arm, keymile: updates for the arm based boards from keymile

define KM_IVM_BUS and KM_ENV_BUS macros
 KM_IVM_BUS is used to define the EEprom_ivm environment variable.
 These macros allow the reuse of these I2C addresses in other code
 locations.

remove unneeded code
  On first HW versions the BOCO FPGA was behind a MUX device. These
  HW versions are not supported anymore. And therefore this code can
  be removed.

added LED initialization for SUEN3
  The bootstat LED required to be initialized so to have a green
  colour after start-up.

define CONFIG_SYS_TEXT_BASE
  This is needed by the relocation code and is not the same for
  our ARM BEC and thus needs to be defined.

remove memsize variable
  An environment variable for memsize is not needed.
  this can be get via the board info struct.

remove unneeded double access to bi_dram[i].size field

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Luca Haab <luca.haab@keymile.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Prafulla Wadaskar <prafulla@marvell.com>

1 files changed, 31 insertions, 1 deletions

diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index 0f1a6d1d7a..cb999b23fa 100644
--- a/board/keymile/km_arm/km_arm.c
+++ b/board/keymile/km_arm/km_arm.c
@@ -117,6 +117,34 @@ int ethernet_present(void)
 	return ret;
 }
 
+int initialize_unit_leds(void)
+{
+	/*
+	 * init the unit LEDs
+	 * per default they all are
+	 * ok apart from bootstat
+	 * LED connected through BOCO
+	 * BOCO	lies at the address  0x10
+	 * LEDs are in the block CTRL_H	(addr 0x02)
+	 * BOOTSTAT LED is the first 0x01
+	 */
+	#define BOCO        0x10
+	#define CTRL_H      0x02
+	#define APPLEDMASK  0x01
+	uchar buf;
+
+	if (i2c_read(BOCO, CTRL_H, 1, &buf, 1) != 0) {
+		printf("%s: Error reading Boco\n", __func__);
+		return -1;
+	}
+	buf |= APPLEDMASK;
+	if (i2c_write(BOCO, CTRL_H, 1, &buf, 1) != 0) {
+		printf("%s: Error writing Boco\n", __func__);
+		return -1;
+	}
+	return 0;
+}
+
 int misc_init_r(void)
 {
 	char *str;
@@ -133,6 +161,9 @@ int misc_init_r(void)
 		printf("Overwriting MACH_TYPE with %d!!!\n", mach_type);
 		gd->bd->bi_arch_number = mach_type;
 	}
+
+	initialize_unit_leds();
+
 	return 0;
 }
 
@@ -239,7 +270,6 @@ void dram_init_banksize(void)
 
 	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
 		gd->bd->bi_dram[i].start = kw_sdram_bar(i);
-		gd->bd->bi_dram[i].size = kw_sdram_bs(i);
 		gd->bd->bi_dram[i].size = get_ram_size((long *)kw_sdram_bar(i),
 						       kw_sdram_bs(i));
 	}