board:origen: Enable device tree on Origen

This patch enables to run Origen board on device tree.

Uart, DRAM and MMC init functions are removed as their
generic replacements form the common board file are used.

The config file is modified to contain only board specific options.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Chander Kashyap <k.chander@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

1 files changed, 9 insertions, 103 deletions

diff --git a/board/samsung/origen/origen.c b/board/samsung/origen/origen.c
index 15f77cacbd..d502f02d3d 100644
--- a/board/samsung/origen/origen.c
+++ b/board/samsung/origen/origen.c
@@ -11,129 +11,35 @@
 #include <asm/arch/mmc.h>
 #include <asm/arch/periph.h>
 #include <asm/arch/pinmux.h>
+#include <usb.h>
 
 DECLARE_GLOBAL_DATA_PTR;
-struct exynos4_gpio_part1 *gpio1;
-struct exynos4_gpio_part2 *gpio2;
 
-int board_init(void)
+u32 get_board_rev(void)
 {
-	gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE;
-	gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;
-
-	gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
 	return 0;
 }
 
-static int board_uart_init(void)
+int exynos_init(void)
 {
-	int err;
-
-	err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
-	if (err) {
-		debug("UART0 not configured\n");
-		return err;
-	}
-
-	err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
-	if (err) {
-		debug("UART1 not configured\n");
-		return err;
-	}
-
-	err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
-	if (err) {
-		debug("UART2 not configured\n");
-		return err;
-	}
-
-	err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
-	if (err) {
-		debug("UART3 not configured\n");
-		return err;
-	}
-
 	return 0;
 }
 
-#ifdef CONFIG_BOARD_EARLY_INIT_F
-int board_early_init_f(void)
-{
-	int err;
-	err = board_uart_init();
-	if (err) {
-		debug("UART init failed\n");
-		return err;
-	}
-	return err;
-}
-#endif
-
-int dram_init(void)
+int board_usb_init(int index, enum usb_init_type init)
 {
-	gd->ram_size	= get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)
-			+ get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE)
-			+ get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE)
-			+ get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE);
-
 	return 0;
 }
 
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, \
-							PHYS_SDRAM_1_SIZE);
-	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-	gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2, \
-							PHYS_SDRAM_2_SIZE);
-	gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
-	gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3, \
-							PHYS_SDRAM_3_SIZE);
-	gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
-	gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4, \
-							PHYS_SDRAM_4_SIZE);
-}
-
-#ifdef CONFIG_DISPLAY_BOARDINFO
-int checkboard(void)
+#ifdef CONFIG_USB_CABLE_CHECK
+int usb_cable_connected(void)
 {
-	printf("\nBoard: ORIGEN\n");
 	return 0;
 }
 #endif
 
-#ifdef CONFIG_GENERIC_MMC
-int board_mmc_init(bd_t *bis)
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int exynos_early_init_f(void)
 {
-	int i, err;
-
-	/*
-	 * MMC2 SD card GPIO:
-	 *
-	 * GPK2[0]	SD_2_CLK(2)
-	 * GPK2[1]	SD_2_CMD(2)
-	 * GPK2[2]	SD_2_CDn
-	 * GPK2[3:6]	SD_2_DATA[0:3](2)
-	 */
-	for (i = 0; i < 7; i++) {
-		/* GPK2[0:6] special function 2 */
-		s5p_gpio_cfg_pin(&gpio2->k2, i, GPIO_FUNC(0x2));
-
-		/* GPK2[0:6] drv 4x */
-		s5p_gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
-
-		/* GPK2[0:1] pull disable */
-		if (i == 0 || i == 1) {
-			s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
-			continue;
-		}
-
-		/* GPK2[2:6] pull up */
-		s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_UP);
-	}
-
-	err = s5p_mmc_init(2, 4);
-	return err;
+	return 0;
 }
 #endif