_DTSEC10:
+			if (mdio_mux[port] == EMI1_SLOT2) {
+				sprintf(alias, "phy_sgmii_s2_%x", phy);
+				fdt_set_phy_handle(fdt, compat, addr, alias);
+				fdt_status_okay_by_alias(fdt, "emi1_slot2");
+			} else if (mdio_mux[port] == EMI1_SLOT3) {
+				sprintf(alias, "phy_sgmii_s3_%x", phy);
+				fdt_set_phy_handle(fdt, compat, addr, alias);
+				fdt_status_okay_by_alias(fdt, "emi1_slot3");
+			} else if (mdio_mux[port] == EMI1_SLOT5) {
+				sprintf(alias, "phy_sgmii_s5_%x", phy);
+				fdt_set_phy_handle(fdt, compat, addr, alias);
+				fdt_status_okay_by_alias(fdt, "emi1_slot5");
+			} else if (mdio_mux[port] == EMI1_SLOT6) {
+				sprintf(alias, "phy_sgmii_s6_%x", phy);
+				fdt_set_phy_handle(fdt, compat, addr, alias);
+				fdt_status_okay_by_alias(fdt, "emi1_slot6");
+			} else if (mdio_mux[port] == EMI1_SLOT7) {
+				sprintf(alias, "phy_sgmii_s7_%x", phy);
+				fdt_set_phy_handle(fdt, compat, addr, alias);
+				fdt_status_okay_by_alias(fdt, "emi1_slot7");
+			}
+			break;
+#endif
+		default:
+			break;
+		}
+
+	} else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_XGMII) {
+		switch (srds_s1) {
+		case 0x66: /* XFI interface */
+		case 0x6b:
+		case 0x6c:
+		case 0x6d:
+		case 0x71:
+			f_link.phy_id = port;
+			f_link.duplex = 1;
+			f_link.link_speed = 10000;
+			f_link.pause = 0;
+			f_link.asym_pause = 0;
+			/* no PHY for XFI */
+			fdt_delprop(fdt, offset, "phy-handle");
+			fdt_setprop(fdt, offset, "fixed-link", &f_link,
+				    sizeof(f_link));
+			break;
+		default:
+			break;
+		}
+	}
+}
+
+void fdt_fixup_board_enet(void *fdt)
+{
+	return;
+}
+
+/*
+ * This function reads RCW to check if Serdes1{A:H} is configured
+ * to slot 1/2/3/4/5/6/7 and update the lane_to_slot[] array accordingly
+ */
+static void initialize_lane_to_slot(void)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 srds_s1 = in_be32(&gur->rcwsr[4]) &
+				FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+
+	srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+	switch (srds_s1) {
+#if defined(CONFIG_T2080QDS)
+	case 0x51:
+	case 0x5f:
+	case 0x65:
+	case 0x6b:
+	case 0x71:
+		lane_to_slot[5] = 2;
+		lane_to_slot[6] = 2;
+		lane_to_slot[7] = 2;
+		break;
+	case 0xa6:
+	case 0x8e:
+	case 0x8f:
+	case 0x82:
+	case 0x83:
+	case 0xd3:
+	case 0xd9:
+	case 0xcb:
+		lane_to_slot[6] = 2;
+		lane_to_slot[7] = 2;
+		break;
+	case 0xda:
+		lane_to_slot[4] = 3;
+		lane_to_slot[5] = 3;
+		lane_to_slot[6] = 3;
+		lane_to_slot[7] = 3;
+		break;
+#elif defined(CONFIG_T2081QDS)
+	case 0x6b:
+		lane_to_slot[4] = 1;
+		lane_to_slot[5] = 3;
+		lane_to_slot[6] = 3;
+		lane_to_slot[7] = 3;
+		break;
+	case 0xca:
+	case 0xcb:
+		lane_to_slot[1] = 7;
+		lane_to_slot[2] = 6;
+		lane_to_slot[3] = 5;
+		lane_to_slot[5] = 3;
+		lane_to_slot[6] = 3;
+		lane_to_slot[7] = 3;
+		break;
+	case 0xf2:
+		lane_to_slot[1] = 7;
+		lane_to_slot[2] = 7;
+		lane_to_slot[3] = 7;
+		lane_to_slot[5] = 4;
+		lane_to_slot[6] = 3;
+		lane_to_slot[7] = 7;
+		break;
+#endif
+	default:
+		break;
+	}
+}
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_FMAN_ENET)
+	int i, idx, lane, slot, interface;
+	struct memac_mdio_info dtsec_mdio_info;
+	struct memac_mdio_info tgec_mdio_info;
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 rcwsr13 = in_be32(&gur->rcwsr[13]);
+	u32 srds_s1;
+
+	srds_s1 = in_be32(&gur->rcwsr[4]) &
+					FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+	srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+	initialize_lane_to_slot();
+
+	/* Initialize the mdio_mux array so we can recognize empty elements */
+	for (i = 0; i < NUM_FM_PORTS; i++)
+		mdio_mux[i] = EMI_NONE;
+
+	dtsec_mdio_info.regs =
+		(struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
+
+	dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+	/* Register the 1G MDIO bus */
+	fm_memac_mdio_init(bis, &dtsec_mdio_info);
+
+	tgec_mdio_info.regs =
+		(struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
+	tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
+
+	/* Register the 10G MDIO bus */
+	fm_memac_mdio_init(bis, &tgec_mdio_info);
+
+	/* Register the muxing front-ends to the MDIO buses */
+	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1);
+	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII2);
+	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1);
+	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2);
+	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
+#if defined(CONFIG_T2080QDS)
+	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
+#endif
+	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5);
+#if defined(CONFIG_T2081QDS)
+	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT6);
+	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7);
+#endif
+	t208xqds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2);
+
+	/* Set the two on-board RGMII PHY address */
+	fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR);
+	if ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) ==
+			FSL_CORENET_RCWSR13_EC2_DTSEC4_RGMII)
+		fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY2_ADDR);
+	else
+		fm_info_set_phy_address(FM1_DTSEC10, RGMII_PHY2_ADDR);
+
+	switch (srds_s1) {
+	case 0x1c:
+	case 0x95:
+	case 0xa2:
+	case 0x94:
+		/* T2080QDS: SGMII in Slot3;  T2081QDS: SGMII in Slot2 */
+		fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
+		/* T2080QDS: SGMII in Slot2;  T2081QDS: SGMII in Slot1 */
+		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR);
+		break;
+	case 0x51:
+	case 0x5f:
+	case 0x65:
+		/* T2080QDS: XAUI/HiGig in Slot3;  T2081QDS: in Slot2 */
+		fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
+		/* T2080QDS: SGMII in Slot2;  T2081QDS: in Slot3 */
+		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR);
+		break;
+	case 0x66:
+		/*
+		 * XFI does not need a PHY to work, but to avoid U-boot use
+		 * default PHY address which is zero to a MAC when it found
+		 * a MAC has no PHY address, we give a PHY address to XFI
+		 * MAC, and should not use a real XAUI PHY address, since
+		 * MDIO can access it successfully, and then MDIO thinks
+		 * the XAUI card is used for the XFI MAC, which will cause
+		 * error.
+		 */
+		fm_info_set_phy_address(FM1_10GEC1, 4);
+		fm_info_set_phy_address(FM1_10GEC2, 5);
+		fm_info_set_phy_address(FM1_10GEC3, 6);
+		fm_info_set_phy_address(FM1_10GEC4, 7);
+		break;
+	case 0x6b:
+		fm_info_set_phy_address(FM1_10GEC1, 4);
+		fm_info_set_phy_address(FM1_10GEC2, 5);
+		fm_info_set_phy_address(FM1_10GEC3, 6);
+		fm_info_set_phy_address(FM1_10GEC4, 7);
+		/* T2080QDS: SGMII in Slot2;  T2081QDS: in Slot3 */
+		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+		break;
+	case 0x6c:
+	case 0x6d:
+		fm_info_set_phy_address(FM1_10GEC1, 4);
+		fm_info_set_phy_address(FM1_10GEC2, 5);
+		/* T2080QDS: SGMII in Slot3;  T2081QDS: in Slot2 */
+		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
+		break;
+	case 0x71:
+		/* SGMII in Slot3 */
+		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
+		/* SGMII in Slot2 */
+		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+		break;
+	case 0xa6:
+	case 0x8e:
+	case 0x8f:
+	case 0x82:
+	case 0x83:
+		/* SGMII in Slot3 */
+		fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
+		/* SGMII in Slot2 */
+		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+		break;
+	case 0xa4:
+	case 0x96:
+	case 0x8a:
+		/* SGMII in Slot3 */
+		fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
+		break;
+#if defined(CONFIG_T2080QDS)
+	case 0xd9:
+	case 0xd3:
+	case 0xcb:
+		/* SGMII in Slot3 */
+		fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
+		/* SGMII in Slot2 */
+		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+		break;
+#elif defined(CONFIG_T2081QDS)
+	case 0xca:
+	case 0xcb:
+		/* SGMII in Slot3 */
+		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+		/* SGMII in Slot5 */
+		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT1_PHY_ADDR);
+		/* SGMII in Slot6 */
+		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
+		/* SGMII in Slot7 */
+		fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR);
+		break;
+#endif
+	case 0xf2:
+		/* T2080QDS: SGMII in Slot3; T2081QDS: SGMII in Slot7 */
+		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR);
+		break;
+	default:
+		break;
+	}
+
+	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+		idx = i - FM1_DTSEC1;
+		interface = fm_info_get_enet_if(i);
+		switch (interface) {
+		case PHY_INTERFACE_MODE_SGMII:
+			lane = serdes_get_first_lane(FSL_SRDS_1,
+					SGMII_FM1_DTSEC1 + idx);
+			if (lane < 0)
+				break;
+			slot = lane_to_slot[lane];
+			debug("FM1@DTSEC%u expects SGMII in slot %u\n",
+			      idx + 1, slot);
+			if (QIXIS_READ(present2) & (1 << (slot - 1)))
+				fm_disable_port(i);
+
+			switch (slot) {
+			case 1:
+				mdio_mux[i] = EMI1_SLOT1;
+				fm_info_set_mdio(i, mii_dev_for_muxval(
+						 mdio_mux[i]));
+				break;
+			case 2:
+				mdio_mux[i] = EMI1_SLOT2;
+				fm_info_set_mdio(i, mii_dev_for_muxval(
+						 mdio_mux[i]));
+				break;
+			case 3:
+				mdio_mux[i] = EMI1_SLOT3;
+				fm_info_set_mdio(i, mii_dev_for_muxval(
+						 mdio_mux[i]));
+				break;
+#if defined(CONFIG_T2081QDS)
+			case 5:
+				mdio_mux[i] = EMI1_SLOT5;
+				fm_info_set_mdio(i, mii_dev_for_muxval(
+						 mdio_mux[i]));
+				break;
+			case 6:
+				mdio_mux[i] = EMI1_SLOT6;
+				fm_info_set_mdio(i, mii_dev_for_muxval(
+						 mdio_mux[i]));
+				break;
+			case 7:
+				mdio_mux[i] = EMI1_SLOT7;
+				fm_info_set_mdio(i, mii_dev_for_muxval(
+						 mdio_mux[i]));
+				break;
+#endif
+			}
+			break;
+		case PHY_INTERFACE_MODE_RGMII:
+			if (i == FM1_DTSEC3)
+				mdio_mux[i] = EMI1_RGMII1;
+			else if (i == FM1_DTSEC4 || FM1_DTSEC10)
+				mdio_mux[i] = EMI1_RGMII2;
+			fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+			break;
+		default:
+			break;
+		}
+	}
+
+	for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
+		idx = i - FM1_10GEC1;
+		switch (fm_info_get_enet_if(i)) {
+		case PHY_INTERFACE_MODE_XGMII:
+			if (srds_s1 == 0x51) {
+				lane = serdes_get_first_lane(FSL_SRDS_1,
+						XAUI_FM1_MAC9 + idx);
+			} else if ((srds_s1 == 0x5f) || (srds_s1 == 0x65)) {
+				lane = serdes_get_first_lane(FSL_SRDS_1,
+						HIGIG_FM1_MAC9 + idx);
+			} else {
+				if (i == FM1_10GEC1 || i == FM1_10GEC2)
+					lane = serdes_get_first_lane(FSL_SRDS_1,
+						XFI_FM1_MAC9 + idx);
+				else
+					lane = serdes_get_first_lane(FSL_SRDS_1,
+						XFI_FM1_MAC1 + idx);
+			}
+
+			if (lane < 0)
+				break;
+			mdio_mux[i] = EMI2;
+			fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+
+			if ((srds_s1 == 0x66) || (srds_s1 == 0x6b) ||
+			    (srds_s1 == 0x6c) || (srds_s1 == 0x6d) ||
+			    (srds_s1 == 0x71)) {
+				/* As XFI is in cage intead of a slot, so
+				 * ensure doesn't disable the corresponding port
+				 */
+				break;
+			}
+
+			slot = lane_to_slot[lane];
+			if (QIXIS_READ(present2) & (1 << (slot - 1)))
+				fm_disable_port(i);
+			break;
+		default:
+			break;
+		}
+	}
+
+	cpu_eth_init(bis);
+#endif /* CONFIG_FMAN_ENET */
+
+	return pci_eth_init(bis);
+}
diff --git a/board/freescale/t208xqds/law.c b/board/freescale/t208xqds/law.c
new file mode 100644
index 0000000000..74e2a53a8f
--- /dev/null
+++ b/board/freescale/t208xqds/law.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC),
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+	SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+	SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
+#endif
+#ifdef QIXIS_BASE_PHYS
+	SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
+#endif
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+	/* Limit DCSR to 32M to access NPC Trace Buffer */
+	SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE_PHYS
+	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/t208xqds/pci.c b/board/freescale/t208xqds/pci.c
new file mode 100644
index 0000000000..84a89dad4f
--- /dev/null
+++ b/board/freescale/t208xqds/pci.c
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2007-2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/fsl_pci.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/fsl_serdes.h>
+
+void pci_init_board(void)
+{
+	fsl_pcie_init_board(0);
+}
+
+void pci_of_setup(void *blob, bd_t *bd)
+{
+	FT_FSL_PCI_SETUP;
+}
diff --git a/board/freescale/t208xqds/t2080_rcw.cfg b/board/freescale/t208xqds/t2080_rcw.cfg
new file mode 100644
index 0000000000..c2ad0fda55
--- /dev/null
+++ b/board/freescale/t208xqds/t2080_rcw.cfg
@@ -0,0 +1,8 @@
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#SerDes Protocol: 0x66_0x16
+#Core/DDR: 1533Mhz/2133MT/s
+12100017 15000000 00000000 00000000
+66160002 00008400 e8104000 c1000000
+00000000 00000000 00000000 000307fc
+00000000 00000000 00000000 00000004
diff --git a/board/freescale/t208xqds/t2081_rcw.cfg b/board/freescale/t208xqds/t2081_rcw.cfg
new file mode 100644
index 0000000000..a2d5ecf4ad
--- /dev/null
+++ b/board/freescale/t208xqds/t2081_rcw.cfg
@@ -0,0 +1,8 @@
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#Default SerDes Protocol: 0x6C
+#Core/DDR: 1533Mhz/2133MT/s
+12100017 15000000 00000000 00000000
+6c000002 00008000 e8104000 c1000000
+00000000 00000000 00000000 000307fc
+00000000 00000000 00000000 00000004
diff --git a/board/freescale/t208xqds/t208x_pbi.cfg b/board/freescale/t208xqds/t208x_pbi.cfg
new file mode 100644
index 0000000000..e200d926fb
--- /dev/null
+++ b/board/freescale/t208xqds/t208x_pbi.cfg
@@ -0,0 +1,41 @@
+#
+# Copyright 2013 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+# Refer doc/README.pblimage for more details about how-to configure
+# and create PBL boot image
+#
+
+#PBI commands
+#Initialize CPC1
+09010000 00200400
+09138000 00000000
+091380c0 00000100
+#512KB SRAM
+09010100 00000000
+09010104 fff80009
+09010f00 08000000
+#enable CPC1
+09010000 80000000
+#Configure LAW for CPC1
+09000d00 00000000
+09000d04 fff80000
+09000d08 81000012
+#Initialize eSPI controller, default configuration is slow for eSPI to
+#load data, this configuration comes from u-boot eSPI driver.
+09110000 80000403
+09110020 2d170008
+09110024 00100008
+09110028 00100008
+0911002c 00100008
+#Errata for slowing down the MDC clock to make it <= 2.5 MHZ
+094fc030 00008148
+094fd030 00008148
+#Configure alternate space
+09000010 00000000
+09000014 ff000000
+09000018 81000000
+#Flush PBL data
+09138000 00000000
+091380c0 00000000
diff --git a/board/freescale/t208xqds/t208xqds.c b/board/freescale/t208xqds/t208xqds.c
new file mode 100644
index 0000000000..9cfc0bd7c3
--- /dev/null
+++ b/board/freescale/t208xqds/t208xqds.c
@@ -0,0 +1,459 @@
+/*
+ * Copyright 2009-2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <netdev.h>
+#include <linux/compiler.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <fm_eth.h>
+
+#include "../common/qixis.h"
+#include "../common/vsc3316_3308.h"
+#include "t208xqds.h"
+#include "t208xqds_qixis.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	char buf[64];
+	u8 sw;
+	struct cpu_type *cpu = gd->arch.cpu;
+	static const char *freq[4] = {
+		"100.00MHZ(from 8T49N222A)", "125.00MHz",
+		"156.25MHZ", "100.00MHz"
+	};
+
+	printf("Board: %sQDS, ", cpu->name);
+	sw = QIXIS_READ(arch);
+	printf("Sys ID: 0x%02x, Board Arch: V%d, ", QIXIS_READ(id), sw >> 4);
+	printf("Board Version: %c, boot from ", (sw & 0xf) + 'A' - 1);
+
+#ifdef CONFIG_SDCARD
+	puts("SD/MMC\n");
+#elif CONFIG_SPIFLASH
+	puts("SPI\n");
+#else
+	sw = QIXIS_READ(brdcfg[0]);
+	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+	if (sw < 0x8)
+		printf("vBank%d\n", sw);
+	else if (sw == 0x8)
+		puts("Promjet\n");
+	else if (sw == 0x9)
+		puts("NAND\n");
+	else
+		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+#endif
+
+	printf("FPGA: v%d (%s), build %d", (int)QIXIS_READ(scver),
+	       qixis_read_tag(buf), (int)qixis_read_minor());
+	/* the timestamp string contains "\n" at the end */
+	printf(" on %s", qixis_read_time(buf));
+
+	puts("SERDES Reference Clocks:\n");
+	sw = QIXIS_READ(brdcfg[2]);
+	printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[sw >> 6],
+	       freq[(sw >> 4) & 0x3]);
+	printf("SD2_CLK1=%s, SD2_CLK2=%s\n", freq[(sw & 0xf) >> 2],
+	       freq[sw & 0x3]);
+
+	return 0;
+}
+
+int select_i2c_ch_pca9547(u8 ch)
+{
+	int ret;
+
+	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+	if (ret) {
+		puts("PCA: failed to select proper channel\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+int brd_mux_lane_to_slot(void)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 srds_prtcl_s1;
+
+	srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
+				FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+	srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+#if defined(CONFIG_T2080QDS)
+	u32 srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
+				FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+	srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+#endif
+
+	switch (srds_prtcl_s1) {
+	case 0:
+		/* SerDes1 is not enabled */
+		break;
+#if defined(CONFIG_T2080QDS)
+	case 0x1c:
+	case 0xa2:
+		/* SD1(A:D) => SLOT3 SGMII
+		 * SD1(G:H) => SLOT1 SGMII
+		 */
+		QIXIS_WRITE(brdcfg[12], 0x1a);
+		break;
+	case 0x94:
+	case 0x95:
+		/* SD1(A:B) => SLOT3 SGMII@1.25bps
+		 * SD1(C:D) => SFP Module, SGMII@3.125bps
+		 * SD1(E:H) => SLOT1 SGMII@1.25bps
+		 */
+	case 0x96:
+		/* SD1(A:B) => SLOT3 SGMII@1.25bps
+		 * SD1(C)   => SFP Module, SGMII@3.125bps
+		 * SD1(D)   => SFP Module, SGMII@1.25bps
+		 * SD1(E:H) => SLOT1 PCIe4 x4
+		 */
+		QIXIS_WRITE(brdcfg[12], 0x3a);
+		break;
+	case 0x51:
+		/* SD1(A:D) => SLOT3 XAUI
+		 * SD1(E)   => SLOT1 PCIe4
+		 * SD1(F:H) => SLOT2 SGMII
+		 */
+		QIXIS_WRITE(brdcfg[12], 0x15);
+		break;
+	case 0x66:
+	case 0x67:
+		/* SD1(A:D) => XFI cage
+		 * SD1(E:H) => SLOT1 PCIe4
+		 */
+		QIXIS_WRITE(brdcfg[12], 0xfe);
+		break;
+	case 0x6b:
+		/* SD1(A:D) => XFI cage
+		 * SD1(E)   => SLOT1 PCIe4
+		 * SD1(F:H) => SLOT2 SGMII
+		 */
+		QIXIS_WRITE(brdcfg[12], 0xf1);
+		break;
+	case 0x6c:
+	case 0x6d:
+		/* SD1(A:B) => XFI cage
+		 * SD1(C:D) => SLOT3 SGMII
+		 * SD1(E:H) => SLOT1 PCIe4
+		 */
+		QIXIS_WRITE(brdcfg[12], 0xda);
+		break;
+	case 0x6e:
+		/* SD1(A:B) => SFP Module, XFI
+		 * SD1(C:D) => SLOT3 SGMII
+		 * SD1(E:F) => SLOT1 PCIe4 x2
+		 * SD1(G:H) => SLOT2 SGMII
+		 */
+		QIXIS_WRITE(brdcfg[12], 0xd9);
+		break;
+	case 0xda:
+		/* SD1(A:H) => SLOT3 PCIe3 x8
+		 */
+		 QIXIS_WRITE(brdcfg[12], 0x0);
+		 break;
+	case 0xc8:
+		/* SD1(A)   => SLOT3 PCIe3 x1
+		 * SD1(B)   => SFP Module, SGMII@1.25bps
+		 * SD1(C:D) => SFP Module, SGMII@3.125bps
+		 * SD1(E:F) => SLOT1 PCIe4 x2
+		 * SD1(G:H) => SLOT2 SGMII
+		 */
+		 QIXIS_WRITE(brdcfg[12], 0x79);
+		 break;
+	case 0xab:
+		/* SD1(A:D) => SLOT3 PCIe3 x4
+		 * SD1(E:H) => SLOT1 PCIe4 x4
+		 */
+		 QIXIS_WRITE(brdcfg[12], 0x1a);
+		 break;
+#elif defined(CONFIG_T2081QDS)
+	case 0x51:
+		/* SD1(A:D) => SLOT2 XAUI
+		 * SD1(E)   => SLOT1 PCIe4 x1
+		 * SD1(F:H) => SLOT3 SGMII
+		 */
+		QIXIS_WRITE(brdcfg[12], 0x98);
+		QIXIS_WRITE(brdcfg[13], 0x70);
+		break;
+	case 0x6b:
+		/* SD1(A:D) => XFI SFP Module
+		 * SD1(E)   => SLOT1 PCIe4 x1
+		 * SD1(F:H) => SLOT3 SGMII
+		 */
+		QIXIS_WRITE(brdcfg[12], 0x80);
+		QIXIS_WRITE(brdcfg[13], 0x70);
+		break;
+	case 0x6c:
+		/* SD1(A:B) => XFI SFP Module
+		 * SD1(C:D) => SLOT2 SGMII
+		 * SD1(E:H) => SLOT1 PCIe4 x4
+		 */
+		QIXIS_WRITE(brdcfg[12], 0xe8);
+		QIXIS_WRITE(brdcfg[13], 0x0);
+		break;
+	case 0x6d:
+		/* SD1(A:B) => XFI SFP Module
+		 * SD1(C:D) => SLOT2 SGMII
+		 * SD1(E:H) => SLOT1 PCIe4 x4
+		 */
+		QIXIS_WRITE(brdcfg[12], 0xe8);
+		QIXIS_WRITE(brdcfg[13], 0x0);
+		break;
+	case 0xaa:
+	case 0xab:
+		/* SD1(A:D) => SLOT2 PCIe3 x4
+		 * SD1(F:H) => SLOT1 SGMI4 x4
+		 */
+		QIXIS_WRITE(brdcfg[12], 0xf8);
+		QIXIS_WRITE(brdcfg[13], 0x0);
+		break;
+	case 0xca:
+	case 0xcb:
+		/* SD1(A)   => SLOT2 PCIe3 x1
+		 * SD1(B)   => SLOT7 SGMII
+		 * SD1(C)   => SLOT6 SGMII
+		 * SD1(D)   => SLOT5 SGMII
+		 * SD1(E)   => SLOT1 PCIe4 x1
+		 * SD1(F:H) => SLOT3 SGMII
+		 */
+		QIXIS_WRITE(brdcfg[12], 0x80);
+		QIXIS_WRITE(brdcfg[13], 0x70);
+		break;
+	case 0xde:
+	case 0xdf:
+		/* SD1(A:D) => SLOT2 PCIe3 x4
+		 * SD1(E)   => SLOT1 PCIe4 x1
+		 * SD1(F)   => SLOT4 PCIe1 x1
+		 * SD1(G)   => SLOT3 PCIe2 x1
+		 * SD1(H)   => SLOT7 SGMII
+		 */
+		QIXIS_WRITE(brdcfg[12], 0x98);
+		QIXIS_WRITE(brdcfg[13], 0x25);
+		break;
+	case 0xf2:
+		/* SD1(A)   => SLOT2 PCIe3 x1
+		 * SD1(B:D) => SLOT7 SGMII
+		 * SD1(E)   => SLOT1 PCIe4 x1
+		 * SD1(F)   => SLOT4 PCIe1 x1
+		 * SD1(G)   => SLOT3 PCIe2 x1
+		 * SD1(H)   => SLOT7 SGMII
+		 */
+		QIXIS_WRITE(brdcfg[12], 0x81);
+		QIXIS_WRITE(brdcfg[13], 0xa5);
+		break;
+#endif
+	default:
+		printf("WARNING: unsupported for SerDes1 Protocol %d\n",
+		       srds_prtcl_s1);
+		return -1;
+	}
+
+#ifdef CONFIG_T2080QDS
+	switch (srds_prtcl_s2) {
+	case 0:
+		/* SerDes2 is not enabled */
+		break;
+	case 0x01:
+	case 0x02:
+		/* SD2(A:H) => SLOT4 PCIe1 */
+		QIXIS_WRITE(brdcfg[13], 0x10);
+		break;
+	case 0x15:
+	case 0x16:
+		/*
+		 * SD2(A:D) => SLOT4 PCIe1
+		 * SD2(E:F) => SLOT5 PCIe2
+		 * SD2(G:H) => SATA1,SATA2
+		 */
+		QIXIS_WRITE(brdcfg[13], 0xb0);
+		break;
+	case 0x18:
+		/*
+		 * SD2(A:D) => SLOT4 PCIe1
+		 * SD2(E:F) => SLOT5 Aurora
+		 * SD2(G:H) => SATA1,SATA2
+		 */
+		QIXIS_WRITE(brdcfg[13], 0x78);
+		break;
+	case 0x1f:
+		/*
+		 * SD2(A:D) => SLOT4 PCIe1
+		 * SD2(E:H) => SLOT5 PCIe2
+		 */
+		QIXIS_WRITE(brdcfg[13], 0xa0);
+		break;
+	case 0x29:
+	case 0x2d:
+	case 0x2e:
+		/*
+		 * SD2(A:D) => SLOT4 SRIO2
+		 * SD2(E:H) => SLOT5 SRIO1
+		 */
+		QIXIS_WRITE(brdcfg[13], 0xa0);
+		break;
+	case 0x36:
+		/*
+		 * SD2(A:D) => SLOT4 SRIO2
+		 * SD2(E:F) => Aurora
+		 * SD2(G:H) => SATA1,SATA2
+		 */
+		QIXIS_WRITE(brdcfg[13], 0x78);
+		break;
+	default:
+		printf("WARNING: unsupported for SerDes2 Protocol %d\n",
+		       srds_prtcl_s2);
+		return -1;
+	}
+#endif
+	return 0;
+}
+
+int board_early_init_r(void)
+{
+	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+	/*
+	 * Remap Boot flash + PROMJET region to caching-inhibited
+	 * so that flash can be erased properly.
+	 */
+
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+
+	/* invalidate existing TLB entry for flash + promjet */
+	disable_tlb(flash_esel);
+
+	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, flash_esel, BOOKE_PAGESZ_256M, 1);
+
+	set_liodns();
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	setup_portals();
+#endif
+
+	/* Disable remote I2C connection to qixis fpga */
+	QIXIS_WRITE(brdcfg[5], QIXIS_READ(brdcfg[5]) & ~BRDCFG5_IRE);
+
+	brd_mux_lane_to_slot();
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+
+	return 0;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+	u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
+#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT
+	/* use accurate clock measurement */
+	int freq = QIXIS_READ(clk_freq[0]) << 8 | QIXIS_READ(clk_freq[1]);
+	int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]);
+	u32 val;
+
+	val =  freq * base;
+	if (val) {
+		debug("SYS Clock measurement is: %d\n", val);
+		return val;
+	} else {
+		printf("Warning: SYS clock measurement is invalid, ");
+		printf("using value from brdcfg1.\n");
+	}
+#endif
+
+	switch (sysclk_conf & 0x0F) {
+	case QIXIS_SYSCLK_83:
+		return 83333333;
+	case QIXIS_SYSCLK_100:
+		return 100000000;
+	case QIXIS_SYSCLK_125:
+		return 125000000;
+	case QIXIS_SYSCLK_133:
+		return 133333333;
+	case QIXIS_SYSCLK_150:
+		return 150000000;
+	case QIXIS_SYSCLK_160:
+		return 160000000;
+	case QIXIS_SYSCLK_166:
+		return 166666666;
+	}
+	return 66666666;
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+	u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
+#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT
+	/* use accurate clock measurement */
+	int freq = QIXIS_READ(clk_freq[2]) << 8 | QIXIS_READ(clk_freq[3]);
+	int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]);
+	u32 val;
+
+	val =  freq * base;
+	if (val) {
+		debug("DDR Clock measurement is: %d\n", val);
+		return val;
+	} else {
+		printf("Warning: DDR clock measurement is invalid, ");
+		printf("using value from brdcfg1.\n");
+	}
+#endif
+
+	switch ((ddrclk_conf & 0x30) >> 4) {
+	case QIXIS_DDRCLK_100:
+		return 100000000;
+	case QIXIS_DDRCLK_125:
+		return 125000000;
+	case QIXIS_DDRCLK_133:
+		return 133333333;
+	}
+	return 66666666;
+}
+
+int misc_init_r(void)
+{
+	return 0;
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	phys_addr_t base;
+	phys_size_t size;
+
+	ft_cpu_setup(blob, bd);
+
+	base = getenv_bootm_low();
+	size = getenv_bootm_size();
+
+	fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#ifdef CONFIG_PCI
+	pci_of_setup(blob, bd);
+#endif
+
+	fdt_fixup_liodn(blob);
+	fdt_fixup_dr_usb(blob, bd);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+	fdt_fixup_fman_ethernet(blob);
+	fdt_fixup_board_enet(blob);
+#endif
+}
diff --git a/board/freescale/t208xqds/t208xqds.h b/board/freescale/t208xqds/t208xqds.h
new file mode 100644
index 0000000000..39fcef28c3
--- /dev/null
+++ b/board/freescale/t208xqds/t208xqds.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2011-2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CORENET_DS_H__
+#define __CORENET_DS_H__
+
+void fdt_fixup_board_enet(void *blob);
+void pci_of_setup(void *blob, bd_t *bd);
+
+#endif
diff --git a/board/freescale/t208xqds/t208xqds_qixis.h b/board/freescale/t208xqds/t208xqds_qixis.h
new file mode 100644
index 0000000000..bdcdc12f59
--- /dev/null
+++ b/board/freescale/t208xqds/t208xqds_qixis.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef __T208xQDS_QIXIS_H__
+#define __T208xQDS_QIXIS_H__
+
+/* Definitions of QIXIS Registers for T208xQDS */
+
+#define QIXIS_SRDS1CLK_122		0x5a
+#define QIXIS_SRDS1CLK_125		0x5e
+
+
+/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */
+#define BRDCFG4_EMISEL_MASK             0xE0
+#define BRDCFG4_EMISEL_SHIFT            5
+
+/* SYSCLK */
+#define QIXIS_SYSCLK_66                 0x0
+#define QIXIS_SYSCLK_83                 0x1
+#define QIXIS_SYSCLK_100                0x2
+#define QIXIS_SYSCLK_125                0x3
+#define QIXIS_SYSCLK_133                0x4
+#define QIXIS_SYSCLK_150                0x5
+#define QIXIS_SYSCLK_160                0x6
+#define QIXIS_SYSCLK_166                0x7
+
+/* DDRCLK */
+#define QIXIS_DDRCLK_66                 0x0
+#define QIXIS_DDRCLK_100                0x1
+#define QIXIS_DDRCLK_125                0x2
+#define QIXIS_DDRCLK_133                0x3
+
+#define BRDCFG5_IRE                     0x20    /* i2c Remote i2c1 enable */
+
+#define BRDCFG9_SFP_TX_EN		0x10
+
+#define BRDCFG12_SD3EN_MASK             0x20
+#define BRDCFG12_SD3MX_MASK             0x08
+#define BRDCFG12_SD3MX_SLOT5            0x08
+#define BRDCFG12_SD3MX_SLOT6            0x00
+#define BRDCFG12_SD4EN_MASK             0x04
+#define BRDCFG12_SD4MX_MASK             0x03
+#define BRDCFG12_SD4MX_SLOT7            0x02
+#define BRDCFG12_SD4MX_SLOT8            0x01
+#define BRDCFG12_SD4MX_AURO_SATA        0x00
+#endif
diff --git a/board/freescale/t208xqds/tlb.c b/board/freescale/t208xqds/tlb.c
new file mode 100644
index 0000000000..62cd11033a
--- /dev/null
+++ b/board/freescale/t208xqds/tlb.c
@@ -0,0 +1,146 @@
+/*
+ * Copyright 2008-2013 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+	/* TLB 0 - for temp stack in cache */
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+
+	/* TLB 1 */
+	/* *I*** - Covers boot page */
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR)
+	/*
+	 * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the
+	 * SRAM is at 0xfff00000, it covered the 0xfffff000.
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 0, BOOKE_PAGESZ_1M, 1),
+#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
+	/*
+	 * SRIO_PCIE_BOOT-SLAVE. When slave boot, the address of the
+	 * space is at 0xfff00000, it covered the 0xfffff000.
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR,
+		      CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
+		      0, 0, BOOKE_PAGESZ_1M, 1),
+#else
+	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 0, BOOKE_PAGESZ_4K, 1),
+#endif
+
+	/* *I*G* - CCSRBAR */
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 1, BOOKE_PAGESZ_16M, 1),
+
+	/* *I*G* - Flash, localbus */
+	/* This will be changed to *I*G* after relocation to RAM. */
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+		      MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
+		      0, 2, BOOKE_PAGESZ_256M, 1),
+
+	/* *I*G* - PCIe 1, 0x80000000 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 3, BOOKE_PAGESZ_512M, 1),
+
+	/* *I*G* - PCIe 2, 0xa0000000 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE2_MEM_VIRT, CONFIG_SYS_PCIE2_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 4, BOOKE_PAGESZ_256M, 1),
+
+	/* *I*G* - PCIe 3, 0xb0000000 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 5, BOOKE_PAGESZ_256M, 1),
+
+
+	/* *I*G* - PCIe 4, 0xc0000000 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE4_MEM_VIRT, CONFIG_SYS_PCIE4_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 6, BOOKE_PAGESZ_256M, 1),
+
+	/* *I*G* - PCI I/O */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 7, BOOKE_PAGESZ_256K, 1),
+
+	/* Bman/Qman */
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 9, BOOKE_PAGESZ_16M, 1),
+	SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000,
+		      CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 10, BOOKE_PAGESZ_16M, 1),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 11, BOOKE_PAGESZ_16M, 1),
+	SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000,
+		      CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 12, BOOKE_PAGESZ_16M, 1),
+#endif
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 13, BOOKE_PAGESZ_32M, 1),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE
+	/*
+	 * *I*G - NAND
+	 * entry 14 and 15 has been used hard coded, they will be disabled
+	 * in cpu_init_f, so we use entry 16 for nand.
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 16, BOOKE_PAGESZ_64K, 1),
+#endif
+#ifdef QIXIS_BASE_PHYS
+	SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 17, BOOKE_PAGESZ_4K, 1),
+#endif
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
+	/*
+	 * SRIO_PCIE_BOOT-SLAVE. 1M space from 0xffe00000 for
+	 * fetching ucode and ENV from master
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR,
+		      CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G,
+		      0, 18, BOOKE_PAGESZ_1M, 1),
+#endif
+
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);