Merge remote-tracking branch 'u-boot-ti/master' into m

3 files changed, 157 insertions, 46 deletions

diff --git a/board/technexion/twister/twister.c b/board/technexion/twister/twister.c
index c2b10ac1ea..7429e934fd 100644
--- a/board/technexion/twister/twister.c
+++ b/board/technexion/twister/twister.c
@@ -100,8 +100,18 @@ int board_init(void)
 
 int misc_init_r(void)
 {
+	char *eth_addr;
+
 	dieid_num_r();
 
+	eth_addr = getenv("ethaddr");
+	if (eth_addr)
+		return 0;
+
+#ifndef CONFIG_SPL_BUILD
+	TAM3517_READ_MAC_FROM_EEPROM;
+#endif
+
 	return 0;
 }
 
diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
index 9fbaedd792..b8ad4471f5 100644
--- a/board/teejet/mt_ventoux/mt_ventoux.c
+++ b/board/teejet/mt_ventoux/mt_ventoux.c
@@ -21,13 +21,17 @@
 
 #include <common.h>
 #include <netdev.h>
+#include <malloc.h>
 #include <fpga.h>
+#include <video_fb.h>
 #include <asm/io.h>
 #include <asm/arch/mem.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/omap_gpio.h>
 #include <asm/arch/mmc_host_def.h>
+#include <asm/arch/dss.h>
+#include <asm/arch/clocks.h>
 #include <i2c.h>
 #include <spartan3.h>
 #include <asm/gpio.h>
@@ -39,6 +43,9 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#define BUZZER		140
+#define SPEAKER		141
+
 #ifndef CONFIG_FPGA
 #error "The Teejet mt_ventoux must have CONFIG_FPGA enabled"
 #endif
@@ -50,6 +57,42 @@ DECLARE_GLOBAL_DATA_PTR;
 #define FPGA_INIT	119
 #define FPGA_DONE	154
 
+#define LCD_PWR		138
+#define LCD_PON_PIN	139
+
+#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
+static struct {
+	u32 xres;
+	u32 yres;
+} panel_resolution[] = {
+	{ 480, 272 },
+	{ 800, 480 }
+};
+
+static struct panel_config lcd_cfg[] = {
+	{
+	.timing_h       = PANEL_TIMING_H(4, 8, 41),
+	.timing_v       = PANEL_TIMING_V(2, 4, 10),
+	.pol_freq       = 0x00000000, /* Pol Freq */
+	.divisor        = 0x0001000d, /* 33Mhz Pixel Clock */
+	.panel_type     = 0x01, /* TFT */
+	.data_lines     = 0x03, /* 24 Bit RGB */
+	.load_mode      = 0x02, /* Frame Mode */
+	.panel_color	= 0,
+	},
+	{
+	.timing_h       = PANEL_TIMING_H(20, 192, 4),
+	.timing_v       = PANEL_TIMING_V(2, 20, 10),
+	.pol_freq       = 0x00004000, /* Pol Freq */
+	.divisor        = 0x0001000E, /* 36Mhz Pixel Clock */
+	.panel_type     = 0x01, /* TFT */
+	.data_lines     = 0x03, /* 24 Bit RGB */
+	.load_mode      = 0x02, /* Frame Mode */
+	.panel_color	= 0,
+	}
+};
+#endif
+
 /* Timing definitions for FPGA */
 static const u32 gpmc_fpga[] = {
 	FPGA_GPMC_CONFIG1,
@@ -193,6 +236,33 @@ int board_init(void)
 
 	mt_ventoux_init_fpga();
 
+	/* GPIO_140: speaker #mute */
+	MUX_VAL(CP(MCBSP3_DX),		(IEN | PTU | EN | M4))
+	/* GPIO_141: Buzz Hi */
+	MUX_VAL(CP(MCBSP3_DR),		(IEN  | PTU | EN | M4))
+
+	/* Turning off the buzzer */
+	gpio_request(BUZZER, "BUZZER_MUTE");
+	gpio_request(SPEAKER, "SPEAKER");
+	gpio_direction_output(BUZZER, 0);
+	gpio_direction_output(SPEAKER, 0);
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	char *eth_addr;
+
+	dieid_num_r();
+
+	eth_addr = getenv("ethaddr");
+	if (eth_addr)
+		return 0;
+
+#ifndef CONFIG_SPL_BUILD
+	TAM3517_READ_MAC_FROM_EEPROM;
+#endif
 	return 0;
 }
 
@@ -224,3 +294,46 @@ int board_mmc_init(bd_t *bis)
 	return omap_mmc_init(0, 0, 0);
 }
 #endif
+
+#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
+int board_video_init(void)
+{
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+	struct panel_config *panel = &lcd_cfg[0];
+	char *s;
+	u32 index = 0;
+
+	void *fb;
+
+	fb = (void *)0x88000000;
+
+	s = getenv("panel");
+	if (s) {
+		index = simple_strtoul(s, NULL, 10);
+		if (index < ARRAY_SIZE(lcd_cfg))
+			panel = &lcd_cfg[index];
+		else
+			return 0;
+	}
+
+	panel->frame_buffer = fb;
+	printf("Panel: %dx%d\n", panel_resolution[index].xres,
+		panel_resolution[index].yres);
+	panel->lcd_size = (panel_resolution[index].yres - 1) << 16 |
+		(panel_resolution[index].xres - 1);
+
+	gpio_request(LCD_PWR, "LCD Power");
+	gpio_request(LCD_PON_PIN, "LCD Pon");
+	gpio_direction_output(LCD_PWR, 0);
+	gpio_direction_output(LCD_PON_PIN, 1);
+
+
+	setbits_le32(&prcm_base->fclken_dss, FCK_DSS_ON);
+	setbits_le32(&prcm_base->iclken_dss, ICK_DSS_ON);
+
+	omap3_dss_panel_config(panel);
+	omap3_dss_enable();
+
+	return 0;
+}
+#endif
diff --git a/board/teejet/mt_ventoux/mt_ventoux.h b/board/teejet/mt_ventoux/mt_ventoux.h
index 9b2e43ec6f..1cd7ec2ab2 100644
--- a/board/teejet/mt_ventoux/mt_ventoux.h
+++ b/board/teejet/mt_ventoux/mt_ventoux.h
@@ -142,7 +142,8 @@ const omap3_sysinfo sysinfo = {
 			/*GPIO_62: FPGA_RESET */ \
 	MUX_VAL(CP(GPMC_WAIT0),		(IEN  | PTU | EN  | M4)) \
 	MUX_VAL(CP(GPMC_WAIT1),		(IEN  | PTU | EN  | M4)) \
-	MUX_VAL(CP(GPMC_WAIT2),		(IEN  | PTU | EN  | M4)) /*GPIO_64*/ \
+	MUX_VAL(CP(GPMC_WAIT2),		(IEN  | PTU | EN  | M4)) \
+			/* GPIO_64*/ \
 	MUX_VAL(CP(GPMC_WAIT3),		(IEN  | PTU | EN  | M4)) \
 	/* DSS */\
 	MUX_VAL(CP(DSS_PCLK),		(IDIS | PTD | DIS | M0)) \
@@ -174,26 +175,6 @@ const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M0)) \
 	/* CAMERA */\
-	MUX_VAL(CP(CAM_HS),		(IEN  | PTU | EN  | M0)) \
-	MUX_VAL(CP(CAM_VS),		(IEN  | PTU | EN  | M0)) \
-	MUX_VAL(CP(CAM_XCLKA),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_PCLK),		(IEN  | PTU | EN  | M0)) \
-	MUX_VAL(CP(CAM_FLD),		(IDIS | PTD | DIS | M4)) /*GPIO_98*/\
-	MUX_VAL(CP(CAM_D0),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_D1),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_D2),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_D3),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_D4),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_D5),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_D6),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_D7),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_D8),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_D9),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_D10),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_D11),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_XCLKB),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_WEN),		(IEN  | PTD | DIS | M4)) /*GPIO_167*/\
-	MUX_VAL(CP(CAM_STROBE),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M0)) \
 	MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M0)) \
 	MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | DIS | M0)) \
@@ -209,6 +190,7 @@ const omap3_sysinfo sysinfo = {
 			/* GPIO_126: CardDetect */\
 	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M4)) \
 	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M4)) \
+			/*GPIO_128 */ \
 	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M4)) \
 	\
 	MUX_VAL(CP(MMC2_CLK),		(IEN  | PTU | EN | M0)) /*MMC2_CLK*/\
@@ -221,7 +203,7 @@ const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(MMC2_DAT5),		(IDIS  | PTU | EN  | M4)) \
 	MUX_VAL(CP(MMC2_DAT6),		(IDIS  | PTU | EN  | M4)) \
 			/* GPIO_138: LCD_ENVD */\
-	MUX_VAL(CP(MMC2_DAT7),		(IDIS  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC2_DAT7),		(IDIS  | PTD | EN  | M4)) \
 			/* GPIO_139: LCD_PON */\
 	/* McBSP */\
 	MUX_VAL(CP(MCBSP_CLKS),		(IEN  | PTU | DIS | M0)) \
@@ -241,16 +223,12 @@ const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(MCBSP2_DX),		(IEN | PTD | EN | M4)) \
 			/* GPIO_119: FPGA_INIT */ \
 	\
-	MUX_VAL(CP(MCBSP3_DX),		(IEN | PTU | EN | M4)) \
-			/* GPIO_140: speaker #mute */\
-	MUX_VAL(CP(MCBSP3_DR),		(IEN  | PTU | EN | M4)) \
-			/* GPIO_141: Buzz Hi */\
 	MUX_VAL(CP(MCBSP3_CLKX),	(IEN  | PTU | EN | M4)) \
 	MUX_VAL(CP(MCBSP3_FSX),		(IEN  | PTU | EN | M4)) \
 	\
 	MUX_VAL(CP(MCBSP4_CLKX),	(IEN | PTD | DIS | M4)) \
 			/*GPIO_152: Ignition Sense */ \
-	MUX_VAL(CP(MCBSP4_DR),		(IDIS | PTD | DIS | M4)) \
+	MUX_VAL(CP(MCBSP4_DR),		(IEN | PTD | DIS | M4)) \
 			/*GPIO_153: Power Button Sense */ \
 	MUX_VAL(CP(MCBSP4_DX),		(IEN | PTU | DIS | M4)) \
 			/* GPIO_154: FPGA_DONE */ \
@@ -264,10 +242,14 @@ const omap3_sysinfo sysinfo = {
 			/* GPIO_150: USB status 1 */\
 	\
 	MUX_VAL(CP(UART1_RX),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M0)) \
-	MUX_VAL(CP(UART2_RTS),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(UART2_RX),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M2)) \
+			/* gpt9_pwm */\
+	MUX_VAL(CP(UART2_RTS),		(IEN | PTD | DIS | M2)) \
+			/* gpt10_pwm */\
+	MUX_VAL(CP(UART2_TX),		(IEN | PTD | DIS | M2)) \
+			/* gpt8_pwm */\
+	MUX_VAL(CP(UART2_RX),		(IEN  | PTD | DIS | M2)) \
+			/* gpt11_pwm */\
 	\
 	MUX_VAL(CP(UART3_CTS_RCTX),	(IDIS  | PTD | DIS | M4)) \
 			/*GPIO_163 : TS_PENIRQ*/ \
@@ -299,22 +281,24 @@ const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(MCSPI2_CS0),		(IEN  | PTD | EN  | M4)) \
 	MUX_VAL(CP(MCSPI2_CS1),		(IEN  | PTD | EN  | M0)) \
 	/* CCDC */\
-	MUX_VAL(CP(CCDC_PCLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_PCLK),		(IEN  | PTU | EN  | M4)) \
+			/* GPIO94 */\
 	MUX_VAL(CP(CCDC_FIELD),		(IEN  | PTD | DIS | M4)) \
 			/* GPIO95: #Enable Output */\
-	MUX_VAL(CP(CCDC_HD),		(IEN  | PTU | EN  | M0)) \
-	MUX_VAL(CP(CCDC_VD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_HD),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(CCDC_VD),		(IEN  | PTU | EN  | M4)) \
 	MUX_VAL(CP(CCDC_WEN),		(IEN  | PTD | DIS | M4)) \
 			/* GPIO 99: #SOM_PWR_OFF */\
-	MUX_VAL(CP(CCDC_DATA0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA0),		(IEN  | PTD | DIS | M4)) \
 	MUX_VAL(CP(CCDC_DATA1),		(IEN  | PTD | DIS | M4)) \
 			/* GPIO_100: #power out */\
-	MUX_VAL(CP(CCDC_DATA2),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CCDC_DATA3),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CCDC_DATA4),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CCDC_DATA5),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CCDC_DATA6),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CCDC_DATA7),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA2),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(CCDC_DATA3),		(IEN  | PTD | DIS | M4)) \
+			/* GPIO_102 */\
+	MUX_VAL(CP(CCDC_DATA4),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(CCDC_DATA5),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(CCDC_DATA6),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(CCDC_DATA7),		(IEN  | PTD | DIS | M4)) \
 	/* RMII */\
 	MUX_VAL(CP(RMII_MDIO_DATA),	(IEN  |  M0)) \
 	MUX_VAL(CP(RMII_MDIO_CLK),	(M0)) \
@@ -363,7 +347,8 @@ const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(SYS_BOOT8),		(IEN  | PTD | EN  | M0)) \
 	\
 	MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKOUT1),	(IDIS | PTD | DIS | M4)) \
+			/* gpio_10 */\
 	MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M0)) \
 	/* JTAG */\
 	MUX_VAL(CP(JTAG_nTRST),		(IEN  | PTD | DIS | M0)) \
@@ -387,12 +372,15 @@ const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(ETK_D7_ES2),		(IEN  | PTU | EN  | M3)) \
 	MUX_VAL(CP(ETK_D8_ES2),		(IEN  | PTD | EN  | M3)) \
 	MUX_VAL(CP(ETK_D9_ES2),		(IEN  | PTD | EN  | M3)) \
-	MUX_VAL(CP(ETK_D10_ES2),	(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(ETK_D10_ES2),	(IDIS | PTD | EN  | M4)) \
+					/* gpio_24 */\
 	MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTD | DIS | M4)) \
-	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTD | DIS | M3)) \
+	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTD | DIS | M4)) \
+					/* gpio_26 */\
 	MUX_VAL(CP(ETK_D13_ES2),	(IEN  | PTD | DIS | M3)) \
-	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTD | DIS | M3)) \
-	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTD | DIS | M3)) \
+	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTD | DIS | M4)) \
+					/* gpio_29 */\
 	/* Die to Die */\
 	MUX_VAL(CP(D2D_MCAD34),		(IEN  | PTD | EN  | M0)) \
 	MUX_VAL(CP(D2D_MCAD35),		(IEN  | PTD | EN  | M0)) \