Support for the MX31ADS evaluation board from Freescale

This patch adds support for the MX31ADS evaluation board from Freescale,
initialization code is copied from RedBoot sources, also provided by Freescale.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>

1 files changed, 94 insertions, 0 deletions

diff --git a/board/mx31ads/mx31ads.c b/board/mx31ads/mx31ads.c
new file mode 100644
index 0000000000..fe26b73183
--- /dev/null
+++ b/board/mx31ads/mx31ads.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/mx31.h>
+#include <asm/arch/mx31-regs.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return 0;
+}
+
+int board_init(void)
+{
+	int i;
+#if 0
+	/* CS0: Nor Flash */
+	/*
+	 * These are values from the RedBoot sources by Freescale. However,
+	 * under U-Boot with this configuration 32-bit accesses don't work,
+	 * lower 16 bits of data are read twice for each 32-bit read.
+	 */
+	__REG(CSCR_U(0)) = 0x23524E80;
+	__REG(CSCR_L(0)) = 0x10000D03; /* WRAP bit (1) is suspicious here, but
+					* disabling it doesn't help either */
+	__REG(CSCR_A(0)) = 0x00720900;
+#endif
+
+	/* setup pins for UART1 */
+	mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
+	mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
+	mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
+	mx31_gpio_mux(MUX_RTS1__UART1_CTS_B);
+
+	/* PBC setup */
+	/* Enable UART transceivers also reset the Ethernet/external UART */
+	readw(CS4_BASE + 4);
+
+	writew(0x8023, CS4_BASE + 4);
+
+	/* RedBoot also has an empty loop with 100000 iterations here -
+	 * clock doesn't run yet */
+	for (i = 0; i < 100000; i++)
+		;
+
+	/* Clear the reset, toggle the LEDs */
+	writew(0xDF, CS4_BASE + 6);
+
+	/* clock still doesn't run */
+	for (i = 0; i < 100000; i++)
+		;
+
+	/* See 1.5.4 in IMX31ADSE_PERI_BUS_CNTRL_CPLD_RM.pdf */
+	readb(CS4_BASE + 8);
+	readb(CS4_BASE + 7);
+	readb(CS4_BASE + 8);
+	readb(CS4_BASE + 7);
+
+	gd->bd->bi_arch_number = 447;		/* board id for linux */
+	gd->bd->bi_boot_params = 0x80000100;	/* adress of boot parameters */
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	printf("Board: MX31ADS\n");
+	return 0;
+}