diff options
| author | Adam Ford <aford173@gmail.com> | 2019-10-08 08:01:12 -0500 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2019-10-08 16:36:37 +0200 |
| commit | 9fb50c68daa696056c7842989e5f7fae1d326b34 (patch) | |
| tree | 42df2a1658e416dc8c2ed0c67725bd2fc5dd1115 /board/logicpd/imx6 | |
| parent | 63ce94b16b3527bc6944d1ab8b2572c6f39e0aef (diff) | |
ARM: imx6q_logic: Fix MMC2 booting
With the reverting of a previous change to spl_boot_device,
this board needs a new solution to determining if we're booting
from MMC1 or MMC2.
This patch creates board_boot_order function which overrides the
standard, and returns not only MMC1, or MMC2, but also can fall
back to NAND or the serial downloader should other boot options
fail.
Signed-off-by: Adam Ford <aford173@gmail.com>
Diffstat (limited to 'board/logicpd/imx6')
| -rw-r--r-- | board/logicpd/imx6/imx6logic.c | 29 |
1 files changed, 29 insertions, 0 deletions
diff --git a/board/logicpd/imx6/imx6logic.c b/board/logicpd/imx6/imx6logic.c index 7fb6dc42c6..4bacd8660a 100644 --- a/board/logicpd/imx6/imx6logic.c +++ b/board/logicpd/imx6/imx6logic.c @@ -207,6 +207,35 @@ struct fsl_esdhc_cfg usdhc_cfg[] = { {USDHC2_BASE_ADDR} /* Baseboard */ }; +void board_boot_order(u32 *spl_boot_list) +{ + struct src *psrc = (struct src *)SRC_BASE_ADDR; + unsigned int reg = readl(&psrc->sbmr1) >> 11; + /* + * Upon reading BOOT_CFG register the following map is done: + * Bit 11 and 12 of BOOT_CFG register can determine the current + * mmc port + * 0x1 SD1-SOM + * 0x2 SD2-Baseboard + */ + + reg &= 0x3; /* Only care about bottom 2 bits */ + switch (reg) { + case 0: + spl_boot_list[0] = BOOT_DEVICE_MMC1; + break; + case 1: + spl_boot_list[0] = BOOT_DEVICE_MMC2; + break; + } + + /* If we cannot find a valid MMC/SD card, try NAND */ + spl_boot_list[1] = BOOT_DEVICE_NAND; + + /* As a last resort, use serial downloader */ + spl_boot_list[2] = BOOT_DEVICE_BOARD; +} + int board_mmc_init(bd_t *bis) { struct src *psrc = (struct src *)SRC_BASE_ADDR; |