summaryrefslogtreecommitdiff
path: root/board/xes
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2011-04-05 12:24:20 +0200
committerWolfgang Denk <wd@denx.de>2011-04-05 12:24:20 +0200
commit4db2fa7f9446d0f2fe8db3d62184b1212fe22707 (patch)
treebc62cbfc14296551caebda626db7a90fef9ae844 /board/xes
parent75df0d594990875419121c6f8687472ac9f4ae7a (diff)
parent7d3053fbf16caad4745f42f7ae3e38e9d3e964b5 (diff)
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Conflicts: drivers/usb/host/ehci-pci.c Signed-off-by: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'board/xes')
-rw-r--r--board/xes/xpedite517x/ddr.c32
-rw-r--r--board/xes/xpedite517x/xpedite517x.c9
-rw-r--r--board/xes/xpedite520x/ddr.c22
-rw-r--r--board/xes/xpedite537x/ddr.c22
-rw-r--r--board/xes/xpedite537x/xpedite537x.c9
-rw-r--r--board/xes/xpedite550x/ddr.c20
-rw-r--r--board/xes/xpedite550x/xpedite550x.c9
7 files changed, 5 insertions, 118 deletions
diff --git a/board/xes/xpedite517x/ddr.c b/board/xes/xpedite517x/ddr.c
index 1d57d0909a..3a6e297f45 100644
--- a/board/xes/xpedite517x/ddr.c
+++ b/board/xes/xpedite517x/ddr.c
@@ -26,40 +26,12 @@
#include <asm/fsl_ddr_sdram.h>
#include <asm/fsl_ddr_dimm_params.h>
-static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
+void get_spd(ddr2_spd_eeprom_t *spd, u8 i2c_address)
{
i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd,
sizeof(ddr2_spd_eeprom_t));
}
-unsigned int fsl_ddr_get_mem_data_rate(void)
-{
- return get_bus_freq(0);
-}
-
-void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
- unsigned int ctrl_num)
-{
- unsigned int i;
- unsigned int i2c_address = 0;
-
- for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
- if (ctrl_num == 0) {
- i2c_address = SPD_EEPROM_ADDRESS1;
-#ifdef SPD_EEPROM_ADDRESS2
- } else if (ctrl_num == 1) {
- i2c_address = SPD_EEPROM_ADDRESS2;
-#endif
- } else {
- /* An inalid ctrl number was give, use default SPD */
- printf("ERROR: invalid DDR ctrl: %d\n", ctrl_num);
- i2c_address = SPD_EEPROM_ADDRESS1;
- }
-
- get_spd(&(ctrl_dimms_spd[i]), i2c_address);
- }
-}
-
/*
* There are four board-specific SDRAM timing parameters which must be
* calculated based on the particular PCB artwork. These are:
@@ -144,7 +116,7 @@ void fsl_ddr_board_options(memctl_options_t *popts,
unsigned int datarate;
get_sys_info(&sysinfo);
- datarate = fsl_ddr_get_mem_data_rate() / 1000000;
+ datarate = get_ddr_freq(0) / 1000000;
for (i = 0; i < ARRAY_SIZE(bopts_ctrl[ctrl_num]); i++) {
if ((bopts[i].datarate_mhz_low <= datarate) &&
diff --git a/board/xes/xpedite517x/xpedite517x.c b/board/xes/xpedite517x/xpedite517x.c
index 61443aab84..179b238060 100644
--- a/board/xes/xpedite517x/xpedite517x.c
+++ b/board/xes/xpedite517x/xpedite517x.c
@@ -93,12 +93,3 @@ void ft_board_setup(void *blob, bd_t *bd)
ft_cpu_setup(blob, bd);
}
#endif
-
-#ifdef CONFIG_MP
-extern void cpu_mp_lmb_reserve(struct lmb *lmb);
-
-void board_lmb_reserve(struct lmb *lmb)
-{
- cpu_mp_lmb_reserve(lmb);
-}
-#endif
diff --git a/board/xes/xpedite520x/ddr.c b/board/xes/xpedite520x/ddr.c
index c5616d546b..3671cb8af9 100644
--- a/board/xes/xpedite520x/ddr.c
+++ b/board/xes/xpedite520x/ddr.c
@@ -12,8 +12,7 @@
#include <asm/fsl_ddr_sdram.h>
#include <asm/fsl_ddr_dimm_params.h>
-static void
-get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
+void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
{
i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t));
@@ -27,25 +26,6 @@ get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
}
}
-unsigned int fsl_ddr_get_mem_data_rate(void)
-{
- return get_ddr_freq(0);
-}
-
-void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
- unsigned int ctrl_num)
-{
- unsigned int i;
-
- if (ctrl_num) {
- printf("%s: invalid ctrl_num = %d\n", __func__, ctrl_num);
- return;
- }
-
- for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++)
- get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS);
-}
-
void fsl_ddr_board_options(memctl_options_t *popts,
dimm_params_t *pdimm,
unsigned int ctrl_num)
diff --git a/board/xes/xpedite537x/ddr.c b/board/xes/xpedite537x/ddr.c
index 4d3f255d70..d0662b0c57 100644
--- a/board/xes/xpedite537x/ddr.c
+++ b/board/xes/xpedite537x/ddr.c
@@ -27,32 +27,12 @@
#include <asm/fsl_ddr_sdram.h>
#include <asm/fsl_ddr_dimm_params.h>
-static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
+void get_spd(ddr2_spd_eeprom_t *spd, u8 i2c_address)
{
i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd,
sizeof(ddr2_spd_eeprom_t));
}
-unsigned int fsl_ddr_get_mem_data_rate(void)
-{
- return get_ddr_freq(0);
-}
-
-void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
- unsigned int ctrl_num)
-{
- unsigned int i;
- unsigned int i2c_address = 0;
-
- for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
- if (ctrl_num == 0)
- i2c_address = SPD_EEPROM_ADDRESS1;
- if (ctrl_num == 1)
- i2c_address = SPD_EEPROM_ADDRESS2;
- get_spd(&(ctrl_dimms_spd[i]), i2c_address);
- }
-}
-
/*
* There are four board-specific SDRAM timing parameters which must be
* calculated based on the particular PCB artwork. These are:
diff --git a/board/xes/xpedite537x/xpedite537x.c b/board/xes/xpedite537x/xpedite537x.c
index d074495f96..9d9afaefbc 100644
--- a/board/xes/xpedite537x/xpedite537x.c
+++ b/board/xes/xpedite537x/xpedite537x.c
@@ -96,12 +96,3 @@ void ft_board_setup(void *blob, bd_t *bd)
ft_cpu_setup(blob, bd);
}
#endif
-
-#ifdef CONFIG_MP
-extern void cpu_mp_lmb_reserve(struct lmb *lmb);
-
-void board_lmb_reserve(struct lmb *lmb)
-{
- cpu_mp_lmb_reserve(lmb);
-}
-#endif
diff --git a/board/xes/xpedite550x/ddr.c b/board/xes/xpedite550x/ddr.c
index 38a459715f..3b6e08bfcd 100644
--- a/board/xes/xpedite550x/ddr.c
+++ b/board/xes/xpedite550x/ddr.c
@@ -27,30 +27,12 @@
#include <asm/fsl_ddr_sdram.h>
#include <asm/fsl_ddr_dimm_params.h>
-static void get_spd(ddr3_spd_eeprom_t *spd, unsigned char i2c_address)
+void get_spd(ddr3_spd_eeprom_t *spd, u8 i2c_address)
{
i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd,
sizeof(ddr3_spd_eeprom_t));
}
-void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd,
- unsigned int ctrl_num)
-{
- unsigned int i;
- unsigned int i2c_address = 0;
-
- for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
- if (ctrl_num == 0 && i == 0)
- i2c_address = SPD_EEPROM_ADDRESS1;
- get_spd(&(ctrl_dimms_spd[i]), i2c_address);
- }
-}
-
-unsigned int fsl_ddr_get_mem_data_rate(void)
-{
- return get_ddr_freq(0);
-}
-
/*
* There are traditionally three board-specific SDRAM timing parameters
* which must be calculated based on the particular PCB artwork. These are:
diff --git a/board/xes/xpedite550x/xpedite550x.c b/board/xes/xpedite550x/xpedite550x.c
index 6f91c83b6c..24b2b0ea06 100644
--- a/board/xes/xpedite550x/xpedite550x.c
+++ b/board/xes/xpedite550x/xpedite550x.c
@@ -96,12 +96,3 @@ void ft_board_setup(void *blob, bd_t *bd)
ft_cpu_setup(blob, bd);
}
#endif
-
-#ifdef CONFIG_MP
-extern void cpu_mp_lmb_reserve(struct lmb *lmb);
-
-void board_lmb_reserve(struct lmb *lmb)
-{
- cpu_mp_lmb_reserve(lmb);
-}
-#endif