diff options
author | Nishanth Menon <nm@ti.com> | 2012-03-01 14:17:38 +0000 |
---|---|---|
committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2012-05-15 08:31:22 +0200 |
commit | 3acb553439e3ee9f62f022f96f949c21811f8bdf (patch) | |
tree | 769d474b7aa9976bf1835938eafdac7d15fd090c /board/ti | |
parent | a78274b2050dcacc29561f4e35bdc91b896578cd (diff) |
OMAP4460: TPS Ensure SET1 is selected after voltage configuration
TPS SET0/SET1 register is selected by a GPIO pin on OMAP4460 platforms.
Currently we control this pin with a mux configuration as part of
boot sequence.
Current configuration results in the following voltage waveform:
|---------------| (SET1 default 1.4V)
| --------(programmed voltage)
| <- (This switch happens on mux7,pullup)
vdd_mpu(TPS) -----/ (OPP boot voltage)
--------- (programmed voltage)
vdd_core(TWL6030) -----------------------/ (OPP boot voltage)
Problem 1) |<----- Tx ------>|
timing violation for a duration Tx close to few milliseconds.
Problem 2) voltage of MPU goes beyond spec for even the highest of MPU OPP.
By using GPIO as recommended as standard procedure by TI, the sequence
changes to:
-------- (programmed voltage)
vdd_mpu(TPS) ------------/ (Opp boot voltage)
--------- (programmed voltage)
vdd_core(TWL6030) -------------/ (OPP boot voltage)
NOTE: This does not attempt to address OMAP5 - Aneesh please confirm
Reported-by: Isabelle Gros <i-gros@ti.com>
Reported-by: Jerome Angeloni <j-angeloni@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Diffstat (limited to 'board/ti')
-rw-r--r-- | board/ti/panda/panda_mux_data.h | 2 | ||||
-rw-r--r-- | board/ti/sdp4430/sdp4430_mux_data.h | 2 |
2 files changed, 2 insertions, 2 deletions
diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h index 5b66a14242..3efc22a028 100644 --- a/board/ti/panda/panda_mux_data.h +++ b/board/ti/panda/panda_mux_data.h @@ -76,7 +76,7 @@ const struct pad_conf_entry wkup_padconf_array_essential[] = { const struct pad_conf_entry wkup_padconf_array_essential_4460[] = { -{PAD1_FREF_CLK4_REQ, (PTU | M7)}, /* gpio_wk7 for TPS: safe mode + pull up */ +{PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7 for TPS: Mode 3 */ }; diff --git a/board/ti/sdp4430/sdp4430_mux_data.h b/board/ti/sdp4430/sdp4430_mux_data.h index 0a20968978..6140b999ef 100644 --- a/board/ti/sdp4430/sdp4430_mux_data.h +++ b/board/ti/sdp4430/sdp4430_mux_data.h @@ -67,7 +67,7 @@ const struct pad_conf_entry wkup_padconf_array_essential[] = { const struct pad_conf_entry wkup_padconf_array_essential_4460[] = { -{PAD1_FREF_CLK4_REQ, (PTU | M7)}, /* gpio_wk7 for TPS: safe mode + pull up */ +{PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7 for TPS: Mode 3 */ }; |