summaryrefslogtreecommitdiff
path: root/board/sunxi
diff options
context:
space:
mode:
authorHans de Goede <hdegoede@redhat.com>2014-10-02 21:13:54 +0200
committerHans de Goede <hdegoede@redhat.com>2014-10-24 09:35:38 +0200
commite79c7c881047ca99191cc79b6d83ec64b898cd9b (patch)
tree6b8a24be2edbbc0c0c4a6580a32459983060a8cb /board/sunxi
parent2ccfac01fca3c58ee87db7bbe54c8243e3980d02 (diff)
sunxi: When we've both mmc0 and mmc2, detect from which one we're booting
sunxi SOCs can boot from both mmc0 and mmc2, detect from which one we're booting, and make that one "mmc dev 0" so that a single u-boot binary can be used for both the onboard eMMC and for external sdcards. When we're booting from mmc2, we make it dev 0 because that is where the SPL will load the tertiary payload (the actual u-boot binary in our case) from, see: common/spl/spl_mmc.c, which has dev 0 hardcoded everywhere. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
Diffstat (limited to 'board/sunxi')
-rw-r--r--board/sunxi/board.c30
1 files changed, 28 insertions, 2 deletions
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index cfe22b6138..f310e8dbff 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -12,6 +12,7 @@
*/
#include <common.h>
+#include <mmc.h>
#ifdef CONFIG_AXP152_POWER
#include <axp152.h>
#endif
@@ -104,11 +105,36 @@ static void mmc_pinmux_setup(int sdc)
int board_mmc_init(bd_t *bis)
{
+ __maybe_unused struct mmc *mmc0, *mmc1;
+ __maybe_unused char buf[512];
+
mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT);
- sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT);
+ mmc0 = sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT);
+ if (!mmc0)
+ return -1;
+
#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT_EXTRA);
- sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT_EXTRA);
+ mmc1 = sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT_EXTRA);
+ if (!mmc1)
+ return -1;
+#endif
+
+#if CONFIG_MMC_SUNXI_SLOT == 0 && CONFIG_MMC_SUNXI_SLOT_EXTRA == 2
+ /*
+ * Both mmc0 and mmc2 are bootable, figure out where we're booting
+ * from. Try mmc0 first, just like the brom does.
+ */
+ if (mmc_getcd(mmc0) && mmc_init(mmc0) == 0 &&
+ mmc0->block_dev.block_read(0, 16, 1, buf) == 1) {
+ buf[12] = 0;
+ if (strcmp(&buf[4], "eGON.BT0") == 0)
+ return 0;
+ }
+
+ /* no bootable card in mmc0, so we must be booting from mmc2, swap */
+ mmc0->block_dev.dev = 1;
+ mmc1->block_dev.dev = 0;
#endif
return 0;