arm: add support for the suen3 board from keymile

Add support for the ARM part of the mgcoge2, named suen3.
This board is based on the Marvell Kirkwood (88F6281) SoC.
As there come more board variants, common config options
are collected in include/configs/km_arm.h. Also, this board
use common code for all keymile boards, which is stored in
board/keymile/common/common.c

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Heiko Schocher <hs@denx.de>

5 files changed, 583 insertions, 2 deletions

diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c
index ec27bdae22..7b4eefd5c8 100644
--- a/board/keymile/common/common.c
+++ b/board/keymile/common/common.c
@@ -35,6 +35,7 @@
 #include <libfdt.h>
 #endif
 
+#include "../common/common.h"
 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
 #include <i2c.h>
 
@@ -421,7 +422,6 @@ static int get_scl (void)
 
 	return ((val & SCL_BIT) == SCL_BIT);
 }
-
 #endif
 
 #if !defined(CONFIG_KMETER1)
@@ -500,7 +500,7 @@ void i2c_init_board(void)
 	out_8 (&dev->cr, (I2C_CR_MEN));
 
 #else
-#if defined(CONFIG_HARD_I2C)
+#if defined(CONFIG_HARD_I2C) && !defined(CONFIG_MACH_SUEN3)
 	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
 	volatile i2c8260_t *i2c	= (i2c8260_t *)&immap->im_i2c;
 
@@ -578,10 +578,12 @@ int fdt_get_node_and_value (void *blob,
 }
 #endif
 
+#if !defined(CONFIG_MACH_SUEN3)
 int ethernet_present (void)
 {
 	return (in_8((u8 *)CONFIG_SYS_PIGGY_BASE + CONFIG_SYS_SLOT_ID_OFF) & 0x80);
 }
+#endif
 
 int board_eth_init (bd_t *bis)
 {
diff --git a/board/keymile/km_arm/Makefile b/board/keymile/km_arm/Makefile
new file mode 100644
index 0000000000..fffc6a3b7b
--- /dev/null
+++ b/board/keymile/km_arm/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Prafulla Wadaskar <prafulla@marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o ../common/common.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/keymile/km_arm/config.mk b/board/keymile/km_arm/config.mk
new file mode 100644
index 0000000000..b9e81b26bb
--- /dev/null
+++ b/board/keymile/km_arm/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Prafulla Wadaskar <prafulla@marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+
+TEXT_BASE = 0x004000000
+
+# Kirkwood Boot Image configuration file
+KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
new file mode 100644
index 0000000000..53cf474767
--- /dev/null
+++ b/board/keymile/km_arm/km_arm.c
@@ -0,0 +1,324 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * (C) Copyright 2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2010
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <nand.h>
+#include <netdev.h>
+#include <miiphy.h>
+#include <asm/io.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/arch/mpp.h>
+
+#include "../common/common.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int	io_dev;
+extern I2C_MUX_DEVICE *i2c_mux_ident_muxstring (uchar *buf);
+
+/* Multi-Purpose Pins Functionality configuration */
+u32 kwmpp_config[] = {
+	MPP0_NF_IO2,
+	MPP1_NF_IO3,
+	MPP2_NF_IO4,
+	MPP3_NF_IO5,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP6_SYSRST_OUTn,
+	MPP7_PEX_RST_OUTn,
+#if defined(CONFIG_SOFT_I2C)
+	MPP8_GPIO,		/* SDA */
+	MPP9_GPIO,		/* SCL */
+#endif
+#if defined(CONFIG_HARD_I2C)
+	MPP8_TW_SDA,
+	MPP9_TW_SCK,
+#endif
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP12_GPO,		/* Reserved */
+	MPP13_UART1_TXD,
+	MPP14_UART1_RXD,
+	MPP15_GPIO,		/* Not used */
+	MPP16_GPIO,		/* Not used */
+	MPP17_GPIO,		/* Reserved */
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
+	MPP20_GPIO,
+	MPP21_GPIO,
+	MPP22_GPIO,
+	MPP23_GPIO,
+	MPP24_GPIO,
+	MPP25_GPIO,
+	MPP26_GPIO,
+	MPP27_GPIO,
+	MPP28_GPIO,
+	MPP29_GPIO,
+	MPP30_GPIO,
+	MPP31_GPIO,
+	MPP32_GPIO,
+	MPP33_GPIO,
+	MPP34_GPIO,		/* CDL1 (input) */
+	MPP35_GPIO,		/* CDL2 (input) */
+	MPP36_GPIO,		/* MAIN_IRQ (input) */
+	MPP37_GPIO,		/* BOARD_LED */
+	MPP38_GPIO,		/* Piggy3 LED[1] */
+	MPP39_GPIO,		/* Piggy3 LED[2] */
+	MPP40_GPIO,		/* Piggy3 LED[3] */
+	MPP41_GPIO,		/* Piggy3 LED[4] */
+	MPP42_GPIO,		/* Piggy3 LED[5] */
+	MPP43_GPIO,		/* Piggy3 LED[6] */
+	MPP44_GPIO,		/* Piggy3 LED[7] */
+	MPP45_GPIO,		/* Piggy3 LED[8] */
+	MPP46_GPIO,		/* Reserved */
+	MPP47_GPIO,		/* Reserved */
+	MPP48_GPIO,		/* Reserved */
+	MPP49_GPIO,		/* SW_INTOUTn */
+	0
+};
+
+int ethernet_present(void)
+{
+	uchar	buf;
+	int	ret = 0;
+
+	if (i2c_read(0x10, 2, 1, &buf, 1) != 0) {
+		printf ("%s: Error reading Boco\n", __FUNCTION__);
+		return -1;
+	}
+	if ((buf & 0x40) == 0x40) {
+		ret = 1;
+	}
+	return ret;
+}
+
+int misc_init_r(void)
+{
+	I2C_MUX_DEVICE	*i2cdev;
+	char *str;
+	int mach_type;
+
+	/* add I2C Bus for I/O Expander */
+	i2cdev = i2c_mux_ident_muxstring((uchar *)"pca9554a:70:a");
+	io_dev = i2cdev->busid;
+	puts("Piggy:");
+	if (ethernet_present() == 0)
+		puts (" not");
+	puts(" present\n");
+
+	str = getenv("mach_type");
+	if (str != NULL) {
+		mach_type = simple_strtoul(str, NULL, 10);
+		printf("Overwriting MACH_TYPE with %d!!!\n", mach_type);
+		gd->bd->bi_arch_number = mach_type;
+	}
+	return 0;
+}
+
+int board_init(void)
+{
+	u32 tmp;
+
+	kirkwood_mpp_conf(kwmpp_config);
+
+	/*
+	 * The FLASH_GPIO_PIN switches between using a
+	 * NAND or a SPI FLASH. Set this pin on start
+	 * to NAND mode.
+	 */
+	tmp = readl(KW_GPIO0_BASE);
+	writel(tmp | FLASH_GPIO_PIN , KW_GPIO0_BASE);
+	tmp = readl(KW_GPIO0_BASE + 4);
+	writel(tmp & (~FLASH_GPIO_PIN) , KW_GPIO0_BASE + 4);
+	printf("KM: setting NAND mode\n");
+
+	/*
+	 * arch number of board
+	 */
+	gd->bd->bi_arch_number = MACH_TYPE_SUEN3;
+
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
+
+#if defined(CONFIG_SOFT_I2C)
+	/* init the GPIO for I2C Bitbang driver */
+	kw_gpio_set_valid(SUEN3_SDA_PIN, 1);
+	kw_gpio_set_valid(SUEN3_SCL_PIN, 1);
+	kw_gpio_direction_output(SUEN3_SDA_PIN, 0);
+	kw_gpio_direction_output(SUEN3_SCL_PIN, 0);
+#endif
+#if defined(CONFIG_SYS_EEPROM_WREN)
+	kw_gpio_set_valid(SUEN3_ENV_WP, 38);
+	kw_gpio_direction_output(SUEN3_ENV_WP, 1);
+#endif
+	return 0;
+}
+
+#if defined(CONFIG_CMD_SF)
+int do_spi_toggle(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	u32 tmp;
+	if (argc < 2) {
+		cmd_usage(cmdtp);
+		return 1;
+	}
+
+	if ((strcmp(argv[1], "off") == 0)) {
+		printf("SPI FLASH disabled, NAND enabled\n");
+		/* Multi-Purpose Pins Functionality configuration */
+		kwmpp_config[0] = MPP0_NF_IO2;
+		kwmpp_config[1] = MPP1_NF_IO3;
+		kwmpp_config[2] = MPP2_NF_IO4;
+		kwmpp_config[3] = MPP3_NF_IO5;
+
+		kirkwood_mpp_conf(kwmpp_config);
+		tmp = readl(KW_GPIO0_BASE);
+		writel(tmp | FLASH_GPIO_PIN , KW_GPIO0_BASE);
+	} else if ((strcmp(argv[1], "on") == 0)) {
+		printf("SPI FLASH enabled, NAND disabled\n");
+		/* Multi-Purpose Pins Functionality configuration */
+		kwmpp_config[0] = MPP0_SPI_SCn;
+		kwmpp_config[1] = MPP1_SPI_MOSI;
+		kwmpp_config[2] = MPP2_SPI_SCK;
+		kwmpp_config[3] = MPP3_SPI_MISO;
+
+		kirkwood_mpp_conf(kwmpp_config);
+		tmp = readl(KW_GPIO0_BASE);
+		writel(tmp & (~FLASH_GPIO_PIN) , KW_GPIO0_BASE);
+	} else {
+		cmd_usage(cmdtp);
+		return 1;
+	}
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	spitoggle,	2,	0,	do_spi_toggle,
+	"En-/disable SPI FLASH access",
+	"<on|off> - Enable (on) or disable (off) SPI FLASH access\n"
+	);
+#endif
+
+int dram_init(void)
+{
+	int i;
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		gd->bd->bi_dram[i].start = kw_sdram_bar(i);
+		gd->bd->bi_dram[i].size = get_ram_size((long *)kw_sdram_bar(i),
+						       kw_sdram_bs(i));
+	}
+	return 0;
+}
+
+/* Configure and enable MV88E1118 PHY */
+void reset_phy(void)
+{
+	char *name = "egiga0";
+
+	if (miiphy_set_current_dev(name))
+		return;
+
+	/* reset the phy */
+	miiphy_reset(name, CONFIG_PHY_BASE_ADR);
+}
+
+#if defined(CONFIG_HUSH_INIT_VAR)
+int hush_init_var (void)
+{
+	ivm_read_eeprom ();
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_BOOTCOUNT_LIMIT)
+void bootcount_store (ulong a)
+{
+	volatile ulong *save_addr;
+	volatile ulong size = 0;
+	int i;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		size += gd->bd->bi_dram[i].size;
+	}
+	save_addr = (ulong*)(size - BOOTCOUNT_ADDR);
+	writel(a, save_addr);
+	writel(BOOTCOUNT_MAGIC, &save_addr[1]);
+}
+
+ulong bootcount_load (void)
+{
+	volatile ulong *save_addr;
+	volatile ulong size = 0;
+	int i;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		size += gd->bd->bi_dram[i].size;
+	}
+	save_addr = (ulong*)(size - BOOTCOUNT_ADDR);
+	if (readl(&save_addr[1]) != BOOTCOUNT_MAGIC)
+		return 0;
+	else
+		return readl(save_addr);
+}
+#endif
+
+#if defined(CONFIG_SOFT_I2C)
+void set_sda (int state)
+{
+	I2C_ACTIVE;
+	I2C_SDA(state);
+}
+
+void set_scl (int state)
+{
+	I2C_SCL(state);
+}
+
+int get_sda (void)
+{
+	I2C_TRISTATE;
+	return I2C_READ;
+}
+
+int get_scl (void)
+{
+	return (kw_gpio_get_value(SUEN3_SCL_PIN) ? 1 : 0);
+}
+#endif
+
+#if defined(CONFIG_SYS_EEPROM_WREN)
+int eeprom_write_enable (unsigned dev_addr, int state)
+{
+	kw_gpio_set_value(SUEN3_ENV_WP, !state);
+
+	return !kw_gpio_get_value(SUEN3_ENV_WP);
+}
+#endif
diff --git a/board/keymile/km_arm/kwbimage.cfg b/board/keymile/km_arm/kwbimage.cfg
new file mode 100644
index 0000000000..d6edd27943
--- /dev/null
+++ b/board/keymile/km_arm/kwbimage.cfg
@@ -0,0 +1,176 @@
+#
+# (C) Copyright 2010
+# Heiko Schocher, DENX Software Engineering, hs@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.kwimage for more details about how-to configure
+# and create kirkwood boot image
+#
+
+# Boot Media configurations
+BOOT_FROM	spi	# Boot from SPI flash
+
+DATA 0xFFD10000 0x01111111	# MPP Control 0 Register
+# bit 3-0:   MPPSel0	1, NF_IO[2]
+# bit 7-4:   MPPSel1	1, NF_IO[3]
+# bit 12-8:  MPPSel2	1, NF_IO[4]
+# bit 15-12: MPPSel3	1, NF_IO[5]
+# bit 19-16: MPPSel4	1, NF_IO[6]
+# bit 23-20: MPPSel5	1, NF_IO[7]
+# bit 27-24: MPPSel6	1, SYSRST_O
+# bit 31-28: MPPSel7	0, GPO[7]
+
+DATA 0xFFD10008 0x00001100	# MPP Control 2 Register
+# bit 3-0:   MPPSel16	0, GPIO[16]
+# bit 7-4:   MPPSel17	0, GPIO[17]
+# bit 12-8:  MPPSel18	1, NF_IO[0]
+# bit 15-12: MPPSel19	1, NF_IO[1]
+# bit 19-16: MPPSel20	0, GPIO[20]
+# bit 23-20: MPPSel21	0, GPIO[21]
+# bit 27-24: MPPSel22	0, GPIO[22]
+# bit 31-28: MPPSel23	0, GPIO[23]
+
+DATA 0xFFD100E0 0x1B1B1B1B	# IO Configuration 0 Register
+DATA 0xFFD20134 0xBBBBBBBB	# L2 RAM Timing 0 Register
+DATA 0xFFD20138 0x00BBBBBB	# L2 RAM Timing 1 Register
+DATA 0xFFD20154 0x00000200	# CPU RAM Management Control3 Register
+DATA 0xFFD2014C 0x00001C00	# CPU RAM Management Control1 Register
+DATA 0xFFD20148 0x00000001	# CPU RAM Management Control0 Register
+
+#Dram initalization
+DATA 0xFFD01400 0x43000400	# SDRAM Configuration Register
+# bit13-0:  0x400 (DDR2 clks refresh rate)
+# bit23-14: zero
+# bit24: 1= enable exit self refresh mode on DDR access
+# bit25: 1 required
+# bit29-26: zero
+# bit31-30: 01
+
+DATA 0xFFD01404 0x36343000	# DDR Controller Control Low
+		0x38543000
+# bit 3-0:  0 reserved
+# bit 4:    0=addr/cmd in smame cycle
+# bit 5:    0=clk is driven during self refresh, we don't care for APX
+# bit 6:    0=use recommended falling edge of clk for addr/cmd
+# bit14:    0=input buffer always powered up
+# bit18:    1=cpu lock transaction enabled
+# bit23-20: 3=recommended value for CL=3 and STARTBURST_DEL disabled bit31=0
+# bit27-24: 6= CL+3, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
+# bit30-28: 3 required
+# bit31:    0=no additional STARTBURST delay
+
+DATA 0xFFD01408 0x2302544B	# DDR Timing (Low) (active cycles value +1)
+# bit3-0:   TRAS lsbs
+# bit7-4:   TRCD
+# bit11- 8: TRP
+# bit15-12: TWR
+# bit19-16: TWTR
+# bit20:    TRAS msb
+# bit23-21: 0x0
+# bit27-24: TRRD
+# bit31-28: TRTP
+
+DATA 0xFFD0140C 0x00000032	#  DDR Timing (High)
+# bit6-0:   TRFC
+# bit8-7:   TR2R
+# bit10-9:  TR2W
+# bit12-11: TW2W
+# bit31-13: zero required
+
+DATA 0xFFD01410 0x0000000D	#  DDR Address Control
+# bit1-0:   01, Cs0width=x16
+# bit3-2:   11, Cs0size=1Gb
+# bit5-4:   00, Cs2width=nonexistent
+# bit7-6:   00, Cs1size =nonexistent
+# bit9-8:   00, Cs2width=nonexistent
+# bit11-10: 00, Cs2size =nonexistent
+# bit13-12: 00, Cs3width=nonexistent
+# bit15-14: 00, Cs3size =nonexistent
+# bit16:    0,  Cs0AddrSel
+# bit17:    0,  Cs1AddrSel
+# bit18:    0,  Cs2AddrSel
+# bit19:    0,  Cs3AddrSel
+# bit31-20: 0 required
+
+DATA 0xFFD01414 0x00000000	#  DDR Open Pages Control
+# bit0:    0,  OpenPage enabled
+# bit31-1: 0 required
+
+DATA 0xFFD01418 0x00000000	#  DDR Operation
+# bit3-0:   0x0, DDR cmd
+# bit31-4:  0 required
+
+DATA 0xFFD0141C 0x00000642	#  DDR Mode
+DATA 0xFFD01420 0x00000040	#  DDR Extended Mode
+# bit0:    0,  DDR DLL enabled
+# bit1:    0,  DDR drive strenght normal
+# bit2:    1,  DDR ODT control lsd disabled
+# bit5-3:  000, required
+# bit6:    1,  DDR ODT control msb, enabled
+# bit9-7:  000, required
+# bit10:   0,  differential DQS enabled
+# bit11:   0, required
+# bit12:   0, DDR output buffer enabled
+# bit31-13: 0 required
+
+DATA 0xFFD01424 0x0000F07F	#  DDR Controller Control High
+# bit2-0:  111, required
+# bit3  :  1  , MBUS Burst Chop disabled
+# bit6-4:  111, required
+# bit7  :  0
+# bit8  :  0  , no sample stage
+# bit9  :  0  , no half clock cycle addition to dataout
+# bit10 :  0  , 1/4 clock cycle skew enabled for addr/ctl signals
+# bit11 :  0  , 1/4 clock cycle skew disabled for write mesh
+# bit15-12: 1111 required
+# bit31-16: 0    required
+
+DATA 0xFFD01500 0x00000000	# CS[0]n Base address to 0x0
+DATA 0xFFD01504 0x07FFFFF1	# CS[0]n Size
+# bit0:    1,  Window enabled
+# bit1:    0,  Write Protect disabled
+# bit3-2:  00, CS0 hit selected
+# bit23-4: ones, required
+# bit31-24: 0x07, Size (i.e. 128MB)
+
+DATA 0xFFD0150C 0x00000000	# CS[1]n Size, window disabled
+DATA 0xFFD01514 0x00000000	# CS[2]n Size, window disabled
+DATA 0xFFD0151C 0x00000000	# CS[3]n Size, window disabled
+
+DATA 0xFFD01494 0x00000000	#  DDR ODT Control (Low)
+# bit3-0:  0, ODT0Rd, MODT[0] asserted during read from DRAM CS0
+# bit19-16:0, ODT0Wr, MODT[0] asserted during write to DRAM CS0
+
+DATA 0xFFD01498 0x00000000	#  DDR ODT Control (High)
+# bit1-0:  00, ODT0 controlled by ODT Control (low) register above
+# bit3-2:  00, ODT1 controlled by register
+# bit31-4: zero, required
+
+DATA 0xFFD0149C 0x0000E90F	# CPU ODT Control
+# bit3-0:  F, ODT0Rd, Internal ODT asserted during read from DRAM bank0
+# bit7-4:  0, ODT0Wr, Internal ODT asserted during write to DRAM bank0
+# bit9-8:  1, ODTEn, never active
+# bit11-10:2, DQ_ODTSel. ODT select turned on, 75 ohm
+
+DATA 0xFFD01480 0x00000001	# DDR Initialization Control
+#bit0=1, enable DDR init upon this register write
+
+# End of Header extension
+DATA 0x0 0x0