ARM: remove broken "lart" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Alex Züpke <azu@sysgo.de>

6 files changed, 0 insertions, 897 deletions

diff --git a/board/lart/Makefile b/board/lart/Makefile
deleted file mode 100644
index 463bc0bade..0000000000
--- a/board/lart/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	:= lart.o flash.o
-SOBJS	:= flashasm.o lowlevel_init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/lart/config.mk b/board/lart/config.mk
deleted file mode 100644
index b6b5e4da32..0000000000
--- a/board/lart/config.mk
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# LART board with SA1100 cpu
-#
-# see http://www.lart.tudelft.nl/ for more information on LART
-#
-
-#
-# LART has 4 banks of 8 MB DRAM
-#
-# c000'0000
-# c100'0000
-# c800'0000
-# c900'0000
-#
-# Linux-Kernel is expected to be at c000'8000, entry c000'8000
-#
-# we load ourself to c178'0000, the upper 1 MB of second bank
-#
-# download areas is c800'0000
-#
-
-
-CONFIG_SYS_TEXT_BASE = 0xc1780000
diff --git a/board/lart/flash.c b/board/lart/flash.c
deleted file mode 100644
index 408c88498e..0000000000
--- a/board/lart/flash.c
+++ /dev/null
@@ -1,476 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-ulong myflush(void);
-
-
-#define FLASH_BANK_SIZE 0x800000
-#define MAIN_SECT_SIZE  0x20000
-#define PARAM_SECT_SIZE 0x4000
-
-/* puzzle magic for lart
- * data_*_flash are def'd in flashasm.S
- */
-
-extern u32 data_from_flash(u32);
-extern u32 data_to_flash(u32);
-
-#define PUZZLE_FROM_FLASH(x)	data_from_flash((x))
-#define PUZZLE_TO_FLASH(x)	data_to_flash((x))
-
-flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-
-#define CMD_READ_ARRAY		0x00FF00FF
-#define CMD_IDENTIFY		0x00900090
-#define CMD_ERASE_SETUP		0x00200020
-#define CMD_ERASE_CONFIRM	0x00D000D0
-#define CMD_PROGRAM		0x00400040
-#define CMD_RESUME		0x00D000D0
-#define CMD_SUSPEND		0x00B000B0
-#define CMD_STATUS_READ		0x00700070
-#define CMD_STATUS_RESET	0x00500050
-
-#define BIT_BUSY		0x00800080
-#define BIT_ERASE_SUSPEND	0x00400040
-#define BIT_ERASE_ERROR		0x00200020
-#define BIT_PROGRAM_ERROR	0x00100010
-#define BIT_VPP_RANGE_ERROR	0x00080008
-#define BIT_PROGRAM_SUSPEND	0x00040004
-#define BIT_PROTECT_ERROR	0x00020002
-#define BIT_UNDEFINED		0x00010001
-
-#define BIT_SEQUENCE_ERROR	0x00300030
-#define BIT_TIMEOUT		0x80000000
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init(void)
-{
-    int i, j;
-    ulong size = 0;
-
-    for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
-    {
-	ulong flashbase = 0;
-	flash_info[i].flash_id =
-	  (INTEL_MANUFACT & FLASH_VENDMASK) |
-	  (INTEL_ID_28F160F3B & FLASH_TYPEMASK);
-	flash_info[i].size = FLASH_BANK_SIZE;
-	flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-	if (i == 0)
-	  flashbase = PHYS_FLASH_1;
-	else
-	  panic("configured too many flash banks!\n");
-	for (j = 0; j < flash_info[i].sector_count; j++)
-	{
-	    if (j <= 7)
-	    {
-		flash_info[i].start[j] = flashbase + j * PARAM_SECT_SIZE;
-	    }
-	    else
-	    {
-		flash_info[i].start[j] = flashbase + (j - 7)*MAIN_SECT_SIZE;
-	    }
-	}
-	size += flash_info[i].size;
-    }
-
-    /* Protect monitor and environment sectors
-     */
-    flash_protect(FLAG_PROTECT_SET,
-		  CONFIG_SYS_FLASH_BASE,
-		  CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
-		  &flash_info[0]);
-
-    flash_protect(FLAG_PROTECT_SET,
-		  CONFIG_ENV_ADDR,
-		  CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
-		  &flash_info[0]);
-
-    return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-    int i;
-
-    switch (info->flash_id & FLASH_VENDMASK)
-    {
-    case (INTEL_MANUFACT & FLASH_VENDMASK):
-	printf("Intel: ");
-	break;
-    default:
-	printf("Unknown Vendor ");
-	break;
-    }
-
-    switch (info->flash_id & FLASH_TYPEMASK)
-    {
-    case (INTEL_ID_28F160F3B & FLASH_TYPEMASK):
-	printf("2x 28F160F3B (16Mbit)\n");
-	break;
-    default:
-	printf("Unknown Chip Type\n");
-	goto Done;
-	break;
-    }
-
-    printf("  Size: %ld MB in %d Sectors\n",
-	   info->size >> 20, info->sector_count);
-
-    printf("  Sector Start Addresses:");
-    for (i = 0; i < info->sector_count; i++)
-    {
-	if ((i % 5) == 0)
-	{
-	    printf ("\n   ");
-	}
-	printf (" %08lX%s", info->start[i],
-		info->protect[i] ? " (RO)" : "     ");
-    }
-    printf ("\n");
-
-Done:
-    ;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_error (ulong code)
-{
-	/* Check bit patterns */
-	/* SR.7=0 is busy, SR.7=1 is ready */
-	/* all other flags indicate error on 1 */
-	/* SR.0 is undefined */
-	/* Timeout is our faked flag */
-
-	/* sequence is described in Intel 290644-005 document */
-
-	/* check Timeout */
-	if (code & BIT_TIMEOUT)
-	{
-		printf ("Timeout\n");
-		return ERR_TIMOUT;
-	}
-
-	/* check Busy, SR.7 */
-	if (~code & BIT_BUSY)
-	{
-		printf ("Busy\n");
-		return ERR_PROG_ERROR;
-	}
-
-	/* check Vpp low, SR.3 */
-	if (code & BIT_VPP_RANGE_ERROR)
-	{
-		printf ("Vpp range error\n");
-		return ERR_PROG_ERROR;
-	}
-
-	/* check Device Protect Error, SR.1 */
-	if (code & BIT_PROTECT_ERROR)
-	{
-		printf ("Device protect error\n");
-		return ERR_PROG_ERROR;
-	}
-
-	/* check Command Seq Error, SR.4 & SR.5 */
-	if (code & BIT_SEQUENCE_ERROR)
-	{
-		printf ("Command seqence error\n");
-		return ERR_PROG_ERROR;
-	}
-
-	/* check Block Erase Error, SR.5 */
-	if (code & BIT_ERASE_ERROR)
-	{
-		printf ("Block erase error\n");
-		return ERR_PROG_ERROR;
-	}
-
-	/* check Program Error, SR.4 */
-	if (code & BIT_PROGRAM_ERROR)
-	{
-		printf ("Program error\n");
-		return ERR_PROG_ERROR;
-	}
-
-	/* check Block Erase Suspended, SR.6 */
-	if (code & BIT_ERASE_SUSPEND)
-	{
-		printf ("Block erase suspended\n");
-		return ERR_PROG_ERROR;
-	}
-
-	/* check Program Suspended, SR.2 */
-	if (code & BIT_PROGRAM_SUSPEND)
-	{
-		printf ("Program suspended\n");
-		return ERR_PROG_ERROR;
-	}
-
-	/* OK, no error */
-	return ERR_OK;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-    ulong result;
-    int iflag, cflag, prot, sect;
-    int rc = ERR_OK;
-    ulong start;
-
-    /* first look for protection bits */
-
-    if (info->flash_id == FLASH_UNKNOWN)
-	return ERR_UNKNOWN_FLASH_TYPE;
-
-    if ((s_first < 0) || (s_first > s_last)) {
-	return ERR_INVAL;
-    }
-
-    if ((info->flash_id & FLASH_VENDMASK) !=
-	(INTEL_MANUFACT & FLASH_VENDMASK)) {
-	return ERR_UNKNOWN_FLASH_VENDOR;
-    }
-
-    prot = 0;
-    for (sect=s_first; sect<=s_last; ++sect) {
-	if (info->protect[sect]) {
-	    prot++;
-	}
-    }
-    if (prot)
-	return ERR_PROTECTED;
-
-    /*
-     * Disable interrupts which might cause a timeout
-     * here. Remember that our exception vectors are
-     * at address 0 in the flash, and we don't want a
-     * (ticker) exception to happen while the flash
-     * chip is in programming mode.
-     */
-    cflag = icache_status();
-    icache_disable();
-    iflag = disable_interrupts();
-
-    /* Start erase on unprotected sectors */
-    for (sect = s_first; sect<=s_last && !ctrlc(); sect++)
-    {
-	printf("Erasing sector %2d ... ", sect);
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	if (info->protect[sect] == 0)
-	{	/* not protected */
-	    vu_long *addr = (vu_long *)(info->start[sect]);
-
-	    *addr = PUZZLE_TO_FLASH(CMD_STATUS_RESET);
-	    *addr = PUZZLE_TO_FLASH(CMD_ERASE_SETUP);
-	    *addr = PUZZLE_TO_FLASH(CMD_ERASE_CONFIRM);
-
-	    /* wait until flash is ready */
-	    do
-	    {
-		/* check timeout */
-		if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT)
-		{
-		    *addr = PUZZLE_TO_FLASH(CMD_SUSPEND);
-		    result = BIT_TIMEOUT;
-		    break;
-		}
-
-		result = PUZZLE_FROM_FLASH(*addr);
-	    }  while (~result & BIT_BUSY);
-
-	    *addr = PUZZLE_TO_FLASH(CMD_READ_ARRAY);
-
-	    if ((rc = flash_error(result)) != ERR_OK)
-		goto outahere;
-
-	    printf("ok.\n");
-	}
-	else /* it was protected */
-	{
-	    printf("protected!\n");
-	}
-    }
-
-    if (ctrlc())
-      printf("User Interrupt!\n");
-
-outahere:
-    /* allow flash to settle - wait 10 ms */
-    udelay_masked(10000);
-
-    if (iflag)
-      enable_interrupts();
-
-    if (cflag)
-      icache_enable();
-
-    return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-    vu_long *addr = (vu_long *)dest;
-    ulong result;
-    int rc = ERR_OK;
-    int cflag, iflag;
-    ulong start;
-
-    /* Check if Flash is (sufficiently) erased
-     */
-    result = PUZZLE_FROM_FLASH(*addr);
-    if ((result & data) != data)
-	return ERR_NOT_ERASED;
-
-    /*
-     * Disable interrupts which might cause a timeout
-     * here. Remember that our exception vectors are
-     * at address 0 in the flash, and we don't want a
-     * (ticker) exception to happen while the flash
-     * chip is in programming mode.
-     */
-    cflag = icache_status();
-    icache_disable();
-    iflag = disable_interrupts();
-
-    *addr = PUZZLE_TO_FLASH(CMD_STATUS_RESET);
-    *addr = PUZZLE_TO_FLASH(CMD_PROGRAM);
-    *addr = data;
-
-    /* arm simple, non interrupt dependent timer */
-    start = get_timer(0);
-
-    /* wait until flash is ready */
-    do
-    {
-	/* check timeout */
-	if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT)
-	{
-	    *addr = PUZZLE_TO_FLASH(CMD_SUSPEND);
-	    result = BIT_TIMEOUT;
-	    break;
-	}
-
-	result = PUZZLE_FROM_FLASH(*addr);
-    }  while (~result & BIT_BUSY);
-
-    *addr = PUZZLE_TO_FLASH(CMD_READ_ARRAY);
-
-    rc = flash_error(result);
-
-    if (iflag)
-      enable_interrupts();
-
-    if (cflag)
-      icache_enable();
-
-    return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-    ulong cp, wp, data;
-    int l;
-    int i, rc;
-
-    wp = (addr & ~3);	/* get lower word aligned address */
-
-    /*
-     * handle unaligned start bytes
-     */
-    if ((l = addr - wp) != 0) {
-	data = 0;
-	for (i=0, cp=wp; i<l; ++i, ++cp) {
-	    data = (data >> 8) | (*(uchar *)cp << 24);
-	}
-	for (; i<4 && cnt>0; ++i) {
-	    data = (data >> 8) | (*src++ << 24);
-	    --cnt;
-	    ++cp;
-	}
-	for (; cnt==0 && i<4; ++i, ++cp) {
-	    data = (data >> 8) | (*(uchar *)cp << 24);
-	}
-
-	if ((rc = write_word(info, wp, data)) != 0) {
-	    return (rc);
-	}
-	wp += 4;
-    }
-
-    /*
-     * handle word aligned part
-     */
-    while (cnt >= 4) {
-	data = *((vu_long*)src);
-	if ((rc = write_word(info, wp, data)) != 0) {
-	    return (rc);
-	}
-	src += 4;
-	wp  += 4;
-	cnt -= 4;
-    }
-
-    if (cnt == 0) {
-	return ERR_OK;
-    }
-
-    /*
-     * handle unaligned tail bytes
-     */
-    data = 0;
-    for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-	data = (data >> 8) | (*src++ << 24);
-	--cnt;
-    }
-    for (; i<4; ++i, ++cp) {
-	data = (data >> 8) | (*(uchar *)cp << 24);
-    }
-
-    return write_word(info, wp, data);
-}
diff --git a/board/lart/flashasm.S b/board/lart/flashasm.S
deleted file mode 100644
index 9021972cb4..0000000000
--- a/board/lart/flashasm.S
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * flashasm.S: flash magic for LART
- *
- * Copyright (C) 1999 2000 2001 Jan-Derk bakker (J.D.Bakker@its.tudelft.nl)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-.text
-
-
-.globl	data_to_flash
-.globl	data_from_flash
-	/* Subroutine that takes data in r0 and formats it so it will be in */
-	/* the correct order for the internal flash */
-	/* used for LART only */
-data_to_flash:
-	mov	r1, #0x0
-
-	tst	r0, #0x00000001
-	orrne	r1, r1, #0x00001000
-	tst	r0, #0x00000002
-	orrne	r1, r1, #0x00004000
-	tst	r0, #0x00000004
-	orrne	r1, r1, #0x00000800
-	tst	r0, #0x00000008
-	orrne	r1, r1, #0x00000200
-	tst	r0, #0x00000010
-	orrne	r1, r1, #0x00000001
-	tst	r0, #0x00000020
-	orrne	r1, r1, #0x00000004
-	tst	r0, #0x00000040
-	orrne	r1, r1, #0x00000080
-	tst	r0, #0x00000080
-	orrne	r1, r1, #0x00000020
-
-	tst	r0, #0x00000100
-	orrne	r1, r1, #0x00002000
-	tst	r0, #0x00000200
-	orrne	r1, r1, #0x00008000
-	tst	r0, #0x00000400
-	orrne	r1, r1, #0x00000400
-	tst	r0, #0x00000800
-	orrne	r1, r1, #0x00000100
-	tst	r0, #0x00001000
-	orrne	r1, r1, #0x00000002
-	tst	r0, #0x00002000
-	orrne	r1, r1, #0x00000008
-	tst	r0, #0x00004000
-	orrne	r1, r1, #0x00000040
-	tst	r0, #0x00008000
-	orrne	r1, r1, #0x00000010
-
-	tst	r0, #0x00010000
-	orrne	r1, r1, #0x00100000
-	tst	r0, #0x00020000
-	orrne	r1, r1, #0x00400000
-	tst	r0, #0x00040000
-	orrne	r1, r1, #0x00080000
-	tst	r0, #0x00080000
-	orrne	r1, r1, #0x00020000
-	tst	r0, #0x00100000
-	orrne	r1, r1, #0x01000000
-	tst	r0, #0x00200000
-	orrne	r1, r1, #0x04000000
-	tst	r0, #0x00400000
-	orrne	r1, r1, #0x80000000
-	tst	r0, #0x00800000
-	orrne	r1, r1, #0x20000000
-
-	tst	r0, #0x01000000
-	orrne	r1, r1, #0x00200000
-	tst	r0, #0x02000000
-	orrne	r1, r1, #0x00800000
-	tst	r0, #0x04000000
-	orrne	r1, r1, #0x00040000
-	tst	r0, #0x08000000
-	orrne	r1, r1, #0x00010000
-	tst	r0, #0x10000000
-	orrne	r1, r1, #0x02000000
-	tst	r0, #0x20000000
-	orrne	r1, r1, #0x08000000
-	tst	r0, #0x40000000
-	orrne	r1, r1, #0x40000000
-	tst	r0, #0x80000000
-	orrne	r1, r1, #0x10000000
-
-	mov	r0, r1
-	mov	pc, lr
-
-	/* Takes data received from the flash, and unshuffles it. */
-data_from_flash:
-	mov	r1, #0x00
-
-	tst	r0, #0x00000001
-	orrne	r1, r1, #0x00000010
-	tst	r0, #0x00000002
-	orrne	r1, r1, #0x00001000
-	tst	r0, #0x00000004
-	orrne	r1, r1, #0x00000020
-	tst	r0, #0x00000008
-	orrne	r1, r1, #0x00002000
-	tst	r0, #0x00000010
-	orrne	r1, r1, #0x00008000
-	tst	r0, #0x00000020
-	orrne	r1, r1, #0x00000080
-	tst	r0, #0x00000040
-	orrne	r1, r1, #0x00004000
-	tst	r0, #0x00000080
-	orrne	r1, r1, #0x00000040
-
-	tst	r0, #0x00000100
-	orrne	r1, r1, #0x00000800
-	tst	r0, #0x00000200
-	orrne	r1, r1, #0x00000008
-	tst	r0, #0x00000400
-	orrne	r1, r1, #0x00000400
-	tst	r0, #0x00000800
-	orrne	r1, r1, #0x00000004
-	tst	r0, #0x00001000
-	orrne	r1, r1, #0x00000001
-	tst	r0, #0x00002000
-	orrne	r1, r1, #0x00000100
-	tst	r0, #0x00004000
-	orrne	r1, r1, #0x00000002
-	tst	r0, #0x00008000
-	orrne	r1, r1, #0x00000200
-
-	tst	r0, #0x00010000
-	orrne	r1, r1, #0x08000000
-	tst	r0, #0x00020000
-	orrne	r1, r1, #0x00080000
-	tst	r0, #0x00040000
-	orrne	r1, r1, #0x04000000
-	tst	r0, #0x00080000
-	orrne	r1, r1, #0x00040000
-	tst	r0, #0x00100000
-	orrne	r1, r1, #0x00010000
-	tst	r0, #0x00200000
-	orrne	r1, r1, #0x01000000
-	tst	r0, #0x00400000
-	orrne	r1, r1, #0x00020000
-	tst	r0, #0x00800000
-	orrne	r1, r1, #0x02000000
-
-	tst	r0, #0x01000000
-	orrne	r1, r1, #0x00100000
-	tst	r0, #0x02000000
-	orrne	r1, r1, #0x10000000
-	tst	r0, #0x04000000
-	orrne	r1, r1, #0x00200000
-	tst	r0, #0x08000000
-	orrne	r1, r1, #0x20000000
-	tst	r0, #0x10000000
-	orrne	r1, r1, #0x80000000
-	tst	r0, #0x20000000
-	orrne	r1, r1, #0x00800000
-	tst	r0, #0x40000000
-	orrne	r1, r1, #0x40000000
-	tst	r0, #0x80000000
-	orrne	r1, r1, #0x00400000
-
-	mov	r0, r1
-	mov	pc, lr
diff --git a/board/lart/lart.c b/board/lart/lart.c
deleted file mode 100644
index a0b459f2f2..0000000000
--- a/board/lart/lart.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-	/* memory and cpu-speed are setup before relocation */
-	/* so we do _nothing_ here */
-
-	/* arch number of LART-Board */
-	gd->bd->bi_arch_number = MACH_TYPE_LART;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0xc0000100;
-
-	return 0;
-}
-
-int dram_init (void)
-{
-	bd_t *bd = gd->bd;
-
-	bd->bi_dram[0].start = PHYS_SDRAM_1;
-	bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-	bd->bi_dram[1].start = PHYS_SDRAM_2;
-	bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-	bd->bi_dram[2].start = PHYS_SDRAM_3;
-	bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
-	bd->bi_dram[3].start = PHYS_SDRAM_4;
-	bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
-
-	return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_CS8900
-	rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
-	return rc;
-}
-#endif
diff --git a/board/lart/lowlevel_init.S b/board/lart/lowlevel_init.S
deleted file mode 100644
index db9fd63def..0000000000
--- a/board/lart/lowlevel_init.S
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
- *                     Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-
-
-/* some parameters for the board */
-
-MEM_BASE:	.long	0xa0000000
-MEM_START:	.long	0xc0000000
-
-#define	MDCNFG	0x00
-#define MDCAS0	0x04
-#define MDCAS1	0x08
-#define MDCAS2	0x0c
-#define MSC0	0x10
-#define MSC1	0x14
-#define MECR	0x18
-
-mdcas0:		.long	0xc71c703f
-mdcas1:		.long	0xffc71c71
-mdcas2:		.long	0xffffffff
-/* mdcnfg:		.long   0x0bb2bcbf */
-mdcnfg:		.long	0x0334b22f	@ alt
-/* mcs0:		.long   0xfff8fff8 */
-msc0:		.long	0xad8c4888	@ alt
-mecr:		.long	0x00060006
-/* mecr:		.long	0x994a994a	@ alt */
-
-/* setting up the memory */
-
-.globl lowlevel_init
-lowlevel_init:
-	ldr	r0, MEM_BASE
-
-	/* Setup the flash memory */
-	ldr	r1, msc0
-	str	r1, [r0, #MSC0]
-
-	/* Set up the DRAM */
-
-	/* MDCAS0 */
-	ldr	r1, mdcas0
-	str	r1, [r0, #MDCAS0]
-
-	/* MDCAS1 */
-	ldr	r1, mdcas1
-	str	r1, [r0, #MDCAS1]
-
-	/* MDCAS2 */
-	ldr	r1, mdcas2
-	str	r1, [r0, #MDCAS2]
-
-	/* MDCNFG */
-	ldr	r1, mdcnfg
-	str	r1, [r0, #MDCNFG]
-
-	/* Set up PCMCIA space */
-	ldr	r1, mecr
-	str	r1, [r0, #MECR]
-
-	/* Load something to activate bank */
-	ldr	r1, MEM_START
-
-.rept	8
-	ldr	r0, [r1]
-.endr
-
-	/* everything is fine now */
-	mov	pc, lr