diff options
author | Thierry Reding <treding@nvidia.com> | 2014-12-09 22:25:17 -0700 |
---|---|---|
committer | Tom Warren <twarren@nvidia.com> | 2014-12-18 13:19:21 -0700 |
commit | 5a2c96a0e5d1dfc13f71b295f07be8a4b7ac8fdb (patch) | |
tree | f911a21075ae6af26da9074b205b9048d76936ee /board/nvidia/cardhu/cardhu.c | |
parent | a1811bc5b999998ef5f42e2312a1140eb7cf3957 (diff) |
ARM: tegra: Enable PCIe on Cardhu
The PCIe bus on Cardhu is routed to the dock connector. An ethernet NIC
is available on the dock over the PCIe bus. Enable the PCIe controller
and the network device driver so that the device can boot over the
network.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Diffstat (limited to 'board/nvidia/cardhu/cardhu.c')
-rw-r--r-- | board/nvidia/cardhu/cardhu.c | 52 |
1 files changed, 52 insertions, 0 deletions
diff --git a/board/nvidia/cardhu/cardhu.c b/board/nvidia/cardhu/cardhu.c index 026f45c6c6..95c4ff2509 100644 --- a/board/nvidia/cardhu/cardhu.c +++ b/board/nvidia/cardhu/cardhu.c @@ -9,8 +9,11 @@ #include <dm.h> #include <asm/arch/pinmux.h> #include <asm/arch/gp_padctrl.h> +#include <asm/arch/gpio.h> +#include <asm/gpio.h> #include "pinmux-config-cardhu.h" #include <i2c.h> +#include <netdev.h> #define PMU_I2C_ADDRESS 0x2D #define MAX_I2C_RETRY 3 @@ -83,3 +86,52 @@ void pin_mux_mmc(void) board_sdmmc_voltage_init(); } #endif /* MMC */ + +#ifdef CONFIG_PCI_TEGRA +int tegra_pcie_board_init(void) +{ + struct udevice *dev; + u8 addr, data[1]; + int err; + + err = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev); + if (err) { + debug("failed to find PMU bus\n"); + return err; + } + + /* TPS659110: LDO1_REG = 1.05V, ACTIVE */ + data[0] = 0x15; + addr = 0x30; + + err = i2c_write(dev, addr, data, 1); + if (err) { + debug("failed to set VDD supply\n"); + return err; + } + + /* GPIO: PEX = 3.3V */ + err = gpio_request(GPIO_PL7, "PEX"); + if (err < 0) + return err; + + gpio_direction_output(GPIO_PL7, 1); + + /* TPS659110: LDO2_REG = 1.05V, ACTIVE */ + data[0] = 0x15; + addr = 0x31; + + err = i2c_write(dev, addr, data, 1); + if (err) { + debug("failed to set AVDD supply\n"); + return err; + } + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} +#endif /* PCI */ |