Merge branch 'master' of git://git.denx.de/u-boot-arm

6 files changed, 25 insertions, 18 deletions

diff --git a/board/nvidia/common/Makefile b/board/nvidia/common/Makefile
index a93d4583e7..f6f419e0ce 100644
--- a/board/nvidia/common/Makefile
+++ b/board/nvidia/common/Makefile
@@ -25,9 +25,7 @@ endif
 
 LIB	= $(obj)lib$(VENDOR).o
 
-COBJS-y += board.o
-COBJS-$(CONFIG_SPI_UART_SWITCH) += uart-spi-switch.o
-COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o
+include common.mk
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/board/nvidia/common/common.mk b/board/nvidia/common/common.mk
new file mode 100644
index 0000000000..bd6202c299
--- /dev/null
+++ b/board/nvidia/common/common.mk
@@ -0,0 +1,4 @@
+# common options for all tegra boards
+COBJS-y	+= ../../nvidia/common/board.o
+COBJS-$(CONFIG_SPI_UART_SWITCH) += ../../nvidia/common/uart-spi-switch.o
+COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += ../../nvidia/common/emc.o
diff --git a/board/nvidia/dts/tegra20-harmony.dts b/board/nvidia/dts/tegra20-harmony.dts
index ca5facb7fe..5645a8d477 100644
--- a/board/nvidia/dts/tegra20-harmony.dts
+++ b/board/nvidia/dts/tegra20-harmony.dts
@@ -8,6 +8,7 @@
 
 	aliases {
 		usb0 = "/usb@c5008000";
+		usb1 = "/usb@c5004000";
 	};
 
 	memory {
@@ -52,7 +53,7 @@
 	};
 
 	usb@c5004000 {
-		status = "disabled";
+		nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
 	};
 
 	nand-controller@70008000 {
diff --git a/board/nvidia/dts/tegra20-whistler.dts b/board/nvidia/dts/tegra20-whistler.dts
index 38599bd67d..f830cf3995 100644
--- a/board/nvidia/dts/tegra20-whistler.dts
+++ b/board/nvidia/dts/tegra20-whistler.dts
@@ -9,7 +9,6 @@
 	aliases {
 		i2c0 = "/i2c@7000d000";
 		usb0 = "/usb@c5008000";
-		usb1 = "/usb@c5000000";
 	};
 
 	memory {
@@ -61,6 +60,10 @@
 		};
 	};
 
+	usb@c5000000 {
+		status = "disabled";
+	};
+
 	usb@c5004000 {
 		status = "disabled";
 	};
diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c
index 32ed9bb7d1..c7590ac6cf 100644
--- a/board/nvidia/harmony/harmony.c
+++ b/board/nvidia/harmony/harmony.c
@@ -75,3 +75,12 @@ int board_mmc_init(bd_t *bd)
 	return 0;
 }
 #endif
+
+void pin_mux_usb(void)
+{
+	funcmux_select(PERIPH_ID_USB2, FUNCMUX_USB2_ULPI);
+	pinmux_set_func(PINGRP_CDEV2, PMUX_FUNC_PLLP_OUT4);
+	pinmux_tristate_disable(PINGRP_CDEV2);
+	/* USB2 PHY reset GPIO */
+	pinmux_tristate_disable(PINGRP_UAC);
+}
diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c
index 4e8a183b8b..c412c077da 100644
--- a/board/nvidia/seaboard/seaboard.c
+++ b/board/nvidia/seaboard/seaboard.c
@@ -26,6 +26,7 @@
 #include <asm/arch/tegra.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/funcmux.h>
+#include <asm/arch/gpio.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch-tegra/mmc.h>
 #include <asm/gpio.h>
@@ -34,24 +35,15 @@
 #endif
 
 /* TODO: Remove this code when the SPI switch is working */
-#ifndef CONFIG_SPI_UART_SWITCH
-/*
- * Routine: gpio_config_uart_seaboard
- * Description: Force GPIO_PI3 low on Seaboard so UART4 works.
- */
-static void gpio_config_uart_seaboard(void)
+#if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
+void gpio_early_init_uart(void)
 {
 	/* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */
+#ifndef CONFIG_SPL_BUILD
 	gpio_request(GPIO_PI3, NULL);
+#endif
 	gpio_direction_output(GPIO_PI3, 0);
 }
-
-void gpio_early_init_uart(void)
-{
-	if (machine_is_ventana())
-		return;
-	gpio_config_uart_seaboard();
-}
 #endif
 
 #ifdef CONFIG_TEGRA_MMC