diff options
| author | Anatolij Gustschin <agust@denx.de> | 2020-01-07 16:37:42 +0100 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2020-01-14 22:15:21 +0100 |
| commit | 7b5b9343139f934f1ce876e9466c065f20c8265c (patch) | |
| tree | 4c6636057130713042fb73191aebf4ce5104a07e /board/menlo/m53menlo/imximage.cfg | |
| parent | 88366b96ee0d8640b2af53e4026dbaeed0fab5e0 (diff) | |
imx: add imx8x capricorn giedi board
Add support for i.MX8X based Capricorn Giedi SoM.
Supported interfaces: GPIO, ENET, eMMC, I2C, UART.
Console output:
U-Boot SPL 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100)
Trying to boot from MMC1
Load image from MMC/SD 0x3e400
U-Boot 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) ##v01.07
CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C
Model: Siemens Giedi
Board: Capricorn
Boot: MMC0
DRAM: 1022 MiB
MMC: FSL_SDHC: 0
Loading Environment from MMC... OK
In: serial@5a080000
Out: serial@5a080000
Err: serial@5a080000
Net: eth1: ethernet@5b050000 [PRIME]
Autobooting in 1 seconds, press "<Esc><Esc>" to stop
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Diffstat (limited to 'board/menlo/m53menlo/imximage.cfg')
0 files changed, 0 insertions, 0 deletions