powerpc, 8260: remove support for mpc8260

There was for long time no activity in the 8260 area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8260,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

1 files changed, 0 insertions, 463 deletions

diff --git a/board/keymile/km82xx/km82xx.c b/board/keymile/km82xx/km82xx.c
deleted file mode 100644
index f5a98b33e7..0000000000
--- a/board/keymile/km82xx/km82xx.c
+++ /dev/null
@@ -1,463 +0,0 @@
-/*
- * (C) Copyright 2007 - 2008
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8260.h>
-#include <ioports.h>
-#include <malloc.h>
-#include <asm/io.h>
-
-#include <libfdt.h>
-#include <i2c.h>
-#include "../common/common.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-const iop_conf_t iop_conf_tab[4][32] = {
-
-	/* Port A */
-	{	/*	      conf	ppar psor pdir podr pdat */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA31	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA30	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA29	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA28	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA27	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA26	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA25	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA24	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA23	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA22	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA21	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA20	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA19	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA18	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA17	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA16	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA15	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA14	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA13	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA12	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA11	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA10	     */
-		{ 1,		 1,   0,   1,	0,   0 }, /* PA9 SMC2 TxD    */
-		{ 1,		 1,   0,   0,	0,   0 }, /* PA8 SMC2 RxD    */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA7	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA6	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA5	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA4	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA3	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA2	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PA1	     */
-		{ 0,		 0,   0,   0,	0,   0 }  /* PA0	     */
-	},
-
-	/* Port B */
-	{	/*	      conf	ppar psor pdir podr pdat */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PB31	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PB30	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PB29	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PB28	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PB27	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PB26	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PB25	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PB24	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PB23	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PB22	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PB21	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PB20	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PB19	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PB18	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
-		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
-		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
-		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
-		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
-		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
-		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
-		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
-		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
-		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
-		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
-		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
-		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
-		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
-		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
-		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
-		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
-		{ 0,		 0,   0,   0,	0,   0 }  /* non-existent    */
-	},
-
-	/* Port C */
-	{	/*	      conf	ppar psor pdir podr pdat */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC31	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC30	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC29	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC28	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC27	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC26	     */
-		{ 1,		 1,   0,   0,	0,   0 }, /* PC25 RxClk      */
-		{ 1,		 1,   0,   0,	0,   0 }, /* PC24 TxClk      */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC23	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC22	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC21	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC20	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC19	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC18	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC17	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC16	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC15	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC14	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC13	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC12	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC11	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC10	     */
-		{ 1,		 1,   0,   0,	0,   0 }, /* PC9  SCC4: CTS  */
-		{ 1,		 1,   0,   0,	0,   0 }, /* PC8  SCC4: CD   */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC7	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC6	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC5	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC4	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC3	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC2	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC1	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PC0	     */
-	},
-
-	/* Port D */
-	{	/*	      conf	ppar psor pdir podr pdat */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD31	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD30	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD29	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD28	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD27	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD26	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD25	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD24	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD23	     */
-		{ 1,		 1,   0,   0,	0,   0 }, /* PD22 SCC4: RXD  */
-		{ 1,		 1,   0,   1,	0,   0 }, /* PD21 SCC4: TXD  */
-		{ 1,		 1,   0,   1,	0,   0 }, /* PD20 SCC4: RTS  */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD19	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD18	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD17	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD16	     */
-		{ 1,		 0,   0,   0,	1,   1 }, /* PD15	     */
-		{ 1,		 0,   0,   1,	1,   1 }, /* PD14	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD13	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD12	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD11	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD10	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD9	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD8	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD7	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD6	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD5	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* PD4	     */
-		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
-		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
-		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
-		{ 0,		 0,   0,   0,	0,   0 }  /* non-existent    */
-	}
-};
-
-/*
- * Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
- *
- * This routine performs standard 8260 initialization sequence
- * and calculates the available memory size. It may be called
- * several times to try different SDRAM configurations on both
- * 60x and local buses.
- */
-static long int try_init(memctl8260_t *memctl, ulong sdmr,
-				  ulong orx, uchar *base)
-{
-	uchar c = 0xff;
-	ulong maxsize, size;
-	int i;
-
-	/*
-	 * We must be able to test a location outsize the maximum legal size
-	 * to find out THAT we are outside; but this address still has to be
-	 * mapped by the controller. That means, that the initial mapping has
-	 * to be (at least) twice as large as the maximum expected size.
-	 */
-	maxsize = (1 + (~orx | 0x7fff))/* / 2*/;
-
-	out_be32(&memctl->memc_or1, orx);
-
-	/*
-	 * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
-	 *
-	 * "At system reset, initialization software must set up the
-	 *  programmable parameters in the memory controller banks registers
-	 *  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
-	 *  system software should execute the following initialization sequence
-	 *  for each SDRAM device.
-	 *
-	 *  1. Issue a PRECHARGE-ALL-BANKS command
-	 *  2. Issue eight CBR REFRESH commands
-	 *  3. Issue a MODE-SET command to initialize the mode register
-	 *
-	 *  The initial commands are executed by setting P/LSDMR[OP] and
-	 *  accessing the SDRAM with a single-byte transaction."
-	 *
-	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address
-	 * CONFIG_SYS_SDRAM_BASE.
-	 */
-
-	out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_PREA);
-	out_8(base, c);
-
-	out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_CBRR);
-	for (i = 0; i < 8; i++)
-		out_8(base, c);
-
-	out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_MRW);
-	/* setting MR on address lines */
-	out_8((uchar *)(base + CONFIG_SYS_MRS_OFFS), c);
-
-	out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_NORM | PSDMR_RFEN);
-	out_8(base, c);
-
-	size = get_ram_size((long *)base, maxsize);
-	out_be32(&memctl->memc_or1, orx | ~(size - 1));
-
-	return size;
-}
-
-#ifdef CONFIG_SYS_SDRAM_LIST
-
-/*
- * If CONFIG_SYS_SDRAM_LIST is defined, we cycle through all SDRAM
- * configurations therein (should be from high to lower) to find the
- * one actually matching the current configuration.
- * CONFIG_SYS_PSDMR and CONFIG_SYS_OR1 will contain the base values which are
- * common among all possible configurations; values in CONFIG_SYS_SDRAM_LIST
- * (defined as the initialization value for the array of struct sdram_conf_s)
- * will then be ORed with such base values.
- */
-
-struct sdram_conf_s {
-	ulong size;
-	int or1;
-	int psdmr;
-};
-
-static struct sdram_conf_s sdram_conf[] = CONFIG_SYS_SDRAM_LIST;
-
-static long probe_sdram(memctl8260_t *memctl)
-{
-	int n = 0;
-	long psize = 0;
-
-	for (n = 0; n < ARRAY_SIZE(sdram_conf); psize = 0, n++) {
-		psize = try_init(memctl,
-			CONFIG_SYS_PSDMR | sdram_conf[n].psdmr,
-			CONFIG_SYS_OR1 | sdram_conf[n].or1,
-			(uchar *) CONFIG_SYS_SDRAM_BASE);
-		debug("Probing %ld bytes returned %ld\n",
-			sdram_conf[n].size, psize);
-		if (psize == sdram_conf[n].size)
-			break;
-	}
-	return psize;
-}
-
-#else /* CONFIG_SYS_SDRAM_LIST */
-
-static long probe_sdram(memctl8260_t *memctl)
-{
-	return try_init(memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR1,
-					(uchar *) CONFIG_SYS_SDRAM_BASE);
-}
-#endif /* CONFIG_SYS_SDRAM_LIST */
-
-
-int dram_init(void)
-{
-	immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	memctl8260_t *memctl = &immap->im_memctl;
-
-	long psize;
-
-	out_8(&memctl->memc_psrt, CONFIG_SYS_PSRT);
-	out_be16(&memctl->memc_mptpr, CONFIG_SYS_MPTPR);
-
-	/* 60x SDRAM setup:
-	 */
-	psize = probe_sdram(memctl);
-
-	icache_enable();
-
-	gd->ram_size = psize;
-
-	return 0;
-}
-
-int checkboard(void)
-{
-#if defined(CONFIG_MGCOGE)
-	puts("Board: Keymile mgcoge");
-#else
-	puts("Board: Keymile mgcoge3ne");
-#endif
-	if (ethernet_present())
-		puts(" with PIGGY.");
-	puts("\n");
-	return 0;
-}
-
-int last_stage_init(void)
-{
-	struct bfticu_iomap *base =
-		(struct bfticu_iomap *)CONFIG_SYS_FPGA_BASE;
-	u8 dip_switch;
-
-	dip_switch = in_8(&base->mswitch);
-	dip_switch &= BFTICU_DIPSWITCH_MASK;
-	/* dip switch 'full reset' or 'db erase' or 'Local mgmt IP' or any */
-	if (dip_switch != 0) {
-		/* start bootloader */
-		puts("DIP:   Enabled\n");
-		setenv("actual_bank", "0");
-	}
-	set_km_env();
-	return 0;
-}
-
-#ifdef CONFIG_MGCOGE3NE
-static void set_pin(int state, unsigned long mask, int port);
-
-/*
- * For mgcoge3ne boards, the mgcoge3un control is controlled from
- * a GPIO line on the PPC CPU. If bobcatreset is set the line
- * will toggle once what forces the mgocge3un part to restart
- * immediately.
- */
-static void handle_mgcoge3un_reset(void)
-{
-	char *bobcatreset = getenv("bobcatreset");
-	if (bobcatreset) {
-		if (strcmp(bobcatreset, "true") == 0) {
-			puts("Forcing bobcat reset\n");
-			set_pin(0, 0x00000004, 3); /* clear PD29 (reset arm) */
-			udelay(1000);
-			set_pin(1, 0x00000004, 3);
-		} else
-			set_pin(1, 0x00000004, 3); /* don't reset arm */
-	}
-}
-#endif
-
-int ethernet_present(void)
-{
-	struct km_bec_fpga *base =
-		(struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE;
-
-	return in_8(&base->bprth) & PIGGY_PRESENT;
-}
-
-/*
- * Early board initalization.
- */
-int board_early_init_r(void)
-{
-	struct km_bec_fpga *base =
-		(struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE;
-
-	/* setup the UPIOx */
-	/* General Unit Reset disabled, Flash Bank enabled, UnitLed on */
-	out_8(&base->oprth, (WRG_RESET | H_OPORTS_14 | WRG_LED));
-	/* SCC4 enable, halfduplex, FCC1 powerdown */
-	out_8(&base->oprtl, (H_OPORTS_SCC4_ENA | H_OPORTS_SCC4_FD_ENA |
-		H_OPORTS_FCC1_PW_DWN));
-
-#ifdef CONFIG_MGCOGE3NE
-	handle_mgcoge3un_reset();
-#endif
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
-	return 0;
-}
-
-int hush_init_var(void)
-{
-	ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
-	return 0;
-}
-
-#define SDA_MASK	0x00010000
-#define SCL_MASK	0x00020000
-
-static void set_pin(int state, unsigned long mask, int port)
-{
-	ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, port);
-
-	if (state)
-		setbits_be32(&iop->pdat, mask);
-	else
-		clrbits_be32(&iop->pdat, mask);
-
-	setbits_be32(&iop->pdir, mask);
-}
-
-static int get_pin(unsigned long mask, int port)
-{
-	ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, port);
-
-	clrbits_be32(&iop->pdir, mask);
-	return 0 != (in_be32(&iop->pdat) & mask);
-}
-
-void set_sda(int state)
-{
-	set_pin(state, SDA_MASK, 3);
-}
-
-void set_scl(int state)
-{
-	set_pin(state, SCL_MASK, 3);
-}
-
-int get_sda(void)
-{
-	return get_pin(SDA_MASK, 3);
-}
-
-int get_scl(void)
-{
-	return get_pin(SCL_MASK, 3);
-}
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-
-	return 0;
-}
-
-#if defined(CONFIG_MGCOGE3NE)
-int get_testpin(void)
-{
-	/* Testpin is Port C pin 29 - enable = low */
-	int testpin = !get_pin(0x00000004, 2);
-	return testpin;
-}
-#endif