OMAP3: use a single board file for IGEP devices

Even when the IGEPv2 board and the IGEP Computer-on-Module
are different from a form factor point of view, they are
very similar in the fact that share many components and how
they are wired.

So, it is possible (and better) to have a single board file
for both devices and just use the CONFIG_MACH_TYPE to make
a differentiation between each board when needed.

This change avoids code duplication by removing 298 lines of
code and makes future maintenance easier.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>

1 files changed, 0 insertions, 176 deletions

diff --git a/board/isee/igep0020/igep0020.c b/board/isee/igep0020/igep0020.c
deleted file mode 100644
index a0f2aa3e4e..0000000000
--- a/board/isee/igep0020/igep0020.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * (C) Copyright 2010
- * ISEE 2007 SL, <www.iseebcn.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <netdev.h>
-#include <twl4030.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/omap_gpmc.h>
-#include <asm/mach-types.h>
-#include "igep0020.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* GPMC definitions for LAN9221 chips */
-static const u32 gpmc_lan_config[] = {
-    NET_LAN9221_GPMC_CONFIG1,
-    NET_LAN9221_GPMC_CONFIG2,
-    NET_LAN9221_GPMC_CONFIG3,
-    NET_LAN9221_GPMC_CONFIG4,
-    NET_LAN9221_GPMC_CONFIG5,
-    NET_LAN9221_GPMC_CONFIG6,
-};
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init(void)
-{
-	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
-	/* boot param addr */
-	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
-	return 0;
-}
-
-#ifdef CONFIG_SPL_BUILD
-/*
- * Routine: omap_rev_string
- * Description: For SPL builds output board rev
- */
-void omap_rev_string(void)
-{
-}
-
-/*
- * Routine: get_board_mem_timings
- * Description: If we use SPL then there is no x-loader nor config header
- * so we have to setup the DDR timings ourself on both banks.
- */
-void get_board_mem_timings(struct board_sdrc_timings *timings)
-{
-	timings->mr = MICRON_V_MR_165;
-#ifdef CONFIG_BOOT_NAND
-	timings->mcfg = MICRON_V_MCFG_200(256 << 20);
-	timings->ctrla = MICRON_V_ACTIMA_200;
-	timings->ctrlb = MICRON_V_ACTIMB_200;
-	timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
-#else
-	if (get_cpu_family() == CPU_OMAP34XX) {
-		timings->mcfg = NUMONYX_V_MCFG_165(256 << 20);
-		timings->ctrla = NUMONYX_V_ACTIMA_165;
-		timings->ctrlb = NUMONYX_V_ACTIMB_165;
-		timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
-
-	} else {
-		timings->mcfg = NUMONYX_V_MCFG_200(256 << 20);
-		timings->ctrla = NUMONYX_V_ACTIMA_200;
-		timings->ctrlb = NUMONYX_V_ACTIMB_200;
-		timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
-	}
-#endif
-}
-#endif
-
-/*
- * Routine: setup_net_chip
- * Description: Setting up the configuration GPMC registers specific to the
- *		Ethernet hardware.
- */
-#if defined(CONFIG_CMD_NET)
-static void setup_net_chip(void)
-{
-	struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
-
-	enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000,
-			GPMC_SIZE_16M);
-
-	/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
-	writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
-	/* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
-	writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
-	/* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
-	writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
-		&ctrl_base->gpmc_nadv_ale);
-
-	/* Make GPIO 64 as output pin and send a magic pulse through it */
-	if (!gpio_request(64, "")) {
-		gpio_direction_output(64, 0);
-		gpio_set_value(64, 1);
-		udelay(1);
-		gpio_set_value(64, 0);
-		udelay(1);
-		gpio_set_value(64, 1);
-	}
-}
-#endif
-
-#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
-int board_mmc_init(bd_t *bis)
-{
-	omap_mmc_init(0, 0, 0);
-	return 0;
-}
-#endif
-
-/*
- * Routine: misc_init_r
- * Description: Configure board specific parts
- */
-int misc_init_r(void)
-{
-	twl4030_power_init();
-
-#if defined(CONFIG_CMD_NET)
-	setup_net_chip();
-#endif
-
-	dieid_num_r();
-
-	return 0;
-}
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- *		hardware. Many pins need to be moved from protect to primary
- *		mode.
- */
-void set_muxconf_regs(void)
-{
-	MUX_DEFAULT();
-}
-
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC911X
-	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-#endif
-	return rc;
-}