Merge branch 'master' of /home/stefan/git/u-boot/u-boot

11 files changed, 73 insertions, 73 deletions

diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index 8454420f10..8990fc6058 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -53,7 +53,7 @@ extern int gunzip(void *, int, uchar *, unsigned long *);
 extern int mem_test(ulong start, ulong ramsize, int quiet);
 
 #define I2C_BACKUP_ADDR 0x7C00		/* 0x200 bytes for backup */
-#define IMAGE_SIZE CFG_MONITOR_LEN	/* ugly, but it works for now */
+#define IMAGE_SIZE CONFIG_SYS_MONITOR_LEN	/* ugly, but it works for now */
 
 extern flash_info_t flash_info[];	/* info for FLASH chips */
 
@@ -270,7 +270,7 @@ mpl_prg_image(uchar *ld_addr)
 #if !defined(CONFIG_PATI)
 void get_backup_values(backup_t *buf)
 {
-	i2c_read(CFG_DEF_EEPROM_ADDR, I2C_BACKUP_ADDR,2,(void *)buf,sizeof(backup_t));
+	i2c_read(CONFIG_SYS_DEF_EEPROM_ADDR, I2C_BACKUP_ADDR,2,(void *)buf,sizeof(backup_t));
 }
 
 void set_backup_values(int overwrite)
@@ -298,7 +298,7 @@ void set_backup_values(int overwrite)
 		return;
 	}
 	back.eth_addr[20]=0;
-	i2c_write(CFG_DEF_EEPROM_ADDR, I2C_BACKUP_ADDR,2,(void *)&back,sizeof(backup_t));
+	i2c_write(CONFIG_SYS_DEF_EEPROM_ADDR, I2C_BACKUP_ADDR,2,(void *)&back,sizeof(backup_t));
 }
 
 void clear_env_values(void)
@@ -308,8 +308,8 @@ void clear_env_values(void)
 
 	memset(&back,0xff,sizeof(backup_t));
 	memset(env_crc,0x00,4);
-	i2c_write(CFG_DEF_EEPROM_ADDR,I2C_BACKUP_ADDR,2,(void *)&back,sizeof(backup_t));
-	i2c_write(CFG_DEF_EEPROM_ADDR,CONFIG_ENV_OFFSET,2,(void *)env_crc,4);
+	i2c_write(CONFIG_SYS_DEF_EEPROM_ADDR,I2C_BACKUP_ADDR,2,(void *)&back,sizeof(backup_t));
+	i2c_write(CONFIG_SYS_DEF_EEPROM_ADDR,CONFIG_ENV_OFFSET,2,(void *)env_crc,4);
 }
 
 /*
@@ -322,7 +322,7 @@ int check_env_old_size(ulong oldsize)
 	uchar buf[64];
 
 	/* read old CRC */
-	eeprom_read (CFG_DEF_EEPROM_ADDR,
+	eeprom_read (CONFIG_SYS_DEF_EEPROM_ADDR,
 		     CONFIG_ENV_OFFSET,
 		     (uchar *)&crc, sizeof(ulong));
 
@@ -333,7 +333,7 @@ int check_env_old_size(ulong oldsize)
 	while (len > 0) {
 		int n = (len > sizeof(buf)) ? sizeof(buf) : len;
 
-		eeprom_read (CFG_DEF_EEPROM_ADDR, CONFIG_ENV_OFFSET+off, buf, n);
+		eeprom_read (CONFIG_SYS_DEF_EEPROM_ADDR, CONFIG_ENV_OFFSET+off, buf, n);
 		new = crc32 (new, buf, n);
 		len -= n;
 		off += n;
@@ -362,7 +362,7 @@ void copy_old_env(ulong size)
 	len=size;
 	off = sizeof(long);
 	while (len > off) {
-		eeprom_read (CFG_DEF_EEPROM_ADDR, CONFIG_ENV_OFFSET+off, &c, 1);
+		eeprom_read (CONFIG_SYS_DEF_EEPROM_ADDR, CONFIG_ENV_OFFSET+off, &c, 1);
 		if(c != '=') {
 			*name++=c;
 			off++;
@@ -371,7 +371,7 @@ void copy_old_env(ulong size)
 			*name++='\0';
 			off++;
 			do {
-				eeprom_read (CFG_DEF_EEPROM_ADDR, CONFIG_ENV_OFFSET+off, &c, 1);
+				eeprom_read (CONFIG_SYS_DEF_EEPROM_ADDR, CONFIG_ENV_OFFSET+off, &c, 1);
 				*value++=c;
 				off++;
 				if(c == '\0')
@@ -485,7 +485,7 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			}
 			else {
 				local_args[1] = NULL;
-				ld_addr=CFG_LOAD_ADDR;
+				ld_addr=CONFIG_SYS_LOAD_ADDR;
 				result=do_fdcboot(cmdtp, 0, 1, local_args);
 			}
 			result=mpl_prg_image((uchar *)ld_addr);
@@ -519,14 +519,14 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			result = (int)simple_strtol(argv[2], NULL, 16);
 	    }
 	    src=(unsigned long)&result;
-	    src-=CFG_MEMTEST_START;
+	    src-=CONFIG_SYS_MEMTEST_START;
 	    src-=(100*1024); /* - 100k */
 	    src&=0xfff00000;
 	    size=0;
 	    do {
 		size++;
 			printf("\n\nPass %ld\n",size);
-			mem_test(CFG_MEMTEST_START,src,1);
+			mem_test(CONFIG_SYS_MEMTEST_START,src,1);
 			if(ctrlc())
 				break;
 			if(result>0)
diff --git a/board/mpl/common/flash.c b/board/mpl/common/flash.c
index b2d4f6f5e5..302d7a3d50 100644
--- a/board/mpl/common/flash.c
+++ b/board/mpl/common/flash.c
@@ -52,7 +52,7 @@
 #include <mpc5xx.h>
 #endif
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 /*-----------------------------------------------------------------------
  * Functions
  */
@@ -89,7 +89,7 @@ void unlock_intel_sectors(flash_info_t *info,ulong addr,ulong cnt);
  * The board_init_r will fill in wrong values in the board init structure,
  * but this will be fixed in the misc_init_r routine:
  * bd->bi_flashstart=0-flash_info[0].size
- * bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN
+ * bd->bi_flashsize=flash_info[0].size-CONFIG_SYS_MONITOR_LEN
  * bd->bi_flashoffset=0
  *
  */
@@ -174,13 +174,13 @@ unsigned long flash_init (void)
 			"MPS" : "Flash");
 #endif /* #if !defined(CONFIG_PATI) */
 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
 	/* Static FLASH Bank configuration here - FIXME XXX */
 
-	size_b0 = flash_get_size((vu_long *)CFG_MONITOR_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_MONITOR_BASE, &flash_info[0]);
 
 	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
@@ -188,10 +188,10 @@ unsigned long flash_init (void)
 	}
 	/* protect the bootloader */
 	/* Monitor protection ON by default */
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	flash_protect(FLAG_PROTECT_SET,
-			CFG_MONITOR_BASE,
-			CFG_MONITOR_BASE+monitor_flash_len-1,
+			CONFIG_SYS_MONITOR_BASE,
+			CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 			&flash_info[0]);
 #endif
 #if !defined(CONFIG_PATI)
@@ -555,7 +555,7 @@ int wait_for_DQ7(flash_info_t *info, int sect)
 	start = get_timer (0);
 	last  = start;
 	while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return ERR_TIMOUT;
 		}
@@ -576,7 +576,7 @@ int intel_wait_for_DQ7(flash_info_t *info, int sect)
 	start = get_timer (0);
 	last  = start;
 	while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return ERR_TIMOUT;
 		}
@@ -848,7 +848,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 			udelay(10);
 			while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080)
 			{
-				if (get_timer(start) > CFG_FLASH_WRITE_TOUT)
+				if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
 					return (1);
 			}
 			dest2[i] = (FLASH_WORD_SIZE)0x00FF00FF; /* return to read mode */
@@ -869,7 +869,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 			start = get_timer (0);
 			while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) !=
 				(data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
-				if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+				if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 					return (1);
 				}
 			}
diff --git a/board/mpl/common/isa.c b/board/mpl/common/isa.c
index 51b2773c71..91829d44f3 100644
--- a/board/mpl/common/isa.c
+++ b/board/mpl/common/isa.c
@@ -113,9 +113,9 @@ const SIO_LOGDEV_TABLE sio_keyboard[] = {
 ********************************************************************************/
 unsigned char open_cfg_super_IO(int address)
 {
-	out8(CFG_ISA_IO_BASE_ADDRESS | address,0x55); /* open config */
-	out8(CFG_ISA_IO_BASE_ADDRESS | address,0x20); /* set address to DEV ID */
-	if(in8(CFG_ISA_IO_BASE_ADDRESS | address | 0x1)==0x40) /* ok Device ID is correct */
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,0x55); /* open config */
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,0x20); /* set address to DEV ID */
+	if(in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address | 0x1)==0x40) /* ok Device ID is correct */
 		return TRUE;
 	else
 		return FALSE;
@@ -123,26 +123,26 @@ unsigned char open_cfg_super_IO(int address)
 
 void close_cfg_super_IO(int address)
 {
-	out8(CFG_ISA_IO_BASE_ADDRESS | address,0xAA); /* close config */
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,0xAA); /* close config */
 }
 
 
 unsigned char read_cfg_super_IO(int address, unsigned char function, unsigned char regaddr)
 {
 	/* assuming config reg is open */
-	out8(CFG_ISA_IO_BASE_ADDRESS | address,0x7); /* points to the function reg */
-	out8(CFG_ISA_IO_BASE_ADDRESS | address | 1,function); /* set the function no */
-	out8(CFG_ISA_IO_BASE_ADDRESS | address,regaddr); /* sets the address in the function */
-	return in8(CFG_ISA_IO_BASE_ADDRESS | address | 1);
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,0x7); /* points to the function reg */
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address | 1,function); /* set the function no */
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,regaddr); /* sets the address in the function */
+	return in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address | 1);
 }
 
 void write_cfg_super_IO(int address, unsigned char function, unsigned char regaddr, unsigned char data)
 {
 	/* assuming config reg is open */
-	out8(CFG_ISA_IO_BASE_ADDRESS | address,0x7); /* points to the function reg */
-	out8(CFG_ISA_IO_BASE_ADDRESS | address | 1,function); /* set the function no */
-	out8(CFG_ISA_IO_BASE_ADDRESS | address,regaddr); /* sets the address in the function */
-	out8(CFG_ISA_IO_BASE_ADDRESS | address | 1,data); /* writes the data */
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,0x7); /* points to the function reg */
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address | 1,function); /* set the function no */
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address,regaddr); /* sets the address in the function */
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS | address | 1,data); /* writes the data */
 }
 
 void isa_write_table(SIO_LOGDEV_TABLE *ldt,unsigned char ldev)
@@ -208,12 +208,12 @@ static unsigned int cached_irq_mask = 0xfff9;
 
 #define cached_imr1	(unsigned char)cached_irq_mask
 #define cached_imr2	(unsigned char)(cached_irq_mask>>8)
-#define IMR_1		CFG_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT1_OCW1
-#define IMR_2		CFG_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT2_OCW1
-#define ICW1_1	CFG_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT1_ICW1
-#define ICW1_2	CFG_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT2_ICW1
-#define ICW2_1	CFG_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT1_ICW2
-#define ICW2_2	CFG_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT2_ICW2
+#define IMR_1		CONFIG_SYS_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT1_OCW1
+#define IMR_2		CONFIG_SYS_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT2_OCW1
+#define ICW1_1	CONFIG_SYS_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT1_ICW1
+#define ICW1_2	CONFIG_SYS_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT2_ICW1
+#define ICW2_1	CONFIG_SYS_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT1_ICW2
+#define ICW2_2	CONFIG_SYS_ISA_IO_BASE_ADDRESS + PIIX4_ISA_INT2_ICW2
 #define ICW3_1	ICW2_1
 #define ICW3_2	ICW2_2
 #define ICW4_1	ICW2_1
diff --git a/board/mpl/common/kbd.c b/board/mpl/common/kbd.c
index b20b9532b1..a457635d4d 100644
--- a/board/mpl/common/kbd.c
+++ b/board/mpl/common/kbd.c
@@ -203,7 +203,7 @@ int isa_kbd_init(void)
 	}
 }
 
-#ifdef CFG_CONSOLE_OVERWRITE_ROUTINE
+#ifdef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 extern int overwrite_console (void);
 #else
 int overwrite_console (void)
@@ -452,22 +452,22 @@ unsigned char handle_kbd_event(void)
  */
 unsigned char kbd_read_status(void)
 {
-	return(in8(CFG_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT));
+	return(in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT));
 }
 
 unsigned char kbd_read_input(void)
 {
-	return(in8(CFG_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT));
+	return(in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT));
 }
 
 void kbd_write_command(unsigned char cmd)
 {
-	out8(CFG_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT,cmd);
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT,cmd);
 }
 
 void kbd_write_output(unsigned char data)
 {
-	out8(CFG_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT, data);
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT, data);
 }
 
 int kbd_read_data(void)
diff --git a/board/mpl/common/usb_uhci.c b/board/mpl/common/usb_uhci.c
index 666b999e37..ad304426eb 100644
--- a/board/mpl/common/usb_uhci.c
+++ b/board/mpl/common/usb_uhci.c
@@ -621,7 +621,7 @@ int usb_lowlevel_init(void)
 	pci_read_config_dword(busdevfunc,PCI_BASE_ADDRESS_4,&usb_base_addr);
 	USB_UHCI_PRINTF("IO Base Address = 0x%lx\n",usb_base_addr);
 	usb_base_addr&=0xFFFFFFF0;
-	usb_base_addr+=CFG_ISA_IO_BASE_ADDRESS;
+	usb_base_addr+=CONFIG_SYS_ISA_IO_BASE_ADDRESS;
 	rh.devnum = 0;
 	usb_init_skel();
 	reset_hc();
diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c
index cf0afd1add..5eb90e5903 100644
--- a/board/mpl/mip405/mip405.c
+++ b/board/mpl/mip405/mip405.c
@@ -250,7 +250,7 @@ int init_sdram (void)
 	unsigned char	bc;
 	unsigned long	sdram_tim, sdram_bank;
 
-	/*i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);*/
+	/*i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);*/
 	(void) get_clocks ();
 	gd->baudrate = 9600;
 	serial_init ();
@@ -320,7 +320,7 @@ int init_sdram (void)
 	serial_puts ("\n");
 #endif
 	i = 0;
-	baseaddr = CFG_SDRAM_BASE;
+	baseaddr = CONFIG_SYS_SDRAM_BASE;
 	while (sdram_table[i].sz != 0xff) {
 		if (sdram_table[i].boardtype == bc)
 			break;
@@ -679,7 +679,7 @@ int misc_init_r (void)
 {
 	/* adjust flash start and size as well as the offset */
 	gd->bd->bi_flashstart=0-flash_info[0].size;
-	gd->bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN;
+	gd->bd->bi_flashsize=flash_info[0].size-CONFIG_SYS_MONITOR_LEN;
 	gd->bd->bi_flashoffset=0;
 
 	/* check, if RTC is running */
diff --git a/board/mpl/pati/cmd_pati.c b/board/mpl/pati/cmd_pati.c
index 91683a38d1..9d9531b54f 100644
--- a/board/mpl/pati/cmd_pati.c
+++ b/board/mpl/pati/cmd_pati.c
@@ -37,7 +37,7 @@ extern void user_led0(int led_on);
 extern void user_led1(int led_on);
 
 /* ------------------------------------------------------------------------- */
-#if defined(CFG_PCI_CON_DEVICE)
+#if defined(CONFIG_SYS_PCI_CON_DEVICE)
 extern void pci_con_disc(void);
 extern void pci_con_connect(void);
 #endif
@@ -378,7 +378,7 @@ int do_pati(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			user_led1(led_on);
 		return 0;
 	}
-#if defined(CFG_PCI_CON_DEVICE)
+#if defined(CONFIG_SYS_PCI_CON_DEVICE)
 	if (strcmp(argv[1], "con") == 0) {
 		pci_con_connect();
 		return 0;
diff --git a/board/mpl/pati/pati.c b/board/mpl/pati/pati.c
index 0883c429fa..85c5af956d 100644
--- a/board/mpl/pati/pati.c
+++ b/board/mpl/pati/pati.c
@@ -224,7 +224,7 @@ phys_size_t initdram(int board_type)
 	/* rest standard operation programmed write burst length */
 	/* we have a x32 bit bus to the SDRAM, so shift the addr with 2 */
 	lmr<<=2;
-	in32(CFG_SDRAM_BASE + lmr);
+	in32(CONFIG_SYS_SDRAM_BASE + lmr);
 	/* ok, we're done, return SDRAM size */
 	return ((0x400000 << sdram_table[i].sz));		/* log2 value of 4MByte  */
 }
@@ -287,7 +287,7 @@ void show_pld_regs(void)
  ****************************************************************/
  void init_ios(void)
  {
-	volatile immap_t * immr = (immap_t *) CFG_IMMR;
+	volatile immap_t * immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
 	unsigned long reg;
 	reg=sysconf->sc_sgpiocr; /* Data direction register */
@@ -304,7 +304,7 @@ void show_pld_regs(void)
 
 void user_led0(int led_on)
 {
-	volatile immap_t * immr = (immap_t *) CFG_IMMR;
+	volatile immap_t * immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
 	unsigned long reg;
 	reg=sysconf->sc_sgpiodt2; /* Data register */
@@ -317,7 +317,7 @@ void user_led0(int led_on)
 
 void user_led1(int led_on)
 {
-	volatile immap_t * immr = (immap_t *) CFG_IMMR;
+	volatile immap_t * immr = (immap_t *) CONFIG_SYS_IMMR;
 	volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
 	unsigned long reg;
 	reg=sysconf->sc_sgpiodt2; /* Data register */
@@ -370,7 +370,7 @@ int checkboard (void)
 }
 
 
-#ifdef CFG_PCI_CON_DEVICE
+#ifdef CONFIG_SYS_PCI_CON_DEVICE
 /************************************************************************
  * PCI Communication
  *
@@ -610,9 +610,9 @@ void pci_con_disc(void)
 	irq_free_handler(0x02);
 	pci_con_connect();
 }
-#endif /* #ifdef CFG_PCI_CON_DEVICE */
+#endif /* #ifdef CONFIG_SYS_PCI_CON_DEVICE */
 
 /*
  * Absolute environment address for linker file.
  */
-GEN_ABS(env_start, CONFIG_ENV_OFFSET + CFG_FLASH_BASE);
+GEN_ABS(env_start, CONFIG_ENV_OFFSET + CONFIG_SYS_FLASH_BASE);
diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c
index 6cba892e78..3be0104709 100644
--- a/board/mpl/pip405/pip405.c
+++ b/board/mpl/pip405/pip405.c
@@ -208,7 +208,7 @@ int board_early_init_f (void)
 #endif
 
 	/* Read Serial Presence Detect Information */
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 	dataout[0] = 0;
 	for (i = 0; i < 128; i++)
 		datain[i] = 127;
@@ -386,7 +386,7 @@ int board_early_init_f (void)
 	/* write SDRAM timing register */
 	mtdcr (memcfga, mem_sdtr1);
 	mtdcr (memcfgd, tmp);
-	baseaddr = CFG_SDRAM_BASE;
+	baseaddr = CONFIG_SYS_SDRAM_BASE;
 	bank_size = (((unsigned long) density) << 22) / 2;
 	/* insert AM value */
 	tmp = ((unsigned long) t->mode - 1) << 13;
@@ -663,7 +663,7 @@ int misc_init_r (void)
 {
 	/* adjust flash start and size as well as the offset */
 	gd->bd->bi_flashstart=0-flash_info[0].size;
-	gd->bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN;
+	gd->bd->bi_flashsize=flash_info[0].size-CONFIG_SYS_MONITOR_LEN;
 	gd->bd->bi_flashoffset=0;
 
 	/* if PIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */
diff --git a/board/mpl/pip405/pip405.h b/board/mpl/pip405/pip405.h
index 5815786ebf..704ab2c71d 100644
--- a/board/mpl/pip405/pip405.h
+++ b/board/mpl/pip405/pip405.h
@@ -35,7 +35,7 @@ void user_led0(unsigned char on);
 void user_led1(unsigned char on);
 
 
-#define PLD_BASE_ADDRESS		CFG_ISA_IO_BASE_ADDRESS + 0x800
+#define PLD_BASE_ADDRESS		CONFIG_SYS_ISA_IO_BASE_ADDRESS + 0x800
 #define PLD_PART_REG			PLD_BASE_ADDRESS + 0
 #define PLD_VERS_REG			PLD_BASE_ADDRESS + 1
 #define PLD_BOARD_CFG_REG		PLD_BASE_ADDRESS + 2
diff --git a/board/mpl/vcma9/flash.c b/board/mpl/vcma9/flash.c
index 3895263fbe..7abf9cfba0 100644
--- a/board/mpl/vcma9/flash.c
+++ b/board/mpl/vcma9/flash.c
@@ -30,7 +30,7 @@ ulong myflush (void);
 #define FLASH_BANK_SIZE	PHYS_FLASH_SIZE
 #define MAIN_SECT_SIZE  0x10000	/* 64 KB */
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
 
 #define CMD_READ_ARRAY		0x000000F0
@@ -41,8 +41,8 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
 #define CMD_PROGRAM		0x000000A0
 #define CMD_UNLOCK_BYPASS	0x00000020
 
-#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1)))
-#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA << 1)))
+#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555 << 1)))
+#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA << 1)))
 
 #define BIT_ERASE_DONE		0x00000080
 #define BIT_RDY_MASK		0x00000080
@@ -61,7 +61,7 @@ ulong flash_init (void)
 	int i, j;
 	ulong size = 0;
 
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		ulong flashbase = 0;
 
 		flash_info[i].flash_id =
@@ -75,8 +75,8 @@ ulong flash_init (void)
 #error "Unknown flash configured"
 #endif
 			flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+		memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 		if (i == 0)
 			flashbase = PHYS_FLASH_1;
 		else
@@ -111,8 +111,8 @@ ulong flash_init (void)
 	}
 
 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_FLASH_BASE,
-		       CFG_FLASH_BASE + monitor_flash_len - 1,
+		       CONFIG_SYS_FLASH_BASE,
+		       CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 		       &flash_info[0]);
 
 	flash_protect (FLAG_PROTECT_SET,
@@ -236,7 +236,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 
 				/* check timeout */
 				if (get_timer_masked () >
-				    CFG_FLASH_ERASE_TOUT) {
+				    CONFIG_SYS_FLASH_ERASE_TOUT) {
 					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
 					chip = TMO;
 					break;
@@ -331,7 +331,7 @@ static int write_hword (flash_info_t * info, ulong dest, ushort data)
 		result = *addr;
 
 		/* check timeout */
-		if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			chip = ERR | TMO;
 			break;
 		}