diff options
author | Tim Harvey <tharvey@gateworks.com> | 2019-02-04 13:11:00 -0800 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2019-02-15 22:01:15 +0100 |
commit | 1d23f7b1ae0d54450596df92acef86b02a14326d (patch) | |
tree | 0f0eb0bb4aa60656c183607c380961afd1cc52ff /board/gateworks/gw_ventana/gw_ventana.c | |
parent | ad2efa3a289266866e62f984dbd93f0231116cdf (diff) |
imx: ventana: fix usage of dt paths with leading 0s (Linux 4.15+)
device-tree paths should never be used that reference node addresses
making an assumption about leading zeros. They should not be there per
the device-tree specification however they have been there until Linux
4.15 when they were removed via kernel commit
8dccafaa281aa1d240a58bbcdff338aec114a021.
This fixes various issues which will occur when using Linux 4.15+
that are being fixed up on a per model per PCB revision basis such as:
- enabling MMC UHS-I on board revisions that support it
- enabling PWM based on hwconfig
- fixing PCIe reset on GW552x
- removing cpu external watchdog reset on boards that do not support it
- populate PCI dt nodes based on PCI scan in order to fix GW16082
interrupt mapping and inject MAC address for PCI based GbE
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Diffstat (limited to 'board/gateworks/gw_ventana/gw_ventana.c')
-rw-r--r-- | board/gateworks/gw_ventana/gw_ventana.c | 90 |
1 files changed, 41 insertions, 49 deletions
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 0b2258e87a..c63fb41e1b 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -879,34 +879,12 @@ static int ft_sethdmiinfmt(void *blob, char *mode) return 0; } -/* enable a property of a node if the node is found */ -static inline void ft_enable_path(void *blob, const char *path) -{ - int i = fdt_path_offset(blob, path); - if (i >= 0) { - debug("enabling %s\n", path); - fdt_status_okay(blob, i); - } -} - -/* remove a property of a node if the node is found */ -static inline void ft_delprop_path(void *blob, const char *path, - const char *name) -{ - int i = fdt_path_offset(blob, path); - if (i) { - debug("removing %s/%s\n", path, name); - fdt_delprop(blob, i, name); - } -} - #if defined(CONFIG_CMD_PCI) #define PCI_ID(x) ( \ (PCI_BUS(x->devfn)<<16)| \ (PCI_DEV(x->devfn)<<11)| \ (PCI_FUNC(x->devfn)<<8) \ ) -#define PCIE_PATH "/soc/pcie@0x01000000" int fdt_add_pci_node(void *blob, int par, struct pci_dev *dev) { uint32_t reg[5]; @@ -939,7 +917,7 @@ int fdt_add_pci_path(void *blob, struct pci_dev *dev) int k, np; /* build list of parents */ - np = fdt_path_offset(blob, PCIE_PATH); + np = fdt_node_offset_by_compatible(blob, -1, "fsl,imx6q-pcie"); if (np < 0) return np; @@ -976,7 +954,7 @@ int fdt_fixup_gw16082(void *blob, int np, struct pci_dev *dev) int i; /* build irq-map based on host controllers map */ - host = fdt_path_offset(blob, PCIE_PATH); + host = fdt_node_offset_by_compatible(blob, -1, "fsl,imx6q-pcie"); if (host < 0) { printf(" %s failed: missing host\n", __func__); return host; @@ -1118,10 +1096,14 @@ void ft_board_pci_fixup(void *blob, bd_t *bd) } #endif /* if defined(CONFIG_CMD_PCI) */ -void ft_board_wdog_fixup(void *blob, const char *path) +void ft_board_wdog_fixup(void *blob, phys_addr_t addr) { - ft_delprop_path(blob, path, "ext-reset-output"); - ft_delprop_path(blob, path, "fsl,ext-reset-output"); + int off = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-wdt", addr); + + if (off) { + fdt_delprop(blob, off, "ext-reset-output"); + fdt_delprop(blob, off, "fsl,ext-reset-output"); + } } /* @@ -1133,10 +1115,11 @@ void ft_board_wdog_fixup(void *blob, const char *path) * - board (full model from EEPROM) * - peripherals removed from DTB if not loaded on board (per EEPROM config) */ -#define UART1_PATH "/soc/aips-bus@02100000/serial@021ec000" -#define WDOG1_PATH "/soc/aips-bus@02000000/wdog@020bc000" -#define WDOG2_PATH "/soc/aips-bus@02000000/wdog@020c0000" -#define GPIO3_PATH "/soc/aips-bus@02000000/gpio@020a4000" +#define WDOG1_ADDR 0x20bc000 +#define WDOG2_ADDR 0x20c0000 +#define GPIO3_ADDR 0x20a4000 +#define USDHC3_ADDR 0x2198000 +#define PWM0_ADDR 0x2080000 int ft_board_setup(void *blob, bd_t *bd) { struct ventana_board_info *info = &ventana_info; @@ -1199,14 +1182,15 @@ int ft_board_setup(void *blob, bd_t *bd) * errata causing wdog timer to be unreliable. */ if (rev >= 'A' && rev < 'C') { - i = fdt_path_offset(blob, WDOG1_PATH); + i = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-wdt", + WDOG1_ADDR); if (i) fdt_status_disabled(blob, i); } /* GW51xx-E adds WDOG1_B external reset */ if (rev < 'E') - ft_board_wdog_fixup(blob, WDOG1_PATH); + ft_board_wdog_fixup(blob, WDOG1_ADDR); break; case GW52xx: @@ -1222,7 +1206,8 @@ int ft_board_setup(void *blob, bd_t *bd) "reset-gpio", NULL); if (range) { - i = fdt_path_offset(blob, GPIO3_PATH); + i = fdt_node_offset_by_compat_reg(blob, + "fsl,imx6q-gpio", GPIO3_ADDR); if (i) handle = fdt_get_phandle(blob, i); if (handle) { @@ -1237,18 +1222,19 @@ int ft_board_setup(void *blob, bd_t *bd) gpio_cfg[board_type].usd_vsel = 0; /* GW522x-B adds WDOG1_B external reset */ - ft_board_wdog_fixup(blob, WDOG1_PATH); + if (rev < 'B') + ft_board_wdog_fixup(blob, WDOG1_ADDR); } /* GW520x-E adds WDOG1_B external reset */ else if (info->model[4] == '0' && rev < 'E') - ft_board_wdog_fixup(blob, WDOG1_PATH); + ft_board_wdog_fixup(blob, WDOG1_ADDR); break; case GW53xx: /* GW53xx-E adds WDOG1_B external reset */ if (rev < 'E') - ft_board_wdog_fixup(blob, WDOG1_PATH); + ft_board_wdog_fixup(blob, WDOG1_ADDR); break; case GW54xx: @@ -1256,13 +1242,12 @@ int ft_board_setup(void *blob, bd_t *bd) * disable serial2 node for GW54xx for compatibility with older * 3.10.x kernel that improperly had this node enabled in the DT */ - i = fdt_path_offset(blob, UART1_PATH); - if (i) - fdt_del_node(blob, i); + fdt_set_status_by_alias(blob, "serial2", FDT_STATUS_DISABLED, + 0); /* GW54xx-E adds WDOG2_B external reset */ if (rev < 'E') - ft_board_wdog_fixup(blob, WDOG2_PATH); + ft_board_wdog_fixup(blob, WDOG2_ADDR); break; case GW551x: @@ -1311,13 +1296,13 @@ int ft_board_setup(void *blob, bd_t *bd) /* GW551x-C adds WDOG1_B external reset */ if (rev < 'C') - ft_board_wdog_fixup(blob, WDOG1_PATH); + ft_board_wdog_fixup(blob, WDOG1_ADDR); break; case GW5901: case GW5902: /* GW5901/GW5901 revB adds WDOG1_B as an external reset */ if (rev < 'B') - ft_board_wdog_fixup(blob, WDOG1_PATH); + ft_board_wdog_fixup(blob, WDOG1_ADDR); break; } @@ -1331,20 +1316,27 @@ int ft_board_setup(void *blob, bd_t *bd) continue; if (hwconfig_subarg_cmp(arg, "mode", "pwm") && cfg->pwm_param) { - char path[48]; - sprintf(path, "/soc/aips-bus@02000000/pwm@%08x", - 0x02080000 + (0x4000 * (cfg->pwm_param - 1))); + phys_addr_t addr; + int off; + printf(" Enabling pwm%d for DIO%d\n", cfg->pwm_param, i); - ft_enable_path(blob, path); + addr = PWM0_ADDR + (0x4000 * (cfg->pwm_param - 1)); + off = fdt_node_offset_by_compat_reg(blob, + "fsl,imx6q-pwm", + addr); + if (off) + fdt_status_okay(blob, off); } } /* remove no-1-8-v if UHS-I support is present */ if (gpio_cfg[board_type].usd_vsel) { debug("Enabling UHS-I support\n"); - ft_delprop_path(blob, "/soc/aips-bus@02100000/usdhc@02198000", - "no-1-8-v"); + i = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-usdhc", + USDHC3_ADDR); + if (i) + fdt_delprop(blob, i, "no-1-8-v"); } #if defined(CONFIG_CMD_PCI) |