Merge branch 'master' of git://www.denx.de/git/u-boot

1 files changed, 79 insertions, 0 deletions

diff --git a/board/quad100hd/nand.c b/board/quad100hd/nand.c
new file mode 100644
index 0000000000..a36b89dd79
--- /dev/null
+++ b/board/quad100hd/nand.c
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#if defined(CONFIG_CMD_NAND)
+#include <asm/gpio.h>
+#include <nand.h>
+
+/*
+ *	hardware specific access to control-lines
+ */
+static void quad100hd_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+	switch(cmd) {
+	case NAND_CTL_SETCLE:
+		gpio_write_bit(CFG_NAND_CLE, 1);
+		break;
+	case NAND_CTL_CLRCLE:
+		gpio_write_bit(CFG_NAND_CLE, 0);
+		break;
+
+	case NAND_CTL_SETALE:
+		gpio_write_bit(CFG_NAND_ALE, 1);
+		break;
+	case NAND_CTL_CLRALE:
+		gpio_write_bit(CFG_NAND_ALE, 0);
+		break;
+
+	case NAND_CTL_SETNCE:
+		gpio_write_bit(CFG_NAND_CE, 0);
+		break;
+	case NAND_CTL_CLRNCE:
+		gpio_write_bit(CFG_NAND_CE, 1);
+		break;
+	}
+}
+
+static int quad100hd_nand_ready(struct mtd_info *mtd)
+{
+	return gpio_read_in_bit(CFG_NAND_RDY);
+}
+
+/*
+ * Main initialization routine
+ */
+int board_nand_init(struct nand_chip *nand)
+{
+	/* Set address of hardware control function */
+	nand->hwcontrol = quad100hd_hwcontrol;
+	nand->dev_ready = quad100hd_nand_ready;
+	nand->eccmode = NAND_ECC_SOFT;
+	/* 15 us command delay time */
+	nand->chip_delay =  20;
+
+	/* Return happy */
+	return 0;
+}
+#endif /* CONFIG_CMD_NAND */