sh: sh7785lcr: Remove the board

Last change to this board was done in 2016, it uses non-DM USB
with no prospects of ever being converted to DM USB, drop it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>

1 files changed, 0 insertions, 150 deletions

diff --git a/board/renesas/sh7785lcr/selfcheck.c b/board/renesas/sh7785lcr/selfcheck.c
deleted file mode 100644
index c5f469342d..0000000000
--- a/board/renesas/sh7785lcr/selfcheck.c
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- */
-
-#include <common.h>
-#include <console.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/pci.h>
-
-#if defined(CONFIG_CPU_32BIT)
-#define NOCACHE_OFFSET		0x00000000
-#else
-#define NOCACHE_OFFSET		0xa0000000
-#endif
-#define PLD_LEDCR		(0x04000008 + NOCACHE_OFFSET)
-#define PLD_SWSR		(0x0400000a + NOCACHE_OFFSET)
-#define PLD_VERSR		(0x0400000c + NOCACHE_OFFSET)
-
-#define SM107_DEVICEID		(0x13e00060 + NOCACHE_OFFSET)
-
-static void test_pld(void)
-{
-	printf("PLD version = %04x\n", readb(PLD_VERSR));
-}
-
-static void test_sm107(void)
-{
-	printf("SM107 device ID = %04x\n", readl(SM107_DEVICEID));
-}
-
-static void test_led(void)
-{
-	printf("turn on LEDs 3, 5, 7, 9\n");
-	writeb(0x55, PLD_LEDCR);
-	mdelay(2000);
-	printf("turn on LEDs 4, 6, 8, 10\n");
-	writeb(0xaa, PLD_LEDCR);
-	mdelay(2000);
-	writeb(0x00, PLD_LEDCR);
-}
-
-static void test_dipsw(void)
-{
-	printf("Please DIPSW set = B'0101\n");
-	while (readb(PLD_SWSR) != 0x05) {
-		if (ctrlc())
-			return;
-	}
-	printf("Please DIPSW set = B'1010\n");
-	while (readb(PLD_SWSR) != 0x0A) {
-		if (ctrlc())
-			return;
-	}
-	printf("DIPSW OK\n");
-}
-
-static void test_net(void)
-{
-	unsigned long data;
-
-	writel(0x80000000, 0xfe0401c0);
-	data = readl(0xfe040220);
-	if (data == 0x816910ec)
-		printf("Ethernet OK\n");
-	else
-		printf("Ethernet NG, data = %08x\n", (unsigned int)data);
-}
-
-static void test_sata(void)
-{
-	unsigned long data;
-
-	writel(0x80000800, 0xfe0401c0);
-	data = readl(0xfe040220);
-	if (data == 0x35121095)
-		printf("SATA OK\n");
-	else
-		printf("SATA NG, data = %08x\n", (unsigned int)data);
-}
-
-static void test_pci(void)
-{
-	writel(0x80001800, 0xfe0401c0);
-	printf("PCI CN1 ID = %08x\n", readl(0xfe040220));
-
-	writel(0x80001000, 0xfe0401c0);
-	printf("PCI CN2 ID = %08x\n", readl(0xfe040220));
-}
-
-int do_hw_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	char *cmd;
-
-	if (argc != 2)
-		return cmd_usage(cmdtp);
-
-	cmd = argv[1];
-	switch (cmd[0]) {
-	case 'a':	/* all */
-		test_pld();
-		test_led();
-		test_dipsw();
-		test_sm107();
-		test_net();
-		test_sata();
-		test_pci();
-		break;
-	case 'p':	/* pld or pci */
-		if (cmd[1] == 'l')
-			test_pld();
-		else
-			test_pci();
-		break;
-	case 'l':	/* led */
-		test_led();
-		break;
-	case 'd':	/* dipsw */
-		test_dipsw();
-		break;
-	case 's':	/* sm107 or sata */
-		if (cmd[1] == 'm')
-			test_sm107();
-		else
-			test_sata();
-		break;
-	case 'n':	/* net */
-		test_net();
-		break;
-	default:
-		return cmd_usage(cmdtp);
-	}
-
-	return 0;
-}
-
-U_BOOT_CMD(
-	hwtest,	2,	1,	do_hw_test,
-	"hardware test for R0P7785LC0011RL board",
-	"\n"
-	"hwtest all   - test all hardware\n"
-	"hwtest pld   - output PLD version\n"
-	"hwtest led   - turn on LEDs\n"
-	"hwtest dipsw - test DIP switch\n"
-	"hwtest sm107 - output SM107 version\n"
-	"hwtest net   - check RTL8110 ID\n"
-	"hwtest sata  - check SiI3512 ID\n"
-	"hwtest pci   - output PCI slot device ID"
-);