diff options
| author | Stephen Warren <swarren@nvidia.com> | 2012-11-02 06:56:13 +0000 |
|---|---|---|
| committer | Tom Warren <twarren@nvidia.com> | 2012-11-19 08:15:42 -0700 |
| commit | 72573543b5b9f788b46fb9e7ab3372cfeba8d25f (patch) | |
| tree | bbf2323e3cfe21d4faa0e5599cfcce7ea35c5cd6 /board/nvidia/harmony/harmony.c | |
| parent | 8c0ec0dbc4cce76c6c745858116a404791d28b8b (diff) | |
ARM: tegra: enable 8-bit SD slots in board files
Harmony contains an SD slot with all 8 bits routed. This allows plugging
in an eMMC-chip-in-SD-form-factor.
Seaboard/Springbank/Ventana/AC100 all have an eMMC chip with all 8 bits
hooked up.
Now that the U-Boot eMMC code fully supports 8-bit operation, initialize
those ports as 8-bit instead of 4-bit to improve performance.
Whistler was already registering its ports as 8-bit.
TrimSlice doesn't have any 8-bit ports.
I don't have any Avionic Design boards nor the Colibri board to test with.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Diffstat (limited to 'board/nvidia/harmony/harmony.c')
| -rw-r--r-- | board/nvidia/harmony/harmony.c | 5 |
1 files changed, 2 insertions, 3 deletions
diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c index c7590ac6cf..93430edd3b 100644 --- a/board/nvidia/harmony/harmony.c +++ b/board/nvidia/harmony/harmony.c @@ -64,9 +64,8 @@ int board_mmc_init(bd_t *bd) pin_mux_mmc(); debug("board_mmc_init: init SD slot J26\n"); - /* init dev 0, SD slot J26, with 4-bit bus */ - /* The board has an 8-bit bus, but 8-bit doesn't work yet */ - tegra_mmc_init(0, 4, GPIO_PI6, GPIO_PH2); + /* init dev 0, SD slot J26, with 8-bit bus */ + tegra_mmc_init(0, 8, GPIO_PI6, GPIO_PH2); debug("board_mmc_init: init SD slot J5\n"); /* init dev 2, SD slot J5, with 4-bit bus */ |