ARM: Add support for jadecpu board based on MB86R01 SoC

This patch adds support for the jadecpu board using the
MB86R01 'Jade' SoC from Fujitsu.

Signed-off-by: Matthias Weisser <weisserm@arcor.de>

1 files changed, 170 insertions, 0 deletions

diff --git a/board/syteco/jadecpu/jadecpu.c b/board/syteco/jadecpu/jadecpu.c
new file mode 100644
index 0000000000..04d2f9d5a6
--- /dev/null
+++ b/board/syteco/jadecpu/jadecpu.c
@@ -0,0 +1,170 @@
+/*
+ * (c) 2010 Graf-Syteco, Matthias Weisser
+ * <weisserm@arcor.de>
+ *
+ * (C) Copyright 2007, mycable GmbH
+ * Carsten Schneider <cs@mycable.de>, Alexander Bigga <ab@mycable.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/arch/mb86r0x.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+int board_init(void)
+{
+	struct mb86r0x_ccnt * ccnt = (struct mb86r0x_ccnt *)
+					MB86R0x_CCNT_BASE;
+
+	/* We select mode 0 for group 2 and mode 1 for group 4 */
+	writel(0x00000010, &ccnt->cmux_md);
+
+	gd->flags = 0;
+	gd->bd->bi_arch_number = MACH_TYPE_JADECPU;
+	gd->bd->bi_boot_params = PHYS_SDRAM + PHYS_SDRAM_SIZE - 0x10000;
+
+	icache_enable();
+
+	return 0;
+}
+
+static void setup_display_power(uint32_t pwr_bit, char *pwm_opts,
+				unsigned long pwm_base)
+{
+	struct mb86r0x_gpio *gpio = (struct mb86r0x_gpio *)
+					MB86R0x_GPIO_BASE;
+	struct mb86r0x_pwm *pwm = (struct mb86r0x_pwm *) pwm_base;
+	const char *e;
+
+	writel(readl(&gpio->gpdr2) | pwr_bit, &gpio->gpdr2);
+
+	e = getenv(pwm_opts);
+	if (e != NULL) {
+		const char *s;
+		uint32_t freq, init;
+
+		freq = 0;
+		init = 0;
+
+		s = strchr(e, 'f');
+		if (s != NULL)
+			freq = simple_strtol(s + 2, NULL, 0);
+
+		s = strchr(e, 'i');
+		if (s != NULL)
+			init = simple_strtol(s + 2, NULL, 0);
+
+		if (freq > 0) {
+			writel(CONFIG_MB86R0x_IOCLK / 1000 / freq,
+				&pwm->bcr);
+			writel(1002, &pwm->tpr);
+			writel(1, &pwm->pr);
+			writel(init * 10 + 1, &pwm->dr);
+			writel(1, &pwm->cr);
+			writel(1, &pwm->sr);
+		}
+	}
+}
+
+int board_late_init(void)
+{
+	struct mb86r0x_gpio *gpio = (struct mb86r0x_gpio *)
+					MB86R0x_GPIO_BASE;
+	uint32_t in_word;
+
+#ifdef CONFIG_VIDEO_MB86R0xGDC
+	/* Check if we have valid display settings and turn on power if so */
+	/* Display 0 */
+	if (getenv("gs_dsp_0_param") || getenv("videomode"))
+		setup_display_power((1 << 3), "gs_dsp_0_pwm",
+					MB86R0x_PWM0_BASE);
+
+	/* The corresponding GPIO is always an output */
+	writel(readl(&gpio->gpddr2) | (1 << 3), &gpio->gpddr2);
+
+	/* Display 1 */
+	if (getenv("gs_dsp_1_param") || getenv("videomode1"))
+		setup_display_power((1 << 4), "gs_dsp_1_pwm",
+					MB86R0x_PWM1_BASE);
+
+	/* The corresponding GPIO is always an output */
+	writel(readl(&gpio->gpddr2) | (1 << 4), &gpio->gpddr2);
+#endif /* CONFIG_VIDEO_MB86R0xGDC */
+
+	/* 5V enable */
+	writel(readl(&gpio->gpdr1) & ~(1 << 5), &gpio->gpdr1);
+	writel(readl(&gpio->gpddr1) | (1 << 5), &gpio->gpddr1);
+
+	/* We have special boot options if told by GPIOs */
+	in_word = readl(&gpio->gpdr1);
+
+	if ((in_word & 0xC0) == 0xC0) {
+		setenv("stdin", "serial");
+		setenv("stdout", "serial");
+		setenv("stderr", "serial");
+		setenv("preboot", "run gs_slow_boot");
+	} else if ((in_word & 0xC0) != 0) {
+		setenv("stdout", "vga");
+		setenv("gs_bootcmd", "mw.l 0x40000000 0 1024; usb start;"
+			"fatls usb 0; fatload usb 0 0x40000000 mcq5resq.bin;"
+			"bootelf 0x40000000; bootelf 0x10080000");
+		setenv("preboot", "run gs_slow_boot");
+	} else {
+		setenv("stdin", "serial");
+		setenv("stdout", "serial");
+		setenv("stderr", "serial");
+		if (getenv("gs_devel")) {
+			setenv("preboot", "run gs_slow_boot");
+		} else {
+			setenv("gs_bootcmd", "bootelf 0x10080000");
+			setenv("preboot", "run gs_fast_boot");
+		}
+	}
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	return 0;
+}
+
+/*
+ * DRAM configuration
+ */
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_SMC911X
+	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+	return rc;
+}