summaryrefslogtreecommitdiff
path: root/board/ti/ks2_evm/README
diff options
context:
space:
mode:
authorLokesh Vutla <lokeshvutla@ti.com>2015-09-19 15:00:23 +0530
committerTom Rini <trini@konsulko.com>2015-10-22 14:22:11 -0400
commit1985abe207c4f37357b44a79dcd481602d8f83d1 (patch)
tree14992b343547660adb462d59f041eef9f79d8e6e /board/ti/ks2_evm/README
parent16d7f5b51a99139de676ce9c09f1f446c0f75c67 (diff)
ARM: keystone2: Use dtb images by default
Now that OF_CONTROL is enabled on all keystone2 platforms, build the default images with DT. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Diffstat (limited to 'board/ti/ks2_evm/README')
-rw-r--r--board/ti/ks2_evm/README14
1 files changed, 7 insertions, 7 deletions
diff --git a/board/ti/ks2_evm/README b/board/ti/ks2_evm/README
index b8d55e71fc..0fe5c3b9c3 100644
--- a/board/ti/ks2_evm/README
+++ b/board/ti/ks2_evm/README
@@ -59,8 +59,8 @@ Supported boot modes:
- UART boot
Supported image formats:
- - u-boot.bin: for loading and running u-boot.bin through Texas instruments
- code composure studio (CCS) and for UART boot.
+ - u-boot-dtb.bin: for loading and running u-boot-dtb.bin through
+ Texas Instruments code composure studio (CCS) and for UART boot.
- u-boot-spi.gph: gpimage for programming SPI NOR flash for SPI NOR boot
- MLO: gpimage for programming AEMIF NAND flash for NAND boot
@@ -69,18 +69,18 @@ Build instructions:
Examples for k2hk, for k2e and k2l just replace k2hk prefix accordingly.
Don't forget to add ARCH=arm and CROSS_COMPILE.
-To build u-boot.bin, u-boot-spi.gph, MLO:
+To build u-boot-dtb.bin, u-boot-spi.gph, MLO:
>make k2hk_evm_defconfig
>make
Load and Run U-Boot on keystone EVMs using CCS
=========================================
-Need Code Composer Studio (CCS) installed on a PC to load and run u-boot.bin
+Need Code Composer Studio (CCS) installed on a PC to load and run u-boot-dtb.bin
on EVM. See instructions at below link for installing CCS on a Windows PC.
http://processors.wiki.ti.com/index.php/MCSDK_UG_Chapter_Getting_Started#
Installing_Code_Composer_Studio
-Use u-boot.bin from the build folder for loading and running u-boot binary
+Use u-boot-dtb.bin from the build folder for loading and running u-boot binary
on EVM. Follow instructions at
K2HK http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup
K2E http://processors.wiki.ti.com/index.php/EVMK2E_Hardware_Setup
@@ -100,7 +100,7 @@ loading the u-boot binary on the target EVM. Instead do the following:-
is connected: Unknown)" at the debug window (This is created once Target
configuration is launched) and select "Connect Target".
2. Once target connect is successful, choose Tools->Load Memory option from the
- top level menu. At the Load Memory window, choose the file u-boot.bin
+ top level menu. At the Load Memory window, choose the file u-boot-dtb.bin
through "Browse" button and click "next >" button. In the next window, enter
Start address as 0xc001000, choose Type-size "32 bits" and click "Finish"
button.
@@ -167,7 +167,7 @@ Load and Run U-Boot on keystone EVMs using UART download
Open BMC and regular UART terminals.
-1. On the regular UART port start xmodem transfer of the u-boot.bin
+1. On the regular UART port start xmodem transfer of the u-boot-dtb.bin
2. Using BMC terminal set the ARM-UART bootmode and reboot the EVM
BMC> bootmode #4
MBC> reboot