Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell

- Various improvements to Keymile boards - mostly DT conversation
  (Pascal & Holger)
- Removal of now unsupported Keymile boards (Pascal & Holger)
- Small MVEBU PCI fix (Marek)
- Turris Omnia defconfig update (Marek)
- Misc Allied Telesis defconfig updates (Chris)

9 files changed, 132 insertions, 112 deletions

diff --git a/board/keymile/Kconfig b/board/keymile/Kconfig
index e30d64818c..acaa9289f7 100644
--- a/board/keymile/Kconfig
+++ b/board/keymile/Kconfig
@@ -9,8 +9,109 @@ config VENDOR_KM
 
 if VENDOR_KM
 
+menu "KM Board Setup"
+
+config KM_PNVRAM
+	hex "Pseudo RAM"
+	default 0x80000
+	help
+	  Start address of the pseudo non-volatile RAM for application.
+
+config KM_PHRAM
+	hex "Physical RAM"
+	default 0x17F000 if ARM
+	default 0x100000 if PPC
+	help
+	  Start address of the physical RAM, which is the mounted /var folder.
+
+config KM_RESERVED_PRAM
+	hex "Reserved RAM"
+	default 0x801000 if KIRKWOOD
+	default 0x0 if MPC83xx
+	default 0x1000 if MPC85xx
+	help
+	  Reserved physical RAM area at the end of memory for special purposes.
+
+config KM_CRAMFS_ADDR
+	hex "CRAMFS Address"
+	default 0x2400000 if KIRKWOOD
+	default 0xC00000 if MPC83xx
+	default 0x2000000 if MPC85xx
+	help
+	  Start address of the CRAMFS containing the Linux kernel.
+
+config KM_KERNEL_ADDR
+	hex "Kernel Load Address"
+	default 0x2000000 if KIRKWOOD
+	default 0x400000 if MPC83xx
+	default 0x1000000 if MPC85xx
+	help
+	  Address where to load Linux kernel in RAM.
+
+config KM_FDT_ADDR
+	hex "FDT Load Address"
+	default 0x23E0000 if KIRKWOOD
+	default 0xB80000 if MPC83xx
+	default 0x1F80000 if MPC85xx
+	help
+	  Address where to load flattened device tree in RAM.
+
+config KM_CONSOLE_TTY
+	string "KM Console"
+	default "ttyS0"
+	help
+	  TTY console to use on board.
+
+config KM_COMMON_ETH_INIT
+	bool "Common Ethernet Initialization"
+	default y if KIRKWOOD || MPC83xx
+	default n if MPC85xx
+	help
+	  Use the Ethernet initialization implemented in common code, which
+	  detects if a Piggy board is present.
+
+config PIGGY_MAC_ADRESS_OFFSET
+	int "Piggy Address Offset"
+	default 0
+	help
+	  MAC address offset for the Piggy board.
+
+config KM_MVEXTSW_ADDR
+	hex "Marvell Switch Address"
+	depends on MV88E6352_SWITCH
+	default 0x10
+	help
+	  Address of external Marvell switch.
+
+config KM_IVM_BUS
+	int "IVM I2C Bus"
+	default 1 if KIRKWOOD || MPC85xx
+	default 2 if MPC83xx
+	help
+	  Identifier number of I2C bus, where the inventory EEPROM is connected to.
+
+config SYS_IVM_EEPROM_ADR
+	hex "IVM I2C Address"
+	default 0x50
+	help
+	  I2C address of the EEPROM containing the inventory.
+
+config SYS_IVM_EEPROM_MAX_LEN
+	hex "IVM Length"
+	default 0x400
+	help
+	  Maximum length of inventory in EEPROM.
+
+config SYS_IVM_EEPROM_PAGE_LEN
+	hex "IVM Page Size"
+	default 0x100
+	help
+	  Page size of inventory in EEPROM.
+
 source "board/keymile/km83xx/Kconfig"
 source "board/keymile/kmp204x/Kconfig"
 source "board/keymile/km_arm/Kconfig"
 
+endmenu
+
 endif
diff --git a/board/keymile/common/common.h b/board/keymile/common/common.h
index 859d9130a9..42b760dc6e 100644
--- a/board/keymile/common/common.h
+++ b/board/keymile/common/common.h
@@ -120,10 +120,6 @@ struct bfticu_iomap {
 	u8	pb_dbug;
 };
 
-#if !defined(CONFIG_PIGGY_MAC_ADRESS_OFFSET)
-#define CONFIG_PIGGY_MAC_ADRESS_OFFSET	0
-#endif
-
 int ethernet_present(void);
 int ivm_read_eeprom(unsigned char *buf, int len);
 int ivm_analyze_eeprom(unsigned char *buf, int len);
diff --git a/board/keymile/common/ivm.c b/board/keymile/common/ivm.c
index da0634f01b..50df44d1c1 100644
--- a/board/keymile/common/ivm.c
+++ b/board/keymile/common/ivm.c
@@ -311,11 +311,6 @@ static int ivm_populate_env(unsigned char *buf, int len)
 	/* if an offset is defined, add it */
 	process_mac(valbuf, page2, CONFIG_PIGGY_MAC_ADRESS_OFFSET, true);
 	env_set((char *)"ethaddr", (char *)valbuf);
-#ifdef CONFIG_KMVECT1
-/* KMVECT1 has two ethernet interfaces */
-	process_mac(valbuf, page2, 1, true);
-	env_set((char *)"eth1addr", (char *)valbuf);
-#endif
 #else
 /* KMTEGR1 has a special setup. eth0 has no connection to the outside and
  * gets an locally administred MAC address, eth1 is the debug interface and
diff --git a/board/keymile/km83xx/Kconfig b/board/keymile/km83xx/Kconfig
index 0a41be57f5..1011cc8b2c 100644
--- a/board/keymile/km83xx/Kconfig
+++ b/board/keymile/km83xx/Kconfig
@@ -38,25 +38,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 
 endif
 
-if TARGET_KMVECT1
-
-config SYS_BOARD
-	default "km83xx"
-
-config SYS_VENDOR
-	default "keymile"
-
-config SYS_CONFIG_NAME
-	default "kmvect1"
-
-config BOARD_SPECIFIC_OPTIONS # dummy
-	def_bool y
-	select ARCH_MPC8309
-	imply CMD_CRAMFS
-	imply FS_CRAMFS
-
-endif
-
 if TARGET_KMTEGR1
 
 config SYS_BOARD
diff --git a/board/keymile/km83xx/MAINTAINERS b/board/keymile/km83xx/MAINTAINERS
index 94e0d572e2..d2af983073 100644
--- a/board/keymile/km83xx/MAINTAINERS
+++ b/board/keymile/km83xx/MAINTAINERS
@@ -10,7 +10,6 @@ F:	configs/kmopti2_defconfig
 F:	configs/kmtepr2_defconfig
 F:	include/configs/suvd3.h
 F:	configs/kmtegr1_defconfig
-F:	configs/kmvect1_defconfig
 F:	configs/suvd3_defconfig
 F:	configs/tuge1_defconfig
 F:	configs/tuxx1_defconfig
diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c
index 51778368d9..8846b64f7d 100644
--- a/board/keymile/km83xx/km83xx.c
+++ b/board/keymile/km83xx/km83xx.c
@@ -125,19 +125,10 @@ static int piggy_present(void)
 	return in_8(&base->bprth) & PIGGY_PRESENT;
 }
 
-#if defined(CONFIG_KMVECT1)
-int ethernet_present(void)
-{
-	/* ethernet port connected to simple switch without piggy */
-	return 1;
-}
-#else
 int ethernet_present(void)
 {
 	return piggy_present();
 }
-#endif
-
 
 int board_early_init_r(void)
 {
@@ -198,80 +189,8 @@ int misc_init_r(void)
 	return 0;
 }
 
-#if defined(CONFIG_KMVECT1)
-#include <mv88e6352.h>
-/* Marvell MV88E6122 switch configuration */
-static struct mv88e_sw_reg extsw_conf[] = {
-	/* port 1, FRONT_MDI, autoneg */
-	{ PORT(1), PORT_PHY, NO_SPEED_FOR },
-	{ PORT(1), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
-	{ PHY(1), PHY_1000_CTRL, NO_ADV },
-	{ PHY(1), PHY_SPEC_CTRL, AUTO_MDIX_EN },
-	{ PHY(1), PHY_CTRL, PHY_100_MBPS | AUTONEG_EN | AUTONEG_RST |
-		FULL_DUPLEX },
-	/* port 2, unused */
-	{ PORT(2), PORT_CTRL, PORT_DIS },
-	{ PHY(2), PHY_CTRL, PHY_PWR_DOWN },
-	{ PHY(2), PHY_SPEC_CTRL, SPEC_PWR_DOWN },
-	/* port 3, BP_MII (CPU), PHY mode, 100BASE */
-	{ PORT(3), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
-	/* port 4, ESTAR to slot 11, SerDes, 1000BASE-X */
-	{ PORT(4), PORT_STATUS, NO_PHY_DETECT },
-	{ PORT(4), PORT_PHY, SPEED_1000_FOR },
-	{ PORT(4), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
-	/* port 5, ESTAR to slot 13, SerDes, 1000BASE-X */
-	{ PORT(5), PORT_STATUS, NO_PHY_DETECT },
-	{ PORT(5), PORT_PHY, SPEED_1000_FOR },
-	{ PORT(5), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
-	/*
-	 * Errata Fix: 1.9V Output from Internal 1.8V Regulator,
-	 * acc . MV-S300889-00D.pdf , clause 4.5
-	 */
-	{ PORT(5), 0x1A, 0xADB1 },
-	/* port 6, unused, this port has no phy */
-	{ PORT(6), PORT_CTRL, PORT_DIS },
-	/*
-	 * Errata Fix: 1.9V Output from Internal 1.8V Regulator,
-	 * acc . MV-S300889-00D.pdf , clause 4.5
-	 */
-	{ PORT(5), 0x1A, 0xADB1 },
-};
-#endif
-
 int last_stage_init(void)
 {
-#if defined(CONFIG_KMVECT1)
-	struct km_bec_fpga __iomem *base =
-		(struct km_bec_fpga __iomem *)CONFIG_SYS_KMBEC_FPGA_BASE;
-	u8 tmp_reg;
-
-	/* Release mv88e6122 from reset */
-	tmp_reg = in_8(&base->res1[0]) | 0x10; /* DIRECT3 register */
-	out_8(&base->res1[0], tmp_reg);	       /* GP28 as output */
-	tmp_reg = in_8(&base->gprt3) | 0x10;   /* GP28 to high */
-	out_8(&base->gprt3, tmp_reg);
-
-	/* configure MV88E6122 switch */
-	char *name = "UEC2";
-
-	if (miiphy_set_current_dev(name))
-		return 0;
-
-	mv88e_sw_program(name, CONFIG_KM_MVEXTSW_ADDR, extsw_conf,
-		ARRAY_SIZE(extsw_conf));
-
-	mv88e_sw_reset(name, CONFIG_KM_MVEXTSW_ADDR);
-
-	if (piggy_present()) {
-		env_set("ethact", "UEC2");
-		env_set("netdev", "eth1");
-		puts("using PIGGY for network boot\n");
-	} else {
-		env_set("netdev", "eth0");
-		puts("using frontport for network boot\n");
-	}
-#endif
-
 #if defined(CONFIG_TARGET_KMCOGE5NE)
 	struct bfticu_iomap *base =
 		(struct bfticu_iomap *)CONFIG_SYS_BFTIC3_BASE;
diff --git a/board/keymile/km_arm/Kconfig b/board/keymile/km_arm/Kconfig
index 19c1db3bc2..be6b162815 100644
--- a/board/keymile/km_arm/Kconfig
+++ b/board/keymile/km_arm/Kconfig
@@ -1,3 +1,32 @@
+menu "KM ARM Options"
+	depends on ARM
+
+config KM_FPGA_CONFIG
+	bool "FPGA Configuration"
+	default n
+	help
+	  Include capability to change FPGA configuration.
+
+config KM_ENV_IS_IN_SPI_NOR
+	bool "Environment in SPI NOR"
+	default n
+	help
+	  Put the U-Boot environment in the SPI NOR flash.
+
+config KM_PIGGY4_88E6061
+	bool "Piggy via Switch 88E6061"
+	default n
+	help
+	  The Piggy4 board is connected via a Marvell 88E6061 switch.
+
+config KM_PIGGY4_88E6352
+	bool "Piggy via Switch 88E6352"
+	default n
+	help
+	  The Piggy4 board is connected via a Marvell 88E6352 switch.
+
+endmenu
+
 if TARGET_KM_KIRKWOOD
 
 config SYS_BOARD
@@ -13,6 +42,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	def_bool y
 	select BOARD_LATE_INIT
 	select DM
+	select DM_ETH
+	select DM_SERIAL
 	select DM_SPI
 	select DM_SPI_FLASH
 	imply CMD_CRAMFS
diff --git a/board/keymile/km_arm/MAINTAINERS b/board/keymile/km_arm/MAINTAINERS
index d156e8574b..d80589ded7 100644
--- a/board/keymile/km_arm/MAINTAINERS
+++ b/board/keymile/km_arm/MAINTAINERS
@@ -11,4 +11,3 @@ F:	configs/kmnusa_defconfig
 F:	configs/kmsugp1_defconfig
 F:	configs/kmsuv31_defconfig
 F:	configs/mgcoge3un_defconfig
-F:	configs/portl2_defconfig
diff --git a/board/keymile/kmp204x/MAINTAINERS b/board/keymile/kmp204x/MAINTAINERS
index c5170c97e7..fb3aefdd37 100644
--- a/board/keymile/kmp204x/MAINTAINERS
+++ b/board/keymile/kmp204x/MAINTAINERS
@@ -4,4 +4,3 @@ S:	Maintained
 F:	board/keymile/kmp204x/
 F:	include/configs/kmp204x.h
 F:	configs/kmcoge4_defconfig
-F:	configs/kmlion1_defconfig