diff options
| author | Marcel Ziswiler <marcel.ziswiler@toradex.com> | 2019-04-09 17:24:16 +0200 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2019-04-25 17:03:25 +0200 |
| commit | 87b32297f5c4c64cfece377eb5ce936d8b16d0f4 (patch) | |
| tree | 7fdc696eb52972e76d91c359e086b8533eea8147 /board/toradex/colibri-imx6ull | |
| parent | 535800d33f41b25a265945d12280ef20038a6aaa (diff) | |
colibri-imx6ull: migrate usb to using driver model
Migrate USB to using driver model.
Add USBH_PEN GPIO regulator.
While at it also add alias e.g. as required for UMS.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Diffstat (limited to 'board/toradex/colibri-imx6ull')
| -rw-r--r-- | board/toradex/colibri-imx6ull/colibri-imx6ull.c | 48 |
1 files changed, 0 insertions, 48 deletions
diff --git a/board/toradex/colibri-imx6ull/colibri-imx6ull.c b/board/toradex/colibri-imx6ull/colibri-imx6ull.c index c9af44e30e..21addaf6ed 100644 --- a/board/toradex/colibri-imx6ull/colibri-imx6ull.c +++ b/board/toradex/colibri-imx6ull/colibri-imx6ull.c @@ -24,8 +24,6 @@ #include <miiphy.h> #include <mtd_node.h> #include <netdev.h> -#include <usb.h> -#include <usb/ehci-ci.h> #include "../common/tdx-common.h" #include "../common/tdx-cfg-block.h" @@ -41,8 +39,6 @@ DECLARE_GLOBAL_DATA_PTR; #define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_48ohm | PAD_CTL_PUS_22K_UP) -#define USB_CDET_GPIO IMX_GPIO_NR(7, 14) - int dram_init(void) { gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); @@ -50,10 +46,6 @@ int dram_init(void) return 0; } -static iomux_v3_cfg_t const usb_cdet_pads[] = { - MX6_PAD_SNVS_TAMPER2__GPIO5_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - #ifdef CONFIG_NAND_MXS static void setup_gpmi_nand(void) { @@ -163,11 +155,6 @@ int board_init(void) setup_lcd(); #endif -#ifdef CONFIG_USB_EHCI_MX6 - imx_iomux_v3_setup_multiple_pads(usb_cdet_pads, ARRAY_SIZE(usb_cdet_pads)); - gpio_request(USB_CDET_GPIO, "usb-cdet-gpio"); -#endif - return 0; } @@ -241,41 +228,6 @@ int ft_board_setup(void *blob, bd_t *bd) } #endif -#ifdef CONFIG_USB_EHCI_MX6 -static iomux_v3_cfg_t const usb_otg2_pads[] = { - MX6_PAD_GPIO1_IO02__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -int board_ehci_hcd_init(int port) -{ - switch (port) { - case 0: - break; - case 1: - imx_iomux_v3_setup_multiple_pads(usb_otg2_pads, - ARRAY_SIZE(usb_otg2_pads)); - break; - default: - return -EINVAL; - } - return 0; -} - -int board_usb_phy_mode(int port) -{ - switch (port) { - case 0: - if (gpio_get_value(USB_CDET_GPIO)) - return USB_INIT_DEVICE; - else - return USB_INIT_HOST; - case 1: - default: - return USB_INIT_HOST; - } -} -#endif - static struct mxc_serial_platdata mxc_serial_plat = { .reg = (struct mxc_uart *)UART1_BASE, .use_dte = 1, |