FSL: Move board/mpc8266ads under board/freescale

Signed-off-by: Jon Loeliger <jdl@freescale.com>

4 files changed, 0 insertions, 1177 deletions

diff --git a/board/mpc8266ads/Makefile b/board/mpc8266ads/Makefile
deleted file mode 100644
index 291a1c9566..0000000000
--- a/board/mpc8266ads/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o flash.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/mpc8266ads/config.mk b/board/mpc8266ads/config.mk
deleted file mode 100644
index ecc2a7db61..0000000000
--- a/board/mpc8266ads/config.mk
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Modified by, Stuart Hughes, Lineo Inc, stuarth@lineo.com
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# mpc8260ads board
-#
-
-TEXT_BASE = 0xfe000000
-
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
diff --git a/board/mpc8266ads/flash.c b/board/mpc8266ads/flash.c
deleted file mode 100644
index 9512c72a0b..0000000000
--- a/board/mpc8266ads/flash.c
+++ /dev/null
@@ -1,509 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
- * Add support the Sharp chips on the mpc8260ads.
- * I started with board/ip860/flash.c and made changes I found in
- * the MTD project by David Schleef.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
-# endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
-# endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
-# endif
-#endif
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static int clear_block_lock_bit(vu_long * addr);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-#ifndef CONFIG_MPC8266ADS
-	volatile immap_t	*immap  = (immap_t *)CFG_IMMR;
-	volatile memctl8xx_t	*memctl = &immap->im_memctl;
-	volatile ip860_bcsr_t	*bcsr   = (ip860_bcsr_t *)BCSR_BASE;
-#endif
-	unsigned long size;
-	int i;
-
-	/* Init: enable write,
-	 * or we cannot even write flash commands
-	 */
-#ifndef CONFIG_MPC8266ADS
-	bcsr->bd_ctrl |= BD_CTRL_FLWE;
-#endif
-
-
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-
-		/* set the default sector offset */
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	size = flash_get_size((vu_long *)FLASH_BASE, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size, size<<20);
-	}
-
-#ifndef CONFIG_MPC8266ADS
-	/* Remap FLASH according to real size */
-	memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000);
-	memctl->memc_br1 = (CFG_FLASH_BASE & BR_BA_MSK) |
-				(memctl->memc_br1 & ~(BR_BA_MSK));
-#endif
-	/* Re-do sizing to get full correct info */
-	size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
-
-	flash_info[0].size = size;
-
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
-		      &flash_info[0]);
-#endif
-
-#ifdef	CFG_ENV_IS_IN_FLASH
-	/* ENV protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
-		      &flash_info[0]);
-#endif
-	return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_INTEL:	printf ("Intel ");		break;
-	case FLASH_MAN_SHARP:   printf ("Sharp ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F016SV:	printf ("28F016SV (16 Mbit, 32 x 64k)\n");
-				break;
-	case FLASH_28F160S3:	printf ("28F160S3 (16 Mbit, 32 x 512K)\n");
-				break;
-	case FLASH_28F320S3:	printf ("28F320S3 (32 Mbit, 64 x 512K)\n");
-				break;
-	case FLASH_LH28F016SCT: printf ("28F016SC (16 Mbit, 32 x 64K)\n");
-				break;
-	default:		printf ("Unknown Chip Type\n");
-				break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
-	}
-	printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
-	short i;
-	ulong value;
-	ulong base = (ulong)addr;
-	ulong sector_offset;
-
-	/* Write "Intelligent Identifier" command: read Manufacturer ID */
-	*addr = 0x90909090;
-
-	value = addr[0] & 0x00FF00FF;
-	switch (value) {
-	case MT_MANUFACT:	/* SHARP, MT or => Intel */
-	case INTEL_ALT_MANU:
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-	default:
-		printf("unknown manufacturer: %x\n", (unsigned int)value);
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* no or unknown flash	*/
-	}
-
-	value = addr[1];			/* device ID		*/
-
-	switch (value) {
-	case (INTEL_ID_28F016S):
-		info->flash_id += FLASH_28F016SV;
-		info->sector_count = 32;
-		info->size = 0x00400000;
-		sector_offset = 0x20000;
-		break;				/* => 2x2 MB		*/
-
-	case (INTEL_ID_28F160S3):
-		info->flash_id += FLASH_28F160S3;
-		info->sector_count = 32;
-		info->size = 0x00400000;
-		sector_offset = 0x20000;
-		break;				/* => 2x2 MB		*/
-
-	case (INTEL_ID_28F320S3):
-		info->flash_id += FLASH_28F320S3;
-		info->sector_count = 64;
-		info->size = 0x00800000;
-		sector_offset = 0x20000;
-		break;				/* => 2x4 MB		*/
-
-	case SHARP_ID_28F016SCL:
-	case SHARP_ID_28F016SCZ:
-		info->flash_id      = FLASH_MAN_SHARP | FLASH_LH28F016SCT;
-		info->sector_count  = 32;
-		info->size          = 0x00800000;
-		sector_offset = 0x40000;
-		break;				/* => 4x2 MB		*/
-
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);			/* => no or unknown flash */
-
-	}
-
-	/* set up sector start address table */
-	for (i = 0; i < info->sector_count; i++) {
-		info->start[i] = base;
-		base += sector_offset;
-		/* don't know how to check sector protection */
-		info->protect[i] = 0;
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		addr = (vu_long *)info->start[0];
-
-		*addr = 0xFFFFFF;	/* reset bank to read array mode */
-	}
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	int flag, prot, sect;
-	ulong start, now, last;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if (    ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL)
-	     && ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_SHARP) ) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	/* Make Sure Block Lock Bit is not set. */
-	if(clear_block_lock_bit((vu_long *)(info->start[s_first]))){
-		return 1;
-	}
-
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			vu_long *addr = (vu_long *)(info->start[sect]);
-
-			last = start = get_timer (0);
-
-			/* Disable interrupts which might cause a timeout here */
-			flag = disable_interrupts();
-
-			/* Reset Array */
-			*addr = 0xffffffff;
-			/* Clear Status Register */
-			*addr = 0x50505050;
-			/* Single Block Erase Command */
-			*addr = 0x20202020;
-			/* Confirm */
-			*addr = 0xD0D0D0D0;
-
-			if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) {
-			    /* Resume Command, as per errata update */
-			    *addr = 0xD0D0D0D0;
-			}
-
-			/* re-enable interrupts if necessary */
-			if (flag)
-				enable_interrupts();
-
-			/* wait at least 80us - let's wait 1 ms */
-			udelay (1000);
-			while ((*addr & 0x80808080) != 0x80808080) {
-				if(*addr & 0x20202020){
-					printf("Error in Block Erase - Lock Bit may be set!\n");
-					printf("Status Register = 0x%X\n", (uint)*addr);
-					*addr = 0xFFFFFFFF;	/* reset bank */
-					return 1;
-				}
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
-					printf ("Timeout\n");
-					*addr = 0xFFFFFFFF;	/* reset bank */
-					return 1;
-				}
-				/* show that we're waiting */
-				if ((now - last) > 1000) {	/* every second */
-					putc ('.');
-					last = now;
-				}
-			}
-
-			/* reset to read mode */
-			*addr = 0xFFFFFFFF;
-		}
-	}
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-		for (; i<4 && cnt>0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i=0; i<4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i<4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
-	}
-
-	return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-	vu_long *addr = (vu_long *)dest;
-	ulong start, csr;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data) {
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	/* Write Command */
-	*addr = 0x10101010;
-
-	/* Write Data */
-	*addr = data;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* data polling for D7 */
-	start = get_timer (0);
-	flag  = 0;
-	while (((csr = *addr) & 0x80808080) != 0x80808080) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
-			flag = 1;
-			break;
-		}
-	}
-	if (csr & 0x40404040) {
-		printf ("CSR indicates write error (%08lx) at %08lx\n", csr, (ulong)addr);
-		flag = 1;
-	}
-
-	/* Clear Status Registers Command */
-	*addr = 0x50505050;
-	/* Reset to read array mode */
-	*addr = 0xFFFFFFFF;
-
-	return (flag);
-}
-
-/*-----------------------------------------------------------------------
- * Clear Block Lock Bit, returns:
- * 0 - OK
- * 1 - Timeout
- */
-
-static int clear_block_lock_bit(vu_long  * addr)
-{
-	ulong start, now;
-
-	/* Reset Array */
-	*addr = 0xffffffff;
-	/* Clear Status Register */
-	*addr = 0x50505050;
-
-	*addr = 0x60606060;
-	*addr = 0xd0d0d0d0;
-
-	start = get_timer (0);
-	while(*addr != 0x80808080){
-		if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
-			printf ("Timeout on clearing Block Lock Bit\n");
-			*addr = 0xFFFFFFFF;	/* reset bank */
-			return 1;
-		}
-	}
-	return 0;
-}
diff --git a/board/mpc8266ads/mpc8266ads.c b/board/mpc8266ads/mpc8266ads.c
deleted file mode 100644
index 8f7273c41d..0000000000
--- a/board/mpc8266ads/mpc8266ads.c
+++ /dev/null
@@ -1,586 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Modified during 2001 by
- * Advanced Communications Technologies (Australia) Pty. Ltd.
- * Howard Walker, Tuong Vu-Dinh
- *
- * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
- * Added support for the 16M dram simm on the 8260ads boards
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <i2c.h>
-#include <mpc8260.h>
-#include <pci.h>
-
-/*
- * PBI Page Based Interleaving
- *   PSDMR_PBI page based interleaving
- *   0         bank based interleaving
- * External Address Multiplexing (EAMUX) adds a clock to address cycles
- *   (this can help with marginal board layouts)
- *   PSDMR_EAMUX  adds a clock
- *   0            no extra clock
- * Buffer Command (BUFCMD) adds a clock to command cycles.
- *   PSDMR_BUFCMD adds a clock
- *   0            no extra clock
- */
-#define CONFIG_PBI		0
-#define PESSIMISTIC_SDRAM	0
-#define EAMUX			0	/* EST requires EAMUX */
-#define BUFCMD			0
-
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A configuration */
-    {	/*	      conf ppar psor pdir podr pdat */
-	/* PA31 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxENB */
-	/* PA30 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 TxClav   */
-	/* PA29 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxSOC  */
-	/* PA28 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 RxENB */
-	/* PA27 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxSOC */
-	/* PA26 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxClav */
-	/* PA25 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[0] */
-	/* PA24 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[1] */
-	/* PA23 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[2] */
-	/* PA22 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[3] */
-	/* PA21 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[4] */
-	/* PA20 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[5] */
-	/* PA19 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[6] */
-	/* PA18 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[7] */
-	/* PA17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[7] */
-	/* PA16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[6] */
-	/* PA15 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[5] */
-	/* PA14 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[4] */
-	/* PA13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[3] */
-	/* PA12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[2] */
-	/* PA11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[1] */
-	/* PA10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[0] */
-	/* PA9  */ {   0,   1,   1,   1,   0,   0   }, /* FCC1 L1TXD */
-	/* PA8  */ {   0,   1,   1,   0,   0,   0   }, /* FCC1 L1RXD */
-	/* PA7  */ {   0,   0,   0,   1,   0,   0   }, /* PA7 */
-	/* PA6  */ {   1,   1,   1,   1,   0,   0   }, /* TDM A1 L1RSYNC */
-	/* PA5  */ {   0,   0,   0,   1,   0,   0   }, /* PA5 */
-	/* PA4  */ {   0,   0,   0,   1,   0,   0   }, /* PA4 */
-	/* PA3  */ {   0,   0,   0,   1,   0,   0   }, /* PA3 */
-	/* PA2  */ {   0,   0,   0,   1,   0,   0   }, /* PA2 */
-	/* PA1  */ {   1,   0,   0,   0,   0,   0   }, /* FREERUN */
-	/* PA0  */ {   0,   0,   0,   1,   0,   0   }  /* PA0 */
-    },
-
-    /* Port B configuration */
-    {   /*	      conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
-	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
-	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
-	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
-	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
-	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
-	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
-	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
-	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
-	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
-	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
-	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
-	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
-	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
-	/* PB17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_DIV */
-	/* PB16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_ERR */
-	/* PB15 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_ERR */
-	/* PB14 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_EN */
-	/* PB13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:COL */
-	/* PB12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:CRS */
-	/* PB11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB9  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB8  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB7  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB6  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB5  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB4  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    },
-
-    /* Port C */
-    {   /*	      conf ppar psor pdir podr pdat */
-	/* PC31 */ {   0,   0,   0,   1,   0,   0   }, /* PC31 */
-	/* PC30 */ {   0,   0,   0,   1,   0,   0   }, /* PC30 */
-	/* PC29 */ {   0,   1,   1,   0,   0,   0   }, /* SCC1 EN *CLSN */
-	/* PC28 */ {   0,   0,   0,   1,   0,   0   }, /* PC28 */
-	/* PC27 */ {   0,   0,   0,   1,   0,   0   }, /* UART Clock in */
-	/* PC26 */ {   0,   0,   0,   1,   0,   0   }, /* PC26 */
-	/* PC25 */ {   0,   0,   0,   1,   0,   0   }, /* PC25 */
-	/* PC24 */ {   0,   0,   0,   1,   0,   0   }, /* PC24 */
-	/* PC23 */ {   0,   1,   0,   1,   0,   0   }, /* ATMTFCLK */
-	/* PC22 */ {   0,   1,   0,   0,   0,   0   }, /* ATMRFCLK */
-	/* PC21 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN RXCLK */
-	/* PC20 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN TXCLK */
-	/* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK CLK13 */
-	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK14) */
-	/* PC17 */ {   0,   0,   0,   1,   0,   0   }, /* PC17 */
-	/* PC16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK16) */
-	/* PC15 */ {   0,   0,   0,   1,   0,   0   }, /* PC15 */
-	/* PC14 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN *CD */
-	/* PC13 */ {   0,   0,   0,   1,   0,   0   }, /* PC13 */
-	/* PC12 */ {   0,   1,   0,   1,   0,   0   }, /* PC12 */
-	/* PC11 */ {   0,   0,   0,   1,   0,   0   }, /* LXT971 transmit control */
-	/* PC10 */ {   1,   0,   0,   1,   0,   0   }, /* LXT970 FETHMDC */
-	/* PC9  */ {   1,   0,   0,   0,   0,   0   }, /* LXT970 FETHMDIO */
-	/* PC8  */ {   0,   0,   0,   1,   0,   0   }, /* PC8 */
-	/* PC7  */ {   0,   0,   0,   1,   0,   0   }, /* PC7 */
-	/* PC6  */ {   0,   0,   0,   1,   0,   0   }, /* PC6 */
-	/* PC5  */ {   0,   0,   0,   1,   0,   0   }, /* PC5 */
-	/* PC4  */ {   0,   0,   0,   1,   0,   0   }, /* PC4 */
-	/* PC3  */ {   0,   0,   0,   1,   0,   0   }, /* PC3 */
-	/* PC2  */ {   0,   0,   0,   1,   0,   1   }, /* ENET FDE */
-	/* PC1  */ {   0,   0,   0,   1,   0,   0   }, /* ENET DSQE */
-	/* PC0  */ {   0,   0,   0,   1,   0,   0   }, /* ENET LBK */
-    },
-
-    /* Port D */
-    {   /*	      conf ppar psor pdir podr pdat */
-	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD */
-	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD */
-	/* PD29 */ {   0,   1,   0,   1,   0,   0   }, /* SCC1 EN TENA */
-	/* PD28 */ {   0,   1,   0,   0,   0,   0   }, /* PD28 */
-	/* PD27 */ {   0,   1,   1,   1,   0,   0   }, /* PD27 */
-	/* PD26 */ {   0,   0,   0,   1,   0,   0   }, /* PD26 */
-	/* PD25 */ {   0,   0,   0,   1,   0,   0   }, /* PD25 */
-	/* PD24 */ {   0,   0,   0,   1,   0,   0   }, /* PD24 */
-	/* PD23 */ {   0,   0,   0,   1,   0,   0   }, /* PD23 */
-	/* PD22 */ {   0,   0,   0,   1,   0,   0   }, /* PD22 */
-	/* PD21 */ {   0,   0,   0,   1,   0,   0   }, /* PD21 */
-	/* PD20 */ {   0,   0,   0,   1,   0,   0   }, /* PD20 */
-	/* PD19 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
-	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD18 */
-	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
-	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
-	/* PD15 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SCL */
-	/* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
-	/* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
-	/* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
-	/* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
-	/* PD9  */ {   1,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
-	/* PD8  */ {   1,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
-	/* PD7  */ {   0,   0,   0,   1,   0,   1   }, /* PD7 */
-	/* PD6  */ {   0,   0,   0,   1,   0,   1   }, /* PD6 */
-	/* PD5  */ {   0,   0,   0,   1,   0,   1   }, /* PD5 */
-	/* PD4  */ {   0,   0,   0,   1,   0,   1   }, /* PD4 */
-	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    }
-};
-
-typedef struct bscr_ {
-	unsigned long bcsr0;
-	unsigned long bcsr1;
-	unsigned long bcsr2;
-	unsigned long bcsr3;
-	unsigned long bcsr4;
-	unsigned long bcsr5;
-	unsigned long bcsr6;
-	unsigned long bcsr7;
-} bcsr_t;
-
-typedef struct pci_ic_s {
-	unsigned long pci_int_stat;
-	unsigned long pci_int_mask;
-} pci_ic_t;
-
-void reset_phy(void)
-{
-    volatile bcsr_t  *bcsr           = (bcsr_t *)CFG_BCSR;
-
-    /* reset the FEC port */
-    bcsr->bcsr1                    &= ~FETH_RST;
-    bcsr->bcsr1                    |= FETH_RST;
-}
-
-
-int board_early_init_f (void)
-{
-    volatile bcsr_t  *bcsr         = (bcsr_t *)CFG_BCSR;
-    volatile pci_ic_t *pci_ic      = (pci_ic_t *) CFG_PCI_INT;
-
-    bcsr->bcsr1                    = ~FETHIEN & ~RS232EN_1 & ~RS232EN_2;
-
-    /* mask all PCI interrupts */
-    pci_ic->pci_int_mask |= 0xfff00000;
-
-    return 0;
-}
-
-int checkboard(void)
-{
-    puts ("Board: Motorola MPC8266ADS\n");
-    return 0;
-}
-
-long int initdram(int board_type)
-{
-	/* Autoinit part stolen from board/sacsng/sacsng.c */
-    volatile immap_t *immap         = (immap_t *)CFG_IMMR;
-    volatile memctl8260_t *memctl   = &immap->im_memctl;
-    volatile uchar c = 0xff;
-    volatile uchar *ramaddr = (uchar *)(CFG_SDRAM_BASE + 0x8);
-    uint  psdmr = CFG_PSDMR;
-    int i;
-
-    uint   psrt = 0x21;					/* for no SPD */
-    uint   chipselects = 1;				/* for no SPD */
-    uint   sdram_size = CFG_SDRAM_SIZE * 1024 * 1024;	/* for no SPD */
-    uint   or = CFG_OR2_PRELIM;				/* for no SPD */
-    uint   data_width;
-    uint   rows;
-    uint   banks;
-    uint   cols;
-    uint   caslatency;
-    uint   width;
-    uint   rowst;
-    uint   sdam;
-    uint   bsma;
-    uint   sda10;
-    u_char spd_size;
-    u_char data;
-    u_char cksum;
-    int    j;
-
-    /* Keep the compiler from complaining about potentially uninitialized vars */
-    data_width = rows = banks = cols = caslatency = 0;
-
-    /*
-     * Read the SDRAM SPD EEPROM via I2C.
-     */
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
-
-    i2c_read(SDRAM_SPD_ADDR, 0, 1, &data, 1);
-    spd_size = data;
-    cksum    = data;
-    for(j = 1; j < 64; j++)
-	{	/* read only the checksummed bytes */
-	/* note: the I2C address autoincrements when alen == 0 */
-		i2c_read(SDRAM_SPD_ADDR, 0, 0, &data, 1);
-		/*printf("addr %d = 0x%02x\n", j, data);*/
-		if(j ==  5) chipselects = data & 0x0F;
-		else if(j ==  6) data_width  = data;
-		else if(j ==  7) data_width |= data << 8;
-		else if(j ==  3) rows        = data & 0x0F;
-		else if(j ==  4) cols        = data & 0x0F;
-		else if(j == 12)
-		{
-			/*
-				 * Refresh rate: this assumes the prescaler is set to
-			 * approximately 0.39uSec per tick and the target refresh period
-			 * is about 85% of maximum.
-			 */
-			switch(data & 0x7F)
-			{
-					default:
-					case 0:  psrt = 0x21; /*  15.625uS */  break;
-					case 1:  psrt = 0x07; /*   3.9uS   */  break;
-					case 2:  psrt = 0x0F; /*   7.8uS   */  break;
-					case 3:  psrt = 0x43; /*  31.3uS   */  break;
-					case 4:  psrt = 0x87; /*  62.5uS   */  break;
-					case 5:  psrt = 0xFF; /* 125uS     */  break;
-			}
-		}
-		else if(j == 17) banks       = data;
-		else if(j == 18)
-		{
-			caslatency = 3; /* default CL */
-#		    if(PESSIMISTIC_SDRAM)
-				if((data & 0x04) != 0) caslatency = 3;
-				else if((data & 0x02) != 0) caslatency = 2;
-				else if((data & 0x01) != 0) caslatency = 1;
-#			else
-				if((data & 0x01) != 0) caslatency = 1;
-				else if((data & 0x02) != 0) caslatency = 2;
-				else if((data & 0x04) != 0) caslatency = 3;
-#			endif
-			else
-			{
-			printf ("WARNING: Unknown CAS latency 0x%02X, using 3\n",
-					data);
-			}
-		}
-		else if(j == 63)
-		{
-			if(data != cksum)
-			{
-				printf ("WARNING: Configuration data checksum failure:"
-					" is 0x%02x, calculated 0x%02x\n",
-				data, cksum);
-			}
-		}
-		cksum += data;
-    }
-
-    /* We don't trust CL less than 2 (only saw it on an old 16MByte DIMM) */
-    if(caslatency < 2) {
-		printf("CL was %d, forcing to 2\n", caslatency);
-		caslatency = 2;
-    }
-    if(rows > 14) {
-		printf("This doesn't look good, rows = %d, should be <= 14\n", rows);
-		rows = 14;
-    }
-    if(cols > 11) {
-		printf("This doesn't look good, columns = %d, should be <= 11\n", cols);
-		cols = 11;
-    }
-
-    if((data_width != 64) && (data_width != 72))
-    {
-		printf("WARNING: SDRAM width unsupported, is %d, expected 64 or 72.\n",
-			data_width);
-    }
-    width = 3;		/* 2^3 = 8 bytes = 64 bits wide */
-    /*
-     * Convert banks into log2(banks)
-     */
-    if     (banks == 2)	banks = 1;
-    else if(banks == 4)	banks = 2;
-    else if(banks == 8)	banks = 3;
-
-
-    sdram_size = 1 << (rows + cols + banks + width);
-    /* hack for high density memory (512MB per CS) */
-    /* !!!!! Will ONLY work with Page Based Interleave !!!!!
-	     ( PSDMR[PBI] = 1 )
-    */
-    /* mamory actually has 11 column addresses, but the memory controller
-       doesn't really care.
-       the calculations that follow will however move the rows so that
-       they are muxed one bit off if you use 11 bit columns.
-       The solution is to tell the memory controller the correct size of the memory
-       but change the number of columns to 10 afterwards.
-       The 11th column addre will still be mucxed correctly onto the bus.
-
-       Also be aware that the MPC8266ADS board Rev B has not connected
-       Row addres 13 to anything.
-
-       The fix is to connect ADD16 (from U37-47) to SADDR12 (U28-126)
-    */
-    if (cols > 10)
-	    cols = 10;
-
-#if(CONFIG_PBI == 0)	/* bank-based interleaving */
-    rowst = ((32 - 6) - (rows + cols + width)) * 2;
-#else
-    rowst = 32 - (rows + banks + cols + width);
-#endif
-
-   or = ~(sdram_size - 1)    |	/* SDAM address mask	*/
-	  ((banks-1) << 13)   |	/* banks per device	*/
-	  (rowst << 9)        |	/* rowst		*/
-	  ((rows - 9) << 6);	/* numr			*/
-
-
-    /*printf("memctl->memc_or2 = 0x%08x\n", or);*/
-
-    /*
-     * SDAM specifies the number of columns that are multiplexed
-     * (reference AN2165/D), defined to be (columns - 6) for page
-     * interleave, (columns - 8) for bank interleave.
-     *
-     * BSMA is 14 - max(rows, cols).  The bank select lines come
-     * into play above the highest "address" line going into the
-     * the SDRAM.
-     */
-#if(CONFIG_PBI == 0)	/* bank-based interleaving */
-    sdam = cols - 8;
-    bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
-    sda10 = sdam + 2;
-#else
-    sdam = cols + banks - 8;
-    bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
-    sda10 = sdam;
-#endif
-#if(PESSIMISTIC_SDRAM)
-    psdmr = (CONFIG_PBI              |\
-	     PSDMR_RFEN              |\
-	     PSDMR_RFRC_16_CLK       |\
-	     PSDMR_PRETOACT_8W       |\
-	     PSDMR_ACTTORW_8W        |\
-	     PSDMR_WRC_4C            |\
-	     PSDMR_EAMUX             |\
-	     PSDMR_BUFCMD)           |\
-	     caslatency              |\
-	     ((caslatency - 1) << 6) |	/* LDOTOPRE is CL - 1 */ \
-	     (sdam << 24)            |\
-	     (bsma << 21)            |\
-	     (sda10 << 18);
-#else
-    psdmr = (CONFIG_PBI              |\
-	     PSDMR_RFEN              |\
-	     PSDMR_RFRC_7_CLK        |\
-	     PSDMR_PRETOACT_3W       |	/* 1 for 7E parts (fast PC-133) */ \
-	     PSDMR_ACTTORW_2W        |	/* 1 for 7E parts (fast PC-133) */ \
-	     PSDMR_WRC_1C            |	/* 1 clock + 7nSec */
-	     EAMUX                   |\
-	     BUFCMD)                 |\
-	     caslatency              |\
-	     ((caslatency - 1) << 6) |	/* LDOTOPRE is CL - 1 */ \
-	     (sdam << 24)            |\
-	     (bsma << 21)            |\
-	     (sda10 << 18);
-#endif
-	/*printf("psdmr = 0x%08x\n", psdmr);*/
-
-    /*
-     * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
-     *
-     * "At system reset, initialization software must set up the
-     *  programmable parameters in the memory controller banks registers
-     *  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
-     *  system software should execute the following initialization sequence
-     *  for each SDRAM device.
-     *
-     *  1. Issue a PRECHARGE-ALL-BANKS command
-     *  2. Issue eight CBR REFRESH commands
-     *  3. Issue a MODE-SET command to initialize the mode register
-     *
-     * Quote from Micron MT48LC8M16A2 data sheet:
-     *
-     *  "...the SDRAM requires a 100uS delay prior to issuing any
-     *  command other than a COMMAND INHIBIT or NOP.  Starting at some
-     *  point during this 100uS period and continuing at least through
-     *  the end of this period, COMMAND INHIBIT or NOP commands should
-     *  be applied."
-     *
-     *  "Once the 100uS delay has been satisfied with at least one COMMAND
-     *  INHIBIT or NOP command having been applied, a /PRECHARGE command/
-     *  should be applied.  All banks must then be precharged, thereby
-     *  placing the device in the all banks idle state."
-     *
-     *  "Once in the idle state, /two/ AUTO REFRESH cycles must be
-     *  performed.  After the AUTO REFRESH cycles are complete, the
-     *  SDRAM is ready for mode register programming."
-     *
-     *  (/emphasis/ mine, gvb)
-     *
-     *  The way I interpret this, Micron start up sequence is:
-     *  1. Issue a PRECHARGE-BANK command (initial precharge)
-     *  2. Issue a PRECHARGE-ALL-BANKS command ("all banks ... precharged")
-     *  3. Issue two (presumably, doing eight is OK) CBR REFRESH commands
-     *  4. Issue a MODE-SET command to initialize the mode register
-     *
-     *  --------
-     *
-     *  The initial commands are executed by setting P/LSDMR[OP] and
-     *  accessing the SDRAM with a single-byte transaction."
-     *
-     * The appropriate BRx/ORx registers have already been set when we
-     * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
-     */
-
-    memctl->memc_mptpr = CFG_MPTPR;
-    memctl->memc_psrt  = psrt;
-
-    memctl->memc_br2 = CFG_BR2_PRELIM;
-    memctl->memc_or2 = or;
-
-    memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
-    *ramaddr = c;
-
-    memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
-    for (i = 0; i < 8; i++)
-	*ramaddr = c;
-
-    memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
-    *ramaddr = c;
-
-    memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
-    *ramaddr = c;
-
-    /*
-     * Do it a second time for the second set of chips if the DIMM has
-     * two chip selects (double sided).
-     */
-    if(chipselects > 1)
-	{
-	ramaddr += sdram_size;
-
-		memctl->memc_br3 = CFG_BR3_PRELIM + sdram_size;
-		memctl->memc_or3 = or;
-
-		memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
-		*ramaddr = c;
-
-		memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
-		for (i = 0; i < 8; i++)
-			*ramaddr = c;
-
-		memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
-		*ramaddr = c;
-
-		memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
-		*ramaddr = c;
-    }
-
-	/* print info */
-	printf("SDRAM configuration read from SPD\n");
-	printf("\tSize per side = %dMB\n", sdram_size >> 20);
-	printf("\tOrganization: %d sides, %d banks, %d Columns, %d Rows, Data width = %d bits\n", chipselects, 1<<(banks), cols, rows, data_width);
-	printf("\tRefresh rate = %d, CAS latency = %d", psrt, caslatency);
-#if(CONFIG_PBI == 0)	/* bank-based interleaving */
-    printf(", Using Bank Based Interleave\n");
-#else
-    printf(", Using Page Based Interleave\n");
-#endif
-	printf("\tTotal size: ");
-
-    /* this delay only needed for original 16MB DIMM...
-     * Not needed for any other memory configuration */
-    if ((sdram_size * chipselects) == (16 *1024 *1024))
-	udelay (250000);
-    return (sdram_size * chipselects);
-	/*return (16 * 1024 * 1024);*/
-}
-
-
-#ifdef	CONFIG_PCI
-struct pci_controller hose;
-
-extern void pci_mpc8250_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
-	pci_mpc8250_init(&hose);
-}
-#endif