Update make target for ARM supported boards.

Use lowlevel_init() instead of platformsetup() [rename].
Patch by Peter Pearse, 06 Oct 2005

1 files changed, 298 insertions, 0 deletions

diff --git a/board/ns9750dev/lowlevel_init.S b/board/ns9750dev/lowlevel_init.S
new file mode 100644
index 0000000000..3a0978663a
--- /dev/null
+++ b/board/ns9750dev/lowlevel_init.S
@@ -0,0 +1,298 @@
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * Modified for the NS9750 DevBoard by
+ * (C) Copyright 2004 by FS Forth-Systeme GmbH.
+ * Markus Pietrek <mpietrek@fsforth.de>
+ * @References: [1] NS9750 Hardware Reference/December 2003
+ *	        [2] ns9750_a.cmd from MAJIC configuration
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+#if defined(CONFIG_NS9750DEV)
+# ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#  include <./ns9750_sys.h>
+#  include <./ns9750_mem.h>
+# endif
+#endif
+
+/***********************************************************************
+ * @Function: write_register_block
+ * @Return: nothing
+ * @Descr: Copies the register block of register_offset:register value to
+ *         the registers at base r0. The block is assumed to start in RAM at r1
+ *         and end at r2. The linked RAM base address of U-Boot is assumed to be
+ *	   in r5 while the ROM base address we are running from is r6
+ *         Uses r3 and r4 as tempory registers
+ ***********************************************************************/
+
+.macro	write_register_block
+	@@ map the addresses to high memory
+	sub	r1, r1, r5
+	add	r1, r1, r6
+	sub	r2, r2, r5
+	add	r2, r2, r6
+
+	@@ copy all
+1:
+	@@ Write register/value pair starting at [r1] to register base r0
+	ldr	r3, [r1], #4
+	ldr	r4, [r1], #4
+	str	r4, [r0,r3]
+	cmp	r1, r2
+	blt	1b
+.endm
+
+_TEXT_BASE:
+	.word	TEXT_BASE	@ sdram load addr from config.mk
+_PHYS_FLASH:
+	.word	PHYS_FLASH_1    @ real flash address (without mirroring)
+_CAS_LATENCY:
+	.word	0x00022000	@ for CAS2 latency
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+.globl lowlevel_init
+lowlevel_init:
+
+	/* U-Boot may be linked to RAM at 0x780000. But this code will run in
+	   flash from 0x0. But in order to enable RAM we have to disable the
+	   mirror bit, therefore we have to jump to our real flash address
+	   beginning at PHYS_FLASH_1 (CS4 Base). Therefore,
+	   _run_at_real_flash_address may be 0x500003b0 while be linked to
+	   0x7803b0. So we must modify our linked addresses */
+
+	@@ branch to high memory address, away from 0x0
+	ldr	r5, _TEXT_BASE
+	ldr	r6, _PHYS_FLASH
+	ldr	r0, =_run_at_real_flash_address
+	sub	r0, r0, r5
+	add	r0, r0, r6
+	mov	pc, r0
+	nop			@ for pipelining
+
+_run_at_real_flash_address:
+	@@ now we are running > PHYS_FLASH_1, safe to enable memory controller
+
+	@@ Write Memory Configuration Registers
+
+	ldr	r0, _NS9750_MEM_MODULE_BASE
+	ldr	r1, =_MEM_CONFIG_START
+	ldr	r2, =_MEM_CONFIG_END
+
+	write_register_block
+
+	@@ Give SDRAM some time to settle
+	@@ @TODO. According to [2] it should be 2 AHB cycles. Check
+
+	ldr	r1, =0x50
+_sdram_settle:
+	subs	r1, r1, #1
+	bne	_sdram_settle
+
+_enable_mappings:
+	@@ Enable SDRAM Mode
+
+	ldr	r1, =_MEM_MODE_START
+	ldr	r2, =_MEM_MODE_END
+
+	write_register_block
+
+	ldr	r3, _CAS_LATENCY @ perform one read from SDRAM
+	ldr	r3, [r3]
+
+	@@ Enable SDRAM and memory mappings
+
+	ldr	r1, =_MEM_ENABLE_START
+	ldr	r2, =_MEM_ENABLE_END
+
+	write_register_block
+
+	@@ Activate AHB monitor
+
+	ldr	r0, =NS9750_SYS_MODULE_BASE
+	ldr	r1, =_AHB_MONITOR_START
+	ldr	r2, =_AHB_MONITOR_END
+
+	write_register_block
+_relocate_lr:
+	/* lr and ip (from cpu_init_crit) are still based on 0x0, relocate it to
+	   PHYS_FLASH. */
+	mov	r1, ip
+	add	r1, r1, r6
+	mov	ip, r1
+
+	mov	r1, lr
+	add	r1, r1, r6
+	mov	lr, r1
+
+	@@ back to arch calling code
+	mov	pc,	lr
+
+	.ltorg
+
+_NS9750_MEM_MODULE_BASE:
+	.word	NS9750_MEM_MODULE_BASE
+
+_MEM_CONFIG_START:
+	/* Table of 2 32bit entries. First word is register address offset
+	   relative to NS9750_MEM_MODULE_BASE, second one is value. They are
+	   written in order of appearance */
+
+	@@ Register values taken from [2]
+	.word	NS9750_MEM_CTRL
+	.word	NS9750_MEM_CTRL_E
+
+	.word	NS9750_MEM_DYN_REFRESH
+	.word	(0x6 & NS9750_MEM_DYN_REFRESH_MA)
+
+	.word	NS9750_MEM_DYN_READ_CFG
+	.word	(0x1 & NS9750_MEM_DYN_READ_CFG_MA)
+
+	.word	NS9750_MEM_DYN_TRP
+	.word	(0x1 & NS9750_MEM_DYN_TRP_MA)
+
+	.word	NS9750_MEM_DYN_TRAS
+	.word	(0x4 & NS9750_MEM_DYN_TRAS_MA)
+
+	.word	NS9750_MEM_DYN_TAPR
+	.word	(0x1 & NS9750_MEM_DYN_TRAS_MA)
+
+	.word	NS9750_MEM_DYN_TDAL
+	.word	(0x5 & NS9750_MEM_DYN_TDAL_MA)
+
+	.word	NS9750_MEM_DYN_TWR
+	.word	(0x1 & NS9750_MEM_DYN_TWR_MA)
+
+	.word	NS9750_MEM_DYN_TRC
+	.word	(0x6 & NS9750_MEM_DYN_TRC_MA)
+
+	.word	NS9750_MEM_DYN_TRFC
+	.word	(0x6 & NS9750_MEM_DYN_TRFC_MA)
+
+	.word	NS9750_MEM_DYN_TRRD
+	.word	(0x1 & NS9750_MEM_DYN_TRRD_MA)
+
+	.word	NS9750_MEM_DYN_TMRD
+	.word	(0x1 & NS9750_MEM_DYN_TMRD_MA)
+
+	@@ CS 4
+	.word	NS9750_MEM_DYN_CFG(0)
+	.word	(NS9750_MEM_DYN_CFG_AM | \
+		 (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
+
+	.word	NS9750_MEM_DYN_RAS_CAS(0)
+	.word	((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
+		 (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))
+
+	@@ CS 5
+	.word	NS9750_MEM_DYN_CFG(1)
+	.word	(NS9750_MEM_DYN_CFG_AM | \
+		 (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
+
+	.word	NS9750_MEM_DYN_RAS_CAS(1)
+	.word	((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
+		 (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))
+
+	@@ CS 6
+	.word	NS9750_MEM_DYN_CFG(2)
+	.word	(NS9750_MEM_DYN_CFG_AM | \
+		 (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
+
+	.word	NS9750_MEM_DYN_RAS_CAS(2)
+	.word	((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
+		 (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))
+
+	@@ CS 7
+	.word	NS9750_MEM_DYN_CFG(3)
+	.word	(NS9750_MEM_DYN_CFG_AM | \
+		 (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
+
+	.word	NS9750_MEM_DYN_RAS_CAS(3)
+	.word	((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
+		 (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))
+
+	.word	NS9750_MEM_DYN_CTRL
+	.word	(NS9750_MEM_DYN_CTRL_I_PALL | \
+		 NS9750_MEM_DYN_CTRL_SR | \
+		 NS9750_MEM_DYN_CTRL_CE )
+
+	.word	NS9750_MEM_DYN_REFRESH
+	.word	(0x1 & NS9750_MEM_DYN_REFRESH_MA)
+	@@ No further register settings after refresh
+_MEM_CONFIG_END:
+
+_MEM_MODE_START:
+	.word	NS9750_MEM_DYN_REFRESH
+	.word	(0x30 & NS9750_MEM_DYN_REFRESH_MA)
+
+	.word	NS9750_MEM_DYN_CTRL
+	.word	(NS9750_MEM_DYN_CTRL_I_MODE | \
+		 NS9750_MEM_DYN_CTRL_SR | \
+		 NS9750_MEM_DYN_CTRL_CE )
+_MEM_MODE_END:
+
+_MEM_ENABLE_START:
+	.word	NS9750_MEM_DYN_CTRL
+	.word	(NS9750_MEM_DYN_CTRL_I_NORMAL | \
+		 NS9750_MEM_DYN_CTRL_SR | \
+		 NS9750_MEM_DYN_CTRL_CE )
+
+	@@ CS 4
+	.word	NS9750_MEM_DYN_CFG(0)
+	.word	(NS9750_MEM_DYN_CFG_BDMC | \
+		 NS9750_MEM_DYN_CFG_AM | \
+		 (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
+
+	@@ CS 5
+	.word	NS9750_MEM_DYN_CFG(1)
+	.word	(NS9750_MEM_DYN_CFG_BDMC | \
+		 NS9750_MEM_DYN_CFG_AM | \
+		 (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
+
+	@@ CS 6
+	.word	NS9750_MEM_DYN_CFG(2)
+	.word	(NS9750_MEM_DYN_CFG_BDMC | \
+		 NS9750_MEM_DYN_CFG_AM | \
+		 (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
+
+	@@ CS 7
+	.word	NS9750_MEM_DYN_CFG(3)
+	.word	(NS9750_MEM_DYN_CFG_BDMC | \
+		 NS9750_MEM_DYN_CFG_AM | \
+		 (0x280 & NS9750_MEM_DYN_CFG_AM_MA))
+_MEM_ENABLE_END:
+
+_AHB_MONITOR_START:
+	.word	NS9750_SYS_AHB_TIMEOUT
+	.word	0x01000100	@ @TODO not calculated yet
+
+	.word	NS9750_SYS_AHB_MON
+	.word	(NS9750_SYS_AHB_MON_BMTC_GEN_IRQ | \
+		 NS9750_SYS_AHB_MON_BATC_GEN_IRQ)
+_AHB_MONITOR_END:
+
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */