summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorHeiko Schocher <hs@denx.de>2013-12-02 07:47:22 +0100
committerAndreas Bießmann <andreas.devel@googlemail.com>2013-12-09 13:21:49 +0100
commit0f8bc283a3253e6fc461a85daa4cd12f17f3f35c (patch)
treeb57b7137a6c0c647076f95ac6992d29cfd08e733 /board
parentbcf9fe37f5342aeebbf98a9e3800f578387b4fd7 (diff)
arm, at91: add Siemens board taurus and axm
enable support for the siemens AT91SAM9G20 based boards taurus and axm. Signed-off-by: Roger Meier <r.meier@siemens.com> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Diffstat (limited to 'board')
-rw-r--r--board/siemens/taurus/Makefile18
-rw-r--r--board/siemens/taurus/taurus.c160
2 files changed, 178 insertions, 0 deletions
diff --git a/board/siemens/taurus/Makefile b/board/siemens/taurus/Makefile
new file mode 100644
index 0000000000..a26fb92147
--- /dev/null
+++ b/board/siemens/taurus/Makefile
@@ -0,0 +1,18 @@
+#
+# Makefile for Siemens TAURUS (AT91SAM9G20) based board
+# (C) Copyright 2013 Siemens AG
+#
+# Based on:
+# U-Boot file: board/atmel/at91sam9260ek/Makefile
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian@popies.net>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += taurus.o
diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c
new file mode 100644
index 0000000000..673b3029a6
--- /dev/null
+++ b/board/siemens/taurus/taurus.c
@@ -0,0 +1,160 @@
+/*
+ * Board functions for Siemens TAURUS (AT91SAM9G20) based boards
+ * (C) Copyright Siemens AG
+ *
+ * Based on:
+ * U-Boot file: board/atmel/at91sam9260ek/at91sam9260ek.c
+ *
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91sam9260_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam9_sdramc.h>
+#include <atmel_mci.h>
+
+#include <net.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_CMD_NAND
+static void taurus_nand_hw_init(void)
+{
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+ struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+ unsigned long csa;
+
+ /* Assign CS3 to NAND/SmartMedia Interface */
+ csa = readl(&matrix->ebicsa);
+ csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA;
+ writel(csa, &matrix->ebicsa);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[3].setup);
+ writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(3) |
+ AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(3),
+ &smc->cs[3].pulse);
+ writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7),
+ &smc->cs[3].cycle);
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
+ AT91_SMC_MODE_DBW_8 |
+ AT91_SMC_MODE_TDF_CYCLE(3),
+ &smc->cs[3].mode);
+
+ /* Configure RDY/BSY */
+ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+
+ /* Enable NandFlash */
+ at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void taurus_macb_hw_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ /* Enable EMAC clock */
+ writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
+
+ /*
+ * Disable pull-up on:
+ * RXDV (PA17) => PHY normal mode (not Test mode)
+ * ERX0 (PA14) => PHY ADDR0
+ * ERX1 (PA15) => PHY ADDR1
+ * ERX2 (PA25) => PHY ADDR2
+ * ERX3 (PA26) => PHY ADDR3
+ * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0
+ *
+ * PHY has internal pull-down
+ */
+ at91_set_pio_pullup(AT91_PIO_PORTA, 14, 0);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 15, 0);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 17, 0);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 25, 0);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 26, 0);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 28, 0);
+
+ at91_phy_reset();
+
+ at91_set_gpio_input(AT91_PIN_PA25, 1); /* ERST tri-state */
+
+ /* Re-enable pull-up */
+ at91_set_pio_pullup(AT91_PIO_PORTA, 14, 1);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 15, 1);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 17, 1);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 25, 1);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 26, 1);
+ at91_set_pio_pullup(AT91_PIO_PORTA, 28, 1);
+
+ /* Initialize EMAC=MACB hardware */
+ at91_macb_hw_init();
+}
+#endif
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+int board_mmc_init(bd_t *bd)
+{
+ at91_mci_hw_init();
+
+ return atmel_mci_init((void *)ATMEL_BASE_MCI);
+}
+#endif
+
+int board_early_init_f(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ /* Enable clocks for all PIOs */
+ writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
+ (1 << ATMEL_ID_PIOC),
+ &pmc->pcer);
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+ at91_seriald_hw_init();
+#ifdef CONFIG_CMD_NAND
+ taurus_nand_hw_init();
+#endif
+#ifdef CONFIG_MACB
+ taurus_macb_hw_init();
+#endif
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_MACB
+ rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0x00);
+#endif
+ return rc;
+}