summaryrefslogtreecommitdiff
path: root/board/ppmc7xx
diff options
context:
space:
mode:
authorWolfgang Denk <wd@pollux.denx.de>2006-07-19 13:50:38 +0200
committerWolfgang Denk <wd@pollux.denx.de>2006-07-19 13:50:38 +0200
commitb87dfd2854809ddcf4be54d772752e7ed137386f (patch)
treed10a0446c375a2961223f12f553a51422bff553a /board/ppmc7xx
parentf3e06df7e89a1b6ff6701d523b4beea6e3fa5159 (diff)
Add support for TB5200 board
The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module integrated in a little aluminium case. Patch by Martin Krause, 8 Jun 2006 Some code cleanup
Diffstat (limited to 'board/ppmc7xx')
-rw-r--r--board/ppmc7xx/config.mk6
-rw-r--r--board/ppmc7xx/flash.c34
-rw-r--r--board/ppmc7xx/init.S214
-rw-r--r--board/ppmc7xx/ppmc7xx.c22
4 files changed, 136 insertions, 140 deletions
diff --git a/board/ppmc7xx/config.mk b/board/ppmc7xx/config.mk
index bcb6c81153..d8eac7753b 100644
--- a/board/ppmc7xx/config.mk
+++ b/board/ppmc7xx/config.mk
@@ -1,6 +1,6 @@
#
# (C) Copyright 2005
-# Richard Danter, Wind River Systems
+# Richard Danter, Wind River Systems
#
# (C) Copyright 2000
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -24,10 +24,6 @@
# MA 02111-1307 USA
#
-#
-#
-#
-
TEXT_BASE = 0xFFF00000
TEXT_END = 0xFFF40000
PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
diff --git a/board/ppmc7xx/flash.c b/board/ppmc7xx/flash.c
index 1cbcadc15f..4be6f13644 100644
--- a/board/ppmc7xx/flash.c
+++ b/board/ppmc7xx/flash.c
@@ -1,10 +1,10 @@
/*
* flash.c
* -------
- *
+ *
* Flash programming routines for the Wind River PPMC 74xx/7xx
* based on flash.c from the TQM8260 board.
- *
+ *
* By Richard Danter (richard.danter@windriver.com)
* Copyright (C) 2005 Wind River Systems
*/
@@ -27,13 +27,13 @@ void flash_reset (void)
{
unsigned long msr;
DWORD cmd_reset = 0x00F000F000F000F0LL;
-
+
if (flash_info[0].flash_id != FLASH_UNKNOWN) {
msr = get_msr ();
set_msr (msr | MSR_FP);
write_via_fpu ((DWORD*)flash_info[0].start[0], &cmd_reset );
-
+
set_msr (msr);
}
}
@@ -50,16 +50,16 @@ ulong flash_get_size (ulong baseaddr, flash_info_t * info)
/* Enable FPU */
msr = get_msr ();
- set_msr (msr | MSR_FP);
-
+ set_msr (msr | MSR_FP);
+
/* Write auto-select command sequence */
write_via_fpu ((DWORD*)(baseaddr + (0x0555 << 3)), &cmd_select[0] );
write_via_fpu ((DWORD*)(baseaddr + (0x02AA << 3)), &cmd_select[1] );
write_via_fpu ((DWORD*)(baseaddr + (0x0555 << 3)), &cmd_select[2] );
-
+
/* Restore FPU */
set_msr (msr);
-
+
/* Read manufacturer ID */
flashtest = *(volatile DWORD*)baseaddr;
switch ((int)flashtest) {
@@ -70,7 +70,7 @@ ulong flash_get_size (ulong baseaddr, flash_info_t * info)
info->flash_id = FLASH_MAN_FUJ;
break;
default:
- /* No, faulty or unknown flash */
+ /* No, faulty or unknown flash */
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
@@ -291,7 +291,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
DWORD cmd_erase[6] = { 0x00AA00AA00AA00AALL, 0x0055005500550055LL,
0x0080008000800080LL, 0x00AA00AA00AA00AALL,
0x0055005500550055LL, 0x0030003000300030LL };
-
+
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
printf ("- missing\n");
@@ -319,7 +319,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
/* Enable FPU */
msr = get_msr();
set_msr ( msr | MSR_FP );
-
+
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts ();
@@ -344,7 +344,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
/* Restore FPU */
set_msr (msr);
-
+
/* wait at least 80us - let's wait 1 ms */
udelay (1000);
@@ -373,7 +373,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
DONE:
/* reset to read mode */
flash_reset ();
-
+
printf (" done\n");
return 0;
}
@@ -446,7 +446,7 @@ static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata)
DWORD data;
DWORD cmd_write[3] = { 0x00AA00AA00AA00AALL, 0x0055005500550055LL,
0x00A000A000A000A0LL };
-
+
for (data = 0, i = 0; i < 8; i++)
data = (data << 8) + *pdata++;
@@ -454,11 +454,11 @@ static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata)
if ((*(DWORD*)dest & data) != data) {
return (2);
}
-
+
/* Enable FPU */
msr = get_msr();
set_msr( msr | MSR_FP );
-
+
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts ();
@@ -473,7 +473,7 @@ static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata)
/* Restore FPU */
set_msr(msr);
-
+
/* data polling for D7 */
start = get_timer (0);
while (*(volatile DWORD*)dest != data ) {
diff --git a/board/ppmc7xx/init.S b/board/ppmc7xx/init.S
index e4ed7a66c9..99a818ad02 100644
--- a/board/ppmc7xx/init.S
+++ b/board/ppmc7xx/init.S
@@ -21,314 +21,314 @@ board_asm_init:
ori r4,r4,0x0000
lis r5,0xFEE0
ori r5,r5,0x0000
- lis r3,0x8000 # ADDR_00
+ lis r3,0x8000 # ADDR_00
ori r3,r3,0x0000
stwbrx r3,0,r4
- li r3,0x1057 # VENDOR
+ li r3,0x1057 # VENDOR
li r8, 0x0
sthbrx r3,r8,r5
- lis r3,0x8000 # ADDR_02
+ lis r3,0x8000 # ADDR_02
ori r3,r3,0x0002
stwbrx r3,0,r4
- li r3,0x0004 # ID
+ li r3,0x0004 # ID
li r8, 0x2
sthbrx r3,r8,r5
- lis r3,0x8000 # ADDR_04
+ lis r3,0x8000 # ADDR_04
ori r3,r3,0x0004
stwbrx r3,0,r4
- li r3,0x0006 # PCICMD
+ li r3,0x0006 # PCICMD
li r8, 0x0
sthbrx r3,r8,r5
- lis r3,0x8000 # ADDR_06
+ lis r3,0x8000 # ADDR_06
ori r3,r3,0x0006
stwbrx r3,0,r4
- li r3,0x00A0 # PCISTAT
+ li r3,0x00A0 # PCISTAT
li r8, 0x2
sthbrx r3,r8,r5
- lis r3,0x8000 # ADDR_08
+ lis r3,0x8000 # ADDR_08
ori r3,r3,0x0008
stwbrx r3,0,r4
- li r3,0x10 # REVID
+ li r3,0x10 # REVID
stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_09
+ lis r3,0x8000 # ADDR_09
ori r3,r3,0x0009
stwbrx r3,0,r4
- li r3,0x00 # PROGIR
+ li r3,0x00 # PROGIR
stb r3,0x1(r5)
- lis r3,0x8000 # ADDR_0A
+ lis r3,0x8000 # ADDR_0A
ori r3,r3,0x000A
stwbrx r3,0,r4
- li r3,0x00 # SUBCCODE
+ li r3,0x00 # SUBCCODE
stb r3,0x2(r5)
- lis r3,0x8000 # ADDR_0B
+ lis r3,0x8000 # ADDR_0B
ori r3,r3,0x000B
stwbrx r3,0,r4
- li r3,0x06 # PBCCR
+ li r3,0x06 # PBCCR
stb r3,0x3(r5)
- lis r3,0x8000 # ADDR_0C
+ lis r3,0x8000 # ADDR_0C
ori r3,r3,0x000C
stwbrx r3,0,r4
- li r3,0x08 # PCLSR
+ li r3,0x08 # PCLSR
stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_0D
+ lis r3,0x8000 # ADDR_0D
ori r3,r3,0x000D
stwbrx r3,0,r4
- li r3,0x00 # PLTR
+ li r3,0x00 # PLTR
stb r3,0x1(r5)
- lis r3,0x8000 # ADDR_0E
+ lis r3,0x8000 # ADDR_0E
ori r3,r3,0x000E
stwbrx r3,0,r4
- li r3,0x00 # HEADTYPE
+ li r3,0x00 # HEADTYPE
stb r3,0x2(r5)
- lis r3,0x8000 # ADDR_0F
+ lis r3,0x8000 # ADDR_0F
ori r3,r3,0x000F
stwbrx r3,0,r4
- li r3,0x00 # BISTCTRL
+ li r3,0x00 # BISTCTRL
stb r3,0x3(r5)
- lis r3,0x8000 # ADDR_10
+ lis r3,0x8000 # ADDR_10
ori r3,r3,0x0010
stwbrx r3,0,r4
- lis r3,0x0000 # LMBAR
+ lis r3,0x0000 # LMBAR
ori r3,r3,0x0008
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_14
+ lis r3,0x8000 # ADDR_14
ori r3,r3,0x0014
stwbrx r3,0,r4
- lis r3,0xF000 # PCSRBAR
+ lis r3,0xF000 # PCSRBAR
ori r3,r3,0x0000
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_3C
+ lis r3,0x8000 # ADDR_3C
ori r3,r3,0x003C
stwbrx r3,0,r4
- li r3,0x00 # ILR
+ li r3,0x00 # ILR
stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_3D
+ lis r3,0x8000 # ADDR_3D
ori r3,r3,0x003D
stwbrx r3,0,r4
- li r3,0x01 # INTPIN
+ li r3,0x01 # INTPIN
stb r3,0x1(r5)
- lis r3,0x8000 # ADDR_3E
+ lis r3,0x8000 # ADDR_3E
ori r3,r3,0x003E
stwbrx r3,0,r4
- li r3,0x00 # MIN_GNT
+ li r3,0x00 # MIN_GNT
stb r3,0x2(r5)
- lis r3,0x8000 # ADDR_3F
+ lis r3,0x8000 # ADDR_3F
ori r3,r3,0x003F
stwbrx r3,0,r4
- li r3,0x00 # MAX_LAT
+ li r3,0x00 # MAX_LAT
stb r3,0x3(r5)
- lis r3,0x8000 # ADDR_40
+ lis r3,0x8000 # ADDR_40
ori r3,r3,0x0040
stwbrx r3,0,r4
- li r3,0x00 # BUSNB
+ li r3,0x00 # BUSNB
stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_41
+ lis r3,0x8000 # ADDR_41
ori r3,r3,0x0041
stwbrx r3,0,r4
- li r3,0x00 # SBUSNB
+ li r3,0x00 # SBUSNB
stb r3,0x1(r5)
- lis r3,0x8000 # ADDR_46
+ lis r3,0x8000 # ADDR_46
ori r3,r3,0x0046
stwbrx r3,0,r4
-# li r3,0xE080 # PCIARB
- li r3,-0x1F80 # PCIARB
+# li r3,0xE080 # PCIARB
+ li r3,-0x1F80 # PCIARB
li r8, 0x2
sthbrx r3,r8,r5
- lis r3,0x8000 # ADDR_70
+ lis r3,0x8000 # ADDR_70
ori r3,r3,0x0070
stwbrx r3,0,r4
- li r3,0x0000 # PMCR1
+ li r3,0x0000 # PMCR1
li r8, 0x0
sthbrx r3,r8,r5
- lis r3,0x8000 # ADDR_72
+ lis r3,0x8000 # ADDR_72
ori r3,r3,0x0072
stwbrx r3,0,r4
- li r3,0xC0 # PMCR2
+ li r3,0xC0 # PMCR2
stb r3,0x2(r5)
- lis r3,0x8000 # ADDR_73
+ lis r3,0x8000 # ADDR_73
ori r3,r3,0x0073
stwbrx r3,0,r4
- li r3,0xEF # ODCR
+ li r3,0xEF # ODCR
stb r3,0x3(r5)
- lis r3,0x8000 # ADDR_74
+ lis r3,0x8000 # ADDR_74
ori r3,r3,0x0074
stwbrx r3,0,r4
- li r3,0x7D00 # CLKDCR
+ li r3,0x7D00 # CLKDCR
li r8, 0x0
sthbrx r3,r8,r5
- lis r3,0x8000 # ADDR_76
+ lis r3,0x8000 # ADDR_76
ori r3,r3,0x0076
stwbrx r3,0,r4
- li r3,0x00 # MDCR
+ li r3,0x00 # MDCR
stb r3,0x2(r5)
lis r6,0xFCE0
ori r6,r6,0x0000 # r6 is the EUMBAR Base Address
- lis r3,0x8000 # ADDR_78
+ lis r3,0x8000 # ADDR_78
ori r3,r3,0x0078
stwbrx r3,0,r4
- lis r3,0xFCE0 # EUMBBAR
+ lis r3,0xFCE0 # EUMBBAR
ori r3,r3,0x0000
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_80
+ lis r3,0x8000 # ADDR_80
ori r3,r3,0x0080
stwbrx r3,0,r4
- lis r3,0xFFFF # MSADDR1
+ lis r3,0xFFFF # MSADDR1
ori r3,r3,0x4000
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_84
+ lis r3,0x8000 # ADDR_84
ori r3,r3,0x0084
stwbrx r3,0,r4
- lis r3,0xFFFF # MSADDR2
+ lis r3,0xFFFF # MSADDR2
ori r3,r3,0xFFFF
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_88
+ lis r3,0x8000 # ADDR_88
ori r3,r3,0x0088
stwbrx r3,0,r4
- lis r3,0x0303 # EMSADDR1
+ lis r3,0x0303 # EMSADDR1
ori r3,r3,0x0000
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_8C
+ lis r3,0x8000 # ADDR_8C
ori r3,r3,0x008C
stwbrx r3,0,r4
- lis r3,0x0303 # EMSADDR2
+ lis r3,0x0303 # EMSADDR2
ori r3,r3,0x0303
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_90
+ lis r3,0x8000 # ADDR_90
ori r3,r3,0x0090
stwbrx r3,0,r4
- lis r3,0xFFFF # EMEADDR1
+ lis r3,0xFFFF # EMEADDR1
ori r3,r3,0x7F3F
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_94
+ lis r3,0x8000 # ADDR_94
ori r3,r3,0x0094
stwbrx r3,0,r4
- lis r3,0xFFFF # EMEADDR2
+ lis r3,0xFFFF # EMEADDR2
ori r3,r3,0xFFFF
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_98
+ lis r3,0x8000 # ADDR_98
ori r3,r3,0x0098
stwbrx r3,0,r4
- lis r3,0x0303 # EXTEMEM1
+ lis r3,0x0303 # EXTEMEM1
ori r3,r3,0x0000
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_9C
+ lis r3,0x8000 # ADDR_9C
ori r3,r3,0x009C
stwbrx r3,0,r4
- lis r3,0x0303 # EXTEMEM2
+ lis r3,0x0303 # EXTEMEM2
ori r3,r3,0x0303
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_A0
+ lis r3,0x8000 # ADDR_A0
ori r3,r3,0x00A0
stwbrx r3,0,r4
- li r3,0x03 # MEMBNKEN
+ li r3,0x03 # MEMBNKEN
stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_A3
+ lis r3,0x8000 # ADDR_A3
ori r3,r3,0x00A3
stwbrx r3,0,r4
- li r3,0x00 # MEMPMODE
+ li r3,0x00 # MEMPMODE
stb r3,0x3(r5)
- lis r3,0x8000 # ADDR_B8
+ lis r3,0x8000 # ADDR_B8
ori r3,r3,0x00B8
stwbrx r3,0,r4
- li r3,0x00 # ECCCNT
+ li r3,0x00 # ECCCNT
stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_B9
+ lis r3,0x8000 # ADDR_B9
ori r3,r3,0x00B9
stwbrx r3,0,r4
- li r3,0x00 # ECCTRG
+ li r3,0x00 # ECCTRG
stb r3,0x1(r5)
- lis r3,0x8000 # ADDR_C0
+ lis r3,0x8000 # ADDR_C0
ori r3,r3,0x00C0
stwbrx r3,0,r4
- li r3,0xFF # ERRENR1
+ li r3,0xFF # ERRENR1
stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_C1
+ lis r3,0x8000 # ADDR_C1
ori r3,r3,0x00C1
stwbrx r3,0,r4
- li r3,0x00 # ERRDR1
+ li r3,0x00 # ERRDR1
stb r3,0x1(r5)
- lis r3,0x8000 # ADDR_C3
+ lis r3,0x8000 # ADDR_C3
ori r3,r3,0x00C3
stwbrx r3,0,r4
- li r3,0x50 # IPBESR
+ li r3,0x50 # IPBESR
stb r3,0x3(r5)
- lis r3,0x8000 # ADDR_C4
+ lis r3,0x8000 # ADDR_C4
ori r3,r3,0x00C4
stwbrx r3,0,r4
- li r3,0xBF # ERRENR2
+ li r3,0xBF # ERRENR2
stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_C5
+ lis r3,0x8000 # ADDR_C5
ori r3,r3,0x00C5
stwbrx r3,0,r4
- li r3,0x00 # ERRDR2
+ li r3,0x00 # ERRDR2
stb r3,0x1(r5)
- lis r3,0x8000 # ADDR_C7
+ lis r3,0x8000 # ADDR_C7
ori r3,r3,0x00C7
stwbrx r3,0,r4
- li r3,0x00 # PCIBESR
+ li r3,0x00 # PCIBESR
stb r3,0x3(r5)
- lis r3,0x8000 # ADDR_C8
+ lis r3,0x8000 # ADDR_C8
ori r3,r3,0x00C8
stwbrx r3,0,r4
- lis r3,0x0000 # BERRADDR
+ lis r3,0x0000 # BERRADDR
ori r3,r3,0xE0FE
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_E0
+ lis r3,0x8000 # ADDR_E0
ori r3,r3,0x00E0
stwbrx r3,0,r4
- li r3,0xC0 # AMBOR
+ li r3,0xC0 # AMBOR
stb r3,0x0(r5)
- lis r3,0x8000 # ADDR_F4
+ lis r3,0x8000 # ADDR_F4
ori r3,r3,0x00F4
stwbrx r3,0,r4
- lis r3,0x0000 # MCCR2
+ lis r3,0x0000 # MCCR2
ori r3,r3,0x020C
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_F8
+ lis r3,0x8000 # ADDR_F8
ori r3,r3,0x00F8
stwbrx r3,0,r4
- lis r3,0x0230 # MCCR3
+ lis r3,0x0230 # MCCR3
ori r3,r3,0x0000
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_FC
+ lis r3,0x8000 # ADDR_FC
ori r3,r3,0x00FC
stwbrx r3,0,r4
- lis r3,0x2532 # MCCR4
+ lis r3,0x2532 # MCCR4
ori r3,r3,0x2220
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_F0
+ lis r3,0x8000 # ADDR_F0
ori r3,r3,0x00F0
stwbrx r3,0,r4
- lis r3,0xFFC8 # MCCR1
+ lis r3,0xFFC8 # MCCR1
ori r3,r3,0x0000
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_A8
+ lis r3,0x8000 # ADDR_A8
ori r3,r3,0x00A8
stwbrx r3,0,r4
- lis r3,0xFF14 # PICR1
+ lis r3,0xFF14 # PICR1
ori r3,r3,0x1CC8
li r8, 0x0
stwbrx r3,r8,r5
- lis r3,0x8000 # ADDR_AC
+ lis r3,0x8000 # ADDR_AC
ori r3,r3,0x00AC
stwbrx r3,0,r4
- lis r3,0x0000 # PICR2
+ lis r3,0x0000 # PICR2
ori r3,r3,0x0000
li r8, 0x0
stwbrx r3,r8,r5
diff --git a/board/ppmc7xx/ppmc7xx.c b/board/ppmc7xx/ppmc7xx.c
index 0597c72e07..402ac5e201 100644
--- a/board/ppmc7xx/ppmc7xx.c
+++ b/board/ppmc7xx/ppmc7xx.c
@@ -1,9 +1,9 @@
/*
* ppmc7xx.c
* ---------
- *
+ *
* Main board-specific routines for Wind River PPMC 7xx/74xx board.
- *
+ *
* By Richard Danter (richard.danter@windriver.com)
* Copyright (C) 2005 Wind River Systems
*/
@@ -24,7 +24,7 @@ extern void _start_warm(void);
/*
* initdram()
- *
+ *
* This function normally initialises the (S)DRAM of the system. For this board
* the SDRAM was already initialised by board_asm_init (see init.S) so we just
* return the size of RAM.
@@ -37,12 +37,12 @@ long initdram( int board_type )
/*
* after_reloc()
- *
+ *
* This is called after U-Boot has been copied from Flash/ROM to RAM. It gives
* us an opportunity to do some additional setup before the rest of the system
* is initialised. We don't need to do anything, so we just call board_init_r()
* which should never return.
- */
+ */
void after_reloc( ulong dest_addr, gd_t* gd )
{
/* Jump to the main U-Boot board init code */
@@ -52,7 +52,7 @@ void after_reloc( ulong dest_addr, gd_t* gd )
/*
* checkboard()
- *
+ *
* We could do some board level checks here, such as working out what version
* it is, but for this board we simply display it's name (on the console).
*/
@@ -65,7 +65,7 @@ int checkboard( void )
/*
* misc_init_r
- *
+ *
* Used for other setup which needs to be done late in the bring-up phase.
*/
int misc_init_r( void )
@@ -78,27 +78,27 @@ int misc_init_r( void )
/* Enable the I-Cache */
icache_enable();
-
+
return 0;
}
/*
* do_reset()
- *
+ *
* Shell command to reset the board.
*/
void do_reset( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] )
{
printf( "Resetting...\n" );
-
+
/* Disabe and invalidate cache */
icache_disable();
dcache_disable();
/* Jump to warm start (in RAM) */
_start_warm();
-
+
/* Should never get here */
while(1);
}
generated by cgit (git 2.34.1) at 2024-12-24 00:03:51 +0000