mpc83xx: Add MPC8360EMDS basic board support

Add support for the Freescale MPC8360EMDS board.
Includes DDR, DUART, Local Bus, PCI.

1 files changed, 294 insertions, 0 deletions

diff --git a/board/mpc8360emds/pci.c b/board/mpc8360emds/pci.c
new file mode 100644
index 0000000000..880b2ecc3e
--- /dev/null
+++ b/board/mpc8360emds/pci.c
@@ -0,0 +1,294 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/*
+ * PCI Configuration space access support for MPC83xx PCI Bridge
+ */
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <common.h>
+#include <pci.h>
+#include <i2c.h>
+
+#include <asm/i2c.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_PCI)
+#define PCI_FUNCTION_CONFIG   0x44
+#define PCI_FUNCTION_CFG_LOCK 0x20
+
+/*
+ * Initialize PCI Devices, report devices found
+ */
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_mpc83xxemds_config_table[] = {
+	{
+	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+	 pci_cfgfunc_config_device,
+	 {PCI_ENET0_IOADDR,
+	  PCI_ENET0_MEMADDR,
+	  PCI_COMMON_MEMORY | PCI_COMMAND_MASTER}
+	 },
+	{}
+}
+#endif
+static struct pci_controller hose[] = {
+	{
+#ifndef CONFIG_PCI_PNP
+	      config_table:pci_mpc83xxemds_config_table,
+#endif
+	 },
+};
+
+/**********************************************************************
+ * pci_init_board()
+ *********************************************************************/
+void pci_init_board(void)
+#ifdef CONFIG_PCISLAVE
+{
+	u16 reg16;
+	volatile immap_t *immr;
+	volatile law83xx_t *pci_law;
+	volatile pot83xx_t *pci_pot;
+	volatile pcictrl83xx_t *pci_ctrl;
+	volatile pciconf83xx_t *pci_conf;
+
+	immr = (immap_t *) CFG_IMMRBAR;
+	pci_law = immr->sysconf.pcilaw;
+	pci_pot = immr->ios.pot;
+	pci_ctrl = immr->pci_ctrl;
+	pci_conf = immr->pci_conf;
+	/*
+	 * Configure PCI Inbound Translation Windows
+	 */
+	pci_ctrl[0].pitar0 = 0x0;
+	pci_ctrl[0].pibar0 = 0x0;
+	pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP |
+	    PIWAR_WTT_SNOOP | PIWAR_IWS_4K;
+
+	pci_ctrl[0].pitar1 = 0x0;
+	pci_ctrl[0].pibar1 = 0x0;
+	pci_ctrl[0].piebar1 = 0x0;
+	pci_ctrl[0].piwar1 &= ~PIWAR_EN;
+
+	pci_ctrl[0].pitar2 = 0x0;
+	pci_ctrl[0].pibar2 = 0x0;
+	pci_ctrl[0].piebar2 = 0x0;
+	pci_ctrl[0].piwar2 &= ~PIWAR_EN;
+
+	hose[0].first_busno = 0;
+	hose[0].last_busno = 0xff;
+	pci_setup_indirect(&hose[0],
+			   (CFG_IMMRBAR + 0x8300), (CFG_IMMRBAR + 0x8304));
+	reg16 = 0xff;
+
+	pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
+				  PCI_COMMAND, &reg16);
+	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY;
+	pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
+				   PCI_COMMAND, reg16);
+
+	/*
+	 * Clear non-reserved bits in status register.
+	 */
+	pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
+				   PCI_STATUS, 0xffff);
+	pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0),
+				   PCI_LATENCY_TIMER, 0x80);
+
+	/*
+	 * Unlock configuration lock in PCI function configuration register.
+	 */
+	pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0),
+				  PCI_FUNCTION_CONFIG, &reg16);
+	reg16 &= ~(PCI_FUNCTION_CFG_LOCK);
+	pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0),
+				   PCI_FUNCTION_CONFIG, reg16);
+
+	printf("Enabled PCI 32bit Agent Mode\n");
+}
+#else
+{
+	volatile immap_t *immr;
+	volatile clk83xx_t *clk;
+	volatile law83xx_t *pci_law;
+	volatile pot83xx_t *pci_pot;
+	volatile pcictrl83xx_t *pci_ctrl;
+	volatile pciconf83xx_t *pci_conf;
+
+	u8 val8, orig_i2c_bus;
+	u16 reg16;
+	u32 val32;
+	u32 dev;
+
+	immr = (immap_t *) CFG_IMMRBAR;
+	clk = (clk83xx_t *) & immr->clk;
+	pci_law = immr->sysconf.pcilaw;
+	pci_pot = immr->ios.pot;
+	pci_ctrl = immr->pci_ctrl;
+	pci_conf = immr->pci_conf;
+	/*
+	 * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode
+	 */
+	val32 = clk->occr;
+	udelay(2000);
+#if defined(PCI_66M)
+	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
+	printf("PCI clock is 66MHz\n");
+#elif defined(PCI_33M)
+	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 |
+	    OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR;
+	printf("PCI clock is 33MHz\n");
+#else
+	clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2;
+	printf("PCI clock is 66MHz\n");
+#endif
+	udelay(2000);
+
+	/*
+	 * Configure PCI Local Access Windows
+	 */
+	pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
+
+	pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M;
+
+	/*
+	 * Configure PCI Outbound Translation Windows
+	 */
+
+	/* PCI mem space - prefetch */
+	pci_pot[0].potar = (CFG_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[0].pobar = (CFG_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[0].pocmr =
+	    POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK);
+
+	/* PCI mmio - non-prefetch mem space */
+	pci_pot[1].potar = (CFG_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[1].pobar = (CFG_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK);
+
+	/* PCI IO space */
+	pci_pot[2].potar = (CFG_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
+	pci_pot[2].pobar = (CFG_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
+	pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
+
+	/*
+	 * Configure PCI Inbound Translation Windows
+	 */
+	pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK;
+	pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK;
+	pci_ctrl[0].piebar1 = 0x0;
+	pci_ctrl[0].piwar1 =
+	    PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
+	    PIWAR_IWS_2G;
+
+	/*
+	 * Assign PIB PMC slot to desired PCI bus
+	 */
+
+	mpc83xx_i2c = (i2c_t *) (CFG_IMMRBAR + CFG_I2C2_OFFSET);
+	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+	val8 = 0;
+	i2c_write(0x23, 0x6, 1, &val8, 1);
+	i2c_write(0x23, 0x7, 1, &val8, 1);
+	val8 = 0xff;
+	i2c_write(0x23, 0x2, 1, &val8, 1);
+	i2c_write(0x23, 0x3, 1, &val8, 1);
+
+	val8 = 0;
+	i2c_write(0x26, 0x6, 1, &val8, 1);
+	val8 = 0x34;
+	i2c_write(0x26, 0x7, 1, &val8, 1);
+
+	val8 = 0xf3;		/*PMC1, PMC2, PMC3 slot to PCI bus */
+	i2c_write(0x26, 0x2, 1, &val8, 1);
+	val8 = 0xff;
+	i2c_write(0x26, 0x3, 1, &val8, 1);
+
+	val8 = 0;
+	i2c_write(0x27, 0x6, 1, &val8, 1);
+	i2c_write(0x27, 0x7, 1, &val8, 1);
+	val8 = 0xff;
+	i2c_write(0x27, 0x2, 1, &val8, 1);
+	val8 = 0xef;
+	i2c_write(0x27, 0x3, 1, &val8, 1);
+	asm("eieio");
+
+	/*
+	 * Release PCI RST Output signal
+	 */
+	udelay(2000);
+	pci_ctrl[0].gcr = 1;
+	udelay(2000);
+
+	hose[0].first_busno = 0;
+	hose[0].last_busno = 0xff;
+
+	/* PCI memory prefetch space */
+	pci_set_region(hose[0].regions + 0,
+		       CFG_PCI_MEM_BASE,
+		       CFG_PCI_MEM_PHYS,
+		       CFG_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);
+
+	/* PCI memory space */
+	pci_set_region(hose[0].regions + 1,
+		       CFG_PCI_MMIO_BASE,
+		       CFG_PCI_MMIO_PHYS, CFG_PCI_MMIO_SIZE, PCI_REGION_MEM);
+
+	/* PCI IO space */
+	pci_set_region(hose[0].regions + 2,
+		       CFG_PCI_IO_BASE,
+		       CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO);
+
+	/* System memory space */
+	pci_set_region(hose[0].regions + 3,
+		       CFG_PCI_SLV_MEM_LOCAL,
+		       CFG_PCI_SLV_MEM_BUS,
+		       CFG_PCI_SLV_MEM_SIZE,
+		       PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+	hose[0].region_count = 4;
+
+	pci_setup_indirect(&hose[0],
+			   (CFG_IMMRBAR + 0x8300), (CFG_IMMRBAR + 0x8304));
+
+	pci_register_hose(hose);
+
+	/*
+	 * Write command register
+	 */
+	reg16 = 0xff;
+	dev = PCI_BDF(0, 0, 0);
+	pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, &reg16);
+	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+	pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16);
+
+	/*
+	 * Clear non-reserved bits in status register.
+	 */
+	pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff);
+	pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80);
+	pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08);
+
+	printf("PCI 32bit bus on PMC1 & PMC2 & PMC3\n");
+
+	/*
+	 * Hose scan.
+	 */
+	hose->last_busno = pci_hose_scan(hose);
+}
+#endif				/* CONFIG_PCISLAVE */
+#endif				/* CONFIG_PCI */