PowerPC: Drop linkstation_HGLAN support

With changes to the rtl8169 ethernet to improve cache support, we have
needed additional cache functions for mpc8245.  As the board maintainer
has been unresponsive, remove this board.

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Tom Rini <trini@ti.com>

1 files changed, 0 insertions, 124 deletions

diff --git a/board/linkstation/linkstation.c b/board/linkstation/linkstation.c
deleted file mode 100644
index 75cda8681f..0000000000
--- a/board/linkstation/linkstation.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * linkstation.c
- *
- * Misc LinkStation specific functions
- *
- * Copyright (C) 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <version.h>
-#include <mpc824x.h>
-#include <asm/io.h>
-#include <ns16550.h>
-#include <netdev.h>
-
-#ifdef CONFIG_PCI
-#include <pci.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void init_AVR_DUART(void);
-
-int checkboard (void)
-{
-	char *p;
-	bd_t *bd = gd->bd;
-
-	init_AVR_DUART();
-
-	if ((p = getenv ("console_nr")) != NULL) {
-		unsigned long con_nr = simple_strtoul (p, NULL, 10) & 3;
-
-		bd->bi_baudrate &= ~3;
-		bd->bi_baudrate |= con_nr & 3;
-	}
-	return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
-	return (get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE));
-}
-
-/*
- * Initialize PCI Devices
- */
-#ifdef CONFIG_PCI
-
-#ifndef CONFIG_PCI_PNP
-
-static struct pci_config_table pci_linkstation_config_table[] = {
-	/* vendor, device, class */
-	/* bus, dev, func */
-	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	  PCI_ANY_ID, 0x0b, 0,		/* AN983B or RTL8110S  */
-								/* ethernet controller */
-	  pci_cfgfunc_config_device, { PCI_ETH_IOADDR,
-				       PCI_ETH_MEMADDR,
-				       PCI_COMMAND_IO |
-				       PCI_COMMAND_MEMORY |
-				       PCI_COMMAND_MASTER }},
-	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	  PCI_ANY_ID, 0x0c, 0,		/* SII680 or IT8211AF */
-								/* ide controller     */
-	  pci_cfgfunc_config_device, { PCI_IDE_IOADDR,
-				       PCI_IDE_MEMADDR,
-				       PCI_COMMAND_IO |
-				       PCI_COMMAND_MEMORY |
-				       PCI_COMMAND_MASTER }},
-	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	  PCI_ANY_ID, 0x0e, 0,		/* D720101 USB controller, 1st USB 1.1 */
-	  pci_cfgfunc_config_device, { PCI_USB0_IOADDR,
-				       PCI_USB0_MEMADDR,
-				       PCI_COMMAND_MEMORY |
-				       PCI_COMMAND_MASTER }},
-	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	  PCI_ANY_ID, 0x0e, 1,		/* D720101 USB controller, 2nd USB 1.1 */
-	  pci_cfgfunc_config_device, { PCI_USB1_IOADDR,
-				       PCI_USB1_MEMADDR,
-				       PCI_COMMAND_MEMORY |
-				       PCI_COMMAND_MASTER }},
-	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	  PCI_ANY_ID, 0x0e, 2,		/* D720101 USB controller, USB 2.0 */
-	  pci_cfgfunc_config_device, { PCI_USB2_IOADDR,
-				       PCI_USB2_MEMADDR,
-				       PCI_COMMAND_MEMORY |
-				       PCI_COMMAND_MASTER }},
-	{ }
-};
-#endif
-
-struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
-	config_table:pci_linkstation_config_table,
-#endif
-};
-
-void pci_init_board (void)
-{
-	pci_mpc824x_init (&hose);
-
-	/* Reset USB 1.1 */
-	/* Haven't seen any change without these on a HG, maybe it is
-	 * needed on other models */
-	out_le32((volatile unsigned*)(PCI_USB0_MEMADDR + 8), 1);
-	out_le32((volatile unsigned*)(PCI_USB1_MEMADDR + 8), 1);
-}
-#endif /* CONFIG_PCI */
-
-#define UART_DCR       0x80004511
-int board_early_init_f (void)
-{
-	/* set DUART mode */
-	out_8((volatile u8*)UART_DCR, 1);
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	return pci_eth_init(bis);
-}