* Patch by Peter Ryser, 20 Feb 2004:

  Add support for the Xilinx ML300 platform

* Patch by Stephan Linz, 17 Feb 2004:
  Fix watchdog support for NIOS

* Patch by Josh Fryman, 16 Feb 2004:
  Fix byte-swapping for cfi_flash.c for different bus widths

* Patch by Jon Diekema, 14 Jeb 2004:
  Remove duplicate "FPGA Support" notes from the README file

1 files changed, 306 insertions, 0 deletions

diff --git a/board/xilinx/common/xpacket_fifo_v1_00_b.h b/board/xilinx/common/xpacket_fifo_v1_00_b.h
new file mode 100644
index 0000000000..1cda0e8cc4
--- /dev/null
+++ b/board/xilinx/common/xpacket_fifo_v1_00_b.h
@@ -0,0 +1,306 @@
+/******************************************************************************
+*
+*     Author: Xilinx, Inc.
+*
+*
+*     This program is free software; you can redistribute it and/or modify it
+*     under the terms of the GNU General Public License as published by the
+*     Free Software Foundation; either version 2 of the License, or (at your
+*     option) any later version.
+*
+*
+*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
+*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
+*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
+*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
+*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
+*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
+*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
+*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
+*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
+*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
+*     FITNESS FOR A PARTICULAR PURPOSE.
+*
+*
+*     Xilinx hardware products are not intended for use in life support
+*     appliances, devices, or systems. Use in such applications is
+*     expressly prohibited.
+*
+*
+*     (c) Copyright 2002-2004 Xilinx Inc.
+*     All rights reserved.
+*
+*
+*     You should have received a copy of the GNU General Public License along
+*     with this program; if not, write to the Free Software Foundation, Inc.,
+*     675 Mass Ave, Cambridge, MA 02139, USA.
+*
+******************************************************************************/
+/*****************************************************************************/
+/*
+*
+* @file xpacket_fifo_v1_00_b.h
+*
+* This component is a common component because it's primary purpose is to
+* prevent code duplication in drivers. A driver which must handle a packet
+* FIFO uses this component rather than directly manipulating a packet FIFO.
+*
+* A FIFO is a device which has dual port memory such that one user may be
+* inserting data into the FIFO while another is consuming data from the FIFO.
+* A packet FIFO is designed for use with packet protocols such as Ethernet and
+* ATM.  It is typically only used with devices when DMA and/or Scatter Gather
+* is used.  It differs from a nonpacket FIFO in that it does not provide any
+* interrupts for thresholds of the FIFO such that it is less useful without
+* DMA.
+*
+* @note
+*
+* This component has the capability to generate an interrupt when an error
+* condition occurs.  It is the user's responsibility to provide the interrupt
+* processing to handle the interrupt. This component provides the ability to
+* determine if that interrupt is active, a deadlock condition, and the ability
+* to reset the FIFO to clear the condition. In this condition, the device which
+* is using the FIFO should also be reset to prevent other problems. This error
+* condition could occur as a normal part of operation if the size of the FIFO
+* is not setup correctly.  See the hardware IP specification for more details.
+*
+* <pre>
+* MODIFICATION HISTORY:
+*
+* Ver   Who  Date     Changes
+* ----- ---- -------- -----------------------------------------------
+* 1.00b rpm 03/26/02  First release
+* </pre>
+*
+*****************************************************************************/
+#ifndef XPACKET_FIFO_H		/* prevent circular inclusions */
+#define XPACKET_FIFO_H		/* by using protection macros */
+
+/***************************** Include Files *********************************/
+
+#include "xbasic_types.h"
+#include "xstatus.h"
+
+/************************** Constant Definitions *****************************/
+
+/*
+ * These constants specify the FIFO type and are mutually exclusive
+ */
+#define XPF_READ_FIFO_TYPE      0	/* a read FIFO */
+#define XPF_WRITE_FIFO_TYPE     1	/* a write FIFO */
+
+/*
+ * These constants define the offsets to each of the registers from the
+ * register base address, each of the constants are a number of bytes
+ */
+#define XPF_RESET_REG_OFFSET            0UL
+#define XPF_MODULE_INFO_REG_OFFSET      0UL
+#define XPF_COUNT_STATUS_REG_OFFSET     4UL
+
+/*
+ * This constant is used with the Reset Register
+ */
+#define XPF_RESET_FIFO_MASK             0x0000000A
+
+/*
+ * These constants are used with the Occupancy/Vacancy Count Register. This
+ * register also contains FIFO status
+ */
+#define XPF_COUNT_MASK                  0x0000FFFF
+#define XPF_DEADLOCK_MASK               0x20000000
+#define XPF_ALMOST_EMPTY_FULL_MASK      0x40000000
+#define XPF_EMPTY_FULL_MASK             0x80000000
+
+/**************************** Type Definitions *******************************/
+
+/*
+ * The XPacketFifo driver instance data. The driver is required to allocate a
+ * variable of this type for every packet FIFO in the device.
+ */
+typedef struct {
+	u32 RegBaseAddress;	/* Base address of registers */
+	u32 IsReady;		/* Device is initialized and ready */
+	u32 DataBaseAddress;	/* Base address of data for FIFOs */
+} XPacketFifoV100b;
+
+/***************** Macros (Inline Functions) Definitions *********************/
+
+/*****************************************************************************/
+/*
+*
+* Reset the specified packet FIFO.  Resetting a FIFO will cause any data
+* contained in the FIFO to be lost.
+*
+* @param InstancePtr contains a pointer to the FIFO to operate on.
+*
+* @return
+*
+* None.
+*
+* @note
+*
+* Signature: void XPF_V100B_RESET(XPacketFifoV100b *InstancePtr)
+*
+******************************************************************************/
+#define XPF_V100B_RESET(InstancePtr) \
+    XIo_Out32((InstancePtr)->RegBaseAddress + XPF_RESET_REG_OFFSET, XPF_RESET_FIFO_MASK);
+
+/*****************************************************************************/
+/*
+*
+* Get the occupancy count for a read packet FIFO and the vacancy count for a
+* write packet FIFO. These counts indicate the number of 32-bit words
+* contained (occupancy) in the FIFO or the number of 32-bit words available
+* to write (vacancy) in the FIFO.
+*
+* @param InstancePtr contains a pointer to the FIFO to operate on.
+*
+* @return
+*
+* The occupancy or vacancy count for the specified packet FIFO.
+*
+* @note
+*
+* Signature: u32 XPF_V100B_GET_COUNT(XPacketFifoV100b *InstancePtr)
+*
+******************************************************************************/
+#define XPF_V100B_GET_COUNT(InstancePtr) \
+    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
+    XPF_COUNT_MASK)
+
+/*****************************************************************************/
+/*
+*
+* Determine if the specified packet FIFO is almost empty. Almost empty is
+* defined for a read FIFO when there is only one data word in the FIFO.
+*
+* @param InstancePtr contains a pointer to the FIFO to operate on.
+*
+* @return
+*
+* TRUE if the packet FIFO is almost empty, FALSE otherwise.
+*
+* @note
+*
+* Signature: u32 XPF_V100B_IS_ALMOST_EMPTY(XPacketFifoV100b *InstancePtr)
+*
+******************************************************************************/
+#define XPF_V100B_IS_ALMOST_EMPTY(InstancePtr) \
+    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
+    XPF_ALMOST_EMPTY_FULL_MASK)
+
+/*****************************************************************************/
+/*
+*
+* Determine if the specified packet FIFO is almost full. Almost full is
+* defined for a write FIFO when there is only one available data word in the
+* FIFO.
+*
+* @param InstancePtr contains a pointer to the FIFO to operate on.
+*
+* @return
+*
+* TRUE if the packet FIFO is almost full, FALSE otherwise.
+*
+* @note
+*
+* Signature: u32 XPF_V100B_IS_ALMOST_FULL(XPacketFifoV100b *InstancePtr)
+*
+******************************************************************************/
+#define XPF_V100B_IS_ALMOST_FULL(InstancePtr) \
+    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
+    XPF_ALMOST_EMPTY_FULL_MASK)
+
+/*****************************************************************************/
+/*
+*
+* Determine if the specified packet FIFO is empty. This applies only to a
+* read FIFO.
+*
+* @param InstancePtr contains a pointer to the FIFO to operate on.
+*
+* @return
+*
+* TRUE if the packet FIFO is empty, FALSE otherwise.
+*
+* @note
+*
+* Signature: u32 XPF_V100B_IS_EMPTY(XPacketFifoV100b *InstancePtr)
+*
+******************************************************************************/
+#define XPF_V100B_IS_EMPTY(InstancePtr) \
+    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
+    XPF_EMPTY_FULL_MASK)
+
+/*****************************************************************************/
+/*
+*
+* Determine if the specified packet FIFO is full. This applies only to a
+* write FIFO.
+*
+* @param InstancePtr contains a pointer to the FIFO to operate on.
+*
+* @return
+*
+* TRUE if the packet FIFO is full, FALSE otherwise.
+*
+* @note
+*
+* Signature: u32 XPF_V100B_IS_FULL(XPacketFifoV100b *InstancePtr)
+*
+******************************************************************************/
+#define XPF_V100B_IS_FULL(InstancePtr) \
+    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
+    XPF_EMPTY_FULL_MASK)
+
+/*****************************************************************************/
+/*
+*
+* Determine if the specified packet FIFO is deadlocked.  This condition occurs
+* when the FIFO is full and empty at the same time and is caused by a packet
+* being written to the FIFO which exceeds the total data capacity of the FIFO.
+* It occurs because of the mark/restore features of the packet FIFO which allow
+* retransmission of a packet. The software should reset the FIFO and any devices
+* using the FIFO when this condition occurs.
+*
+* @param InstancePtr contains a pointer to the FIFO to operate on.
+*
+* @return
+*
+* TRUE if the packet FIFO is deadlocked, FALSE otherwise.
+*
+* @note
+*
+* This component has the capability to generate an interrupt when an error
+* condition occurs.  It is the user's responsibility to provide the interrupt
+* processing to handle the interrupt. This function provides the ability to
+* determine if a deadlock condition, and the ability to reset the FIFO to
+* clear the condition.
+*
+* In this condition, the device which is using the FIFO should also be reset
+* to prevent other problems. This error condition could occur as a normal part
+* of operation if the size of the FIFO is not setup correctly.
+*
+* Signature: u32 XPF_V100B_IS_DEADLOCKED(XPacketFifoV100b *InstancePtr)
+*
+******************************************************************************/
+#define XPF_V100B_IS_DEADLOCKED(InstancePtr) \
+    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
+    XPF_DEADLOCK_MASK)
+
+/************************** Function Prototypes ******************************/
+
+/* Standard functions */
+
+XStatus XPacketFifoV100b_Initialize(XPacketFifoV100b * InstancePtr,
+				    u32 RegBaseAddress, u32 DataBaseAddress);
+XStatus XPacketFifoV100b_SelfTest(XPacketFifoV100b * InstancePtr, u32 FifoType);
+
+/* Data functions */
+
+XStatus XPacketFifoV100b_Read(XPacketFifoV100b * InstancePtr,
+			      u8 * ReadBufferPtr, u32 ByteCount);
+XStatus XPacketFifoV100b_Write(XPacketFifoV100b * InstancePtr,
+			       u8 * WriteBufferPtr, u32 ByteCount);
+
+#endif				/* end of protection macro */