Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

84 files changed, 1280 insertions, 465 deletions

diff --git a/board/freescale/b4860qds/Makefile b/board/freescale/b4860qds/Makefile
index 0acd2a9aa4..673d2ea56a 100644
--- a/board/freescale/b4860qds/Makefile
+++ b/board/freescale/b4860qds/Makefile
@@ -5,11 +5,11 @@
 #
 
 ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
+obj-y	+= spl.o
 else
 obj-y	+= b4860qds.o
-obj-$(CONFIG_B4860QDS)+= eth_b4860qds.o
-obj-$(CONFIG_PCI)      += pci.o
+obj-$(CONFIG_B4860QDS)	+= eth_b4860qds.o
+obj-$(CONFIG_PCI)	+= pci.o
 endif
 
 obj-y	+= ddr.o
diff --git a/board/freescale/b4860qds/ddr.c b/board/freescale/b4860qds/ddr.c
index eb10a6f364..31b186ea8c 100644
--- a/board/freescale/b4860qds/ddr.c
+++ b/board/freescale/b4860qds/ddr.c
@@ -179,15 +179,13 @@ phys_size_t initdram(int board_type)
 
 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
 	puts("Initializing....using SPD\n");
-
 	dram_size = fsl_ddr_sdram();
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
 #else
 	dram_size =  fsl_ddr_sdram_size();
 #endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
+
 	return dram_size;
 }
 
diff --git a/board/freescale/b4860qds/spl.c b/board/freescale/b4860qds/spl.c
index 3f7cc03581..fabc78301a 100644
--- a/board/freescale/b4860qds/spl.c
+++ b/board/freescale/b4860qds/spl.c
@@ -91,6 +91,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifndef CONFIG_SPL_NAND_BOOT
 	env_init();
diff --git a/board/freescale/bsc9131rdb/Makefile b/board/freescale/bsc9131rdb/Makefile
index b26d3a1e63..8027750efb 100644
--- a/board/freescale/bsc9131rdb/Makefile
+++ b/board/freescale/bsc9131rdb/Makefile
@@ -13,15 +13,11 @@ endif
 endif
 
 ifdef MINIMAL
-
-obj-y	+= spl_minimal.o tlb.o law.o
-
+obj-y	+= spl_minimal.o
 else
-
-obj-y        += bsc9131rdb.o
-obj-y        += ddr.o
-obj-y        += law.o
-obj-y        += tlb.o
-#obj-y		+= bsc9131rdb_mux.o
-
+obj-y	+= bsc9131rdb.o
+obj-y	+= ddr.o
 endif
+
+obj-y	+= law.o
+obj-y	+= tlb.o
diff --git a/board/freescale/bsc9132qds/Makefile b/board/freescale/bsc9132qds/Makefile
index 2e4170f512..54193350af 100644
--- a/board/freescale/bsc9132qds/Makefile
+++ b/board/freescale/bsc9132qds/Makefile
@@ -13,14 +13,11 @@ endif
 endif
 
 ifdef MINIMAL
-
-obj-y	+= spl_minimal.o tlb.o law.o
-
+obj-y	+= spl_minimal.o
 else
-
 obj-y	+= bsc9132qds.o
 obj-y	+= ddr.o
+endif
+
 obj-y	+= law.o
 obj-y	+= tlb.o
-
-endif
diff --git a/board/freescale/c29xpcie/Makefile b/board/freescale/c29xpcie/Makefile
index 818484a57d..93b3cba031 100644
--- a/board/freescale/c29xpcie/Makefile
+++ b/board/freescale/c29xpcie/Makefile
@@ -11,15 +11,15 @@ endif
 endif
 
 ifdef MINIMAL
-obj-y	+= spl_minimal.o tlb.o law.o
+obj-y	+= spl_minimal.o
 else
 ifdef CONFIG_SPL_BUILD
 obj-y	+= spl.o
 endif
-
 obj-y	+= c29xpcie.o
 obj-y	+= cpld.o
 obj-y	+= ddr.o
+endif
+
 obj-y	+= law.o
 obj-y	+= tlb.o
-endif
diff --git a/board/freescale/c29xpcie/c29xpcie.c b/board/freescale/c29xpcie/c29xpcie.c
index e325b4db4a..45f463f01f 100644
--- a/board/freescale/c29xpcie/c29xpcie.c
+++ b/board/freescale/c29xpcie/c29xpcie.c
@@ -122,7 +122,7 @@ void fdt_del_sec(void *blob, int offset)
 
 	while ((nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,sec-v6.0",
 			CONFIG_SYS_CCSRBAR_PHYS + CONFIG_SYS_FSL_SEC_OFFSET
-			+ offset * 0x20000)) >= 0) {
+			+ offset * CONFIG_SYS_FSL_SEC_IDX_OFFSET)) >= 0) {
 		fdt_del_node(blob, nodeoff);
 		offset++;
 	}
diff --git a/board/freescale/c29xpcie/spl.c b/board/freescale/c29xpcie/spl.c
index 3d31d41a4f..d8d73c70b8 100644
--- a/board/freescale/c29xpcie/spl.c
+++ b/board/freescale/c29xpcie/spl.c
@@ -57,6 +57,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 	/* relocate environment function pointers etc. */
 	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
diff --git a/board/freescale/common/ls102xa_stream_id.c b/board/freescale/common/ls102xa_stream_id.c
index f43426991b..0abaffb334 100644
--- a/board/freescale/common/ls102xa_stream_id.c
+++ b/board/freescale/common/ls102xa_stream_id.c
@@ -10,11 +10,14 @@
 
 void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num)
 {
-	uint32_t *scfg = (uint32_t *)CONFIG_SYS_FSL_SCFG_ADDR;
+	void *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
 	int i;
+	u32 icid;
 
-	for (i = 0; i < num; i++)
-		out_be32(scfg + id[i].offset, id[i].stream_id);
+	for (i = 0; i < num; i++) {
+		icid = (id[i].stream_id & 0xff) << 24;
+		out_be32((u32 *)(scfg + id[i].offset), icid);
+	}
 }
 
 void ls1021x_config_caam_stream_id(struct liodn_id_table *tbl, int size)
@@ -28,6 +31,6 @@ void ls1021x_config_caam_stream_id(struct liodn_id_table *tbl, int size)
 		else
 			liodn = tbl[i].id[0];
 
-		out_le32((uint32_t *)(tbl[i].reg_offset), liodn);
+		out_le32((u32 *)(tbl[i].reg_offset), liodn);
 	}
 }
diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c
index 113295f64a..0db0ed6670 100644
--- a/board/freescale/common/qixis.c
+++ b/board/freescale/common/qixis.c
@@ -14,6 +14,13 @@
 #include <i2c.h>
 #include "qixis.h"
 
+#ifndef QIXIS_LBMAP_BRDCFG_REG
+/*
+ * For consistency with existing platforms
+ */
+#define QIXIS_LBMAP_BRDCFG_REG 0x00
+#endif
+
 #ifdef CONFIG_SYS_I2C_FPGA_ADDR
 u8 qixis_read_i2c(unsigned int reg)
 {
@@ -27,6 +34,7 @@ void qixis_write_i2c(unsigned int reg, u8 value)
 }
 #endif
 
+#ifdef QIXIS_BASE
 u8 qixis_read(unsigned int reg)
 {
 	void *p = (void *)QIXIS_BASE;
@@ -40,6 +48,7 @@ void qixis_write(unsigned int reg, u8 value)
 
 	out_8(p + reg, value);
 }
+#endif
 
 u16 qixis_read_minor(void)
 {
@@ -142,9 +151,9 @@ static void __maybe_unused set_lbmap(int lbmap)
 {
 	u8 reg;
 
-	reg = QIXIS_READ(brdcfg[0]);
+	reg = QIXIS_READ(brdcfg[QIXIS_LBMAP_BRDCFG_REG]);
 	reg = (reg & ~QIXIS_LBMAP_MASK) | lbmap;
-	QIXIS_WRITE(brdcfg[0], reg);
+	QIXIS_WRITE(brdcfg[QIXIS_LBMAP_BRDCFG_REG], reg);
 }
 
 static void __maybe_unused set_rcw_src(int rcw_src)
diff --git a/board/freescale/ls1012afrdm/Kconfig b/board/freescale/ls1012afrdm/Kconfig
new file mode 100644
index 0000000000..a34521cf79
--- /dev/null
+++ b/board/freescale/ls1012afrdm/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_LS1012AFRDM
+
+config SYS_BOARD
+	default "ls1012afrdm"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_SOC
+	default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+	default "ls1012afrdm"
+
+endif
diff --git a/board/freescale/ls1012afrdm/MAINTAINERS b/board/freescale/ls1012afrdm/MAINTAINERS
new file mode 100644
index 0000000000..842f86f861
--- /dev/null
+++ b/board/freescale/ls1012afrdm/MAINTAINERS
@@ -0,0 +1,6 @@
+LS1012AFRDM BOARD
+M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
+S:	Maintained
+F:	board/freescale/ls1012afrdm/
+F:	include/configs/ls1012afrdm.h
+F:	configs/ls1012afrdm_qspi_defconfig
diff --git a/board/freescale/ls1012afrdm/Makefile b/board/freescale/ls1012afrdm/Makefile
new file mode 100644
index 0000000000..dbfa2cea38
--- /dev/null
+++ b/board/freescale/ls1012afrdm/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright 2016 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-y += ls1012afrdm.o
diff --git a/board/freescale/ls1012afrdm/README b/board/freescale/ls1012afrdm/README
new file mode 100644
index 0000000000..181c4615a8
--- /dev/null
+++ b/board/freescale/ls1012afrdm/README
@@ -0,0 +1,58 @@
+Overview
+--------
+QorIQ LS1012A FREEDOM (LS1012AFRDM) is a high-performance development
+platform, with a complete debugging environment. The LS1012AFRDM board
+supports the QorIQ LS1012A processor and is optimized to support the
+high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports.
+
+LS1012A SoC Overview
+--------------------
+Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A
+SoC overview.
+
+ LS1012AFRDM board Overview
+ -----------------------
+ - SERDES Connections, 2 lanes supportingspeeds upto 1 Gbit/s
+     - 2 SGMII 1G PHYs
+ - DDR Controller
+     - 4 Gb DDR3L SDRAM memory, running at data rates up to 1 GT/s
+	operating at 1.35 V
+ - QSPI
+     - Onboard 512 Mbit QSPI flash memory running at speed up
+      to 108/54 MHz
+ - One high-speed USB 2.0/3.0 port, one USB 2.0 port
+     - USB 2.0/3.0 port is configured as On-The-Go (OTG) with a
+       Micro-AB connector.
+     - USB 2.0 port is a debug port (CMSIS DAP) and is configured
+       as a Micro-AB device.
+ - I2C controller
+     - One I2C bus with connectivity to Arduino headers
+ - UART
+     - UART (Console): UART1 (Without flow control) for console
+ - ARM JTAG support
+     - ARM Cortex® 10-pin JTAG connector for LS1012A
+     - CMSIS DAP through K20 microcontroller
+ - SAI Audio interface
+     - One SAI port, SAI 2 with full duplex support
+ - Clocks
+     - 25 MHz crystal for LS1012A
+     - 8 MHz Crystal for K20
+     - 24 MHz for SC16IS740IPW SPI to Dual UART bridge
+ - Power Supplies
+     - 5 V input supply from USB
+     - 0.9 V, 1.35 V, and 1.8 V for VDD/Core, DDR, I/O, and
+       other board interfaces
+
+Booting Options
+---------------
+QSPI Flash 1
+
+QSPI flash map
+--------------
+Images		| Size	|QSPI Flash Address
+------------------------------------------
+RCW + PBI	| 1MB	| 0x4000_0000
+U-boot 		| 1MB	| 0x4010_0000
+U-boot Env 	| 1MB	| 0x4020_0000
+PPA FIT image	| 2MB	| 0x4050_0000
+Linux ITB	| ~53MB | 0x40A0_0000
diff --git a/board/freescale/ls1012afrdm/ls1012afrdm.c b/board/freescale/ls1012afrdm/ls1012afrdm.c
new file mode 100644
index 0000000000..a94a458f53
--- /dev/null
+++ b/board/freescale/ls1012afrdm/ls1012afrdm.c
@@ -0,0 +1,192 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/soc.h>
+#include <hwconfig.h>
+#include <fsl_csu.h>
+#include <environment.h>
+#include <fsl_mmdc.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void set_wait_for_bits_clear(void *ptr, u32 value, u32 bits)
+{
+	int timeout = 1000;
+
+	out_be32(ptr, value);
+
+	while (in_be32(ptr) & bits) {
+		udelay(100);
+		timeout--;
+	}
+	if (timeout <= 0)
+		puts("Error: wait for clear timeout.\n");
+}
+
+int checkboard(void)
+{
+	puts("Board: LS1012AFRDM ");
+
+	return 0;
+}
+
+void mmdc_init(void)
+{
+	struct mmdc_p_regs *mmdc =
+		(struct mmdc_p_regs *)CONFIG_SYS_FSL_DDR_ADDR;
+
+	out_be32(&mmdc->mdscr, CONFIGURATION_REQ);
+
+	/* configure timing parms */
+	out_be32(&mmdc->mdotc,  CONFIG_SYS_MMDC_CORE_ODT_TIMING);
+	out_be32(&mmdc->mdcfg0, CONFIG_SYS_MMDC_CORE_TIMING_CFG_0);
+	out_be32(&mmdc->mdcfg1, CONFIG_SYS_MMDC_CORE_TIMING_CFG_1);
+	out_be32(&mmdc->mdcfg2, CONFIG_SYS_MMDC_CORE_TIMING_CFG_2);
+
+	/* other parms	*/
+	out_be32(&mmdc->mdmisc,    CONFIG_SYS_MMDC_CORE_MISC);
+	out_be32(&mmdc->mpmur0,    CONFIG_SYS_MMDC_PHY_MEASURE_UNIT);
+	out_be32(&mmdc->mdrwd,     CONFIG_SYS_MMDC_CORE_RDWR_CMD_DELAY);
+	out_be32(&mmdc->mpodtctrl, CONFIG_SYS_MMDC_PHY_ODT_CTRL);
+
+	/* out of reset delays */
+	out_be32(&mmdc->mdor,  CONFIG_SYS_MMDC_CORE_OUT_OF_RESET_DELAY);
+
+	/* physical parms */
+	out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_1);
+	out_be32(&mmdc->mdasp, CONFIG_SYS_MMDC_CORE_ADDR_PARTITION);
+
+       /* Enable MMDC */
+	out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_2);
+
+	/* dram init sequence: update MRs */
+	out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x8) | CONFIGURATION_REQ |
+				CMD_LOAD_MODE_REG | CMD_BANK_ADDR_2));
+	out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
+				CMD_BANK_ADDR_3));
+	out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
+				CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1));
+	out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x19) |
+				CMD_ADDR_LSB_MR_ADDR(0x30) | CONFIGURATION_REQ |
+				CMD_LOAD_MODE_REG | CMD_BANK_ADDR_0));
+
+       /* dram init sequence: ZQCL */
+	out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
+				CMD_ZQ_CALIBRATION | CMD_BANK_ADDR_0));
+	set_wait_for_bits_clear(&mmdc->mpzqhwctrl,
+				CONFIG_SYS_MMDC_PHY_ZQ_HW_CTRL,
+				FORCE_ZQ_AUTO_CALIBRATION);
+
+       /* Calibrations now: wr lvl */
+	out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x84) |
+				CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
+				CMD_BANK_ADDR_1));
+	out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | WL_EN | CMD_NORMAL));
+	set_wait_for_bits_clear(&mmdc->mpwlgcr, WR_LVL_HW_EN, WR_LVL_HW_EN);
+
+	mdelay(1);
+
+	out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
+				CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1));
+	out_be32(&mmdc->mdscr, CONFIGURATION_REQ);
+
+	mdelay(1);
+
+       /* Calibrations now: Read DQS gating calibration */
+	out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
+				CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0));
+	out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
+				CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3));
+	out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN);
+	out_be32(&mmdc->mprddlctl, CONFIG_SYS_MMDC_PHY_RD_DLY_LINES_CFG);
+	set_wait_for_bits_clear(&mmdc->mpdgctrl0,
+				AUTO_RD_DQS_GATING_CALIBRATION_EN,
+				AUTO_RD_DQS_GATING_CALIBRATION_EN);
+
+	out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
+				CMD_BANK_ADDR_3));
+
+       /* Calibrations now: Read calibration */
+	out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
+				CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0));
+	out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
+				CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3));
+	out_be32(&mmdc->mppdcmpr2,  MPR_COMPARE_EN);
+	set_wait_for_bits_clear(&mmdc->mprddlhwctl,
+				AUTO_RD_CALIBRATION_EN,
+				AUTO_RD_CALIBRATION_EN);
+
+	out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
+				CMD_BANK_ADDR_3));
+
+       /* PD, SR */
+	out_be32(&mmdc->mdpdc, CONFIG_SYS_MMDC_CORE_PWR_DOWN_CTRL);
+	out_be32(&mmdc->mapsr, CONFIG_SYS_MMDC_CORE_PWR_SAV_CTRL_STAT);
+
+       /* refresh scheme */
+	set_wait_for_bits_clear(&mmdc->mdref,
+				CONFIG_SYS_MMDC_CORE_REFRESH_CTL,
+				START_REFRESH);
+
+       /* disable CON_REQ */
+	out_be32(&mmdc->mdscr, DISABLE_CFG_REQ);
+}
+
+int dram_init(void)
+{
+	mmdc_init();
+
+	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
+
+int board_early_init_f(void)
+{
+	fsl_lsch2_early_init_f();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
+	/*
+	 * Set CCI-400 control override register to enable barrier
+	 * transaction
+	 */
+	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
+
+#ifdef CONFIG_ENV_IS_NOWHERE
+	gd->env_addr = (ulong)&default_environment[0];
+#endif
+
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+	enable_layerscape_ns_access();
+#endif
+
+	return 0;
+}
+
+int ft_board_setup(void *blob, bd_t *bd)
+{
+	arch_fixup_fdt(blob);
+
+	ft_cpu_setup(blob, bd);
+
+	return 0;
+}
diff --git a/board/freescale/ls1012aqds/Kconfig b/board/freescale/ls1012aqds/Kconfig
new file mode 100644
index 0000000000..1257ec8d06
--- /dev/null
+++ b/board/freescale/ls1012aqds/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_LS1012AQDS
+
+config SYS_BOARD
+	default "ls1012aqds"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_SOC
+	default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+	default "ls1012aqds"
+
+endif
diff --git a/board/freescale/ls1012aqds/MAINTAINERS b/board/freescale/ls1012aqds/MAINTAINERS
new file mode 100644
index 0000000000..27c4affd30
--- /dev/null
+++ b/board/freescale/ls1012aqds/MAINTAINERS
@@ -0,0 +1,6 @@
+LS1012AQDS BOARD
+M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
+S:	Maintained
+F:	board/freescale/ls1012aqds/
+F:	include/configs/ls1012aqds.h
+F:	configs/ls1012aqds_qspi_defconfig
diff --git a/board/freescale/ls1012aqds/Makefile b/board/freescale/ls1012aqds/Makefile
new file mode 100644
index 0000000000..0b813f9784
--- /dev/null
+++ b/board/freescale/ls1012aqds/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright 2016 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-y += ls1012aqds.o
diff --git a/board/freescale/ls1012aqds/README b/board/freescale/ls1012aqds/README
new file mode 100644
index 0000000000..dee4b302c1
--- /dev/null
+++ b/board/freescale/ls1012aqds/README
@@ -0,0 +1,59 @@
+Overview
+--------
+QorIQ LS1012A Development System (LS1012AQDS) is a high-performance
+development platform, with a complete debugging environment.
+The LS1012AQDS board supports the QorIQ LS1012A processor and is
+optimized to support the high-bandwidth DDR3L memory and
+a full complement of high-speed SerDes ports.
+
+LS1012A SoC Overview
+--------------------
+Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1012A
+SoC overview.
+
+LS1012AQDS board Overview
+-----------------------
+ - SERDES Connections, 4 lanes supporting:
+      - PCI Express - 3.0
+      - SGMII, SGMII 2.5
+      - SATA 3.0
+ - DDR Controller
+     - 16-bit, 1 GB DDR3L SDRAM memory, running at data rates up to 1 GT/s
+ - QSPI Controller
+     - A dual 1:3 switch, NX3L4357GM,115 (U35) drives the QSPI chip-select
+       signals to QSPI NOR flash memory (2 virtual banks) and the QSPI
+       emulator
+ - USB 3.0
+    - One USB 3.0 controller with integrated PHY
+    - One high-speed USB 3.0 port
+ - USB 2.0
+    - One USB 2.0 controller with ULPI interface
+ - Two enhanced secure digital host controllers:
+    - SDHC1 controller can be connected to onboard SDHC connector
+    - SDHC2 controller: 1-/4-bit SD/MMC card supporting 1.8 V devices
+ - 2 I2C controllers
+ - One SATA onboard connectors
+ - UART
+ - 5 SAI
+    - One SAI port with audio codec SGTL5000:
+	• Provides MIC bias
+	• Provides headphone and line output
+    - One SAI port terminated at 2x6 header
+    - Three SAI Tx/Rx ports terminated at 2x3 headers
+ - ARM JTAG support
+
+Booting Options
+---------------
+a) QSPI Flash Emu Boot
+b) QSPI Flash 1
+c) QSPI Flash 2
+
+QSPI flash map
+--------------
+Images		| Size	|QSPI Flash Address
+------------------------------------------
+RCW + PBI	| 1MB	| 0x4000_0000
+U-boot 		| 1MB	| 0x4010_0000
+U-boot Env 	| 1MB	| 0x4020_0000
+PPA FIT image	| 2MB	| 0x4050_0000
+Linux ITB	| ~53MB | 0x40A0_0000
diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c
new file mode 100644
index 0000000000..71eea82a03
--- /dev/null
+++ b/board/freescale/ls1012aqds/ls1012aqds.c
@@ -0,0 +1,234 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <fdt_support.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/fdt.h>
+#include <asm/arch/soc.h>
+#include <ahci.h>
+#include <hwconfig.h>
+#include <mmc.h>
+#include <scsi.h>
+#include <fm_eth.h>
+#include <fsl_csu.h>
+#include <fsl_esdhc.h>
+#include <fsl_mmdc.h>
+#include <spl.h>
+#include <netdev.h>
+
+#include "../common/qixis.h"
+#include "ls1012aqds_qixis.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void set_wait_for_bits_clear(void *ptr, u32 value, u32 bits)
+{
+	int timeout = 1000;
+
+	out_be32(ptr, value);
+
+	while (in_be32(ptr) & bits) {
+		udelay(100);
+		timeout--;
+	}
+	if (timeout <= 0)
+		puts("Error: wait for clear timeout.\n");
+}
+
+int checkboard(void)
+{
+	char buf[64];
+	u8 sw;
+
+	sw = QIXIS_READ(arch);
+	printf("Board Arch: V%d, ", sw >> 4);
+	printf("Board version: %c, boot from ", (sw & 0xf) + 'A' - 1);
+
+	sw = QIXIS_READ(brdcfg[QIXIS_LBMAP_BRDCFG_REG]);
+
+	if (sw & QIXIS_LBMAP_ALTBANK)
+		printf("flash: 2\n");
+	else
+		printf("flash: 1\n");
+
+	printf("FPGA: v%d (%s), build %d",
+	       (int)QIXIS_READ(scver), qixis_read_tag(buf),
+	       (int)qixis_read_minor());
+
+	/* the timestamp string contains "\n" at the end */
+	printf(" on %s", qixis_read_time(buf));
+	return 0;
+}
+
+void mmdc_init(void)
+{
+	struct mmdc_p_regs *mmdc =
+		(struct mmdc_p_regs *)CONFIG_SYS_FSL_DDR_ADDR;
+
+	out_be32(&mmdc->mdscr, CONFIGURATION_REQ);
+
+	/* configure timing parms */
+	out_be32(&mmdc->mdotc,  CONFIG_SYS_MMDC_CORE_ODT_TIMING);
+	out_be32(&mmdc->mdcfg0, CONFIG_SYS_MMDC_CORE_TIMING_CFG_0);
+	out_be32(&mmdc->mdcfg1, CONFIG_SYS_MMDC_CORE_TIMING_CFG_1);
+	out_be32(&mmdc->mdcfg2, CONFIG_SYS_MMDC_CORE_TIMING_CFG_2);
+
+	/* other parms	*/
+	out_be32(&mmdc->mdmisc,    CONFIG_SYS_MMDC_CORE_MISC);
+	out_be32(&mmdc->mpmur0,    CONFIG_SYS_MMDC_PHY_MEASURE_UNIT);
+	out_be32(&mmdc->mdrwd,     CONFIG_SYS_MMDC_CORE_RDWR_CMD_DELAY);
+	out_be32(&mmdc->mpodtctrl, CONFIG_SYS_MMDC_PHY_ODT_CTRL);
+
+	/* out of reset delays */
+	out_be32(&mmdc->mdor,  CONFIG_SYS_MMDC_CORE_OUT_OF_RESET_DELAY);
+
+	/* physical parms */
+	out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_1);
+	out_be32(&mmdc->mdasp, CONFIG_SYS_MMDC_CORE_ADDR_PARTITION);
+
+       /* Enable MMDC */
+	out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_2);
+
+	/* dram init sequence: update MRs */
+	out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x8) | CONFIGURATION_REQ |
+				CMD_LOAD_MODE_REG | CMD_BANK_ADDR_2));
+	out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
+				CMD_BANK_ADDR_3));
+	out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
+				CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1));
+	out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x19) |
+				CMD_ADDR_LSB_MR_ADDR(0x30) | CONFIGURATION_REQ |
+				CMD_LOAD_MODE_REG | CMD_BANK_ADDR_0));
+
+       /* dram init sequence: ZQCL */
+	out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
+				CMD_ZQ_CALIBRATION | CMD_BANK_ADDR_0));
+	set_wait_for_bits_clear(&mmdc->mpzqhwctrl,
+				CONFIG_SYS_MMDC_PHY_ZQ_HW_CTRL,
+				FORCE_ZQ_AUTO_CALIBRATION);
+
+       /* Calibrations now: wr lvl */
+	out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x84) |
+				CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
+				CMD_BANK_ADDR_1));
+	out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | WL_EN | CMD_NORMAL));
+	set_wait_for_bits_clear(&mmdc->mpwlgcr, WR_LVL_HW_EN, WR_LVL_HW_EN);
+
+	mdelay(1);
+
+	out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
+				CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1));
+	out_be32(&mmdc->mdscr, CONFIGURATION_REQ);
+
+	mdelay(1);
+
+       /* Calibrations now: Read DQS gating calibration */
+	out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
+				CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0));
+	out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
+				CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3));
+	out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN);
+	out_be32(&mmdc->mprddlctl, CONFIG_SYS_MMDC_PHY_RD_DLY_LINES_CFG);
+	set_wait_for_bits_clear(&mmdc->mpdgctrl0,
+				AUTO_RD_DQS_GATING_CALIBRATION_EN,
+				AUTO_RD_DQS_GATING_CALIBRATION_EN);
+
+	out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
+				CMD_BANK_ADDR_3));
+
+       /* Calibrations now: Read calibration */
+	out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
+				CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0));
+	out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
+				CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3));
+	out_be32(&mmdc->mppdcmpr2,  MPR_COMPARE_EN);
+	set_wait_for_bits_clear(&mmdc->mprddlhwctl,
+				AUTO_RD_CALIBRATION_EN,
+				AUTO_RD_CALIBRATION_EN);
+
+	out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
+				CMD_BANK_ADDR_3));
+
+       /* PD, SR */
+	out_be32(&mmdc->mdpdc, CONFIG_SYS_MMDC_CORE_PWR_DOWN_CTRL);
+	out_be32(&mmdc->mapsr, CONFIG_SYS_MMDC_CORE_PWR_SAV_CTRL_STAT);
+
+       /* refresh scheme */
+	set_wait_for_bits_clear(&mmdc->mdref,
+				CONFIG_SYS_MMDC_CORE_REFRESH_CTL,
+				START_REFRESH);
+
+       /* disable CON_REQ */
+	out_be32(&mmdc->mdscr, DISABLE_CFG_REQ);
+}
+
+int dram_init(void)
+{
+	mmdc_init();
+
+	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+
+	return 0;
+}
+
+int board_early_init_f(void)
+{
+	fsl_lsch2_early_init_f();
+
+	return 0;
+}
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+	u8 mux_sdhc_cd = 0x80;
+
+	i2c_set_bus_num(0);
+
+	i2c_write(CONFIG_SYS_I2C_FPGA_ADDR, 0x5a, 1, &mux_sdhc_cd, 1);
+	return 0;
+}
+#endif
+
+int board_init(void)
+{
+	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)
+				   CONFIG_SYS_CCI400_ADDR;
+
+	/* Set CCI-400 control override register to enable barrier
+	 * transaction */
+	out_le32(&cci->ctrl_ord,
+		 CCI400_CTRLORD_EN_BARRIER);
+
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+	enable_layerscape_ns_access();
+#endif
+
+#ifdef CONFIG_ENV_IS_NOWHERE
+	gd->env_addr = (ulong)&default_environment[0];
+#endif
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
+
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
+{
+	arch_fixup_fdt(blob);
+
+	ft_cpu_setup(blob, bd);
+
+	return 0;
+}
+#endif
diff --git a/board/freescale/ls1012aqds/ls1012aqds_qixis.h b/board/freescale/ls1012aqds/ls1012aqds_qixis.h
new file mode 100644
index 0000000000..584f604aa8
--- /dev/null
+++ b/board/freescale/ls1012aqds/ls1012aqds_qixis.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __LS1043AQDS_QIXIS_H__
+#define __LS1043AQDS_QIXIS_H__
+
+/* Definitions of QIXIS Registers for LS1043AQDS */
+
+/* BRDCFG4[4:7] select EC1 and EC2 as a pair */
+#define BRDCFG4_EMISEL_MASK		0xe0
+#define BRDCFG4_EMISEL_SHIFT		5
+
+/* SYSCLK */
+#define QIXIS_SYSCLK_66			0x0
+#define QIXIS_SYSCLK_83			0x1
+#define QIXIS_SYSCLK_100		0x2
+#define QIXIS_SYSCLK_125		0x3
+#define QIXIS_SYSCLK_133		0x4
+
+/* DDRCLK */
+#define QIXIS_DDRCLK_66			0x0
+#define QIXIS_DDRCLK_100		0x1
+#define QIXIS_DDRCLK_125		0x2
+#define QIXIS_DDRCLK_133		0x3
+
+/* BRDCFG2 - SD clock*/
+#define QIXIS_SDCLK1_100		0x0
+#define QIXIS_SDCLK1_125		0x1
+#define QIXIS_SDCLK1_165		0x2
+#define QIXIS_SDCLK1_100_SP		0x3
+
+#endif
diff --git a/board/freescale/ls1012ardb/Kconfig b/board/freescale/ls1012ardb/Kconfig
new file mode 100644
index 0000000000..3f67c2841f
--- /dev/null
+++ b/board/freescale/ls1012ardb/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_LS1012ARDB
+
+config SYS_BOARD
+	default "ls1012ardb"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_SOC
+	default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+	default "ls1012ardb"
+
+endif
diff --git a/board/freescale/ls1012ardb/MAINTAINERS b/board/freescale/ls1012ardb/MAINTAINERS
new file mode 100644
index 0000000000..79a2a7dd24
--- /dev/null
+++ b/board/freescale/ls1012ardb/MAINTAINERS
@@ -0,0 +1,6 @@
+LS1012ARDB BOARD
+M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
+S:	Maintained
+F:	board/freescale/ls1012ardb/
+F:	include/configs/ls1012ardb.h
+F:	configs/ls1012ardb_qspi_defconfig
diff --git a/board/freescale/ls1012ardb/Makefile b/board/freescale/ls1012ardb/Makefile
new file mode 100644
index 0000000000..05fa9d9c5b
--- /dev/null
+++ b/board/freescale/ls1012ardb/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright 2016 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-y += ls1012ardb.o
diff --git a/board/freescale/ls1012ardb/README b/board/freescale/ls1012ardb/README
new file mode 100644
index 0000000000..453b432915
--- /dev/null
+++ b/board/freescale/ls1012ardb/README
@@ -0,0 +1,54 @@
+Overview
+--------
+QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance
+development platform, with a complete debugging environment.
+The LS1012ARDB board supports the QorIQ LS1012A processor and is
+optimized to support the high-bandwidth DDR3L memory and
+a full complement of high-speed SerDes ports.
+
+LS1012A SoC Overview
+--------------------
+Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A
+SoC overview.
+
+LS1012ARDB board Overview
+-----------------------
+ - SERDES Connections, 4 lanes supporting:
+      - PCI Express - 3.0
+      - SGMII, SGMII 2.5
+      - SATA 3.0
+ - DDR Controller
+     - 16-bit, 1 GB DDR3L SDRAM memory, running at data rates up to 1 GT/s
+ -QSPI: A dual 1:3 switch, NX3L4357GM,115 (U35) drives the QSPI chip-select
+ signals to
+    - QSPI NOR flash memory (2 virtual banks)
+    - the QSPI emulator.s
+ - USB 3.0
+    - one high-speed USB 2.0/3.0 port.
+ - Two enhanced secure digital host controllers:
+    - SDHC1 controller can be connected to onboard SDHC connector
+    - SDHC2 controller: Three dual 1:4 mux/demux devices,
+    74CBTLV3253DS (U30, U31, U33) drive the SDHC2 signals to eMMC,
+    SDIO WiFi, SPI, and Ardiuno shield
+ - 2 I2C controllers
+ - One SATA onboard connectors
+ - UART
+   - The LS1012A processor consists of two UART controllers,
+   out of which only UART1 is used on RDB.
+ - ARM JTAG support
+
+Booting Options
+---------------
+a) QSPI Flash Emu Boot
+b) QSPI Flash 1
+c) QSPI Flash 2
+
+QSPI flash map
+--------------
+Images		| Size	|QSPI Flash Address
+------------------------------------------
+RCW + PBI	| 1MB	| 0x4000_0000
+U-boot 		| 1MB	| 0x4010_0000
+U-boot Env 	| 1MB	| 0x4020_0000
+PPA FIT image	| 2MB	| 0x4050_0000
+Linux ITB	| ~53MB | 0x40A0_0000
diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c
new file mode 100644
index 0000000000..f69768d24e
--- /dev/null
+++ b/board/freescale/ls1012ardb/ls1012ardb.c
@@ -0,0 +1,224 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/soc.h>
+#include <hwconfig.h>
+#include <ahci.h>
+#include <mmc.h>
+#include <scsi.h>
+#include <fsl_csu.h>
+#include <fsl_esdhc.h>
+#include <environment.h>
+#include <fsl_mmdc.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void set_wait_for_bits_clear(void *ptr, u32 value, u32 bits)
+{
+	int timeout = 1000;
+
+	out_be32(ptr, value);
+
+	while (in_be32(ptr) & bits) {
+		udelay(100);
+		timeout--;
+	}
+	if (timeout <= 0)
+		puts("Error: wait for clear timeout.\n");
+}
+
+int checkboard(void)
+{
+	u8 in1;
+
+	puts("Board: LS1012ARDB ");
+
+	/* Initialize i2c early for Serial flash bank information */
+	i2c_set_bus_num(0);
+
+	if (i2c_read(I2C_MUX_IO1_ADDR, 1, 1, &in1, 1) < 0) {
+		printf("Error reading i2c boot information!\n");
+		return 0; /* Don't want to hang() on this error */
+	}
+
+	puts("Version");
+	if ((in1 & (~__SW_REV_MASK)) == __SW_REV_A)
+		puts(": RevA");
+	else if ((in1 & (~__SW_REV_MASK)) == __SW_REV_B)
+		puts(": RevB");
+	else
+		puts(": unknown");
+
+	printf(", boot from QSPI");
+	if ((in1 & (~__SW_BOOT_MASK)) == __SW_BOOT_EMU)
+		puts(": emu\n");
+	else if ((in1 & (~__SW_BOOT_MASK)) == __SW_BOOT_BANK1)
+		puts(": bank1\n");
+	else if ((in1 & (~__SW_BOOT_MASK)) == __SW_BOOT_BANK2)
+		puts(": bank2\n");
+	else
+		puts("unknown\n");
+
+	return 0;
+}
+
+void mmdc_init(void)
+{
+	struct mmdc_p_regs *mmdc =
+		(struct mmdc_p_regs *)CONFIG_SYS_FSL_DDR_ADDR;
+
+	out_be32(&mmdc->mdscr, CONFIGURATION_REQ);
+
+	/* configure timing parms */
+	out_be32(&mmdc->mdotc,  CONFIG_SYS_MMDC_CORE_ODT_TIMING);
+	out_be32(&mmdc->mdcfg0, CONFIG_SYS_MMDC_CORE_TIMING_CFG_0);
+	out_be32(&mmdc->mdcfg1, CONFIG_SYS_MMDC_CORE_TIMING_CFG_1);
+	out_be32(&mmdc->mdcfg2, CONFIG_SYS_MMDC_CORE_TIMING_CFG_2);
+
+	/* other parms	*/
+	out_be32(&mmdc->mdmisc,    CONFIG_SYS_MMDC_CORE_MISC);
+	out_be32(&mmdc->mpmur0,    CONFIG_SYS_MMDC_PHY_MEASURE_UNIT);
+	out_be32(&mmdc->mdrwd,     CONFIG_SYS_MMDC_CORE_RDWR_CMD_DELAY);
+	out_be32(&mmdc->mpodtctrl, CONFIG_SYS_MMDC_PHY_ODT_CTRL);
+
+	/* out of reset delays */
+	out_be32(&mmdc->mdor,  CONFIG_SYS_MMDC_CORE_OUT_OF_RESET_DELAY);
+
+	/* physical parms */
+	out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_1);
+	out_be32(&mmdc->mdasp, CONFIG_SYS_MMDC_CORE_ADDR_PARTITION);
+
+       /* Enable MMDC */
+	out_be32(&mmdc->mdctl, CONFIG_SYS_MMDC_CORE_CONTROL_2);
+
+	/* dram init sequence: update MRs */
+	out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x8) | CONFIGURATION_REQ |
+				CMD_LOAD_MODE_REG | CMD_BANK_ADDR_2));
+	out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
+				CMD_BANK_ADDR_3));
+	out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
+				CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1));
+	out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x19) |
+				CMD_ADDR_LSB_MR_ADDR(0x30) | CONFIGURATION_REQ |
+				CMD_LOAD_MODE_REG | CMD_BANK_ADDR_0));
+
+       /* dram init sequence: ZQCL */
+	out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
+				CMD_ZQ_CALIBRATION | CMD_BANK_ADDR_0));
+	set_wait_for_bits_clear(&mmdc->mpzqhwctrl,
+				CONFIG_SYS_MMDC_PHY_ZQ_HW_CTRL,
+				FORCE_ZQ_AUTO_CALIBRATION);
+
+       /* Calibrations now: wr lvl */
+	out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x84) |
+				CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
+				CMD_BANK_ADDR_1));
+	out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | WL_EN | CMD_NORMAL));
+	set_wait_for_bits_clear(&mmdc->mpwlgcr, WR_LVL_HW_EN, WR_LVL_HW_EN);
+
+	mdelay(1);
+
+	out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
+				CMD_LOAD_MODE_REG | CMD_BANK_ADDR_1));
+	out_be32(&mmdc->mdscr, CONFIGURATION_REQ);
+
+	mdelay(1);
+
+       /* Calibrations now: Read DQS gating calibration */
+	out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
+				CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0));
+	out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
+				CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3));
+	out_be32(&mmdc->mppdcmpr2, MPR_COMPARE_EN);
+	out_be32(&mmdc->mprddlctl, CONFIG_SYS_MMDC_PHY_RD_DLY_LINES_CFG);
+	set_wait_for_bits_clear(&mmdc->mpdgctrl0,
+				AUTO_RD_DQS_GATING_CALIBRATION_EN,
+				AUTO_RD_DQS_GATING_CALIBRATION_EN);
+
+	out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
+				CMD_BANK_ADDR_3));
+
+       /* Calibrations now: Read calibration */
+	out_be32(&mmdc->mdscr, (CMD_ADDR_MSB_MR_OP(0x4) | CONFIGURATION_REQ |
+				CMD_PRECHARGE_BANK_OPEN | CMD_BANK_ADDR_0));
+	out_be32(&mmdc->mdscr, (CMD_ADDR_LSB_MR_ADDR(0x4) | CONFIGURATION_REQ |
+				CMD_LOAD_MODE_REG | CMD_BANK_ADDR_3));
+	out_be32(&mmdc->mppdcmpr2,  MPR_COMPARE_EN);
+	set_wait_for_bits_clear(&mmdc->mprddlhwctl,
+				AUTO_RD_CALIBRATION_EN,
+				AUTO_RD_CALIBRATION_EN);
+
+	out_be32(&mmdc->mdscr, (CONFIGURATION_REQ | CMD_LOAD_MODE_REG |
+				CMD_BANK_ADDR_3));
+
+       /* PD, SR */
+	out_be32(&mmdc->mdpdc, CONFIG_SYS_MMDC_CORE_PWR_DOWN_CTRL);
+	out_be32(&mmdc->mapsr, CONFIG_SYS_MMDC_CORE_PWR_SAV_CTRL_STAT);
+
+       /* refresh scheme */
+	set_wait_for_bits_clear(&mmdc->mdref,
+				CONFIG_SYS_MMDC_CORE_REFRESH_CTL,
+				START_REFRESH);
+
+       /* disable CON_REQ */
+	out_be32(&mmdc->mdscr, DISABLE_CFG_REQ);
+}
+
+int dram_init(void)
+{
+	mmdc_init();
+
+	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
+
+int board_early_init_f(void)
+{
+	fsl_lsch2_early_init_f();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
+	/*
+	 * Set CCI-400 control override register to enable barrier
+	 * transaction
+	 */
+	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
+
+#ifdef CONFIG_ENV_IS_NOWHERE
+	gd->env_addr = (ulong)&default_environment[0];
+#endif
+
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+	enable_layerscape_ns_access();
+#endif
+
+	return 0;
+}
+
+int ft_board_setup(void *blob, bd_t *bd)
+{
+	arch_fixup_fdt(blob);
+
+	ft_cpu_setup(blob, bd);
+
+	return 0;
+}
diff --git a/board/freescale/ls1021aqds/ddr.h b/board/freescale/ls1021aqds/ddr.h
index f819c99dba..b39b561dc1 100644
--- a/board/freescale/ls1021aqds/ddr.h
+++ b/board/freescale/ls1021aqds/ddr.h
@@ -31,21 +31,21 @@ static const struct board_specific_parameters udimm0[] = {
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
 	 */
 #ifdef CONFIG_SYS_FSL_DDR4
-	{2,  1666, 0, 4,     7, 0x0808090B, 0x0C0D0E0A,},
-	{2,  1900, 0, 4,     6, 0x08080A0C, 0x0D0E0F0A,},
-	{1,  1666, 0, 4,     8, 0x090A0B0B, 0x0C0D0E0C,},
-	{1,  1900, 0, 4,     9, 0x0A0B0C0B, 0x0D0E0F0D,},
-	{1,  2200, 0, 4,    10, 0x0B0C0D0C, 0x0E0F110E,},
+	{2,  1666, 0, 8,     7, 0x0808090B, 0x0C0D0E0A,},
+	{2,  1900, 0, 8,     6, 0x08080A0C, 0x0D0E0F0A,},
+	{1,  1666, 0, 8,     8, 0x090A0B0B, 0x0C0D0E0C,},
+	{1,  1900, 0, 8,     9, 0x0A0B0C0B, 0x0D0E0F0D,},
+	{1,  2200, 0, 8,    10, 0x0B0C0D0C, 0x0E0F110E,},
 #elif defined(CONFIG_SYS_FSL_DDR3)
-	{1,  833,  1, 6,     8, 0x06060607, 0x08080807,   0x1f,    2,  0},
-	{1,  1350, 1, 6,     8, 0x0708080A, 0x0A0B0C09,   0x1f,    2,  0},
-	{1,  833,  2, 6,     8, 0x06060607, 0x08080807,   0x1f,    2,  0},
-	{1,  1350, 2, 6,     8, 0x0708080A, 0x0A0B0C09,   0x1f,    2,  0},
-	{2,  833,  4, 6,     8, 0x06060607, 0x08080807,   0x1f,    2,  0},
-	{2,  1350, 4, 6,     8, 0x0708080A, 0x0A0B0C09,   0x1f,    2,  0},
-	{2,  1350, 0, 6,     8, 0x0708080A, 0x0A0B0C09,   0x1f,    2,  0},
-	{2,  1666, 4, 4,   0xa, 0x0B08090C, 0x0B0E0D0A,   0x1f,    2,  0},
-	{2,  1666, 0, 4,   0xa, 0x0B08090C, 0x0B0E0D0A,   0x1f,    2,  0},
+	{1,  833,  1, 12,     8, 0x06060607, 0x08080807,   0x1f,    2,  0},
+	{1,  1350, 1, 12,     8, 0x0708080A, 0x0A0B0C09,   0x1f,    2,  0},
+	{1,  833,  2, 12,     8, 0x06060607, 0x08080807,   0x1f,    2,  0},
+	{1,  1350, 2, 12,     8, 0x0708080A, 0x0A0B0C09,   0x1f,    2,  0},
+	{2,  833,  4, 12,     8, 0x06060607, 0x08080807,   0x1f,    2,  0},
+	{2,  1350, 4, 12,     8, 0x0708080A, 0x0A0B0C09,   0x1f,    2,  0},
+	{2,  1350, 0, 12,     8, 0x0708080A, 0x0A0B0C09,   0x1f,    2,  0},
+	{2,  1666, 4, 8,    0xa, 0x0B08090C, 0x0B0E0D0A,   0x1f,    2,  0},
+	{2,  1666, 0, 8,    0xa, 0x0B08090C, 0x0B0E0D0A,   0x1f,    2,  0},
 #else
 #error DDR type not defined
 #endif
diff --git a/board/freescale/ls1043aqds/README b/board/freescale/ls1043aqds/README
index a6fd7a35f5..913537d451 100644
--- a/board/freescale/ls1043aqds/README
+++ b/board/freescale/ls1043aqds/README
@@ -8,41 +8,8 @@ debugging environment.
 
 LS1043A SoC Overview
 --------------------
-The LS1043A integrated multicore processor combines four ARM Cortex-A53
-processor cores with datapath acceleration optimized for L2/3 packet
-processing, single pass security offload and robust traffic management
-and quality of service.
-
-The LS1043A SoC includes the following function and features:
- - Four 64-bit ARM Cortex-A53 CPUs
- - 1 MB unified L2 Cache
- - One 32-bit DDR3L/DDR4 SDRAM memory controllers with ECC and interleaving
-   support
- - Data Path Acceleration Architecture (DPAA) incorporating acceleration the
-   the following functions:
-   - Packet parsing, classification, and distribution (FMan)
-   - Queue management for scheduling, packet sequencing, and congestion
-     management (QMan)
-   - Hardware buffer management for buffer allocation and de-allocation (BMan)
-   - Cryptography acceleration (SEC)
- - Ethernet interfaces by FMan
-   - Up to 1 x XFI supporting 10G interface
-   - Up to 1 x QSGMII
-   - Up to 4 x SGMII supporting 1000Mbps
-   - Up to 2 x SGMII supporting 2500Mbps
-   - Up to 2 x RGMII supporting 1000Mbps
- - High-speed peripheral interfaces
-   - Three PCIe 2.0 controllers, one supporting x4 operation
-   - One serial ATA (SATA 3.0) controllers
- - Additional peripheral interfaces
-   - Three high-speed USB 3.0 controllers with integrated PHY
-   - Enhanced secure digital host controller (eSDXC/eMMC)
-   - Quad Serial Peripheral Interface (QSPI) Controller
-   - Serial peripheral interface (SPI) controller
-   - Four I2C controllers
-   - Two DUARTs
-   - Integrated flash controller supporting NAND and NOR flash
- - QorIQ platform's trust architecture 2.1
+Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1043A
+SoC overview.
 
  LS1043AQDS board Overview
  -----------------------
diff --git a/board/freescale/ls1043aqds/ddr.c b/board/freescale/ls1043aqds/ddr.c
index 3d3c53385a..0fd835d74f 100644
--- a/board/freescale/ls1043aqds/ddr.c
+++ b/board/freescale/ls1043aqds/ddr.c
@@ -116,6 +116,7 @@ phys_size_t initdram(int board_type)
 
 	dram_size = fsl_ddr_sdram();
 #endif
+	erratum_a008850_post();
 
 #ifdef CONFIG_FSL_DEEP_SLEEP
 	fsl_dp_ddr_restore();
diff --git a/board/freescale/ls1043aqds/ddr.h b/board/freescale/ls1043aqds/ddr.h
index 8adb660012..ad709ba216 100644
--- a/board/freescale/ls1043aqds/ddr.h
+++ b/board/freescale/ls1043aqds/ddr.h
@@ -7,6 +7,8 @@
 #ifndef __DDR_H__
 #define __DDR_H__
 
+extern void erratum_a008850_post(void);
+
 struct board_specific_parameters {
 	u32 n_ranks;
 	u32 datarate_mhz_high;
@@ -32,21 +34,21 @@ static const struct board_specific_parameters udimm0[] = {
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
 	 */
 #ifdef CONFIG_SYS_FSL_DDR4
-	{2,  1666, 0, 4,     7, 0x0808090B, 0x0C0D0E0A,},
-	{2,  1900, 0, 4,     6, 0x08080A0C, 0x0D0E0F0A,},
-	{1,  1666, 0, 4,     6, 0x0708090B, 0x0C0D0E0A,},
-	{1,  1900, 0, 4,     9, 0x0A0B0C0B, 0x0D0E0F0D,},
-	{1,  2200, 0, 4,    10, 0x0B0C0D0C, 0x0E0F110E,},
+	{2,  1666, 0,  8,     7, 0x0808090B, 0x0C0D0E0A,},
+	{2,  1900, 0,  8,     6, 0x08080A0C, 0x0D0E0F0A,},
+	{1,  1666, 0,  8,     6, 0x0708090B, 0x0C0D0E0A,},
+	{1,  1900, 0,  8,     9, 0x0A0B0C0B, 0x0D0E0F0D,},
+	{1,  2200, 0,  8,    10, 0x0B0C0D0C, 0x0E0F110E,},
 #elif defined(CONFIG_SYS_FSL_DDR3)
-	{1,  833,  1, 6,     8, 0x06060607, 0x08080807,   0x1f,    2,  0},
-	{1,  1350, 1, 6,     8, 0x0708080A, 0x0A0B0C09,   0x1f,    2,  0},
-	{1,  833,  2, 6,     8, 0x06060607, 0x08080807,   0x1f,    2,  0},
-	{1,  1350, 2, 6,     8, 0x0708080A, 0x0A0B0C09,   0x1f,    2,  0},
-	{2,  833,  4, 6,     8, 0x06060607, 0x08080807,   0x1f,    2,  0},
-	{2,  1350, 4, 6,     8, 0x0708080A, 0x0A0B0C09,   0x1f,    2,  0},
-	{2,  1350, 0, 6,     8, 0x0708080A, 0x0A0B0C09,   0x1f,    2,  0},
-	{2,  1666, 4, 4,   0xa, 0x0B08090C, 0x0B0E0D0A,   0x1f,    2,  0},
-	{2,  1666, 0, 4,   0xa, 0x0B08090C, 0x0B0E0D0A,   0x1f,    2,  0},
+	{1,  833,  1, 12,     8, 0x06060607, 0x08080807,   0x1f,    2,  0},
+	{1,  1350, 1, 12,     8, 0x0708080A, 0x0A0B0C09,   0x1f,    2,  0},
+	{1,  833,  2, 12,     8, 0x06060607, 0x08080807,   0x1f,    2,  0},
+	{1,  1350, 2, 12,     8, 0x0708080A, 0x0A0B0C09,   0x1f,    2,  0},
+	{2,  833,  4, 12,     8, 0x06060607, 0x08080807,   0x1f,    2,  0},
+	{2,  1350, 4, 12,     8, 0x0708080A, 0x0A0B0C09,   0x1f,    2,  0},
+	{2,  1350, 0, 12,     8, 0x0708080A, 0x0A0B0C09,   0x1f,    2,  0},
+	{2,  1666, 4,  8,   0xa, 0x0B08090C, 0x0B0E0D0A,   0x1f,    2,  0},
+	{2,  1666, 0,  8,   0xa, 0x0B08090C, 0x0B0E0D0A,   0x1f,    2,  0},
 #else
 #error DDR type not defined
 #endif
diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c
index fba6b88951..7e47ef0d82 100644
--- a/board/freescale/ls1043aqds/ls1043aqds.c
+++ b/board/freescale/ls1043aqds/ls1043aqds.c
@@ -238,8 +238,8 @@ int board_early_init_f(void)
 	out_be32(&scfg->rcwpmuxcr0, 0x3333);
 	out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1);
 	usb_pwrfault =
-		(SCFG_USBPWRFAULT_SHARED << SCFG_USBPWRFAULT_USB3_SHIFT) |
-		(SCFG_USBPWRFAULT_SHARED << SCFG_USBPWRFAULT_USB2_SHIFT) |
+		(SCFG_USBPWRFAULT_DEDICATED << SCFG_USBPWRFAULT_USB3_SHIFT) |
+		(SCFG_USBPWRFAULT_DEDICATED << SCFG_USBPWRFAULT_USB2_SHIFT) |
 		(SCFG_USBPWRFAULT_SHARED << SCFG_USBPWRFAULT_USB1_SHIFT);
 	out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault);
 #endif
@@ -307,14 +307,6 @@ int misc_init_r(void)
 
 int board_init(void)
 {
-	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)
-				   CONFIG_SYS_CCI400_ADDR;
-
-	/* Set CCI-400 control override register to enable barrier
-	 * transaction */
-	out_le32(&cci->ctrl_ord,
-		 CCI400_CTRLORD_EN_BARRIER);
-
 	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
 	board_retimer_init();
 
@@ -325,10 +317,6 @@ int board_init(void)
 #ifdef CONFIG_LAYERSCAPE_NS_ACCESS
 	enable_layerscape_ns_access();
 #endif
-
-#ifdef CONFIG_ENV_IS_NOWHERE
-	gd->env_addr = (ulong)&default_environment[0];
-#endif
 	return 0;
 }
 
diff --git a/board/freescale/ls1043ardb/README b/board/freescale/ls1043ardb/README
index 0556e73b3a..709ddbbef3 100644
--- a/board/freescale/ls1043ardb/README
+++ b/board/freescale/ls1043ardb/README
@@ -8,41 +8,8 @@ debugging environment. The LS1043A RDB is lead-free and RoHS-compliant.
 
 LS1043A SoC Overview
 --------------------
-The LS1043A integrated multicore processor combines four ARM Cortex-A53
-processor cores with datapath acceleration optimized for L2/3 packet
-processing, single pass security offload and robust traffic management
-and quality of service.
-
-The LS1043A SoC includes the following function and features:
- - Four 64-bit ARM Cortex-A53 CPUs
- - 1 MB unified L2 Cache
- - One 32-bit DDR3L/DDR4 SDRAM memory controllers with ECC and interleaving
-   support
- - Data Path Acceleration Architecture (DPAA) incorporating acceleration the
-   the following functions:
-   - Packet parsing, classification, and distribution (FMan)
-   - Queue management for scheduling, packet sequencing, and congestion
-     management (QMan)
-   - Hardware buffer management for buffer allocation and de-allocation (BMan)
-   - Cryptography acceleration (SEC)
- - Ethernet interfaces by FMan
-   - Up to 1 x XFI supporting 10G interface
-   - Up to 1 x QSGMII
-   - Up to 4 x SGMII supporting 1000Mbps
-   - Up to 2 x SGMII supporting 2500Mbps
-   - Up to 2 x RGMII supporting 1000Mbps
- - High-speed peripheral interfaces
-   - Three PCIe 2.0 controllers, one supporting x4 operation
-   - One serial ATA (SATA 3.0) controllers
- - Additional peripheral interfaces
-   - Three high-speed USB 3.0 controllers with integrated PHY
-   - Enhanced secure digital host controller (eSDXC/eMMC)
-   - Quad Serial Peripheral Interface (QSPI) Controller
-   - Serial peripheral interface (SPI) controller
-   - Four I2C controllers
-   - Two DUARTs
-   - Integrated flash controller supporting NAND and NOR flash
- - QorIQ platform's trust architecture 2.1
+Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1043A
+SoC overview.
 
  LS1043ARDB board Overview
  -----------------------
diff --git a/board/freescale/ls1043ardb/cpld.c b/board/freescale/ls1043ardb/cpld.c
index 78c28246a8..c6452830ed 100644
--- a/board/freescale/ls1043ardb/cpld.c
+++ b/board/freescale/ls1043ardb/cpld.c
@@ -28,10 +28,18 @@ void cpld_write(unsigned int reg, u8 value)
 /* Set the boot bank to the alternate bank */
 void cpld_set_altbank(void)
 {
+	u16 reg = CPLD_CFG_RCW_SRC_NOR;
 	u8 reg4 = CPLD_READ(soft_mux_on);
+	u8 reg5 = (u8)(reg >> 1);
+	u8 reg6 = (u8)(reg & 1);
 	u8 reg7 = CPLD_READ(vbank);
 
-	CPLD_WRITE(soft_mux_on, reg4 | CPLD_SW_MUX_BANK_SEL);
+	cpld_rev_bit(&reg5);
+
+	CPLD_WRITE(soft_mux_on, reg4 | CPLD_SW_MUX_BANK_SEL | 1);
+
+	CPLD_WRITE(cfg_rcw_src1, reg5);
+	CPLD_WRITE(cfg_rcw_src2, reg6);
 
 	reg7 = (reg7 & ~CPLD_BANK_SEL_MASK) | CPLD_BANK_SEL_ALTBANK;
 	CPLD_WRITE(vbank, reg7);
@@ -42,7 +50,21 @@ void cpld_set_altbank(void)
 /* Set the boot bank to the default bank */
 void cpld_set_defbank(void)
 {
-	CPLD_WRITE(global_rst, 1);
+	u16 reg = CPLD_CFG_RCW_SRC_NOR;
+	u8 reg4 = CPLD_READ(soft_mux_on);
+	u8 reg5 = (u8)(reg >> 1);
+	u8 reg6 = (u8)(reg & 1);
+
+	cpld_rev_bit(&reg5);
+
+	CPLD_WRITE(soft_mux_on, reg4 | CPLD_SW_MUX_BANK_SEL | 1);
+
+	CPLD_WRITE(cfg_rcw_src1, reg5);
+	CPLD_WRITE(cfg_rcw_src2, reg6);
+
+	CPLD_WRITE(vbank, 0);
+
+	CPLD_WRITE(system_rst, 1);
 }
 
 void cpld_set_nand(void)
diff --git a/board/freescale/ls1043ardb/cpld.h b/board/freescale/ls1043ardb/cpld.h
index bd59c0e5d5..cb175b56fa 100644
--- a/board/freescale/ls1043ardb/cpld.h
+++ b/board/freescale/ls1043ardb/cpld.h
@@ -40,6 +40,7 @@ void cpld_rev_bit(unsigned char *value);
 #define CPLD_SW_MUX_BANK_SEL	0x40
 #define CPLD_BANK_SEL_MASK	0x07
 #define CPLD_BANK_SEL_ALTBANK	0x04
+#define CPLD_CFG_RCW_SRC_NOR	0x025
 #define CPLD_CFG_RCW_SRC_NAND	0x106
 #define CPLD_CFG_RCW_SRC_SD	0x040
 #endif
diff --git a/board/freescale/ls1043ardb/ddr.c b/board/freescale/ls1043ardb/ddr.c
index 11bc0f24d9..1e2fd2ed0c 100644
--- a/board/freescale/ls1043ardb/ddr.c
+++ b/board/freescale/ls1043ardb/ddr.c
@@ -177,6 +177,8 @@ phys_size_t initdram(int board_type)
 #else
 	dram_size =  fsl_ddr_sdram_size();
 #endif
+	erratum_a008850_post();
+
 #ifdef CONFIG_FSL_DEEP_SLEEP
 	fsl_dp_ddr_restore();
 #endif
diff --git a/board/freescale/ls1043ardb/ddr.h b/board/freescale/ls1043ardb/ddr.h
index b17eb80885..a77ddf3d24 100644
--- a/board/freescale/ls1043ardb/ddr.h
+++ b/board/freescale/ls1043ardb/ddr.h
@@ -6,6 +6,9 @@
 
 #ifndef __DDR_H__
 #define __DDR_H__
+
+extern void erratum_a008850_post(void);
+
 struct board_specific_parameters {
 	u32 n_ranks;
 	u32 datarate_mhz_high;
@@ -31,9 +34,9 @@ static const struct board_specific_parameters udimm0[] = {
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
 	 */
 #ifdef CONFIG_SYS_FSL_DDR4
-	{1,  1666, 0, 6,     7, 0x07090800, 0x00000000,},
-	{1,  1900, 0, 6,     7, 0x07090800, 0x00000000,},
-	{1,  2200, 0, 6,     7, 0x07090800, 0x00000000,},
+	{1,  1666, 0, 12,     7, 0x07090800, 0x00000000,},
+	{1,  1900, 0, 12,     7, 0x07090800, 0x00000000,},
+	{1,  2200, 0, 12,     7, 0x07090800, 0x00000000,},
 #endif
 	{}
 };
diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c
index ec5fdbfe27..14365207da 100644
--- a/board/freescale/ls1043ardb/ls1043ardb.c
+++ b/board/freescale/ls1043ardb/ls1043ardb.c
@@ -19,7 +19,6 @@
 #include <fsl_csu.h>
 #include <fsl_esdhc.h>
 #include <fsl_ifc.h>
-#include <environment.h>
 #include <fsl_sec.h>
 #include "cpld.h"
 #ifdef CONFIG_U_QE
@@ -31,12 +30,12 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int checkboard(void)
 {
-	static const char *freq[3] = {"100.00MHZ", "156.25MHZ"};
+	static const char *freq[2] = {"100.00MHZ", "156.25MHZ"};
 #ifndef CONFIG_SD_BOOT
 	u8 cfg_rcw_src1, cfg_rcw_src2;
-	u32 cfg_rcw_src;
+	u16 cfg_rcw_src;
 #endif
-	u32 sd1refclk_sel;
+	u8 sd1refclk_sel;
 
 	printf("Board: LS1043ARDB, boot from ");
 
@@ -83,22 +82,12 @@ int board_early_init_f(void)
 
 int board_init(void)
 {
-	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
-
-	/*
-	 * Set CCI-400 control override register to enable barrier
-	 * transaction
-	 */
-	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
+	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
 
 #ifdef CONFIG_FSL_IFC
 	init_final_memctl_regs();
 #endif
 
-#ifdef CONFIG_ENV_IS_NOWHERE
-	gd->env_addr = (ulong)&default_environment[0];
-#endif
-
 #ifdef CONFIG_LAYERSCAPE_NS_ACCESS
 	enable_layerscape_ns_access();
 #endif
@@ -106,6 +95,8 @@ int board_init(void)
 #ifdef CONFIG_U_QE
 	u_qe_init();
 #endif
+	/* invert AQR105 IRQ pins polarity */
+	out_be32(&scfg->intpcr, AQR105_IRQ_MASK);
 
 	return 0;
 }
diff --git a/board/freescale/ls2080aqds/MAINTAINERS b/board/freescale/ls2080aqds/MAINTAINERS
index 7d3bfc8e4e..076532622f 100644
--- a/board/freescale/ls2080aqds/MAINTAINERS
+++ b/board/freescale/ls2080aqds/MAINTAINERS
@@ -1,5 +1,5 @@
 LS2080A BOARD
-M:	Prabhakar Kushwaha <prabhakar@freescale.com>
+M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
 S:	Maintained
 F:	board/freescale/ls2080aqds/
 F:	board/freescale/ls2080a/ls2080aqds.c
diff --git a/board/freescale/ls2080aqds/README b/board/freescale/ls2080aqds/README
index 6ddad92f2c..5c98866712 100644
--- a/board/freescale/ls2080aqds/README
+++ b/board/freescale/ls2080aqds/README
@@ -7,48 +7,9 @@ SW development platform for the Freescale LS2080A processor series, with
 a complete debugging environment.
 
 LS2080A SoC Overview
-------------------
-The LS2080A integrated multicore processor combines eight ARM Cortex-A57
-processor cores with high-performance data path acceleration logic and network
-and peripheral bus interfaces required for networking, telecom/datacom,
-wireless infrastructure, and mil/aerospace applications.
-
-The LS2080A SoC includes the following function and features:
-
- - Eight 64-bit ARM Cortex-A57 CPUs
- - 1 MB platform cache with ECC
- - Two 64-bit DDR4 SDRAM memory controllers with ECC and interleaving support
- - One secondary 32-bit DDR4 SDRAM memory controller, intended for use by
-  the AIOP
- - Data path acceleration architecture (DPAA2) incorporating acceleration for
- the following functions:
-   - Packet parsing, classification, and distribution (WRIOP)
-   - Queue and Hardware buffer management for scheduling, packet sequencing, and
-     congestion management, buffer allocation and de-allocation (QBMan)
-   - Cryptography acceleration (SEC) at up to 10 Gbps
-   - RegEx pattern matching acceleration (PME) at up to 10 Gbps
-   - Decompression/compression acceleration (DCE) at up to 20 Gbps
-   - Accelerated I/O processing (AIOP) at up to 20 Gbps
-   - QDMA engine
- - 16 SerDes lanes at up to 10.3125 GHz
- - Ethernet interfaces
-   - Up to eight 10 Gbps Ethernet MACs
-   - Up to eight 1 / 2.5 Gbps Ethernet MACs
- - High-speed peripheral interfaces
-   - Four PCIe 3.0 controllers, one supporting SR-IOV
- - Additional peripheral interfaces
-   - Two serial ATA (SATA 3.0) controllers
-   - Two high-speed USB 3.0 controllers with integrated PHY
-   - Enhanced secure digital host controller (eSDXC/eMMC)
-   - Serial peripheral interface (SPI) controller
-   - Quad Serial Peripheral Interface (QSPI) Controller
-   - Four I2C controllers
-   - Two DUARTs
-   - Integrated flash controller (IFC 2.0) supporting NAND and NOR flash
- - Support for hardware virtualization and partitioning enforcement
- - QorIQ platform's trust architecture 3.0
- - Service processor (SP) provides pre-boot initialization and secure-boot
-  capabilities
+--------------------
+Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A
+SoC overview.
 
  LS2080AQDS board Overview
  -----------------------
diff --git a/board/freescale/ls2080aqds/ddr.h b/board/freescale/ls2080aqds/ddr.h
index b76ea61ba0..eba62c33b2 100644
--- a/board/freescale/ls2080aqds/ddr.h
+++ b/board/freescale/ls2080aqds/ddr.h
@@ -28,10 +28,10 @@ static const struct board_specific_parameters udimm0[] = {
 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
 	 */
-	{2,  1350, 0, 4,     6, 0x0708090B, 0x0C0D0E09,},
-	{2,  1666, 0, 4,     7, 0x08090A0C, 0x0D0F100B,},
-	{2,  1900, 0, 4,     7, 0x09090B0D, 0x0E10120B,},
-	{2,  2300, 0, 4,     8, 0x090A0C0F, 0x1012130C,},
+	{2,  1350, 0, 8,     6, 0x0708090B, 0x0C0D0E09,},
+	{2,  1666, 0, 8,     7, 0x08090A0C, 0x0D0F100B,},
+	{2,  1900, 0, 8,     7, 0x09090B0D, 0x0E10120B,},
+	{2,  2300, 0, 8,     8, 0x090A0C0F, 0x1012130C,},
 	{}
 };
 
@@ -42,10 +42,10 @@ static const struct board_specific_parameters udimm2[] = {
 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
 	 */
-	{2,  1350, 0, 4,   0xd, 0x0C0A0A00, 0x00000009,},
-	{2,  1666, 0, 4,   0xd, 0x0C0A0A00, 0x00000009,},
-	{2,  1900, 0, 4,   0xe, 0x0D0C0B00, 0x0000000A,},
-	{2,  2200, 0, 4,   0xe, 0x0D0C0B00, 0x0000000A,},
+	{2,  1350, 0, 8,   0xd, 0x0C0A0A00, 0x00000009,},
+	{2,  1666, 0, 8,   0xd, 0x0C0A0A00, 0x00000009,},
+	{2,  1900, 0, 8,   0xe, 0x0D0C0B00, 0x0000000A,},
+	{2,  2200, 0, 8,   0xe, 0x0D0C0B00, 0x0000000A,},
 	{}
 };
 
@@ -55,10 +55,10 @@ static const struct board_specific_parameters rdimm0[] = {
 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
 	 */
-	{2,  1350, 0, 4,     6, 0x0708090B, 0x0C0D0E09,},
-	{2,  1666, 0, 4,     7, 0x08090A0C, 0x0D0F100B,},
-	{2,  1900, 0, 4,     7, 0x09090B0D, 0x0E10120B,},
-	{2,  2200, 0, 4,     8, 0x090A0C0F, 0x1012130C,},
+	{2,  1350, 0, 8,     6, 0x0708090B, 0x0C0D0E09,},
+	{2,  1666, 0, 8,     7, 0x08090A0C, 0x0D0F100B,},
+	{2,  1900, 0, 8,     7, 0x09090B0D, 0x0E10120B,},
+	{2,  2200, 0, 8,     8, 0x090A0C0F, 0x1012130C,},
 	{}
 };
 
@@ -69,10 +69,10 @@ static const struct board_specific_parameters rdimm2[] = {
 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
 	 */
-	{2,  1350, 0, 4,     6, 0x0708090B, 0x0C0D0E09,},
-	{2,  1666, 0, 4,     7, 0x0B0A090C, 0x0D0F100B,},
-	{2,  1900, 0, 4,     7, 0x09090B0D, 0x0E10120B,},
-	{2,  2200, 0, 4,     8, 0x090A0C0F, 0x1012130C,},
+	{2,  1350, 0, 8,     6, 0x0708090B, 0x0C0D0E09,},
+	{2,  1666, 0, 8,     7, 0x0B0A090C, 0x0D0F100B,},
+	{2,  1900, 0, 8,     7, 0x09090B0D, 0x0E10120B,},
+	{2,  2200, 0, 8,     8, 0x090A0C0F, 0x1012130C,},
 	{}
 };
 
diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c
index b3bd40afb7..897793d85b 100644
--- a/board/freescale/ls2080aqds/ls2080aqds.c
+++ b/board/freescale/ls2080aqds/ls2080aqds.c
@@ -282,7 +282,9 @@ void fdt_fixup_board_enet(void *fdt)
 #ifdef CONFIG_OF_BOARD_SETUP
 int ft_board_setup(void *blob, bd_t *bd)
 {
+#ifdef CONFIG_FSL_MC_ENET
 	int err;
+#endif
 	u64 base[CONFIG_NR_DRAM_BANKS];
 	u64 size[CONFIG_NR_DRAM_BANKS];
 
diff --git a/board/freescale/ls2080ardb/MAINTAINERS b/board/freescale/ls2080ardb/MAINTAINERS
index 5562917ec9..a20c003ce7 100644
--- a/board/freescale/ls2080ardb/MAINTAINERS
+++ b/board/freescale/ls2080ardb/MAINTAINERS
@@ -1,5 +1,5 @@
 LS2080A BOARD
-M:	Prabhakar Kushwaha <prabhakar@freescale.com>
+M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
 S:	Maintained
 F:	board/freescale/ls2080ardb/
 F:	board/freescale/ls2080a/ls2080ardb.c
diff --git a/board/freescale/ls2080ardb/README b/board/freescale/ls2080ardb/README
index 6708ca9cc7..b1613ba680 100644
--- a/board/freescale/ls2080ardb/README
+++ b/board/freescale/ls2080ardb/README
@@ -5,48 +5,9 @@ evaluation, and development platform that supports the QorIQ LS2080A
 Layerscape Architecture processor.
 
 LS2080A SoC Overview
-------------------
-The LS2080A integrated multicore processor combines eight ARM Cortex-A57
-processor cores with high-performance data path acceleration logic and network
-and peripheral bus interfaces required for networking, telecom/datacom,
-wireless infrastructure, and mil/aerospace applications.
-
-The LS2080A SoC includes the following function and features:
-
- - Eight 64-bit ARM Cortex-A57 CPUs
- - 1 MB platform cache with ECC
- - Two 64-bit DDR4 SDRAM memory controllers with ECC and interleaving support
- - One secondary 32-bit DDR4 SDRAM memory controller, intended for use by
-  the AIOP
- - Data path acceleration architecture (DPAA2) incorporating acceleration for
- the following functions:
-   - Packet parsing, classification, and distribution (WRIOP)
-   - Queue and Hardware buffer management for scheduling, packet sequencing, and
-     congestion management, buffer allocation and de-allocation (QBMan)
-   - Cryptography acceleration (SEC) at up to 10 Gbps
-   - RegEx pattern matching acceleration (PME) at up to 10 Gbps
-   - Decompression/compression acceleration (DCE) at up to 20 Gbps
-   - Accelerated I/O processing (AIOP) at up to 20 Gbps
-   - QDMA engine
- - 16 SerDes lanes at up to 10.3125 GHz
- - Ethernet interfaces
-   - Up to eight 10 Gbps Ethernet MACs
-   - Up to eight 1 / 2.5 Gbps Ethernet MACs
- - High-speed peripheral interfaces
-   - Four PCIe 3.0 controllers, one supporting SR-IOV
- - Additional peripheral interfaces
-   - Two serial ATA (SATA 3.0) controllers
-   - Two high-speed USB 3.0 controllers with integrated PHY
-   - Enhanced secure digital host controller (eSDXC/eMMC)
-   - Serial peripheral interface (SPI) controller
-   - Quad Serial Peripheral Interface (QSPI) Controller
-   - Four I2C controllers
-   - Two DUARTs
-   - Integrated flash controller (IFC 2.0) supporting NAND and NOR flash
- - Support for hardware virtualization and partitioning enforcement
- - QorIQ platform's trust architecture 3.0
- - Service processor (SP) provides pre-boot initialization and secure-boot
-  capabilities
+--------------------
+Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A
+SoC overview.
 
  LS2080ARDB board Overview
  -----------------------
diff --git a/board/freescale/ls2080ardb/ddr.h b/board/freescale/ls2080ardb/ddr.h
index bda9d4a40f..8d5a49061c 100644
--- a/board/freescale/ls2080ardb/ddr.h
+++ b/board/freescale/ls2080ardb/ddr.h
@@ -28,10 +28,10 @@ static const struct board_specific_parameters udimm0[] = {
 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
 	 */
-	{2,  1350, 0, 4,     6, 0x0708090B, 0x0C0D0E09,},
-	{2,  1666, 0, 4,     8, 0x08090B0D, 0x0E10100C,},
-	{2,  1900, 0, 4,     8, 0x090A0C0E, 0x1012120D,},
-	{2,  2300, 0, 4,     9, 0x0A0B0C10, 0x1114140E,},
+	{2,  1350, 0, 8,     6, 0x0708090B, 0x0C0D0E09,},
+	{2,  1666, 0, 10,    9, 0x090A0B0E, 0x0F11110C,},
+	{2,  1900, 0, 12,  0xA, 0x0B0C0E11, 0x1214140F,},
+	{2,  2300, 0, 12,  0xB, 0x0C0D0F12, 0x14161610,},
 	{}
 };
 
@@ -42,10 +42,10 @@ static const struct board_specific_parameters udimm2[] = {
 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
 	 */
-	{2,  1350, 0, 4,   0xd, 0x0C0A0A00, 0x00000009,},
-	{2,  1666, 0, 4,   0xd, 0x0C0A0A00, 0x00000009,},
-	{2,  1900, 0, 4,   0xe, 0x0D0C0B00, 0x0000000A,},
-	{2,  2200, 0, 4,   0xe, 0x0D0C0B00, 0x0000000A,},
+	{2,  1350, 0, 8,   0xd, 0x0C0A0A00, 0x00000009,},
+	{2,  1666, 0, 8,   0xd, 0x0C0A0A00, 0x00000009,},
+	{2,  1900, 0, 8,   0xe, 0x0D0C0B00, 0x0000000A,},
+	{2,  2200, 0, 8,   0xe, 0x0D0C0B00, 0x0000000A,},
 	{}
 };
 
@@ -55,10 +55,10 @@ static const struct board_specific_parameters rdimm0[] = {
 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
 	 */
-	{2,  1350, 0, 4,     6, 0x0708090B, 0x0C0D0E09,},
-	{2,  1666, 0, 4,     7, 0x08090A0C, 0x0D0F100B,},
-	{2,  1900, 0, 4,     7, 0x09090B0D, 0x0E10120B,},
-	{2,  2200, 0, 4,     8, 0x090A0C0F, 0x1012130C,},
+	{2,  1350, 0, 8,     6, 0x0708090B, 0x0C0D0E09,},
+	{2,  1666, 0, 8,     7, 0x08090A0C, 0x0D0F100B,},
+	{2,  1900, 0, 8,     7, 0x09090B0D, 0x0E10120B,},
+	{2,  2200, 0, 8,     8, 0x090A0C0F, 0x1012130C,},
 	{}
 };
 
@@ -69,10 +69,10 @@ static const struct board_specific_parameters rdimm2[] = {
 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
 	 */
-	{2,  1350, 0, 4,     6, 0x0708090B, 0x0C0D0E09,},
-	{2,  1666, 0, 4,     7, 0x0B0A090C, 0x0D0F100B,},
-	{2,  1900, 0, 4,     7, 0x09090B0D, 0x0E10120B,},
-	{2,  2200, 0, 4,     8, 0x090A0C0F, 0x1012130C,},
+	{2,  1350, 0, 8,     6, 0x0708090B, 0x0C0D0E09,},
+	{2,  1666, 0, 8,     7, 0x0B0A090C, 0x0D0F100B,},
+	{2,  1900, 0, 8,     7, 0x09090B0D, 0x0E10120B,},
+	{2,  2200, 0, 8,     8, 0x090A0C0F, 0x1012130C,},
 	{}
 };
 
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index fb39af6445..52e5e3f516 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -156,7 +156,9 @@ int board_init(void)
 {
 	char *env_hwconfig;
 	u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
+#ifdef CONFIG_FSL_MC_ENET
 	u32 __iomem *irq_ccsr = (u32 __iomem *)ISC_BASE;
+#endif
 	u32 val;
 
 	init_final_memctl_regs();
@@ -178,8 +180,10 @@ int board_init(void)
 
 	QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET_EN);
 
+#ifdef CONFIG_FSL_MC_ENET
 	/* invert AQR405 IRQ pins polarity */
 	out_le32(irq_ccsr + IRQCR_OFFSET / 4, AQR405_IRQ_MASK);
+#endif
 
 	return 0;
 }
@@ -261,7 +265,9 @@ void fdt_fixup_board_enet(void *fdt)
 #ifdef CONFIG_OF_BOARD_SETUP
 int ft_board_setup(void *blob, bd_t *bd)
 {
+#ifdef CONFIG_FSL_MC_ENET
 	int err;
+#endif
 	u64 base[CONFIG_NR_DRAM_BANKS];
 	u64 size[CONFIG_NR_DRAM_BANKS];
 
diff --git a/board/freescale/m5329evb/nand.c b/board/freescale/m5329evb/nand.c
index 8d88bc03c0..88496812bf 100644
--- a/board/freescale/m5329evb/nand.c
+++ b/board/freescale/m5329evb/nand.c
@@ -24,7 +24,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl)
 {
-	struct nand_chip *this = mtdinfo->priv;
+	struct nand_chip *this = mtd_to_nand(mtdinfo);
 	volatile u16 *nCE = (u16 *) CONFIG_SYS_LATCH_ADDR;
 
 	if (ctrl & NAND_CTRL_CHANGE) {
diff --git a/board/freescale/m5373evb/nand.c b/board/freescale/m5373evb/nand.c
index 92cef2a97d..a96a59991f 100644
--- a/board/freescale/m5373evb/nand.c
+++ b/board/freescale/m5373evb/nand.c
@@ -24,7 +24,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl)
 {
-	struct nand_chip *this = mtdinfo->priv;
+	struct nand_chip *this = mtd_to_nand(mtdinfo);
 	volatile u16 *nCE = (u16 *) CONFIG_SYS_LATCH_ADDR;
 
 	if (ctrl & NAND_CTRL_CHANGE) {
diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c
index 40bd55dfba..7c44282ca2 100644
--- a/board/freescale/mpc5121ads/mpc5121ads.c
+++ b/board/freescale/mpc5121ads/mpc5121ads.c
@@ -274,11 +274,11 @@ int checkboard (void)
 	return 0;
 }
 
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+#ifdef CONFIG_OF_BOARD_SETUP
 int ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);
 
 	return 0;
 }
-#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
+#endif /* CONFIG_OF_BOARD_SETUP */
diff --git a/board/freescale/p1010rdb/Makefile b/board/freescale/p1010rdb/Makefile
index 660d1bbc2a..86eb6946dd 100644
--- a/board/freescale/p1010rdb/Makefile
+++ b/board/freescale/p1010rdb/Makefile
@@ -13,18 +13,14 @@ endif
 endif
 
 ifdef MINIMAL
-
-obj-y	+= spl_minimal.o tlb.o law.o
-
+obj-y	+= spl_minimal.o
 else
-
 ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
+obj-y	+= spl.o
 endif
-
 obj-y	+= p1010rdb.o
 obj-y	+= ddr.o
+endif
+
 obj-y	+= law.o
 obj-y	+= tlb.o
-
-endif
diff --git a/board/freescale/p1010rdb/spl.c b/board/freescale/p1010rdb/spl.c
index eb8e567554..f8584084ce 100644
--- a/board/freescale/p1010rdb/spl.c
+++ b/board/freescale/p1010rdb/spl.c
@@ -72,6 +72,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifndef CONFIG_SPL_NAND_BOOT
 	env_init();
diff --git a/board/freescale/p1022ds/Makefile b/board/freescale/p1022ds/Makefile
index a5821277ef..9793853463 100644
--- a/board/freescale/p1022ds/Makefile
+++ b/board/freescale/p1022ds/Makefile
@@ -13,17 +13,15 @@ endif
 endif
 
 ifdef MINIMAL
-
-obj-y        += spl_minimal.o tlb.o law.o
-
+obj-y	+= spl_minimal.o
 else
 ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
+obj-y	+= spl.o
 endif
 obj-y	+= p1022ds.o
 obj-y	+= ddr.o
-obj-y	+= law.o
-obj-y	+= tlb.o
-
 obj-$(CONFIG_FSL_DIU_FB) += diu.o
 endif
+
+obj-y	+= law.o
+obj-y	+= tlb.o
diff --git a/board/freescale/p1022ds/spl.c b/board/freescale/p1022ds/spl.c
index 89ef95aab8..04db767f98 100644
--- a/board/freescale/p1022ds/spl.c
+++ b/board/freescale/p1022ds/spl.c
@@ -86,6 +86,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 #ifndef CONFIG_SPL_NAND_BOOT
 	env_init();
 #endif
diff --git a/board/freescale/p1_p2_rdb_pc/Makefile b/board/freescale/p1_p2_rdb_pc/Makefile
index a2a1f92ce8..045d4093ae 100644
--- a/board/freescale/p1_p2_rdb_pc/Makefile
+++ b/board/freescale/p1_p2_rdb_pc/Makefile
@@ -13,17 +13,14 @@ endif
 endif
 
 ifdef MINIMAL
-
-obj-y	+= spl_minimal.o tlb.o law.o
-
+obj-y	+= spl_minimal.o
 else
 ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
+obj-y	+= spl.o
 endif
-
-obj-y        += p1_p2_rdb_pc.o
-obj-y        += ddr.o
-obj-y        += law.o
-obj-y        += tlb.o
-
+obj-y	+= p1_p2_rdb_pc.o
+obj-y	+= ddr.o
 endif
+
+obj-y	+= law.o
+obj-y	+= tlb.o
diff --git a/board/freescale/p1_p2_rdb_pc/spl.c b/board/freescale/p1_p2_rdb_pc/spl.c
index 0142746c84..76a3cf47cc 100644
--- a/board/freescale/p1_p2_rdb_pc/spl.c
+++ b/board/freescale/p1_p2_rdb_pc/spl.c
@@ -83,6 +83,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifndef CONFIG_SPL_NAND_BOOT
 	env_init();
diff --git a/board/freescale/p2041rdb/Makefile b/board/freescale/p2041rdb/Makefile
index c74f4c62f8..a335ec65fa 100644
--- a/board/freescale/p2041rdb/Makefile
+++ b/board/freescale/p2041rdb/Makefile
@@ -7,6 +7,6 @@
 #
 
 obj-y	+= p2041rdb.o
-obj-y += cpld.o
+obj-y	+= cpld.o
 obj-y	+= ddr.o
 obj-y	+= eth.o
diff --git a/board/freescale/t102xqds/Makefile b/board/freescale/t102xqds/Makefile
index d94f2307d9..afbc9146ed 100644
--- a/board/freescale/t102xqds/Makefile
+++ b/board/freescale/t102xqds/Makefile
@@ -5,7 +5,7 @@
 #
 
 ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
+obj-y	+= spl.o
 else
 obj-y	+= t102xqds.o
 obj-y	+= eth_t102xqds.o
diff --git a/board/freescale/t102xqds/ddr.c b/board/freescale/t102xqds/ddr.c
index 2d4d10f351..c26f3503b9 100644
--- a/board/freescale/t102xqds/ddr.c
+++ b/board/freescale/t102xqds/ddr.c
@@ -35,18 +35,18 @@ static const struct board_specific_parameters udimm0[] = {
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |
 	 */
 #if defined(CONFIG_SYS_FSL_DDR4)
-	{2,  1666,  0,  4,  7,  0x0808090B,  0x0C0D0E0A,},
-	{2,  1900,  0,  4,  6,  0x08080A0C,  0x0D0E0F0A,},
-	{1,  1666,  0,  4,  6,  0x0708090B,  0x0C0D0E09,},
-	{1,  1900,  0,  4,  6,  0x08080A0C,  0x0D0E0F0A,},
-	{1,  2200,  0,  4,  7,  0x08090A0D,  0x0F0F100C,},
+	{2,  1666,  0,  8,  7,  0x0808090B,  0x0C0D0E0A,},
+	{2,  1900,  0,  8,  6,  0x08080A0C,  0x0D0E0F0A,},
+	{1,  1666,  0,  8,  6,  0x0708090B,  0x0C0D0E09,},
+	{1,  1900,  0,  8,  6,  0x08080A0C,  0x0D0E0F0A,},
+	{1,  2200,  0,  8,  7,  0x08090A0D,  0x0F0F100C,},
 #elif defined(CONFIG_SYS_FSL_DDR3)
-	{2,  833,   0,  4,  6,  0x06060607,  0x08080807,},
-	{2,  1350,  0,  4,  7,  0x0708080A,  0x0A0B0C09,},
-	{2,  1666,  0,  4,  7,  0x0808090B,  0x0C0D0E0A,},
-	{1,  833,   0,  4,  6,  0x06060607,  0x08080807,},
-	{1,  1350,  0,  4,  7,  0x0708080A,  0x0A0B0C09,},
-	{1,  1666,  0,  4,  7,  0x0808090B,  0x0C0D0E0A,},
+	{2,  833,   0,  8,  6,  0x06060607,  0x08080807,},
+	{2,  1350,  0,  8,  7,  0x0708080A,  0x0A0B0C09,},
+	{2,  1666,  0,  8,  7,  0x0808090B,  0x0C0D0E0A,},
+	{1,  833,   0,  8,  6,  0x06060607,  0x08080807,},
+	{1,  1350,  0,  8,  7,  0x0708080A,  0x0A0B0C09,},
+	{1,  1666,  0,  8,  7,  0x0808090B,  0x0C0D0E0A,},
 #else
 #error DDR type not defined
 #endif
@@ -172,14 +172,13 @@ phys_size_t initdram(int board_type)
 
 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
 	puts("Initializing....using SPD\n");
-
 	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
 #else
 	/* DDR has been initialised by first stage boot loader */
 	dram_size =  fsl_ddr_sdram_size();
 #endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
 
 #if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
 	fsl_dp_resume();
diff --git a/board/freescale/t102xqds/spl.c b/board/freescale/t102xqds/spl.c
index 073ff2dcde..d59d3431ec 100644
--- a/board/freescale/t102xqds/spl.c
+++ b/board/freescale/t102xqds/spl.c
@@ -120,6 +120,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifdef CONFIG_SPL_NAND_BOOT
 	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
diff --git a/board/freescale/t102xrdb/Makefile b/board/freescale/t102xrdb/Makefile
index 052006610e..64528656ac 100644
--- a/board/freescale/t102xrdb/Makefile
+++ b/board/freescale/t102xrdb/Makefile
@@ -5,7 +5,7 @@
 #
 
 ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
+obj-y	+= spl.o
 else
 obj-y   += t102xrdb.o
 obj-$(CONFIG_T1024RDB)   += cpld.o
diff --git a/board/freescale/t102xrdb/ddr.c b/board/freescale/t102xrdb/ddr.c
index adf9fd5f78..edfbdbf3a8 100644
--- a/board/freescale/t102xrdb/ddr.c
+++ b/board/freescale/t102xrdb/ddr.c
@@ -34,12 +34,12 @@ static const struct board_specific_parameters udimm0[] = {
 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl |
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |
 	 */
-	{2,  833,   0,  4,  6,  0x06060607,  0x08080807,},
-	{2,  1350,  0,  4,  7,  0x0708080A,  0x0A0B0C09,},
-	{2,  1666,  0,  4,  7,  0x0808090B,  0x0C0D0E0A,},
-	{1,  833,   0,  4,  6,  0x06060607,  0x08080807,},
-	{1,  1350,  0,  4,  7,  0x0708080A,  0x0A0B0C09,},
-	{1,  1666,  0,  4,  7,  0x0808090B,  0x0C0D0E0A,},
+	{2,  833,   0,  8,  6,  0x06060607,  0x08080807,},
+	{2,  1350,  0,  8,  7,  0x0708080A,  0x0A0B0C09,},
+	{2,  1666,  0,  8,  7,  0x0808090B,  0x0C0D0E0A,},
+	{1,  833,   0,  8,  6,  0x06060607,  0x08080807,},
+	{1,  1350,  0,  8,  7,  0x0708080A,  0x0A0B0C09,},
+	{1,  1666,  0,  8,  7,  0x0808090B,  0x0C0D0E0A,},
 	{}
 };
 
@@ -234,12 +234,12 @@ phys_size_t initdram(int board_type)
 	puts("Initializing....using SPD\n");
 #endif
 	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
 #else
 	/* DDR has been initialised by first stage boot loader */
 	dram_size =  fsl_ddr_sdram_size();
 #endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
 
 #if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
 	fsl_dp_resume();
diff --git a/board/freescale/t102xrdb/spl.c b/board/freescale/t102xrdb/spl.c
index da97c440c4..bd3cbbf11c 100644
--- a/board/freescale/t102xrdb/spl.c
+++ b/board/freescale/t102xrdb/spl.c
@@ -107,6 +107,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifdef CONFIG_SPL_NAND_BOOT
 	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
diff --git a/board/freescale/t1040qds/ddr.h b/board/freescale/t1040qds/ddr.h
index a6e1673525..1e087460cb 100644
--- a/board/freescale/t1040qds/ddr.h
+++ b/board/freescale/t1040qds/ddr.h
@@ -29,18 +29,18 @@ static const struct board_specific_parameters udimm0[] = {
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |
 	 */
 #ifdef CONFIG_SYS_FSL_DDR4
-	{2,  1666, 0, 4,     7, 0x0808090B, 0x0C0D0E0A,},
-	{2,  1900, 0, 4,     6, 0x08080A0C, 0x0D0E0F0A,},
-	{1,  1666, 0, 4,     6, 0x0708090B, 0x0C0D0E09,},
-	{1,  1900, 0, 4,     6, 0x08080A0C, 0x0D0E0F0A,},
-	{1,  2200, 0, 4,     7, 0x08090A0D, 0x0F0F100C,},
+	{2,  1666, 0, 8,     7, 0x0808090B, 0x0C0D0E0A,},
+	{2,  1900, 0, 8,     6, 0x08080A0C, 0x0D0E0F0A,},
+	{1,  1666, 0, 8,     6, 0x0708090B, 0x0C0D0E09,},
+	{1,  1900, 0, 8,     6, 0x08080A0C, 0x0D0E0F0A,},
+	{1,  2200, 0, 8,     7, 0x08090A0D, 0x0F0F100C,},
 #elif defined(CONFIG_SYS_FSL_DDR3)
-	{2,  833,  0, 4,     6, 0x06060607, 0x08080807,},
-	{2,  1350, 0, 4,     7, 0x0708080A, 0x0A0B0C09,},
-	{2,  1666, 0, 4,     7, 0x0808090B, 0x0C0D0E0A,},
-	{1,  833,  0, 4,     6, 0x06060607, 0x08080807,},
-	{1,  1350, 0, 4,     7, 0x0708080A, 0x0A0B0C09,},
-	{1,  1666, 0, 4,     7, 0x0808090B, 0x0C0D0E0A,},
+	{2,  833,  0, 8,     6, 0x06060607, 0x08080807,},
+	{2,  1350, 0, 8,     7, 0x0708080A, 0x0A0B0C09,},
+	{2,  1666, 0, 8,     7, 0x0808090B, 0x0C0D0E0A,},
+	{1,  833,  0, 8,     6, 0x06060607, 0x08080807,},
+	{1,  1350, 0, 8,     7, 0x0708080A, 0x0A0B0C09,},
+	{1,  1666, 0, 8,     7, 0x0808090B, 0x0C0D0E0A,},
 #else
 #error DDR type not defined
 #endif
diff --git a/board/freescale/t104xrdb/ddr.c b/board/freescale/t104xrdb/ddr.c
index cf79d2ddb2..22d6a5f617 100644
--- a/board/freescale/t104xrdb/ddr.c
+++ b/board/freescale/t104xrdb/ddr.c
@@ -124,15 +124,12 @@ phys_size_t initdram(int board_type)
 
 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
 	puts("Initializing....using SPD\n");
-
 	dram_size = fsl_ddr_sdram();
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
 #else
 	dram_size =  fsl_ddr_sdram_size();
 #endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
 
 #if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
 	fsl_dp_resume();
diff --git a/board/freescale/t104xrdb/ddr.h b/board/freescale/t104xrdb/ddr.h
index b9c02f7fe0..012991cf46 100644
--- a/board/freescale/t104xrdb/ddr.h
+++ b/board/freescale/t104xrdb/ddr.h
@@ -29,20 +29,20 @@ static const struct board_specific_parameters udimm0[] = {
 	 * ranks| mhz| GB  |adjst| start |   ctl2
 	 */
 #ifdef CONFIG_SYS_FSL_DDR4
-	{2,  1600, 4, 4,     6, 0x07090A0c, 0x0e0f100a},
+	{2,  1600, 4, 8,     6, 0x07090A0c, 0x0e0f100a},
 #elif defined(CONFIG_SYS_FSL_DDR3)
-	{2,  833,  4, 4,     6, 0x06060607, 0x08080807},
-	{2,  833,  0, 4,     6, 0x06060607, 0x08080807},
-	{2,  1350, 4, 4,     7, 0x0708080A, 0x0A0B0C09},
-	{2,  1350, 0, 4,     7, 0x0708080A, 0x0A0B0C09},
-	{2,  1666, 4, 4,     7, 0x0808090B, 0x0C0D0E0A},
-	{2,  1666, 0, 4,     7, 0x0808090B, 0x0C0D0E0A},
-	{1,  833,  4, 4,     6, 0x06060607, 0x08080807},
-	{1,  833,  0, 4,     6, 0x06060607, 0x08080807},
-	{1,  1350, 4, 4,     7, 0x0708080A, 0x0A0B0C09},
-	{1,  1350, 0, 4,     7, 0x0708080A, 0x0A0B0C09},
-	{1,  1666, 4, 4,     7, 0x0808090B, 0x0C0D0E0A},
-	{1,  1666, 0, 4,     7, 0x0808090B, 0x0C0D0E0A},
+	{2,  833,  4, 8,     6, 0x06060607, 0x08080807},
+	{2,  833,  0, 8,     6, 0x06060607, 0x08080807},
+	{2,  1350, 4, 8,     7, 0x0708080A, 0x0A0B0C09},
+	{2,  1350, 0, 8,     7, 0x0708080A, 0x0A0B0C09},
+	{2,  1666, 4, 8,     7, 0x0808090B, 0x0C0D0E0A},
+	{2,  1666, 0, 8,     7, 0x0808090B, 0x0C0D0E0A},
+	{1,  833,  4, 8,     6, 0x06060607, 0x08080807},
+	{1,  833,  0, 8,     6, 0x06060607, 0x08080807},
+	{1,  1350, 4, 8,     7, 0x0708080A, 0x0A0B0C09},
+	{1,  1350, 0, 8,     7, 0x0708080A, 0x0A0B0C09},
+	{1,  1666, 4, 8,     7, 0x0808090B, 0x0C0D0E0A},
+	{1,  1666, 0, 8,     7, 0x0808090B, 0x0C0D0E0A},
 #else
 #error DDR type not defined
 #endif
diff --git a/board/freescale/t104xrdb/spl.c b/board/freescale/t104xrdb/spl.c
index 81f48c4c30..4b35af63f6 100644
--- a/board/freescale/t104xrdb/spl.c
+++ b/board/freescale/t104xrdb/spl.c
@@ -98,6 +98,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifdef CONFIG_SPL_MMC_BOOT
 	mmc_initialize(bd);
diff --git a/board/freescale/t208xqds/MAINTAINERS b/board/freescale/t208xqds/MAINTAINERS
index deda092a6a..d747de3f34 100644
--- a/board/freescale/t208xqds/MAINTAINERS
+++ b/board/freescale/t208xqds/MAINTAINERS
@@ -1,5 +1,5 @@
 T208XQDS BOARD
-#M:	-
+M:	Shengzhou Liu <Shengzhou.Liu@nxp.com>
 S:	Maintained
 F:	board/freescale/t208xqds/
 F:	include/configs/T208xQDS.h
diff --git a/board/freescale/t208xqds/Makefile b/board/freescale/t208xqds/Makefile
index 6cb72c9fd5..ef04a26463 100644
--- a/board/freescale/t208xqds/Makefile
+++ b/board/freescale/t208xqds/Makefile
@@ -7,10 +7,8 @@
 ifdef CONFIG_SPL_BUILD
 obj-y += spl.o
 else
-obj-$(CONFIG_T2080QDS) += t208xqds.o
-obj-$(CONFIG_T2080QDS) += eth_t208xqds.o
-obj-$(CONFIG_T2081QDS) += t208xqds.o
-obj-$(CONFIG_T2081QDS) += eth_t208xqds.o
+obj-$(CONFIG_T2080QDS) += t208xqds.o eth_t208xqds.o
+obj-$(CONFIG_T2081QDS) += t208xqds.o eth_t208xqds.o
 obj-$(CONFIG_PCI)      += pci.o
 endif
 
diff --git a/board/freescale/t208xqds/ddr.c b/board/freescale/t208xqds/ddr.c
index f1aff5481e..f96470f020 100644
--- a/board/freescale/t208xqds/ddr.c
+++ b/board/freescale/t208xqds/ddr.c
@@ -108,13 +108,12 @@ phys_size_t initdram(int board_type)
 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
 	puts("Initializing....using SPD\n");
 	dram_size = fsl_ddr_sdram();
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
 #else
 	/* DDR has been initialised by first stage boot loader */
 	dram_size =  fsl_ddr_sdram_size();
 #endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
 
 	return dram_size;
 }
diff --git a/board/freescale/t208xqds/ddr.h b/board/freescale/t208xqds/ddr.h
index 9c26fdf3bd..255ab2c543 100644
--- a/board/freescale/t208xqds/ddr.h
+++ b/board/freescale/t208xqds/ddr.h
@@ -28,17 +28,17 @@ static const struct board_specific_parameters udimm0[] = {
 	 *   num|  hi| rank|  clk| wrlvl | wrlvl | wrlvl |
 	 * ranks| mhz| GB  |adjst| start | ctl2  | ctl3  |
 	 */
-	{2,  1200,  0,  5,  7,  0x0708090a,  0x0b0c0d09},
-	{2,  1400,  0,  5,  7,  0x08090a0c,  0x0d0e0f0a},
-	{2,  1700,  0,  5,  8,  0x090a0b0c,  0x0e10110c},
-	{2,  1900,  0,  5,  8,  0x090b0c0f,  0x1012130d},
-	{2,  2140,  0,  5,  8,  0x090b0c0f,  0x1012130d},
-	{1,  1200,  0,  5,  7,  0x0808090a,  0x0b0c0c0a},
-	{1,  1500,  0,  5,  6,  0x07070809,  0x0a0b0b09},
-	{1,  1600,  0,  5,  8,  0x090b0b0d,  0x0d0e0f0b},
-	{1,  1700,  0,  4,  8,  0x080a0a0c,  0x0c0d0e0a},
-	{1,  1900,  0,  5,  8,  0x090a0c0d,  0x0e0f110c},
-	{1,  2140,  0,  4,  8,  0x090a0b0d,  0x0e0f110b},
+	{2,  1200,  0, 10,  7,  0x0708090a,  0x0b0c0d09},
+	{2,  1400,  0, 10,  7,  0x08090a0c,  0x0d0e0f0a},
+	{2,  1700,  0, 10,  8,  0x090a0b0c,  0x0e10110c},
+	{2,  1900,  0, 10,  8,  0x090b0c0f,  0x1012130d},
+	{2,  2140,  0, 10,  8,  0x090b0c0f,  0x1012130d},
+	{1,  1200,  0, 10,  7,  0x0808090a,  0x0b0c0c0a},
+	{1,  1500,  0, 10,  6,  0x07070809,  0x0a0b0b09},
+	{1,  1600,  0, 10,  8,  0x090b0b0d,  0x0d0e0f0b},
+	{1,  1700,  0,  8,  8,  0x080a0a0c,  0x0c0d0e0a},
+	{1,  1900,  0, 10,  8,  0x090a0c0d,  0x0e0f110c},
+	{1,  2140,  0,  8,  8,  0x090a0b0d,  0x0e0f110b},
 	{}
 };
 
@@ -49,15 +49,15 @@ static const struct board_specific_parameters rdimm0[] = {
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |
 	 */
 	/* TODO: need tuning these parameters if RDIMM is used */
-	{4,  1350, 0, 5,     9, 0x08070605, 0x06070806},
-	{4,  1666, 0, 5,    11, 0x0a080706, 0x07090906},
-	{4,  2140, 0, 5,    12, 0x0b090807, 0x080a0b07},
-	{2,  1350, 0, 5,     9, 0x08070605, 0x06070806},
-	{2,  1666, 0, 5,    11, 0x0a090806, 0x08090a06},
-	{2,  2140, 0, 5,    12, 0x0b090807, 0x080a0b07},
-	{1,  1350, 0, 5,     9, 0x08070605, 0x06070806},
-	{1,  1666, 0, 5,    11, 0x0a090806, 0x08090a06},
-	{1,  2140, 0, 4,    12, 0x0b090807, 0x080a0b07},
+	{4,  1350, 0, 10,     9, 0x08070605, 0x06070806},
+	{4,  1666, 0, 10,    11, 0x0a080706, 0x07090906},
+	{4,  2140, 0, 10,    12, 0x0b090807, 0x080a0b07},
+	{2,  1350, 0, 10,     9, 0x08070605, 0x06070806},
+	{2,  1666, 0, 10,    11, 0x0a090806, 0x08090a06},
+	{2,  2140, 0, 10,    12, 0x0b090807, 0x080a0b07},
+	{1,  1350, 0, 10,     9, 0x08070605, 0x06070806},
+	{1,  1666, 0, 10,    11, 0x0a090806, 0x08090a06},
+	{1,  2140, 0,  8,    12, 0x0b090807, 0x080a0b07},
 	{}
 };
 
diff --git a/board/freescale/t208xqds/spl.c b/board/freescale/t208xqds/spl.c
index 55a0f8fdce..bb02dab2f1 100644
--- a/board/freescale/t208xqds/spl.c
+++ b/board/freescale/t208xqds/spl.c
@@ -106,6 +106,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifdef CONFIG_SPL_NAND_BOOT
 	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
diff --git a/board/freescale/t208xrdb/MAINTAINERS b/board/freescale/t208xrdb/MAINTAINERS
index 16428798cd..ccbfbab142 100644
--- a/board/freescale/t208xrdb/MAINTAINERS
+++ b/board/freescale/t208xrdb/MAINTAINERS
@@ -1,5 +1,5 @@
 T208XRDB BOARD
-#M:	-
+M:	Shengzhou Liu <Shengzhou.Liu@nxp.com>
 S:	Maintained
 F:	board/freescale/t208xrdb/
 F:	include/configs/T208xRDB.h
diff --git a/board/freescale/t208xrdb/Makefile b/board/freescale/t208xrdb/Makefile
index 9605f8b606..cd8fe096d8 100644
--- a/board/freescale/t208xrdb/Makefile
+++ b/board/freescale/t208xrdb/Makefile
@@ -5,11 +5,9 @@
 #
 
 ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
+obj-y	+= spl.o
 else
-obj-$(CONFIG_T2080RDB) += t208xrdb.o
-obj-$(CONFIG_T2080RDB) += eth_t208xrdb.o
-obj-$(CONFIG_T2080RDB) += cpld.o
+obj-$(CONFIG_T2080RDB) += t208xrdb.o eth_t208xrdb.o cpld.o
 obj-$(CONFIG_PCI)      += pci.o
 endif
 
diff --git a/board/freescale/t208xrdb/ddr.c b/board/freescale/t208xrdb/ddr.c
index 053f128e5b..f6c8ca30ac 100644
--- a/board/freescale/t208xrdb/ddr.c
+++ b/board/freescale/t208xrdb/ddr.c
@@ -101,12 +101,12 @@ phys_size_t initdram(int board_type)
 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
 	puts("Initializing....using SPD\n");
 	dram_size = fsl_ddr_sdram();
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
 #else
 	/* DDR has been initialised by first stage boot loader */
 	dram_size = fsl_ddr_sdram_size();
 #endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
+
 	return dram_size;
 }
diff --git a/board/freescale/t208xrdb/ddr.h b/board/freescale/t208xrdb/ddr.h
index 08cbb606d5..175cf56a09 100644
--- a/board/freescale/t208xrdb/ddr.h
+++ b/board/freescale/t208xrdb/ddr.h
@@ -28,16 +28,16 @@ static const struct board_specific_parameters udimm0[] = {
 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl |
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |
 	 */
-	{2,  1200, 2, 5,     7, 0x0808090a, 0x0b0c0c0a},
-	{2,  1500, 2, 5,     6, 0x07070809, 0x0a0b0b09},
-	{2,  1600, 2, 5,     8, 0x0808070b, 0x0c0d0e0a},
-	{2,  1700, 2, 4,     7, 0x080a0a0c, 0x0c0d0e0a},
-	{2,  1900, 0, 5,     7, 0x0808080c, 0x0b0c0c09},
-	{1,  1200, 2, 5,     7, 0x0808090a, 0x0b0c0c0a},
-	{1,  1500, 2, 5,     6, 0x07070809, 0x0a0b0b09},
-	{1,  1600, 2, 5,     8, 0x0808070b, 0x0c0d0e0a},
-	{1,  1700, 2, 4,     7, 0x080a0a0c, 0x0c0d0e0a},
-	{1,  1900, 0, 5,     7, 0x0808080c, 0x0b0c0c09},
+	{2,  1200, 2, 10,     7, 0x0808090a, 0x0b0c0c0a},
+	{2,  1500, 2, 10,     6, 0x07070809, 0x0a0b0b09},
+	{2,  1600, 2, 10,     8, 0x0808070b, 0x0c0d0e0a},
+	{2,  1700, 2,  8,     7, 0x080a0a0c, 0x0c0d0e0a},
+	{2,  1900, 0, 10,     7, 0x0808080c, 0x0b0c0c09},
+	{1,  1200, 2, 10,     7, 0x0808090a, 0x0b0c0c0a},
+	{1,  1500, 2, 10,     6, 0x07070809, 0x0a0b0b09},
+	{1,  1600, 2, 10,     8, 0x0808070b, 0x0c0d0e0a},
+	{1,  1700, 2,  8,     7, 0x080a0a0c, 0x0c0d0e0a},
+	{1,  1900, 0, 10,     7, 0x0808080c, 0x0b0c0c09},
 	{}
 };
 
diff --git a/board/freescale/t208xrdb/spl.c b/board/freescale/t208xrdb/spl.c
index f63366bb0e..2ff05a29f5 100644
--- a/board/freescale/t208xrdb/spl.c
+++ b/board/freescale/t208xrdb/spl.c
@@ -76,6 +76,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifdef CONFIG_SPL_NAND_BOOT
 	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
diff --git a/board/freescale/t4qds/Makefile b/board/freescale/t4qds/Makefile
index bd2c1f1622..731ccb0b29 100644
--- a/board/freescale/t4qds/Makefile
+++ b/board/freescale/t4qds/Makefile
@@ -5,12 +5,12 @@
 #
 
 ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
+obj-y	+= spl.o
 else
-obj-$(CONFIG_T4240QDS) += t4240qds.o
-obj-$(CONFIG_T4240QDS)+= eth.o
+obj-$(CONFIG_T4240QDS)	+= t4240qds.o eth.o
 obj-$(CONFIG_PCI)	+= pci.o
 endif
+
 obj-y	+= ddr.o
 obj-y	+= law.o
 obj-y	+= tlb.o
diff --git a/board/freescale/t4qds/ddr.c b/board/freescale/t4qds/ddr.c
index 62d58c5b1f..d533924a0d 100644
--- a/board/freescale/t4qds/ddr.c
+++ b/board/freescale/t4qds/ddr.c
@@ -117,13 +117,12 @@ phys_size_t initdram(int board_type)
 
 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
 	dram_size = fsl_ddr_sdram();
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
 #else
 	/* DDR has been initialised by first stage boot loader */
 	dram_size = fsl_ddr_sdram_size();
 #endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
+
 	return dram_size;
 }
diff --git a/board/freescale/t4qds/ddr.h b/board/freescale/t4qds/ddr.h
index 4d0e3c497d..0b0cc9af39 100644
--- a/board/freescale/t4qds/ddr.h
+++ b/board/freescale/t4qds/ddr.h
@@ -31,16 +31,16 @@ static const struct board_specific_parameters udimm0[] = {
 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
 	 */
-	{2,  1350, 4, 4,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
-	{2,  1350, 0, 5,     7, 0x0709090b, 0x0c0c0d09,   0xff,    2,  0},
-	{2,  1666, 4, 4,     8, 0x080a0a0d, 0x0d10100b,   0xff,    2,  0},
-	{2,  1666, 0, 5,     7, 0x080a0a0c, 0x0d0d0e0a,   0xff,    2,  0},
-	{2,  1900, 0, 4,     8, 0x090a0b0e, 0x0f11120c,   0xff,    2,  0},
-	{2,  2140, 0, 4,     8, 0x090a0b0e, 0x0f11120c,   0xff,    2,  0},
-	{1,  1350, 0, 5,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
-	{1,  1700, 0, 5,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
-	{1,  1900, 0, 4,     8, 0x080a0a0c, 0x0e0e0f0a,   0xff,    2,  0},
-	{1,  2140, 0, 4,     8, 0x090a0b0c, 0x0e0f100b,   0xff,    2,  0},
+	{2,  1350, 4,  8,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
+	{2,  1350, 0, 10,     7, 0x0709090b, 0x0c0c0d09,   0xff,    2,  0},
+	{2,  1666, 4,  8,     8, 0x080a0a0d, 0x0d10100b,   0xff,    2,  0},
+	{2,  1666, 0, 10,     7, 0x080a0a0c, 0x0d0d0e0a,   0xff,    2,  0},
+	{2,  1900, 0,  8,     8, 0x090a0b0e, 0x0f11120c,   0xff,    2,  0},
+	{2,  2140, 0,  8,     8, 0x090a0b0e, 0x0f11120c,   0xff,    2,  0},
+	{1,  1350, 0, 10,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
+	{1,  1700, 0, 10,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
+	{1,  1900, 0,  8,     8, 0x080a0a0c, 0x0e0e0f0a,   0xff,    2,  0},
+	{1,  2140, 0,  8,     8, 0x090a0b0c, 0x0e0f100b,   0xff,    2,  0},
 	{}
 };
 
@@ -50,15 +50,15 @@ static const struct board_specific_parameters rdimm0[] = {
 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3  |      |delay |
 	 */
-	{4,  1350, 0, 5,     9, 0x08070605, 0x06070806,   0xff,    2,  0},
-	{4,  1666, 0, 5,    11, 0x0a080706, 0x07090906,   0xff,    2,  0},
-	{4,  2140, 0, 5,    12, 0x0b090807, 0x080a0b07,   0xff,    2,  0},
-	{2,  1350, 0, 5,     9, 0x08070605, 0x06070806,   0xff,    2,  0},
-	{2,  1666, 0, 5,    11, 0x0a090806, 0x08090a06,   0xff,    2,  0},
-	{2,  2140, 0, 5,    12, 0x0b090807, 0x080a0b07,   0xff,    2,  0},
-	{1,  1350, 0, 5,     9, 0x08070605, 0x06070806,   0xff,    2,  0},
-	{1,  1666, 0, 5,    11, 0x0a090806, 0x08090a06,   0xff,    2,  0},
-	{1,  2140, 0, 4,    12, 0x0b090807, 0x080a0b07,   0xff,    2,  0},
+	{4,  1350, 0, 10,     9, 0x08070605, 0x06070806,   0xff,    2,  0},
+	{4,  1666, 0, 10,    11, 0x0a080706, 0x07090906,   0xff,    2,  0},
+	{4,  2140, 0, 10,    12, 0x0b090807, 0x080a0b07,   0xff,    2,  0},
+	{2,  1350, 0, 10,     9, 0x08070605, 0x06070806,   0xff,    2,  0},
+	{2,  1666, 0, 10,    11, 0x0a090806, 0x08090a06,   0xff,    2,  0},
+	{2,  2140, 0, 10,    12, 0x0b090807, 0x080a0b07,   0xff,    2,  0},
+	{1,  1350, 0, 10,     9, 0x08070605, 0x06070806,   0xff,    2,  0},
+	{1,  1666, 0, 10,    11, 0x0a090806, 0x08090a06,   0xff,    2,  0},
+	{1,  2140, 0,  8,    12, 0x0b090807, 0x080a0b07,   0xff,    2,  0},
 	{}
 };
 
diff --git a/board/freescale/t4qds/spl.c b/board/freescale/t4qds/spl.c
index d52059a145..6ca0f03ffe 100644
--- a/board/freescale/t4qds/spl.c
+++ b/board/freescale/t4qds/spl.c
@@ -116,6 +116,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifdef CONFIG_SPL_NAND_BOOT
 	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
diff --git a/board/freescale/t4rdb/Makefile b/board/freescale/t4rdb/Makefile
index 83b55ee193..4f29eea0f4 100644
--- a/board/freescale/t4rdb/Makefile
+++ b/board/freescale/t4rdb/Makefile
@@ -5,13 +5,14 @@
 #
 
 ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
+obj-y	+= spl.o
 else
-obj-$(CONFIG_T4240RDB) += t4240rdb.o
-obj-y	+= cpld.o
-obj-y	+= eth.o
+obj-$(CONFIG_T4240RDB)	+= t4240rdb.o
+obj-y			+= cpld.o
+obj-y			+= eth.o
 obj-$(CONFIG_PCI)	+= pci.o
 endif
+
 obj-y	+= ddr.o
 obj-y	+= law.o
 obj-y	+= tlb.o
diff --git a/board/freescale/t4rdb/ddr.c b/board/freescale/t4rdb/ddr.c
index 27b37b5cc4..230f031a3b 100644
--- a/board/freescale/t4rdb/ddr.c
+++ b/board/freescale/t4rdb/ddr.c
@@ -110,13 +110,12 @@ phys_size_t initdram(int board_type)
 
 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
 	dram_size = fsl_ddr_sdram();
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
 #else
 	/* DDR has been initialised by first stage boot loader */
 	dram_size = fsl_ddr_sdram_size();
 #endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
 
 	return dram_size;
 }
diff --git a/board/freescale/t4rdb/ddr.h b/board/freescale/t4rdb/ddr.h
index 7b854767e7..f01ebb22b5 100644
--- a/board/freescale/t4rdb/ddr.h
+++ b/board/freescale/t4rdb/ddr.h
@@ -27,16 +27,16 @@ static const struct board_specific_parameters udimm0[] = {
 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
 	 */
-	{2,  1350, 4, 4,     8, 0x0809090b, 0x0c0c0d0a},
-	{2,  1350, 0, 5,     7, 0x0709090b, 0x0c0c0d09},
-	{2,  1666, 4, 4,     8, 0x080a0a0d, 0x0d10100b},
-	{2,  1666, 0, 5,     7, 0x080a0a0c, 0x0d0d0e0a},
-	{2,  1900, 0, 4,     8, 0x090a0b0e, 0x0f11120c},
-	{2,  2140, 0, 4,     8, 0x090a0b0e, 0x0f11120c},
-	{1,  1350, 0, 5,     8, 0x0809090b, 0x0c0c0d0a},
-	{1,  1700, 0, 5,     8, 0x080a0a0c, 0x0c0d0e0a},
-	{1,  1900, 0, 4,     8, 0x080a0a0c, 0x0e0e0f0a},
-	{1,  2140, 0, 4,     8, 0x090a0b0c, 0x0e0f100b},
+	{2,  1350, 4,  8,     8, 0x0809090b, 0x0c0c0d0a},
+	{2,  1350, 0, 10,     7, 0x0709090b, 0x0c0c0d09},
+	{2,  1666, 4,  8,     8, 0x080a0a0d, 0x0d10100b},
+	{2,  1666, 0, 10,     7, 0x080a0a0c, 0x0d0d0e0a},
+	{2,  1900, 0,  8,     8, 0x090a0b0e, 0x0f11120c},
+	{2,  2140, 0,  8,     8, 0x090a0b0e, 0x0f11120c},
+	{1,  1350, 0, 10,     8, 0x0809090b, 0x0c0c0d0a},
+	{1,  1700, 0, 10,     8, 0x080a0a0c, 0x0c0d0e0a},
+	{1,  1900, 0,  8,     8, 0x080a0a0c, 0x0e0e0f0a},
+	{1,  2140, 0,  8,     8, 0x090a0b0c, 0x0e0f100b},
 	{}
 };
 
@@ -46,15 +46,15 @@ static const struct board_specific_parameters rdimm0[] = {
 	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
 	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
 	 */
-	{4,  1350, 0, 5,     9, 0x08070605, 0x06070806},
-	{4,  1666, 0, 5,    11, 0x0a080706, 0x07090906},
-	{4,  2140, 0, 5,    12, 0x0b090807, 0x080a0b07},
-	{2,  1350, 0, 5,     9, 0x08070605, 0x06070806},
-	{2,  1666, 0, 5,    11, 0x0a090806, 0x08090a06},
-	{2,  2140, 0, 5,    12, 0x0b090807, 0x080a0b07},
-	{1,  1350, 0, 5,     9, 0x08070605, 0x06070806},
-	{1,  1666, 0, 5,    11, 0x0a090806, 0x08090a06},
-	{1,  2140, 0, 4,    12, 0x0b090807, 0x080a0b07},
+	{4,  1350, 0, 10,     9, 0x08070605, 0x06070806},
+	{4,  1666, 0, 10,    11, 0x0a080706, 0x07090906},
+	{4,  2140, 0, 10,    12, 0x0b090807, 0x080a0b07},
+	{2,  1350, 0, 10,     9, 0x08070605, 0x06070806},
+	{2,  1666, 0, 10,    11, 0x0a090806, 0x08090a06},
+	{2,  2140, 0, 10,    12, 0x0b090807, 0x080a0b07},
+	{1,  1350, 0, 10,     9, 0x08070605, 0x06070806},
+	{1,  1666, 0, 10,    11, 0x0a090806, 0x08090a06},
+	{1,  2140, 0,  8,    12, 0x0b090807, 0x080a0b07},
 	{}
 };
 
diff --git a/board/freescale/t4rdb/eth.c b/board/freescale/t4rdb/eth.c
index e563a6169a..ae2451e4ba 100644
--- a/board/freescale/t4rdb/eth.c
+++ b/board/freescale/t4rdb/eth.c
@@ -77,6 +77,9 @@ int board_eth_init(bd_t *bis)
 		puts("Invalid SerDes1 protocol for T4240RDB\n");
 	}
 
+	fm_disable_port(FM1_DTSEC5);
+	fm_disable_port(FM1_DTSEC6);
+
 	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
 		interface = fm_info_get_enet_if(i);
 		switch (interface) {
@@ -115,6 +118,8 @@ int board_eth_init(bd_t *bis)
 		puts("Invalid SerDes2 protocol for T4240RDB\n");
 	}
 
+	fm_disable_port(FM2_DTSEC5);
+	fm_disable_port(FM2_DTSEC6);
 	for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
 		interface = fm_info_get_enet_if(i);
 		switch (interface) {
diff --git a/board/freescale/t4rdb/spl.c b/board/freescale/t4rdb/spl.c
index 4c1e0cc8d0..b148a7fd1f 100644
--- a/board/freescale/t4rdb/spl.c
+++ b/board/freescale/t4rdb/spl.c
@@ -80,6 +80,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 	mmc_initialize(bd);
 	mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,