* Implement new mechanism to export U-Boot's functions to standalone

  applications: instead of using (PPC-specific) system calls we now
  use a jump table; please see doc/README.standalone for details

* Patch by Dave Westwood, 24 Jul 2003:
  added support for Unity OS (a proprietary OS)

4 files changed, 46 insertions, 16 deletions

diff --git a/board/mpl/common/flash.c b/board/mpl/common/flash.c
index 28f6f0a22b..4bdb8bdc65 100644
--- a/board/mpl/common/flash.c
+++ b/board/mpl/common/flash.c
@@ -105,6 +105,8 @@ unsigned long flash_init (void)
 			CFG_MONITOR_BASE+monitor_flash_len-1,
 			&flash_info[0]);
 #endif
+	/* protect reset vector */
+	flash_info[0].protect[flash_info[0].sector_count-1] = 1;
 	size_b1 = 0 ;
 	flash_info[0].size = size_b0;
 #if 0
diff --git a/board/mpl/common/memtst.c b/board/mpl/common/memtst.c
index c994a8b05f..2c77d375ea 100644
--- a/board/mpl/common/memtst.c
+++ b/board/mpl/common/memtst.c
@@ -494,7 +494,7 @@ void mem_test_reloc(void)
 }
 
 
-int mem_test (unsigned long start, unsigned long ramsize, int quiet, int reloc)
+int mem_test (unsigned long start, unsigned long ramsize, int quiet)
 {
 	unsigned long errors, stage;
 	unsigned long startaddr, size, i;
diff --git a/board/mpl/common/pci_parts.h b/board/mpl/common/pci_parts.h
index 82426f3d03..e5627aa34e 100644
--- a/board/mpl/common/pci_parts.h
+++ b/board/mpl/common/pci_parts.h
@@ -110,7 +110,7 @@ static struct pci_pip405_config_entry piix4_ide_cntrl_f1[] = {
 #if !defined(CONFIG_MIP405T)
 	{PCI_CFG_PIIX4_IDETIM,	0x80008000,	4}, /* enable Both IDE channels	*/
 #else
-	{PCI_CFG_PIIX4_IDETIM,	0x80000000,	4}, /* enable IDE channel0	*/
+	{PCI_CFG_PIIX4_IDETIM,	0x00008000,	4}, /* enable IDE channel0	*/
 #endif
 	{ }					    /* end of device table 	*/
 };
diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c
index 07922bc989..090041b403 100644
--- a/board/mpl/mip405/mip405.c
+++ b/board/mpl/mip405/mip405.c
@@ -69,6 +69,7 @@
 #include <miiphy.h>
 #include "../common/common_util.h"
 #include <i2c.h>
+#include <rtc.h>
 extern block_dev_desc_t * scsi_get_dev(int dev);
 extern block_dev_desc_t * ide_get_dev(int dev);
 
@@ -110,14 +111,14 @@ typedef struct {
 } sdram_t;
 #if defined(CONFIG_MIP405T)
 const sdram_t sdram_table[] = {
-	{ 0x01,	/* MIP405T Rev A, 64MByte -1 Board */
+	{ 0x0F,	/* MIP405T Rev A, 64MByte -1 Board */
 		3,	/* Case Latenty = 3 */
 		3,	/* trp 20ns / 7.5 ns datain[27] */
 		3,	/* trcd 20ns /7.5 ns (datain[29]) */
 		6,	/* tras 44ns /7.5 ns  (datain[30]) */
 		4,	/* tcpt 44 - 20ns = 24ns */
-		3,	/* Address Mode = 3 (13x9x4) */
-		4,	/* size value (64MByte) */
+		2,	/* Address Mode = 2 (12x9x4) */
+		3,	/* size value (32MByte) */
 		0},	/* ECC disabled */
 	{ 0xff, /* terminator */
 	  0xff,
@@ -281,11 +282,6 @@ int init_sdram (void)
 	if((bc & 0x80)==0x80)
 		SDRAM_err ("U-Boot configured for a MIP405 not for a MIP405T!!!\n");
 #endif
-#if !defined(CONFIG_MIP405T)
-	/* since the ECC initialisation needs some time,
-	 * we show that we're alive
-	 */
-	serial_puts ("\nInitializing SDRAM, Please stand by");
 	/* set-up the chipselect machine */
 	mtdcr (ebccfga, pb0cr);		/* get cs0 config reg */
 	tmp = mfdcr (ebccfgd);
@@ -311,7 +307,6 @@ int init_sdram (void)
 	mtdcr (ebccfgd, UART1_AP);
 	mtdcr (ebccfga, pb3cr);
 	mtdcr (ebccfgd, UART1_CR);
-#endif
 	bc = in8 (PLD_BOARD_CFG_REG);
 #ifdef SDRAM_DEBUG
 	serial_puts ("\nstart SDRAM Setup\n");
@@ -333,6 +328,11 @@ int init_sdram (void)
 	write_hex (i);
 	serial_puts (" \n");
 #endif
+	/* since the ECC initialisation needs some time,
+	 * we show that we're alive
+	 */
+	if (sdram_table[i].ecc)
+		serial_puts ("\nInitializing SDRAM, Please stand by");
 	cal_val = sdram_table[i].cal - 1;	/* Cas Latency */
 	trp_clocks = sdram_table[i].trp;	/* 20ns / 7.5 ns datain[27] */
 	trcd_clocks = sdram_table[i].trcd;	/* 20ns /7.5 ns (datain[29]) */
@@ -559,7 +559,7 @@ void get_pcbrev_var(unsigned char *pcbrev, unsigned char *var)
 	unsigned char bc;
 	bc = in8 (PLD_BOARD_CFG_REG);
 	*pcbrev=(bc >> 4) & 0xf;
-	*var=bc & 0xf ;
+	*var=16-(bc & 0xf);
 #endif
 }
 
@@ -654,8 +654,6 @@ long int initdram (int board_type)
 
 /* ------------------------------------------------------------------------- */
 
-extern int mem_test (unsigned long start, unsigned long ramsize,
-					 int quiet);
 
 static int test_dram (unsigned long ramsize)
 {
@@ -666,8 +664,15 @@ static int test_dram (unsigned long ramsize)
 	return (1);
 }
 
+/* used to check if the time in RTC is valid */
+static unsigned long start;
+static struct rtc_time tm;
+
 int misc_init_r (void)
 {
+	/* check, if RTC is running */
+	rtc_get (&tm);
+	start=get_timer(0);
 	/* if MIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */
 	if (mfdcr(strap) & PSR_ROM_LOC)
 	       mtspr(ccr0, (mfspr(ccr0) & ~0x80));
@@ -688,9 +693,13 @@ void print_mip405_rev (void)
 }
 
 extern void mem_test_reloc(void);
+extern int mk_date (char *, struct rtc_time *);
 
 int last_stage_init (void)
 {
+	unsigned long stop;
+	struct rtc_time newtm;
+	unsigned char *s;
 	mem_test_reloc();
 	/* write correct LED configuration */
 	if (miiphy_write (0x1, 0x14, 0x2402) != 0) {
@@ -704,6 +713,25 @@ int last_stage_init (void)
 	print_mip405_rev ();
 	show_stdio_dev ();
 	check_env ();
+	/* check if RTC time is valid */
+	stop=get_timer(start);
+	while(stop<1200) {   /* we wait 1.2 sec to check if the RTC is running */
+		udelay(1000);
+		stop=get_timer(start);
+	}
+	rtc_get (&newtm);
+	if(tm.tm_sec==newtm.tm_sec) {
+		s=getenv("defaultdate");
+		if(!s)
+			mk_date ("010112001970", &newtm);
+		else
+			if(mk_date (s, &newtm)!=0) {
+				printf("RTC: Bad date format in defaultdate\n");
+				return 0;
+			}
+		rtc_reset ();
+		rtc_set(&newtm);
+	}
 	return 0;
 }
 
@@ -745,10 +773,10 @@ void print_mip405_info (void)
 	printf ("SER1 uses handshakes %s\n",
 			(ext & 0x80) ? "DTR/DSR" : "RTS/CTS");
 #else
-	printf ("User Config Switch %d %d %d %d %d %d %d %d %d\n",
+	printf ("User Config Switch %d %d %d %d %d %d %d %d\n",
 			(ext) & 0x1, (ext >> 1) & 0x1, (ext >> 2) & 0x1,
 			(ext >> 3) & 0x1, (ext >> 4) & 0x1, (ext >> 5) & 0x1,
-			(ext >> 6) & 0x1,(ext >> 7) & 0x1,(ext >> 8) & 0x1);
+			(ext >> 6) & 0x1,(ext >> 7) & 0x1);
 #endif
 	printf ("IDE Reset %s\n", (ext & 0x01) ? "asserted" : "not asserted");
 	printf ("IRQs:\n");