ARM: IXP: Remove actux2 board

The board is unmaintained, just like the rest of the IXP.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Michael Schwingen <michael@schwingen.org>
Cc: Tom Rini <trini@ti.com>

4 files changed, 0 insertions, 272 deletions

diff --git a/board/actux2/Makefile b/board/actux2/Makefile
deleted file mode 100644
index 24cbff1b47..0000000000
--- a/board/actux2/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= actux2.o
diff --git a/board/actux2/actux2.c b/board/actux2/actux2.c
deleted file mode 100644
index e578cd0996..0000000000
--- a/board/actux2/actux2.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * (C) Copyright 2007
- * Michael Schwingen, michael@schwingen.org
- *
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <malloc.h>
-#include <asm/arch/ixp425.h>
-#include <asm/io.h>
-
-#include <miiphy.h>
-
-#include "actux2_hw.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
-	/* CS1: IPAC-X */
-	writel(0x94d10013, IXP425_EXP_CS1);
-	/* CS5: Debug port */
-	writel(0x9d520003, IXP425_EXP_CS5);
-	/* CS6: HW release register */
-	writel(0x81860001, IXP425_EXP_CS6);
-	/* CS7: LEDs */
-	writel(0x80900003, IXP425_EXP_CS7);
-
-	return 0;
-}
-
-int board_init(void)
-{
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0x00000100;
-
-	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_IORST);
-	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_ETHRST);
-	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DSR);
-	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DCD);
-
-	GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST);
-	GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_ETHRST);
-
-	GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_DSR);
-	GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_DCD);
-
-	/* Setup GPIOs for Interrupt inputs */
-	GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_DBGINT);
-	GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_ETHINT);
-
-	/* Setup GPIOs for 33MHz clock output */
-	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK);
-	GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK);
-	writel(0x011001FF, IXP425_GPIO_GPCLKR);
-
-	udelay(533);
-	GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST);
-	GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_ETHRST);
-
-	ACTUX2_LED1(1);
-	ACTUX2_LED2(0);
-	ACTUX2_LED3(0);
-	ACTUX2_LED4(0);
-
-	return 0;
-}
-
-/*
- * Check Board Identity
- */
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	puts("Board: AcTux-2 rev.");
-	putc(ACTUX2_BOARDREL + 'A' - 1);
-
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20);
-	return 0;
-}
-
-/*************************************************************************
- * get_board_rev() - setup to pass kernel board revision information
- * 0 = reserved
- * 1 = Rev. A
- * 2 = Rev. B
- *************************************************************************/
-u32 get_board_rev(void)
-{
-	return ACTUX2_BOARDREL;
-}
-
-void reset_phy(void)
-{
-	/* init IcPlus IP175C ethernet switch to native IP175C mode */
-	miiphy_write("NPE0", 29, 31, 0x175C);
-}
diff --git a/board/actux2/actux2_hw.h b/board/actux2/actux2_hw.h
deleted file mode 100644
index 57c6fa7076..0000000000
--- a/board/actux2/actux2_hw.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * (C) Copyright 2007
- * Michael Schwingen, michael@schwingen.org
- *
- * hardware register definitions for the AcTux-2 board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _ACTUX2_HW_H
-#define _ACTUX2_HW_H
-
-/* 0 = LED off,1 = green, 2 = red, 3 = orange */
-#define ACTUX2_LED1(a)	writeb((a ? 2 : 0), IXP425_EXP_BUS_CS7_BASE_PHYS + 0)
-#define ACTUX2_LED2(a)	writeb((a ? 2 : 0), IXP425_EXP_BUS_CS7_BASE_PHYS + 1)
-#define ACTUX2_LED3(a)	writeb((a ? 0 : 2), IXP425_EXP_BUS_CS7_BASE_PHYS + 2)
-#define ACTUX2_LED4(a)	writeb((a ? 0 : 2), IXP425_EXP_BUS_CS7_BASE_PHYS + 3)
-
-#define ACTUX2_DBG_PORT	IXP425_EXP_BUS_CS5_BASE_PHYS
-#define ACTUX2_BOARDREL	(readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0x0F)
-#define ACTUX2_OPTION	(readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0xF0)
-
-/*
- * GPIO settings
- */
-#define CONFIG_SYS_GPIO_DBGINT			0
-#define CONFIG_SYS_GPIO_ETHINT			1
-#define CONFIG_SYS_GPIO_ETHRST			2	/* Out */
-#define CONFIG_SYS_GPIO_LED5_GN		3	/* Out */
-#define CONFIG_SYS_GPIO_UNUSED4		4
-#define CONFIG_SYS_GPIO_UNUSED5		5
-#define CONFIG_SYS_GPIO_DSR			6	/* Out */
-#define CONFIG_SYS_GPIO_DCD			7	/* Out */
-#define CONFIG_SYS_GPIO_IPAC_INT		8
-#define CONFIG_SYS_GPIO_DBGJUMPER		9
-#define CONFIG_SYS_GPIO_BUTTON1		10
-#define CONFIG_SYS_GPIO_DBGSENSE		11
-#define CONFIG_SYS_GPIO_DTR			12
-#define CONFIG_SYS_GPIO_IORST			13	/* Out */
-#define CONFIG_SYS_GPIO_PCI_CLK		14	/* Out */
-#define CONFIG_SYS_GPIO_EXTBUS_CLK		15	/* Out */
-
-#endif
diff --git a/board/actux2/u-boot.lds b/board/actux2/u-boot.lds
deleted file mode 100644
index f00d7c72b1..0000000000
--- a/board/actux2/u-boot.lds
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_FORMAT ("elf32-bigarm", "elf32-bigarm", "elf32-bigarm")
-OUTPUT_ARCH (arm)
-ENTRY (_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN (4);
-	.text : {
-		*(.__image_copy_start)
-		arch/arm/cpu/ixp/start.o(.text*)
-		net/built-in.o(.text*)
-		board/actux2/built-in.o(.text*)
-		arch/arm/cpu/ixp/built-in.o(.text*)
-		drivers/input/built-in.o(.text*)
-
-		. = env_offset;
-		common/env_embedded.o(.ppcenv)
-		*(.text*)
-	}
-
-	. = ALIGN(4);
-	.rodata : {
-		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-	}
-	. = ALIGN(4);
-	.data : {
-		*(.data*)
-	}
-	. = ALIGN(4);
-	.got : {
-		*(.got)
-	}
-	. =.;
-
-	. = ALIGN(4);
-	.u_boot_list : {
-		KEEP(*(SORT(.u_boot_list*)));
-	}
-
-	. = ALIGN (4);
-
-	.image_copy_end :
-	{
-		*(.__image_copy_end)
-	}
-
-	.rel_dyn_start :
-	{
-		*(.__rel_dyn_start)
-	}
-
-	.rel.dyn : {
-		*(.rel*)
-	}
-
-	.rel_dyn_end :
-	{
-		*(.__rel_dyn_end)
-	}
-
-	_end = .;
-
-/*
- * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
- * __bss_base and __bss_limit are for linker only (overlay ordering)
- */
-
-	.bss_start __rel_dyn_start (OVERLAY) : {
-		KEEP(*(.__bss_start));
-		__bss_base = .;
-	}
-
-	.bss __bss_base (OVERLAY) : {
-		*(.bss*)
-		 . = ALIGN(4);
-		 __bss_limit = .;
-	}
-	.bss_end __bss_limit (OVERLAY) : {
-		KEEP(*(.__bss_end));
-	}
-
-	.dynsym _end : { *(.dynsym) }
-	.dynbss : { *(.dynbss) }
-	.dynstr : { *(.dynstr*) }
-	.dynamic : { *(.dynamic*) }
-	.hash : { *(.hash*) }
-	.plt : { *(.plt*) }
-	.interp : { *(.interp*) }
-	.gnu : { *(.gnu*) }
-	.ARM.exidx : { *(.ARM.exidx*) }
-}